arXiv subjects

Constantinos Psomas

Publications and source records attributed to Constantinos Psomas.

At least 19 recordsLinked to original sources

arXiv2026

On-Off Digital Noise Modulation with Fluid Antenna Systems over $\kappa$-$\mu$ Fading Channels

This letter proposes the integration of on-off digital noise (OODN) modulation with fluid antenna systems (FASs). A unified analytical framework is developed to evaluate the performance of FAS- assisted OODN receivers over additive white Gaussian noise and generalized \k{appa}-{\mu} fading channels. The analysis incorporates fluid antenna port selection, the number of available ports, and spatial correlation. Analytical expressions for the average bit error probability are derived and the achievable diversity order is characterized. All expressions are validated through Monte Carlo simulations. Results demonstrate that the spatial diversity provided by the FAS significantly enhances the reliability of OODN transmissions while preserving their inherent low-complexity, non-coherent operation without carrier-phase recovery. The proposed framework establishes a new research direction for energy-efficient Internet of Things (IoT) and machine-type communication systems.

eess.SP↗

arXiv2026

Constellation Design for Nonlinear Unified SWIPT Receiver Channels with Memory

Unified receivers (URs) have emerged as a promising architecture for simultaneous wireless information and power transfer (SWIPT), since a common rectifying front-end enables information decoding (ID) and energy harvesting (EH) from the same rectified output. However, rectification is nonlinear due to the diode, while the capacitor introduces memory across symbols, making constellation design over the channel challenging. In this paper, we study constellation design for nonlinear UR-SWIPT channels in both memoryless and memory regimes. First, we propose a tractable unified rectification model that captures both (i) the nonlinear steady-state mapping and (ii) the asymmetric capacitor charging/discharging dynamics under transient operation. To isolate the impact of rectification with memory on ID, we study the information-based design. In this setting, we develop a state-adaptive policy with an algorithmic constellation design that accounts for the rectifier state and shapes the constellation in the observation domain. By approximating the rectifier state distribution, we derive a closed-form average symbol error rate (SER) expression and characterize the rate-reliability (R-R) tradeoff. We then seek constellations that minimize the SER under average transmit power and EH constraints. We address the resulting energy-constrained setting in the memoryless regime using an autoencoder-based framework that embeds the nonlinear rectification model as a differentiable channel block. Numerical results validate the proposed models, demonstrate the impact of memory on the R-R tradeoff, and show how learned constellations adapt to EH requirements in the rate-energy tradeoff.

eess.SP↗

arXiv2026

Large-scale Tunable Liquid Lens-assisted VLC Systems under Random Receiver Orientation

This paper investigates the performance of tunable liquid lens (TLL)-assisted receivers in large-scale visible light communication (VLC) systems under random receiver orientation. A simple electrowetting-based TLL architecture is proposed, capable of dynamically steering the incident optical signal toward the photodiode receiver by adjusting the orientation of the liquid interface. The proposed architecture enhances the desired signal reception while mitigating interference from neighboring access points (APs). The spatial distribution of APs is modeled using a Mat\'ern hard-core point process, whereas receiver orientation is characterized by uniformly distributed azimuth angles and Gaussian-distributed polar angles. Furthermore, a tractable mathematical optical channel model is developed to capture the combined effects of AP/receiver locations, receiver orientation, and lens adjustment angles on the VLC channel gain. Based on this framework, three lens orientation strategies, namely best signal reception (BSR), closest LED selection, and vertical upward lens orientation, are proposed to improve system performance under dynamic receiver conditions. Using stochastic geometry tools, exact and approximate analytical expressions for the outage probability are derived for each scheme. Numerical results verify the accuracy of the developed analysis and demonstrate that the proposed TLL-assisted receiver architecture significantly improves the robustness of VLC systems under severe receiver orientation fluctuations and dense AP deployments. In particular, the BSR scheme reduces the outage probability by $57.1\%$ compared with conventional fixed-lens receivers at an AP height of $3.5$ m and AP density of $0.2~\text{m}^{-2}$. The presented analytical framework and numerical results provide useful design insights for the deployment of future TLL-assisted VLC networks.

