arXiv subjects

Craig E. DeForest

Publications and source records attributed to Craig E. DeForest.

At least 19 recordsLinked to original sources

arXiv2026

The Wide Field Imager (WFI) Instruments for the Polarimeter to Unify the Corona and Helliosphere (PUNCH)

We describe the design, hardware integration, and calibration performance of the Wide-Field Imager (WFI) instruments for the Polarimeter to Unify the Corona and Heliosphere (PUNCH) mission. The WFI instruments are a trio of visible-light heliospheric imagers that, together, view the outer corona and solar wind from under 3.5° to over 47° from the Sun, via sunlight that is Thomson-scattered from free electrons. In flight, the WFIs are arranged so that their collective fields of view form an approximately symmetric trefoil on the sky, comprising three circular-truncated square fields spaced 120° apart in position angle. The WFIs work with the NFI instrument, described elsewhere, to implement the full PUNCH field spanning all solar position angles, at elongations from 1.5° to 47° from disk center. WFI is implemented using dioptric (lens) optics and deep multi-stage baffles that attenuate solar, planetary, and lunar stray light sufficiently for ground processing to reveal the faint signal for the primary science. WFI measures both total brightness (tB) and polarized brightness (pB), via an on-board polarizing filter wheel (PFW) and charge-coupled device (CCD) camera that share a common design with those of the NFI instrument.

astro-ph.IM↗

arXiv2026

Polarimeter to Unify the Corona and Heliosphere (PUNCH)

The Polarimeter to Unify the Corona and Heliosphere (PUNCH) mission is a NASA Small Explorer to determine the cross-scale processes that unify the solar corona and heliosphere. PUNCH has two science objectives: (1) understand how coronal structures become the ambient solar wind, and (2) understand the dynamic evolution of transient structures, such as coronal mass ejections, in the young solar wind. To address these objectives, PUNCH uses a constellation of four small spacecraft in Sun-synchronous low Earth orbit, to collect linearly polarized images of the K corona and young solar wind. The four spacecraft each carry one visible-light imager in a 1+3 configuration: a single Narrow Field Imager solar coronagraph captures images of the outer corona at all position angles, and at solar elongations from 1.5 degrees (6 R$_\odot$) to 8 degrees (32 R$_\odot$); and three separate Wide Field Imager heliospheric imagers together capture views of the entire inner solar system, at solar elongations from 3 degrees (12 R$_\odot$) to 45 degrees (180 R$_\odot$) from the Sun. PUNCH images include linear-polarization data, to enable inferring the three-dimensional structure of visible features without stereoscopy. The instruments are matched in wavelength passband, support overlapping instantaneous fields of view, and are operated synchronously, to act as a single ``virtual instrument'' with a 90 degree wide field of view, centered on the Sun. PUNCH launched in March of 2025 and began science operations in June of 2025. PUNCH has an open data policy with no proprietary period, and PUNCH Science Team Meetings are open to all.

astro-ph.SR↗

arXiv2026

Polarization Diagnostics Applied to Coronal Mass Ejections and the Background Solar Wind

The ratio of radially to tangentially polarized Thomson-scattered white light provides a powerful tool for locating the 3D position of compact structures in the solar corona and inner heliosphere, and the Polarimeter to Unify the Corona and Heliosphere (PUNCH) has been designed to take full advantage of this diagnostic capability. Interestingly, this same observable that establishes the position of transient blob-like structures becomes a local measure of the slope of the global falloff of density in the background solar wind. It is thus important to characterize the extent along the line of sight of structures being studied, in order to determine whether they are sufficiently compact for 3D positioning. In this paper, we build from analyses of individual lines of sight to three-dimensional models of coronal mass ejections (CMEs), allowing us to consider how accurately polarization properties of the transient and quiescent solar wind are diagnosed. In this way, we demonstrate the challenges and opportunities presented by PUNCH polarization data for various quantitative diagnostics.

astro-ph.SR↗

arXiv2025

Citizen CATE 2024: Extending Totality During the 8 April 2024 Total Solar Eclipse with a Distributed Network of Community Participants

