arXiv subjects

Craig J. Fennie

Publications and source records attributed to Craig J. Fennie.

At least 19 recordsLinked to original sources

arXiv2026

Strain-Induced Relaxor Multiferroicity at Room Temperature in Hexaferrite BaFe12O19 Thin Films

Multiferroic materials that combine magnetic and electric order at room temperature are rare. Here, we demonstrate strain-induced room-temperature polar order in the ferrimagnetic hexaferrite BaFe12O19. First-principles calculations reveal a strain-tunable energy landscape with multiple competing dipolar configurations and predict that compressive strain favors polar distortions. Using an isostructural Sr1.03Ga10.81Mg0.58Zr0.58O19 substrate, we grow coherently strained BaFe12O19 films with 1.1% in-plane biaxial compression. Second-harmonic generation measurements demonstrate inversion-symmetry breaking and establish a strain-stabilized polar phase that persists to at least 1000 K. Multislice electron ptychography directly reveals enhanced off-centering of Fe3+ ions within the trigonal-bipyramidal sites of the strained films and spatially varying local polarization, demonstrating the formation of polar nanoregions. Path-integral Monte Carlo simulations further show that compressive strain suppresses quantum fluctuations and stabilizes these local polar distortions. Together, these results establish strain-engineered BaFe12O19 as a room-temperature relaxor multiferroic, in which robust ferrimagnetism coexists with nanoscale polar order. Our work demonstrates a route for transforming an incipient ferroelectric ferrimagnetic into a polar magnetic material through epitaxial strain.

cond-mat.mtrl-sci↗

arXiv2025

Improper Ferroelectricity at the Monolayer Limit

Ultrathin ferroelectric films with out-of-plane polarization and high Curie temperatures are key to miniaturizing electronic devices. Most ferroelectrics employed in devices are proper ferroelectrics, where spontaneous polarization is the primary order parameter. Unfortunately, the Curie temperature of proper ferroelectrics is drastically reduced as the ferroelectric becomes thin; nearly all proper ferroelectrics need to be thicker than several unit cells. The absence of an ultrathin limit has been predicted, but not verified for improper ferroelectrics. These are ferroelectrics where the polarization emerges secondary to the primary order parameter, such as a structural distortion. Here we report improper ferroelectricity with an undiminished Curie temperature in a 0.75-unit-cell-thick hexagonal LuFeO3 (h-LuFeO3) film grown on a SrCo2Ru4O11 bottom electrode with an atomically engineered monolayer bridging layer. Our results demonstrate the absence of a critical thickness for improper ferroelectricity and provide a methodology for creating ultrathin improper ferroelectrics by stabilizing their primary order parameters.

cond-mat.mtrl-sci↗

arXiv2021

Optimizing accuracy and efficacy in data-driven materials discovery for the solar production of hydrogen

The production of hydrogen fuels, via water splitting, is of practical relevance for meeting global energy needs and mitigating the environmental consequences of fossil-fuel-based transportation. Water photoelectrolysis has been proposed as a viable approach for generating hydrogen, provided that stable and inexpensive photocatalysts with conversion efficiencies over 10% can be discovered, synthesized at scale, and successfully deployed (Pinaud et al., Energy Environ. Sci., 2013, 6, 1983). While a number of first-principles studies have focused on the data-driven discovery of photocatalysts, in the absence of systematic experimental validation, the success rate of these predictions may be limited. We address this problem by developing a screening procedure with co-validation between experiment and theory to expedite the synthesis, characterization, and testing of the computationally predicted, most desirable materials. Starting with 70,150 compounds in the Materials Project database, the proposed protocol yielded 71 candidate photocatalysts, 11 of which were synthesized as single-phase materials. Experiments confirmed hydrogen generation and favorable band alignment for 6 of the 11 compounds, with the most promising ones belonging to the families of alkali and alkaline-earth indates and orthoplumbates. This study shows the accuracy of a nonempirical, Hubbard-corrected density-functional theory method to predict band gaps and band offsets at a fraction of the computational cost of hybrid functionals, and outlines an effective strategy to identify photocatalysts for solar hydrogen generation.