eess.SP↗

arXiv2026

Dual-Diode Unified SWIPT for High Data Rates with Adaptive Detection

Due to their low-complexity and energy-efficiency, unified simultaneous wireless information and power transfer (U-SWIPT) receivers are especially suitable for low-power Internet of Things (IoT) applications. Towards accurately modeling practical operating conditions, in this study, we provide a unified transient framework for a dual-diode U-SWIPT that jointly accounts for diode nonlinearity and capacitor-induced memory effects. The proposed model accurately describes the inherent time dependence of the rectifier, highlighting its fundamental impact on both energy harvesting (EH) and information decoding (ID) processes. Based on the provided memory-aware model, we design a low-complexity adaptive detector that learns the nonlinear state transition dynamics and performs decision-directed detection with linear complexity. The proposed detection scheme approaches maximum likelihood sequence detection (MLSD) performance in memory-dominated regimes, while avoiding the exponential search required by classical sequence detection. Overall, these results demonstrate that properly exploiting rectifier memory provides a better tradeoff between data rate and reliability for U-SWIPT receivers.

eess.SP↗

arXiv2025

Sub-6 GHz Beam-Reconfigurable Microfluidic Antenna Using Graphene Liquid for 5G Network

As wireless communication systems continue to grow rapidly, high-performance antennas become increasingly crucial for expanding coverage, improving capacity, and enhancing transmission quality. In light of this, research has focused considerable attention on liquid antennas due to their unique characteristics, which include small size, flexibility, reconfigurability and transparency. Recently, graphene liquid has been explored for numerous applications due to its low cost, high conductivity, flexibility, and ease of processing. Specifically for antenna applications, graphene liquid performs better than conventional liquid metal. This paper presents a graphene-liquid antenna with beam reconfiguration ability for sub-6 GHz communication system. The graphene-liquid movement within the microfluidic channel is taken into consideration by the reconfiguration mechanism. The antenna achieves beam reconfiguration in 360{\deg} directions with 6 dBi of gain at 5.5 GHz, featuring a wideband impedance bandwidth of 24%. The antenna main beam is specifically reconfigured into six directions (0{\deg}, 45{\deg}, 135{\deg}, 180{\deg}, 225{\deg} and 315{\deg}) at 5.5 GHz. Additionally, in all six reconfigurable scenarios at 5.5 GHz, the antenna provides a stable reflection coefficient. Therefore, for the next generation of wireless communication systems, this novel design of graphene-liquid-based reconfigurable sub-6 GHz antennas holds promise.

eess.SP↗

arXiv2025

Harnessing Chaotic Signals for Wireless Information and Power Transfer

Chaotic dynamical systems have attracted considerable attention due to their inherent randomness and high sensitivity to initial conditions, which makes them ideal for secure wireless communications. Beyond security, these same characteristics also make chaotic signals particularly effective for wireless power transfer (WPT) applications. On the other hand, connectivity along with self-sustainability are the two cornerstones of the upcoming sixth generation (6G) standard for radio communications. Consequently, with the massive increase in wireless devices and sensors, the concept of self-sustainable wireless networks is becoming more relevant. The aspect of WPT to the widely spread wireless devices and simultaneous wireless information and power transfer (SWIPT) among these devices will play a crucial role in the 6G communication systems. In this context, it has been experimentally observed that chaotic signals result in better WPT performance as compared to the existing benchmark schemes. Hence, in this paper, we characterize the generalized WPT performance of the multi-dimensional chaotic signals and present the use case of the Lorenz and the Henon chaotic systems. Moreover, we provide a novel differential chaos shift keying (DCSK)-based WPT receiver architecture ideal for enhanced energy harvesting (EH). Furthermore, we propose DCSK-based transmit waveform designs for multi-antenna SWIPT architectures and investigate the impact of the rate-energy trade-off. Our goal is to explore these aspects of the chaotic signals and discuss their relevance in the context of both WPT and SWIPT.

eess.SP↗

arXiv2025

Lightwave Power Transfer-Enabled Underwater Optical ISAC Systems under Ship Attitude Variation

In this paper, we propose a lightwave power transfer-enabled underwater optical integrated sensing and communication (O-ISAC) system, where an access point (AP) mounted on a seasurface ship transmits lightwave signals to two nodes, namely ($i$) a seabed sensor that harvests energy and transmits uplink information to the AP, and ($ii$) a sensing target whose position is estimated by the AP using an array of pinhole cameras. To capture practical deployment conditions, the ship attitude variation is modeled through its roll, pitch, and yaw angles, each following a Gaussian distribution under low-to-moderate sea states. Closed-form approximations are derived for the mean squared error (MSE) of target localization and the achievable uplink data rate. Analytical and simulation results demonstrate excellent agreement, validating the proposed models and derived expressions, while revealing the fundamental communication-sensing tradeoff in the O-ISAC system. The results further provide valuable design insights, including the optimal camera placement on the ship to minimize localization error, achieving a minimum MSE of $10^{-2}$ $\text{m}^2$ with multiple cameras under roll, pitch, and yaw angle variation of $10^{\circ}$, and the optimal harvest-use ratio of $0.55$ for the considered setup.