The Citizen CATE 2024 next-generation experiment placed 43 identical telescope and camera setups along the path of totality during the total solar eclipse (TSE) on 8 April 2024 to capture a 60-minute movie of the inner and middle solar corona in polarized visible light. The 2024 TSE path covered a large geographic swath of North America and we recruited and trained 36 teams of community participants ("citizen scientists") representative of the various communities along the path of totality. Afterwards, these teams retained the equipment in their communities for ongoing education and public engagement activities. Participants ranged from students (K12, undergraduate, and graduate), educators, and adult learners to amateur and professional astronomers. In addition to equipment for their communities, CATE 2024 teams received hands-on telescope training, educational and learning materials, and instruction on data analysis techniques. CATE 2024 used high-cadence, high-dynamic-range (HDR) polarimetric observations of the solar corona to characterize the physical processes that shape its heating, structure, and evolution at scales and sensitivities that cannot be studied outside of a TSE. Conventional eclipse observations do not span sufficient time to capture changing coronal topology, but the extended observation from CATE 2024 does. Analysis of the fully calibrated dataset will provide deeper insight and understanding into these critical physical processes. We present an overview of the CATE 2024 project, including how we engaged local communities along the path of totality, and the first look at CATE 2024 data products from the 2024 TSE.

astro-ph.SR↗

arXiv2025

Tracking the Activity of the Interstellar Object 3I/ATLAS through its Perihelion

In order to facilitate interplanetary spacecraft observationsof 3I/ATLAS, we have monitored and predicted the optical properties of its coma using both ground and space-based observations. Here, we describe how the data from space-based solar coronagraphs and the PUNCH mission enabled tracking of 3I/ATLAS's optical magnitude throughout its entire perihelion passage, including the period between October 8 and 30, 2025, when it was not visible from Earth.

astro-ph.EP↗

arXiv2024

A Simplified Theory of External Occulters for Solar Coronagraphs

We present a first-principles analytic treatment of modern multi-vane occulters in circular (coronagraph) and linear (heliospheric imager) geometry, develop a simplified theory that is useful for designing and predicting their performance, explain certain visual artifacts, and explore the performance limits of multi-vane occulters. Multi-vane occulters are challenging to design in part because they violate the conditions for both the Fraunhofer and Fresnel approximations to diffraction theory, and new designs have therefore generally required explicit simulation, empirical measurement, "guesstimation", or all three. Starting from the Kirchoff diffraction integral, we develop a "sequential plane wave" approximate analytic theory that is suitable for predicting performance of multi-vane occulters, and use it to derive closed-form expressions for the performance of new designs. We review the fundamental 2-D system of an occulter edge, discuss how it applies to real 3-D systems by extrusion or revolution, present the reason for observed bright quasi-achromatic fringing around coronagraph occulters, develop the sequential plane wave approximation in 2-D and explore its limits, describe the relevance of the 2-D theory to practical 3-D instruments, and discuss implications for multi-vane occulter design in current and future instruments.

astro-ph.IM↗

arXiv2024

Forecasting Shock-associated Energetic Particle Intensities in the Inner Heliosphere: A Proof-of-Concept Capability for the PUNCH Mission

Solar energetic particles (SEPs) associated with shocks driven by fast coronal mass ejections (CMEs) or shocks developed by corotating interaction regions (CIRs) often extend to high energies, and are thus key elements of space weather. The PUNCH mission, set to be launched in 2025, is equipped with photometric that enables 3D tracking of solar wind structures in the interplanetary space through polarized light. Tracking techniques are used to estimate speeds and speed gradients of solar structures, including speed jumps at fast shocks. We report on a strong and a robust relation between the shock speed jump magnitude at CME and CIR shocks and the peak fluxes of associated energetic particles from the analysis of 59 CME-driven shocks and 74 CIRs observed by Wind/STEP between 1997-2023. We demonstrate that this relation, along with PUNCH anticipated observations of solar structures can be used to forecast shock-associated particle events close to the Sun; thus, advancing and providing a crucial input to forecasting of SEP fluxes in the heliosphere.

astro-ph.SR↗

arXiv2024

SynCOM: An Empirical Model for High-Resolution Simulations of Transient Solar Wind Flows

