arXiv subjects

Costas Galiotis

Publications and source records attributed to Costas Galiotis.

At least 19 recordsLinked to original sources

arXiv2025

Synthesis of graphene aerogels toward the absorption of liquid and gas pollutants

Environmental disasters, such as the oil spill in Mexico gulf or, more recently, the Mauritius oil spill caused by a bulk carrier vessel, are some of the ecological issues that the modern society faces frequently. These accidents highlight the need for development of efficient materials that can be employed to eliminate pollutants including crude oil and its derivatives, as well as toxic organic solvents. The objective of the present study is to achieve the synthesis of graphene aerogels with two main methods and to determine their efficiency as absorbents of liquid and gas pollutants. Graphene aerogels were prepared according to the information given by Hong et al. (2015) and Yang et al. (2015). Both methods are based on the chemical reduction of graphene oxide as the first step and the formation of the aerogel as the second, providing a more cost-effective solution and resulting in a lattice structure similar to graphene. The fabricated materials were investigated for their absorption capacity for liquid and gas pollutants. The specimens were mounted in airtight microenvironments saturated with a specific Volatile Organic Compound (VOC). Three VOCs were tested; formaldehyde, acetic acid and hydrochloric acid and the results were based on gravimetric measurements. In order to increase the accuracy of the obtained data, a VOCs sensor was used to measure the change of voltage before and after the introduction of graphene aerogels in a saturated microenvironment. Furthermore, the graphene aerogels were evaluated as absorbents in organic solvents, namely acetone, ethanol and methanol.

physics.app-ph↗

arXiv2024

Operando Characterization and Molecular Simulations Reveal the Growth Kinetics of Graphene on Liquid Copper during Chemical Vapor Deposition

In recent years, liquid metal catalysts have emerged as a compelling choice for the controllable, large-scale, and high-quality synthesis of two-dimensional materials. At present, there is little mechanistic understanding of the intricate catalytic process, though, of its governing factors or what renders it superior to growth at the corresponding solid catalysts. Here, we report on a combined experimental and computational study of the kinetics of graphene growth during chemical vapor deposition on a liquid copper catalyst. By monitoring the growing graphene flakes in real time using in situ radiation-mode optical microscopy, we explore the growth morphology and kinetics over a wide range of CH4-to-H2 pressure ratios and deposition temperatures. Constant growth rates of the flakes' radius indicate a growth mode limited by precursor attachment, whereas methane-flux-dependent flake shapes point to limited precursor availability. Large-scale free energy simulations enabled by an efficient machine-learning moment tensor potential trained to density-functional theory data provide quantitative barriers for key atomic-scale growth processes. The wealth of experimental and theoretical data can be consistently combined into a microkinetic model that reveals mixed growth kinetics that, in contrast to the situation at solid Cu, is partly controlled by precursor attachment alongside precursor availability. Key mechanistic aspects that directly point toward the improved graphene quality are a largely suppressed carbon dimer attachment due to the facile incorporation of this precursor species into the liquid surface and a low-barrier ring-opening process that self-heals 5-membered rings resulting from remaining dimer attachments.

cond-mat.mtrl-sci↗

arXiv2023

Mesoscopic modeling and experimental validation of thermal and mechanical properties of polypropylene nanocomposites reinforced by graphene-based fillers

The development of nanocomposites relies on structure-property relations, which necessitate multiscale modeling approaches. This study presents a modelling framework that exploits mesoscopic models to predict the thermal and mechanical properties of nanocomposites starting from their molecular structure. In detail, mesoscopic models of polypropylene (PP) and graphene based nanofillers (Graphene (Gr), Graphene Oxide (GO), and reduced Graphene Oxide (rGO)) are considered. The newly developed mesoscopic model for the PP/Gr nanocomposite provides mechanistic information on the thermal and mechanical properties at the filler-matrix interface, which can be then exploited to enhance the prediction accuracy of traditional continuum simulations by calibrating the thermal and mechanical properties of the filler-matrix interface. Once validated through a dedicated experimental campaign, this multiscale model demonstrates that with the modest addition of nanofillers (up to 2 wt.%), the Young's modulus and thermal conductivity show up to 35% and 25% enhancement, respectively, while the Poisson's ratio slightly decreases. Among the different combinations tested, PP/Gr nanocomposite shows the best mechanical properties, whereas PP/rGO demonstrates the best thermal conductivity. This validated mesoscopic model can contribute to the development of smart materials with enhanced mechanical and thermal properties based on polypropylene, especially for mechanical, energy storage, and sensing applications.