eess.SY↗

arXiv2025

1-bit RIS-aided Index Modulation with Quantum Annealing

In this paper, we investigate a new index modulation (IM) scheme for reconfigurable intelligent surface (RIS)-assisted communications with 1-bit RIS phase resolution. In addition to the traditional modulated symbols, extra bits of information are embedded in the binary RIS phase vector by indexing the cardinality of the positive phases shifts. To maximize capacity, the IM-based RIS vector is selected so as to maximize the signal-to-noise ratio at the receiver. The proposed IM design requires the solution of a quadratic binary optimization problem with an equality constraint at the transmitter as well as a quadratic unconstrained binary optimization (QUBO) problem at the receiver. Since commercial solvers cannot directly handle constraints, a penalty method that embeds the equality constraint in the objective function is investigated. To overcome the empirical tuning of the penalty parameter, an iterative Augmented Lagrangian optimization technique is also investigated where a QUBO problem is solved at each iteration. The proposed design and associated mathematical framework are tested in a real-world quantum annealing device provided by D-WAVE. Rigorous experimental results demonstrate that the D-WAVE heuristic efficiently solves the considered combinatorial problems. Furthermore, theoretical bounds on the average capacity are provided. Both experimental and theoretical results show that the proposed design outperforms conventional counterparts.

cs.IT↗

arXiv2025

Chaotic Noncoherent SWIPT in Multi-Functional RIS-Aided Systems

In this letter, we investigate the design of chaotic signal-based transmit waveforms in a multi-functional reconfigurable intelligent surface (MF-RIS)-aided set-up for simultaneous wireless information and power transfer. We propose a differential chaos shift keying-based MF-RIS-aided set-up, where the MF-RIS is partitioned into three non-overlapping surfaces. The elements of the first sub-surface perform energy harvesting (EH), which in turn, provide the required power to the other two sub-surfaces responsible for transmission and reflection of the incident signal. By considering a frequency selective scenario and a realistic EH model, we characterize the chaotic MF-RIS-aided system in terms of its EH performance and the associated bit error rate. Thereafter, we characterize the harvested energy-bit error rate trade-off and derive a lower bound on the number of elements required to operate in the EH mode. Accordingly, we propose novel transmit waveform designs to demonstrate the importance of the choice of appropriate system parameters in the context of achieving self-sustainability.

eess.SY↗

arXiv2025

Outage Probability Analysis of Tunable Liquid Lens-assisted VLC Systems

This paper presents a tunable liquid lens (TLL)-assisted indoor mobile visible light communication system. To mitigate performance degradation caused by user mobility and random receiver orientation, an electrowetting cuboid TLL is used at the receiver. By dynamically controlling the orientation angle of the liquid surface through voltage adjustments, signal reception and overall system performance are enhanced. An accurate mathematical framework is developed to model channel gains, and two lens optimization strategies, namely ($i$) the best signal reception (BSR), and ($ii$) the vertically upward lens orientation (VULO) are introduced for improved performance. Closed form expressions for the outage probability are derived for each scheme for practical mobility and receiver orientation conditions. Numerical results demonstrate that the proposed TLL and lens adjustment strategies significantly reduce the outage probability compared to fixed lens and no lens receivers across various mobility and orientation conditions. Specifically, the outage probability is improved from $1\times 10^{-1}$ to $3\times 10^{-3}$ at a transmit power of $12$ dBW under a $8^{\circ}$ polar angle variation in random receiver orientation using the BSR scheme.

eess.SP↗

arXiv2024

An RIS-enabled Time Reversal Scheme for Multipath Near-Field Channels

Time reversal (TR) is a promising technique that exploits multipaths for achieving energy focusing in high-frequency wideband communications. In this letter, we focus on a TR scheme facilitated by a reconfigurable intelligent surface (RIS) which, due to the higher frequency and large array aperture, operates in the near-field region. The proposed scheme enriches the propagation environment for the TR in such weak scattering conditions and does not need channel knowledge for the RIS configuration. Specifically, the RIS is employed to create multiple virtual propagation paths that are required to efficiently apply the TR. We derive a performance bound for the proposed scheme under near-field modeling through the received signal-to-noise ratio (SNR) and we examine how various system design parameters affect the performance. We observe that a linear RIS topology maximizes the number of resolvable paths. It is also demonstrated that the proposed scheme improves the SNR, while for a large number of elements it can outperform the conventional passive beamforming at the RIS.

