arXiv subjects

Conor O'Toole

Publications and source records attributed to Conor O'Toole.

6 recordsLinked to original sources

arXiv2026

Waveform Modelling for the Laser Interferometer Space Antenna

LISA, the Laser Interferometer Space Antenna, will usher in a new era in gravitational-wave astronomy. As the first anticipated space-based gravitational-wave detector, it will expand our view to the millihertz gravitational-wave sky, where a spectacular variety of interesting new sources abound: from millions of ultra-compact binaries in our Galaxy, to mergers of massive black holes at cosmological distances; from the beginnings of inspirals that will venture into the ground-based detectors' view to the death spiral of compact objects into massive black holes, and many sources in between. Central to realising LISA's discovery potential are waveform models, the theoretical and phenomenological predictions of the pattern of gravitational waves that these sources emit. This white paper is presented on behalf of the Waveform Working Group for the LISA Consortium. It provides a review of the current state of waveform models for LISA sources, and describes the significant challenges that must yet be overcome.

gr-qc↗

arXiv2022

A compact instrument for gamma-ray burst detection on a CubeSat platform II: Detailed design, assembly and validation

The Gamma-ray Module, GMOD, is a miniaturised novel gamma-ray detector which will be the primary scientific payload on the Educational Irish Research Satellite (EIRSAT-1) 2U CubeSat mission. GMOD comprises a compact (25mm $\times$ 25mm $\times$ 40mm) cerium bromide scintillator coupled to a tiled array of 4$\times$4 silicon photomultipliers, with front-end readout provided by the IDE3380 SIPHRA. This paper presents the detailed GMOD design and the accommodation of the instrument within the restrictive CubeSat form factor. The electronic and mechanical interfaces are compatible with many off-the-shelf CubeSat systems and structures. The energy response of the GMOD engineering qualification model has been determined using radioactive sources, and an energy resolution of 5.4% at 662keV has been measured. EIRSAT-1 will perform on-board processing of GMOD data. Trigger results, including light-curves and spectra, will be incorporated into the spacecraft beacon and transmitted continuously. Inexpensive hardware can be used to decode the beacon signal, making the data accessible to a wide community. GMOD will have scientific capability for the detection of gamma-ray bursts, in addition to the educational and technology demonstration goals of the EIRSAT-1 mission. The detailed design and measurements to date demonstrate the capability of GMOD in low Earth orbit, the scalability of the design for larger CubeSats and as an element of future large gamma-ray missions.

astro-ph.IM↗

arXiv2021

Embedded Firmware Development for a Novel CubeSat Gamma-Ray Detector

The Gamma-ray Module (GMOD) is an experiment designed for the detection of gamma-ray bursts in low Earth orbit as the principal scientific payload on a 2-U CubeSat, EIRSAT-1. GMOD comprises a cerium bromide scintillator coupled to silicon photomultipliers which are processed and digitised by a bespoke ASIC. Custom firmware on the GMOD motherboard has been designed, implemented and tested for the MSP430 microprocessor which manages the experiment including readout, storage and configuration of the system. The firmware has been verified in a series of experiments testing the response over a realistic range of input detector trigger frequencies from 50Hz to 1kHz for the primary time tagged event (TTE) data. The power consumption and ability of the firmware to successfully receive and transmit the packets to the on-board computer was investigated. The experiment demonstrated less than 1% loss of packets up to 1kHz for the standard transfer mode with the power not exceeding 31mW. The transfer performance and power consumption demonstrated are within the required range of this CubeSat instrument.

astro-ph.IM↗

arXiv2021

Characteristic formulation of the Regge-Wheeler and Zerilli Green functions

We present a characteristic initial value approach to calculating the Green function of the Regge-Wheeler and Zerilli equations. We combine well-known numerical methods with newly derived initial data to obtain a scheme which can in principle be generalised to any desired order of convergence. We demonstrate the approach with implementations up to sixth-order in the grid spacing. By combining the results of our numerical code with late-time tail expansions and methods of subtracting the direct part of the Green function, we show that the scalar self-force in Schwarzschild spacetime can be computed to better accuracy than previous Green-function based approaches. We also demonstrate agreement with frequency-domain methods for computing the Green function in the gravitational case. Finally, we apply the Regge-Wheeler and Zerilli Green functions to the computation of the gravitational energy flux.

gr-qc↗

arXiv2020

Assembly, Integration, and Verification Activities for a 2U CubeSat, EIRSAT-1

The Educational Irish Research Satellite, EIRSAT-1, is a project developed by students at University College Dublin that aims to design, build, and launch Ireland's first satellite. EIRSAT-1 is a 2U CubeSat incorporating three novel payloads; GMOD, a gamma-ray detector, EMOD, a thermal coating management experiment, and WBC, a novel attitude control algorithm. The EIRSAT-1 project is carried out with the support of the Education Office of the European Space Agency, under the educational Fly your Satellite! programme. The Assembly, Integration and Verification plan for EIRSAT-1 is central to the philosophy and the development of the spacecraft. The model philosophy employed for the project is known as the 'prototype' approach in which two models of the spacecraft are assembled; an Engineering Qualification Model (EQM) and a Flight Model (FM). The payloads, GMOD and EMOD, and the Antenna Deployment Module (ADM) platform element warrant a Development Model in addition to an EQM and a FM, as they have been designed and developed in-house. After successful completion of the Critical Design Review and Ambient Test Readiness Review phases of the project, the EQM of EIRSAT-1 will be assembled and integrated. After assembly and integration of the EQM, the project will begin the ambient test campaign, in which the EQM undergoes ambient functional and mission testing. This work details the preparation and execution of the assembly, integration, and verification activities of EIRSAT-1 EQM.

astro-ph.IM↗

arXiv2020

Flight Software Development for the EIRSAT-1 Mission

The Educational Irish Research Satellite, known as EIRSAT-1, is a student-led project to design, build, test and launch Ireland's first satellite. The on-board software for this mission is being developed using Bright Ascension's GenerationOne Flight Software Development Kit. This paper provides an overview of this kit and of EIRSAT-1's on-board software design. Drawing on the team's contrasting experience with writing entirely custom firmware for the mission's science payloads, this work discusses the impact of using a kit on the software development process. The challenges associated with the educational nature of this project are the focus of this discussion. The objective of this paper is to provide useful information for other CubeSat teams assessing software development options.

astro-ph.IM↗