cond-mat.mtrl-sci↗

arXiv2022

Chemical Vapour Deposition Graphene-PMMA Nanolaminates for Flexible Gas Barrier

Successful ways of fully exploiting the excellent structural and multifunctional performance of graphene and related materials are of great scientific and technological interest. New opportunities are provided by the fabrication of a novel class of nanocomposites with a nanolaminate architecture. In this work, by using the iterative lift-off/float-on process combined with wet depositions, we incorporated cm-size graphene monolayers produced via Chemical Vapour Deposition into a poly (methyl methacrylate) (PMMA) matrix with a controlled, alternate-layered structure. The produced nanolaminate shows a significant improvement in mechanical properties, with enhanced stiffness, strength and toughness, with the addition of only 0.06 vol% of graphene. Furthermore, oxygen and carbon dioxide permeability measurements performed at different relative humidity levels, reveal that the addition of graphene leads to significant reduction of permeability, compared to neat PMMA. Overall, we demonstrate that the produced graphene-PMMA nanolaminate surpasses, in terms of gas barrier properties, the traditional discontinuous graphene-particle composites with a similar filler content. Moreover, we found that the gas permeability through the nanocomposites departs from a monotonic decrease as a function of relative humidity, which is instead evident in the case of the pure PMMA nanolaminate. This work suggests the possible use of Chemical Vapour Deposition graphene-polymer nanolaminates as a flexible gas barrier, thus enlarging the spectrum of applications for this novel material.

physics.app-ph↗

arXiv2021

Multi-functional 2D hybrid aerogels for gas absorption applications

Aerogels have attracted significant attention recently due to their ultra-light weight porous structure, mechanical robustness, high electrical conductivity, facile scalability and their use as gas and oil absorbers. Herein, we examine the multi-functional properties of hybrid aerogels consisting of reduced graphene oxide (rGO) integrated with hexagonal boron nitride (hBN) platelets. Using a freeze-drying approach, hybrid aerogels are fabricated by simple mixing with various volume fractions of hBN and rGO up to 0.5/0.5 ratio. The fabrication method is simple, cost effective, scalable and can be extended to other 2D materials combinations. The hybrid rGO/hBN aerogels (HAs) are mechanically robust and highly compressible with mechanical properties similar to those of the pure rGO aerogel. We show that the presence of hBN in the HAs enhances the gas absorption capacities of formaldehyde and water vapour up to ~7 and > 8 times, respectively, as compared to pure rGO aerogel. Moreover, the samples show good recoverability, making them highly efficient materials for gas absorption applications and for the protection of artefacts such as paintings in storage facilities. Finally, even in the presence of large quantity of insulating hBN, the HAs are electrically conductive, extending the potential application spectrum of the proposed hybrids to the field of electro-thermal actuators. The work proposed here paves the way for the design and production of novel 2D materials combinations with tailored multi-functionalities suited for a large variety of modern applications.

physics.app-ph↗

arXiv2021

Determination of the elastic moduli of CVD graphene by probing graphene/polymer Bragg stacks

Graphene has been widely used in the form of micro-flakes to fabricate composite materials with enhanced mechanical properties. Due to the small size of the inclusions and their random orientation within the matrix, the superior mechanical properties of graphene cannot be fully exploited. Recently, attempts have been made to fabricate nanolaminate composites by interleaving large sheets of chemical vapor deposition (CVD) monolayer graphene between thin layers of polymer matrices. However, CVD graphene is inevitably accompanied by wrinkles that are formed in the synthesis process, and it remains unknown how the wrinkles affect the mechanical properties of graphene. Here, we employ Brillouin Light Spectroscopy (BLS) to study the elastic moduli of CVD graphene by probing graphene/poly(methylmethacrylate) hybrid Bragg stacks at zero strain. We find the Young's and shear moduli of the CVD graphene, which has wrinkles in the form of sharp elevations of height of about 6 nm and a FWHM of ca. 30 nm, to be 680 and 290 GPa, respectively, with the former being about 30% lower than that of exfoliated, flat graphene. This work sheds light on the elastic properties of CVD graphene and provides a method that can be extended to studying the wrinkle-induced softening effect in other two-dimensional materials.