eess.SP↗

arXiv2024

DCSK-based Waveform Design for Self-sustainable RIS-aided Noncoherent SWIPT

This paper investigates the problem of transmit waveform design in the context of a chaotic signal-based self-sustainable reconfigurable intelligent surface (RIS)-aided system for simultaneous wireless information and power transfer (SWIPT). Specifically, we propose a differential chaos shift keying (DCSK)-based RIS-aided point-to-point set-up, where the RIS is partitioned into two non-overlapping surfaces. The elements of the first sub-surface perform energy harvesting (EH), which in turn, provide the required power to the other sub-surface operating in the information transfer (IT) mode. In this framework, by considering a generalized frequency-selective Nakagami-m fading scenario as well as the nonlinearities of the EH process, we derive closed-form analytical expressions for both the bit error rate (BER) at the receiver and the harvested power at the RIS. Our analysis demonstrates, that both these performance metrics depend on the parameters of the wireless channel, the transmit waveform design, and the number of reflecting elements at the RIS, which switch between the IT and EH modes, depending on the application requirements. Moreover, we show that, having more reflecting elements in the IT mode is not always beneficial and also, for a given acceptable BER, we derive a lower bound on the number of RIS elements that need to be operated in the EH mode. Furthermore, for a fixed RIS configuration, we investigate a trade-off between the achievable BER and the harvested power at the RIS and accordingly, we propose appropriate transmit waveform designs. Finally, our numerical results illustrate the importance of our intelligent DCSK-based waveform design on the considered framework.

eess.SP↗

arXiv2024

Wireless Information and Energy Transfer in the Era of 6G Communications

Wireless information and energy transfer (WIET) represents an emerging paradigm which employs controllable transmission of radio-frequency signals for the dual purpose of data communication and wireless charging. As such, WIET is widely regarded as an enabler of envisioned 6G use cases that rely on energy-sustainable Internet-of-Things (IoT) networks, such as smart cities and smart grids. Meeting the quality-of-service demands of WIET, in terms of both data transfer and power delivery, requires effective co-design of the information and energy signals. In this article, we present the main principles and design aspects of WIET, focusing on its integration in 6G networks. First, we discuss how conventional communication notions such as resource allocation and waveform design need to be revisited in the context of WIET. Next, we consider various candidate 6G technologies that can boost WIET efficiency, namely, holographic multiple-input multiple-output, near-field beamforming, terahertz communication, intelligent reflecting surfaces (IRSs), and reconfigurable (fluid) antenna arrays. We introduce respective WIET design methods, analyze the promising performance gains of these WIET systems, and discuss challenges, open issues, and future research directions. Finally, a near-field energy beamforming scheme and a power-based IRS beamforming algorithm are experimentally validated using a wireless energy transfer testbed. The vision of WIET in communication systems has been gaining momentum in recent years, with constant progress with respect to theoretical but also practical aspects. The comprehensive overview of the state of the art of WIET presented in this paper highlights the potentials of WIET systems as well as their overall benefits in 6G networks.

cs.IT↗

arXiv2024

Integrated SWIPT Receiver with Memory Effects: Circuit Analysis and Information Detection

Wireless power transfer has been proposed as a key technology for the foreseen machine type networks. A main challenge in the research community lies in acquiring a simple yet accurate model to capture the energy harvesting performance. In this work, we focus on a half-wave rectifier and based on circuit analysis we provide the actual output of the circuit which accounts for the memory introduced by the capacitor. The provided expressions are also validated through circuit simulations on ADS. Then, the half-wave rectifier is used as an integrated simultaneous wireless information and power transfer receiver where the circuit's output is used for decoding information based on amplitude modulation. We investigate the bit error rate performance based on two detection schemes: (i) symbol-by-symbol maximum likelihood (ML); and (ii) ML sequence detection (MLSD). We show that the symbol period is critical due to the intersymbol interference induced by circuit. Our results reveal that MLSD is necessary towards improving the error probability and achieving higher data rates.