The Synthetic Corona Outflow Model (SynCOM), an empirical model, simulates the solar corona's dynamics to match high-resolution observations, providing a useful resource for testing velocity measurement algorithms. SynCOM generates synthetic images depicting radial variability in polarized brightness and includes stochastic elements for plasma outflows and instrumental noise. It employs a predefined flow velocity probability distribution and an adjustable signal-to-noise ratio to evaluate different data analysis methods for coronal flows. By adjusting parameters to match specific coronal and instrumental conditions, SynCOM offers a platform to assess these methods for determining coronal velocity and acceleration. Validating these measurements would help to understand solar wind origins and support missions such as the Polarimeter to Unify the Corona and Heliosphere (PUNCH). In this study, we demonstrate how SynCOM can be employed to assess the precision and performance of two different flow tracking methods. By providing a ground-truth based on observational data, we highlight the importance of SynCOM in confirming observational standards for detecting coronal flows.

astro-ph.SR↗

arXiv2024

CATEcor: an Open Science, Shaded-Truss, Externally-Occulted Coronagraph

We present the design of a portable coronagraph, CATEcor, that incorporates a novel "shaded truss" style of external occultation and serves as a proof-of-concept for that family of coronagraphs. The shaded truss design style has the potential for broad application in various scientific settings. We conceived CATEcor itself as a simple instrument to observe the corona during the darker skies available during a partial solar eclipse, or for students or interested amateurs to detect the corona under ideal non-eclipsed conditions. CATEcor is therefore optimized for simplicity and accessibility to the public. It is implemented using an existing dioptric telescope and an adapter rig that mounts in front of the objective lens, restricting the telescope aperture and providing external occultation. The adapter rig, including occulter, is fabricated using fusion deposition modeling (FDM; colloquially "3D printing"), greatly reducing cost. The structure is designed to be integrated with moderate care and may be replicated in a university or amateur setting. While CATEcor is a simple demonstration unit, the design concept, process, and trades are useful for other more sophisticated coronagraphs in the same general family, which might operate under normal daytime skies outside the annular-eclipse conditions used for CATEcor.

astro-ph.IM↗

arXiv2024

Observations of the Polarized Solar Corona during the Annular Eclipse of October 14, 2023

We present results of a dual eclipse expedition to observe the solar corona from two sites during the annular solar eclipse of 2023 October 14, using a novel coronagraph designed to be accessible for amateurs and students to build and deploy. The coronagraph "CATEcor" builds on the standardized eclipse observing equipment developed for the Citizen CATE 2024 experiment. The observing sites were selected for likelihood of clear observations, for historic relevance (near the Climax site in the Colorado Rocky Mountains), and for centrality to the annular eclipse path (atop Sandia Peak above Albuquerque, New Mexico). The novel portion of CATEcor is an external occulter assembly that slips over the front of a conventional dioptric telescope, forming a "shaded-truss" externally occulted coronagraph. CATEcor is specifically designed to be easily constructed in a garage or "makerspace" environment. We successfully observed some bright features in the solar corona to an altitude of approximately 2.25 R$_\odot$ during the annular phases of the eclipse. Future improvements to the design, in progress now, will reduce both stray light and image artifacts; our objective is to develop a design that can be operated successfully by amateur astronomers at sufficient altitude even without the darkened skies of a partial or annular eclipse.

astro-ph.SR↗

arXiv2023

A Chromatic Treatment of Linear Polarization in the Solar Corona at the 2023 Total Solar Eclipse

The broadband solar K-corona is linearly polarized due to Thomson scattering. Various strategies have been used to represent coronal polarization. Here, we present a new way to visualize the polarized corona, using observations from the 2023 April 20 total solar eclipse in Australia in support of the Citizen CATE 2024 project. We convert observations in the common four-polarizer orthogonal basis (0°, 45°, 90°, & 135°) to -60°, 0°, and +60° (MZP) polarization, which is homologous to R, G, B color channels. The unique image generated provides some sense of how humans might visualize polarization if we could perceive it in the same way we perceive color.

physics.pop-ph↗

arXiv2023

The Sun's Alfven Surface: Recent Insights and Prospects for the Polarimeter to Unify the Corona and Heliosphere (PUNCH)