cond-mat.mtrl-sci↗

arXiv2021

Thermoplastic polyurethane-graphene nanoplatelets microcellular foams for electromagnetic interference shielding

The incorporation of graphene-related materials as nanofiller can produce multifunctional foams with enhanced specific properties and density reduction. Herein we report on the preparation of microcellular thermoplastic polyurethane/graphene foams by batch foaming. Solution blending was first adopted to disperse graphene nanoplatelets (GNP) in the elastomeric matrix. Then, a foaming process based on the use of supercritical CO2 was adopted to produce the microcellular TPU/GNP composite foams with graphene content up to 1 wt%. The EMI shielding behaviour of the TPU/GNP foams has been assessed in the THz range, and has revealed their potential in comparison with other graphene-filled foams presented in the literature, that exhibit similar specific shielding effectiveness but at much higher content of graphene-related materials (10-30 wt%).

physics.app-ph↗

arXiv2021

Wettability of graphene by molten polymers

Graphene wetting by polymers is a critical issue to both the success of polymer-aided transfer of large size sheets onto specific substrates and to the development of well performing nanocomposites. Here we show for the first time that high temperature contact angle measurements can be performed to investigate the wettability of CVD graphene by molten polymers. In particular, poly(methyl methacrylate), a widely used polymer support for CVD graphene transfer, has been adopted herein for this proof-of-concept study and the values of contact angle and work of adhesion have been provided in the temperature range 170-200 °C.

physics.app-ph↗

arXiv2021

Effective EMI shielding behaviour of thin graphene/PMMA nanolaminates in the THz range

The use of graphene in a form of discontinuous flakes in polymer composites limits the full exploitation of the unique properties of graphene, thus requiring high filler loadings for achieving - for example - satisfactory electrical and mechanical properties. Herein centimetre-scale CVD graphene/polymer nanolaminates have been produced by using an iterative 'lift-off/float-on' process and have been found to outperform, for the same graphene content, state-of-the-art flake-based graphene polymer composites in terms of mechanical reinforcement and electrical properties. Most importantly these thin laminate materials show a high electromagnetic interference (EMI) shielding effectiveness, reaching 60 dB for a small thickness of 33 micron, and an absolute EMI shielding effectiveness close to 3* 10 ^5 dB cm ^2 g^-1 which is amongst the highest values for synthetic, non-metallic materials produced to date.

physics.app-ph↗

arXiv2020

Tunable macroscale structural superlubricity in two-layer graphene via strain engineering

Achieving structural superlubricity in graphitic samples of macro-scale size is particularly challenging due to difficulties in sliding large contact areas of commensurate stacking domains. Here, we show the presence of macro-scale structural superlubricity between two randomly stacked graphene layers produced by both mechanical exfoliation and CVD. By measuring the shifts of Raman peaks under strain we estimate the values of frictional interlayer shear stress (ILSS) in the superlubricity regime (mm scale) under ambient conditions. The random incommensurate stacking, the presence of wrinkles and the mismatch in the lattice constant between two graphene layers induced by the tensile strain differential are considered responsible for the facile shearing at the macroscale. Furthermore, molecular dynamic simulations show that the stick-slip behaviour does not hold for achiral shearing directions for which the ILSS decreases substantially, supporting the experimental observations. Our results pave the way for overcoming several limitations in achieving macroscale superlubricity in graphene.

cond-mat.mtrl-sci↗

arXiv2020

Enhancing the Adhesion of Graphene to Polymer Substrates by Controlled Defect Formation