eess.SP↗

arXiv2024

Advanced Channel Coding Designs for Index-Modulated Fluid Antenna Systems

The concept of fluid antennas (FAs) has emerged as a promising solution to enhance the spectral efficiency of wireless networks, achieved by introducing additional degrees of freedom, including reconfigurability and flexibility. In this paper, we investigate the use of index-modulated (IM) transmissions within the framework of FA systems, where an FA position is activated during each transmission interval. This approach is motivated by the common characteristics exhibited by FAs and IM transmissions, which entails the use of a single radio-frequency chain. From this perspective, we derive a closed-form expression for the bit error rate of IM-FAs considering spatial correlation, and demonstrating superior performance compared to conventional IM systems. To enhance the performance of IM-FAs in correlated conditions, channel coding techniques are applied. We first analyze a set partition coding (SPC) scheme for IM-FAs to spatially separate the FA ports, and provide a tight performance bound over correlated channels. Furthermore, the spatial SPC scheme is extended to turbo-coded modulation where the performance is analyzed for low and high signal-to-noise ratios. Our results reveal that through the implementation of channel coding techniques designed for FAs and IM transmission, the performance of coded IM-FAs exhibits notable enhancements, particularly in high correlation scenarios.

cs.IT↗

arXiv2023

Superimposed Chirp Waveforms for SWIPT with Diplexer-based Integrated Receivers

In this paper, we present the superposition of chirp waveforms for simultaneous wireless information and power transfer (SWIPT) applications. Exploiting the chirp waveform characteristics enables us to superimpose multiple chirps, thereby allowing transmission of the same number of waveforms over less bandwidth. This enables us to perform subband selection when operating over set of orthogonal subbands. Furthermore, we consider a user equipped with a diplexer-based integrated receiver (DIR), which enables to extract radio frequency power and decode information from the same signal without splitting. Thereby, incorporating chirp superposition and subband selection, a transmission scheme is proposed to exploit both the diode's nonlinearity and frequency diversity. We derive novel closed-form analytical expressions of the average harvested energy (HE) via transmission of superimposed chirp over selected subbands based on tools from order statistics. We also analyze the downlink information rate achieved at the user. Through our analytical and numerical results, for the considered system setup, we show that superimposed chirp-based SWIPT provides an improvement of 30$\%$ in average HE performance as compared to multisine waveforms consisting of a set of fixed-frequency cosine signals, improves the minimum level of HE in a multiuser network, and extends the operating range of energy transfer as compared to fixed-frequency waveforms. Furthermore, we illustrate that the inclusion of DIR at the receiver for SWIPT enlarges the energy-information transfer region when compared to the widely considered power splitting receiver.

eess.SP↗

arXiv2023

Continuous Fluid Antenna Systems: Modeling and Analysis

Fluid antennas (FAs) is a promising technology for introducing flexibility and reconfigurability in wireless networks. Recent research efforts have highlighted the potential gains that can be achieved in comparison to conventional antennas. These works assume that the FA has a discrete number of positions that the liquid can take. However, from a practical standpoint, the liquid moves in a continuous fashion to any point inside the FA. In this paper, we focus on a continuous FA system (CFAS) and present a general framework for its design and analytical evaluation. In particular, we derive closed-form analytical expressions for the level crossing rate (LCR) and the average fade duration of the continuous signal-to-interference ratio (SIR) process over the FA's length. Then, by leveraging the LCR expression, we characterize the system's outage performance with a bound on the cumulative distribution function of the SIR's supremum. Our results confirm that the CFAS outperforms its discrete counterpart and thus provides the performance limits of FA-based systems.

eess.SP↗

arXiv2023

Spatial Modulation with Energy Detection: Diversity Analysis and Experimental Evaluation

In this paper, we present a non-coherent energy detection scheme for spatial modulation (SM) systems. In particular, the use of SM is motivated by its low-complexity implementation in comparison to multiple-input multiple-output (MIMO) systems, achieved through the activation of a single antenna during transmission. Moreover, energy detection-based communications restrict the channel state information to the magnitude of the fading gains. This consideration makes the design applicable for low-cost low-powered devices since phase estimation and its associated circuitry are avoided. We derive an energy detection metric for a multi-antenna receiver based on the maximum-likelihood (ML) criterion. By considering a biased pulse amplitude modulation, we develop an analytical framework for the SM symbol error rate at high signal-to-noise ratios. Numerical results show that the diversity order is proportional to half the number of receive antennas; this result stems from having partial receiver channel knowledge. In addition, we compare the performance of the proposed scheme with that of the coherent ML receiver and show that the SM energy detector outperforms its coherent counterpart in certain scenarios, particularly when utilizing non-negative constellations. Ultimately, we implement an SM testbed using software-defined radio devices and provide experimental error rate measurements that validate our theoretical contribution.

cs.IT↗