The solar wind is the extension of the Sun's hot and ionized corona, and it exists in a state of continuous expansion into interplanetary space. The radial distance at which the wind's outflow speed exceeds the phase speed of Alfvenic and fast-mode magnetohydrodynamic (MHD) waves is called the Alfven radius. In one-dimensional models, this is a singular point beyond which most fluctuations in the plasma and magnetic field cannot propagate back down to the Sun. In the multi-dimensional solar wind, this point can occur at different distances along an irregularly shaped "Alfven surface." In this article, we review the properties of this surface and discuss its importance in models of solar-wind acceleration, angular-momentum transport, MHD waves and turbulence, and the geometry of magnetically closed coronal loops. We also review the results of simulations and data analysis techniques that aim to determine the location of the Alfven surface. Combined with recent perihelia of Parker Solar Probe, these studies seem to indicate that the Alfven surface spends most of its time at heliocentric distances between about 10 and 20 solar radii. It is becoming apparent that this region of the heliosphere is sufficiently turbulent that there often exist multiple (stochastic and time-dependent) crossings of the Alfven surface along any radial ray. Thus, in many contexts, it is more useful to make use of the concept of a topologically complex "Alfven zone" rather than one closed surface. This article also reviews how the Polarimeter to Unify the Corona and Heliosphere (PUNCH) mission will measure the properties of the Alfven surface and provide key constraints on theories of solar-wind acceleration.

astro-ph.SR↗

arXiv2021

Three-Polarizer Treatment of Linear Polarization in Coronagraphs and Heliospheric Imagers

Linear polarized light has been used to view the solar corona for over 150 years. While the familiar Stokes representation for polarimetry is complete, it is best matched to a laboratory setting and therefore is not the most convenient representation either for coronal instrument design or for coronal data analysis. Over the last 100 years of development of coronagraphs and heliospheric imagers, various representations have been used both for direct measurement and analysis. These systems include famous representations such as the (B, pB) system that is analogous to the Stokes system in solar observing coordinates, and also internal representations such as in-instrument Stokes parameters with fixed or variable "vertical" direction, and brightness values through a particular polarizing optic or set thereof. Many polarimetric instruments currently use a symmetric three-polarizer measurement and representation system, which we refer to as "(M, Z, P)", to derive the (B, pB) or Stokes parameters. We present a symmetric derivation of (B, pB) and Stokes parameters from (M, Z, P), analyze the noise properties of (M, Z, P) in the context of instrument design, develop (M, Z, P) as a useful intermediate system for data analysis including background subtraction, and draw a helpful analogy between linear polarimetric systems and the large existing body of work on photometric colorimetry.

astro-ph.IM↗

arXiv2021

Inward Propagating Plasma Parcels in the Solar Corona: Models with Aerodynamic Drag, Ablation, and Snowplow Accretion

Although the solar wind flows primarily outward from the Sun to interplanetary space, there are times when small-scale plasma inflows are observed. Inward-propagating density fluctuations in polar coronal holes were detected by the COR2 coronagraph on board the STEREO-A spacecraft at heliocentric distances of 7 to 12 solar radii, and these fluctuations appear to undergo substantial deceleration as they move closer to the Sun. Models of linear magnetohydrodynamic waves have not been able to explain these deceleration patterns, so they have been interpreted more recently as jets from coronal sites of magnetic reconnection. In this paper, we develop a range of dynamical models of discrete plasma parcels with the goal of better understanding the observed deceleration trend. We found that parcels with a constant mass do not behave like the observed flows, and neither do parcels undergoing ablative mass loss. However, parcels that accrete mass in a snowplow-like fashion can become decelerated as observed. We also extrapolated OMNI in situ data down to the so-called Alfven surface and found that the initial launch-point for the observed parcels may often be above this critical radius. In other words, in order for the parcels to flow back down to the Sun, their initial speeds are probably somewhat nonlinear (i.e., supra-Alfvenic) and thus the parcels may be associated with structures such as shocks, jets, or shear instabilities.

astro-ph.SR↗

arXiv2020

Cross Sections of Coronal Loop Flux Tubes

Coronal loops reveal crucial information about the nature of both coronal magnetic fields and coronal heating. The shape of the corresponding flux tube cross section and how it varies with position are especially important properties. They are a direct indication of the expansion of the field and of the cross-field spatial distribution of the heating. We have studied 20 loops using high spatial resolution observations from the first flight of the Hi-C rocket experiment, measuring the intensity and width as a function of position along the loop axis. We find that intensity and width tend to either be uncorrelated or to have a direct dependence, such that they increase or decrease together. This implies that the flux tube cross sections are approximately circular under the assumptions that the tubes have non-negligible twist and that the plasma emissivity is approximately uniform along the magnetic field. The shape need not be a perfect circle and the emissivity need not be uniform within the cross section, but sub-resolution patches of emission must be distributed quasi-uniformly within an envelope that has an aspect ratio of order unity. This raises questions about the suggestion that flux tubes expand with height, but primarily in the line-of-sight direction so that the corresponding (relatively noticeable) loops appear to have roughly uniform width, a long-standing puzzle. It also casts doubt on the idea that most loops correspond to simple warped sheets, although we leave open the possibility of more complex manifold structures.