The mechanical integrity of composite materials depends primarily on the interface strength and the defect density of the reinforcement which is the provider of enhanced strength and stiffness. In the case of graphene/ polymer nanocomposites which are characterized by an extremely large interface region, any defects in the inclusion (such as folds, cracks, holes etc.) will have a detrimental effect to the internal strain distribution and the resulting mechanical performance. This conventional wisdom, however, can be challenged if the defect size is reduced beyond the critical size for crack formation to the level of atomic vacancies. In that case, there should be no practical effect on crack propagation and depending on the nature of the vacancies the interface strength may be in fact increase. In this work we employed argon ion (Ar+) bombardment and subsequent exposure to hydrogen (H2) to induce (as revealed by X-ray & Ultraviolet photoelectron spectroscopy (XPS/UPS) and Raman spectroscopy) passivated atomic single vacancies to CVD graphene. The modified graphene was subsequently transferred to PMMA bars and the morphology, wettability and the interface adhesion of the CVD graphene/PMMA system were investigated with Atomic Force Microscopy technique and Raman analysis. The results obtained showed clearly an overall improved mechanical behavior of graphene/polymer interface, since an increase as well a more uniform shift distribution with strain is observed. This paves the way for interface engineering in graphene/polymer systems which, in pristine condition, suffer from premature graphene slippage and subsequent failure.

cond-mat.mtrl-sci↗

arXiv2019

Production and mechanical characterization of graphene micro-ribbons

Patterning of graphene into micro- and nano-ribbons allows for the tunability in emerging fields such as flexible electronic and optoelectronic devices, and is gaining interest for the production of more efficient reinforcement for composite materials. In this work we fabricate micro-ribbons from CVD graphene by combining UV photolithography and dry etching oxygen plasma treatments. Raman spectral imaging confirms the effectiveness of the patterning procedure, which is suitable for large-area patterning of graphene on wafer-scale, and confirms that the quality of graphene remains unaltered. The produced micro-ribbons were finally transferred and embedded into a polymeric matrix and the mechanical response was investigated by in-situ mechanical investigation combining Raman spectroscopy and tensile/compressive tests.

cond-mat.mtrl-sci↗

arXiv2019

Mosaic pattern formation in exfoliated graphene by mechanical deformation

Graphene is susceptible to morphological instabilities such as wrinkles and folds, which result from the imposition of thermo-mechanical stresses upon cooling from high temperatures and/ or under biaxial loading. A particular pattern encountered in CVD graphene is that of mosaic formation. Although it is understood that this pattern results from the severe biaxial compression upon cooling from high temperatures, it has not been possible to create such a complex pattern at room temperature by mechanical loading. Herein, we have managed by means of lateral wrinkling induced by tension and Euler buckling resulting from uniaxial compression upon unloading, to create such patterns in exfoliated graphene. We also show that these patterns can be used as channels for trapping or administering fluids at interstitial space between graphene and its support. This opens a whole dearth of new applications in the area of nano-fluidics but also in photo-electronics and sensor technologies.

cond-mat.mtrl-sci↗

arXiv2019

Non-Eulerian behavior of graphitic materials under compression

The mechanical behavior of graphitic materials is greatly affected by the weak interlayer bonding with van der Waals forces for a range of thickness from nano to macroscale. Herein, we present a comprehensive study of the effect of layer thickness on the compression behavior of graphitic materials such as graphene which are fully embedded in polymer matrices. Raman Spectroscopy was employed to identify experimentally the critical strain to failure of the graphitic specimens. The most striking finding is that, contrary to what would be expected from Eulerian mechanics, the critical compressive strain to failure decreases with increase of flake thickness. This is due to the layered structure of the material and in particular the weak cohesive forces that hold the layers together. The plate phenomenology breaks down for the case of multi-layer graphene, which can be approached as discrete single layers weakly bonded to each other. This behavior is modelled here by considering the interlayer bonding (van der Waals forces) as springs in series, and very good agreement was found between theory and experiment. Finally, it will be shown that in the post failure regime multi-layer graphenes exhibit negative stiffness and thus behave as mechanical metamaterials.

cond-mat.mtrl-sci↗

arXiv2018

Effect of the reduction process on the field emission performance of reduced graphene oxide cathodes

The electron field emission (FE) properties of reduced graphene oxide (rGO) cathodes produced by three different reduction methods were assessed and compared. In particular, chemical reduction techniques, using either NaOH or KOH as reducing agents, were compared with thermal reduction (TR) methods. Xray photoelectron spectroscopy (XPS) measurements revealed that different reduction techniques led to different GO lattice parameters. Furthermore, the work function measured with ultraviolet photoelectron spectroscopy (UPS) varied among the samples giving rise to different electron emission characteristics. In particular, the cathodes prepared by the TR method presented the best FE performance, showing a turnon field of as low as ca. 1.8 V mm^-1 and a field enhancement factor of ca. 1300, which was very close however to that shown by the NaOH-reduced sheets. The worst FE properties were exhibited by the KOH-reduced nanosheets. In light of the above results, the role of the different reduction techniques as well as the final rGO lattice characteristics with regards to the emission performance are evaluated and discussed.

cond-mat.mtrl-sci↗

arXiv2018

Compression behavior of simply-supported and fully embedded monolayer graphene: theory and experiment

Single layer graphene simply-supported on a polymer substrate was subjected to axial compression and its behavior upon loading was monitored with laser Raman spectroscopy (LRS). The graphene was found to fail by wrinkling (buckling) at a critical strain of -0.30% and at a compressive stress of ~1.6 GPa, as revealed by the conversion of the spectroscopic data to actual stress-strain curves. This contrasts with the value of -0.60% and stress of ~3.8 GPa required for failure initiation in the fully embedded case. To elucidate the failure mechanisms in the two cases examined, molecular dynamics simulations employing the AIREBO potential were performed. We assess the impact of surface roughness, graphene-polymer interaction, and of thermal (phonon) ripples on the onset of wrinkle formation. Overall good agreement was found between theory and experiment. As argued herein, the understanding and control of out-of-plane phenomena upon mechanical loading of graphene are important prerequisites for the design and function of new graphene-based devices.

cond-mat.mtrl-sci↗

arXiv2018

Optical detection of strain and doping inhomogenieties in single layer MoS2

Van der Waals single-layer materials are characterized by an inherent extremely low bending rigidity and therefore are prone to nanoscale structural modifications due to substrate interactions. Such interactions can induce excess charge concentration, conformational ripples and residual mechanical strain. In this work, we employed spatially resolved Raman and Photoluminescence images to investigate strain and doping inhomogeneities in a single layer exfoliated Molybdenum disulphide crystal. We have found that correlations between the spectral parameters of the most prominent Raman bands A1' and E' enable us to decouple and quantify strain and charge doping effects. In comparison with AFM topography, we show that the spatial distribution of the linewidth of the A-exciton peak is strain sensitive and can capture features smaller than the laser spot size. The presented optical analysis may have implications in the development of high-quality devices based on two-dimensional materials since structural and electronic modifications affect considerably their carrier mobility and conductivity.

cond-mat.mtrl-sci↗

arXiv2018

Stress and charge transfer in uniaxially strained CVD graphene

Mechanical properties of graphene prepared by chemical vapor deposition (CVD) are not easily comparable to the properties of nearly perfect graphene prepared by mechanical cleavage. In this work, we attempt to investigate the mechanical performance of CVD graphene (simply supported or embedded in polymer matrix), transferred by two different techniques, under uniaxial loading with simultaneous in-situ monitoring by Raman microspectroscopy. The level of charge transfer doping and strain is assessed using the vector analysis modified for uniaxial strain. The strain distribution across the samples varies significantly, owing to the growth and transfer process, which induces wrinkles and faults in the CVD graphene. In simply supported specimens, the stress transfer efficiency is generally very low and the changes in Raman spectra are dominated by variations in the charge transfer originating from the realignment of the domains on the substrate upon the application of strain. In contrast, samples covered with an additional polymer layer exhibit an improved stress transfer efficiency, and the alterations of charge doping levels are negligible. In fully embedded specimens, the variations in stress transfer efficiencies are caused by the size of the effective graphene domains defined by cracks, folds and or/wrinkles.

cond-mat.mtrl-sci↗