astro-ph.SR↗

arXiv2020

A new facility for airborne solar astronomy: NASA's WB-57 at the 2017 total solar eclipse

NASA's WB-57 High Altitude Research Program provides a deployable, mobile, stratospheric platform for scientific research. Airborne platforms are of particular value for making coronal observations during total solar eclipses because of their ability both to follow the Moon's shadow and to get above most of the atmospheric airmass that can interfere with astronomical observations. We used the 2017 Aug 21 eclipse as a pathfinding mission for high-altitude airborne solar astronomy, using the existing high-speed visible-light and near-/mid-wave infrared imaging suite mounted in the WB-57 nose cone. In this paper, we describe the aircraft, the instrument, and the 2017 mission; operations and data acquisition; and preliminary analysis of data quality from the existing instrument suite. We describe benefits and technical limitations of this platform for solar and other astronomical observations. We present a preliminary analysis of the visible-light data quality and discuss the limiting factors that must be overcome with future instrumentation. We conclude with a discussion of lessons learned from this pathfinding mission and prospects for future research at upcoming eclipses, as well as an evaluation of the capabilities of the WB-57 platform for future solar astronomy and general astronomical observation.

astro-ph.IM↗

arXiv2019

Multiwavelength Study of Equatorial Coronal-Hole Jets

Jets (transient/collimated plasma ejections) occur frequently throughout the solar corona and contribute mass/energy to the corona and solar wind. By combining numerical simulations and high-resolution observations, we have made substantial progress recently on determining the energy buildup and release processes in these jets. Here we describe a study of 27 equatorial coronal-hole jets using Solar Dynamics Observatory/AIA and HMI observations on 2013 June 27-28 and 2014 January 8-10. Out of 27 jets, 18 (67%) are associated with mini-filament ejections; the other 9 (33%) do not show mini-filament eruptions but do exhibit mini-flare arcades and other eruptive signatures. This indicates that every jet in our sample involved a filament-channel eruption. From the complete set of events, 6 jets (22%) are apparently associated with tiny flux-cancellation events at the polarity inversion line, and 2 jets (7%) are associated with sympathetic eruptions of filaments from neighboring bright points. Potential-field extrapolations of the source-region photospheric magnetic fields reveal that all jets originated in the fan-spine topology of an embedded bipole associated with an extreme ultraviolet coronal bright point. Hence, all our jets are in agreement with the breakout model of solar eruptions. We present selected examples and discuss the implications for the jet energy build-up and initiation mechanisms.

astro-ph.SR↗

arXiv2018

Evidence For The Magnetic Breakout Model in an Equatorial Coronal-Hole Jet

Small, impulsive jets commonly occur throughout the solar corona, but are especially visible in coronal holes. Evidence is mounting that jets are part of a continuum of eruptions that extends to much larger coronal mass ejections and eruptive flares. Because coronal-hole jets originate in relatively simple magnetic structures, they offer an ideal testbed for theories of energy buildup and release in the full range of solar eruptions. We analyzed an equatorial coronal-hole jet observed by SDO/AIA on 09 January 2014, in which the magnetic-field structure was consistent with the embedded-bipole topology that we identified and modeled previously as an origin of coronal jets. In addition, this event contained a mini-filament, which led to important insights into the energy storage and release mechanisms. SDO/HMI magnetograms revealed footpoint motions in the primary minority-polarity region at the eruption site, but show negligible flux emergence or cancellation for at least 16 hours before the eruption. Therefore, the free energy powering this jet probably came from magnetic shear concentrated at the polarity inversion line within the embedded bipole. We find that the observed activity sequence and its interpretation closely match the predictions of the breakout jet model, strongly supporting the hypothesis that the breakout model can explain solar eruptions on a wide range of scales.

astro-ph.SR↗