cond-mat.mtrl-sci↗

arXiv2020

Direct Visualization of Trimerized States in 1T'-TaTe$_{2}$

Transition-metal dichalcogenides containing tellurium anions show remarkable charge-lattice modulated structures and prominent interlayer character. Using cryogenic scanning transmission electron microscopy (STEM), we map the atomic-scale structures of the high temperature (HT) and low temperature (LT) modulated phases in 1T'-TaTe$_{2}$. At HT, we directly show in-plane metal distortions which form trimerized clusters and staggered, three-layer stacking. In the LT phase at 93 K, we visualize an additional trimerization of Ta sites and subtle distortions of Te sites by extracting structural information from contrast modulations in plan-view STEM data. Coupled with density functional theory calculations and image simulations, this approach opens the door for atomic-scale visualizations of low temperature phase transitions and complex displacements in a variety of layered systems.

cond-mat.mtrl-sci↗

arXiv2020

Strain-stabilized superconductivity

Superconductivity is among the most fascinating and well-studied quantum states of matter. Despite over 100 years of research, a detailed understanding of how features of the normal-state electronic structure determine superconducting properties has remained elusive. For instance, the ability to deterministically enhance the superconducting transition temperature by design, rather than by serendipity, has been a long sought-after goal in condensed matter physics and materials science, but achieving this objective may require new tools, techniques and approaches. Here, we report the first instance of the transmutation of a normal metal into a superconductor through the application of epitaxial strain. We demonstrate that synthesizing RuO$_{2}$ thin films on (110)-oriented TiO$_{2}$ substrates enhances the density of states near the Fermi level, which stabilizes superconductivity under strain, and suggests that a promising strategy to create new transition-metal superconductors is to apply judiciously chosen anisotropic strains that redistribute carriers within the low-energy manifold of $d$ orbitals.

cond-mat.supr-con↗

arXiv2019

Coupled structural distortions, domains, and control of phase competition in polar SmBaMn$_2$O$_6$

Materials with coupled or competing order parameters display highly tunable ground states, where subtle perturbations reveal distinct electronic and magnetic phases. These phases generally are underpinned by complex crystal structures, but the role of structural complexity in these phases often is unclear. We use group theoretic methods and first-principles calculations to analyze a set of coupled structural distortions that underlie the polar charge- and orbitally- ordered antiferromagnetic ground state of $A$-site ordered SmBaMn$_2$O$_6$. We show that these distortions play a key role in establishing the ground state and stabilizing a network of domain wall vortices. Furthermore, we show that the crystal structure provides a knob to control competing electronic and magnetic phases at structural domain walls and in epitaxially strained thin films. These results provide new understanding of the complex physics realized across multiple length scales in SmBaMn$_2$O$_6$ and demonstrate a framework for systematic exploration of correlated and structurally complex materials.

cond-mat.str-el↗

arXiv2019

Pressure-controlled interlayer magnetism in atomically thin CrI3

Stacking order can significantly influence the physical properties of two-dimensional (2D) van der Waals materials. The recent isolation of atomically thin magnetic materials opens the door for control and design of magnetism via stacking order. Here we apply hydrostatic pressure up to 2 GPa to modify the stacking order in a prototype van der Waals magnetic insulator CrI3. We observe an irreversible interlayer antiferromagnetic (AF) to ferromagnetic (FM) transition in atomically thin CrI3 by magnetic circular dichroism and electron tunneling measurements. The effect is accompanied by a monoclinic to a rhombohedral stacking order change characterized by polarized Raman spectroscopy. Before the structural change, the interlayer AF coupling energy can be tuned up by nearly 100% by pressure. Our experiment reveals interlayer FM coupling, which is the established ground state in bulk CrI3, but never observed in native exfoliated thin films. The observed correlation between the magnetic ground state and the stacking order is in good agreement with first principles calculations and suggests a route towards nanoscale magnetic textures by moiré engineering.

cond-mat.mes-hall↗

arXiv2019

Current-Induced Torques with Dresselhaus Symmetry Due to Resistance Anisotropy in 2D Materials

We report measurements of current-induced torques in heterostructures of Permalloy (Py) with TaTe$_2$, a transition-metal dichalcogenide (TMD) material possessing low crystal symmetry, and observe a torque component with Dresselhaus symmetry. We suggest that the dominant mechanism for this Dresselhaus component is not a spin-orbit torque, but rather the Oersted field arising from a component of current that flows perpendicular to the applied voltage due to resistance anisotropy within the TaTe$_2$. This type of transverse current is not present in wires made from a single uniform layer of a material with resistance anisotropy, but will result whenever a material with resistance anisotropy is integrated into a heterostructure with materials having different resistivities, thereby producing a spatially non-uniform pattern of current flow. This effect will therefore influence measurements in a wide variety of heterostructures incorporating 2D TMD materials and other materials with low crystal symmetries.

cond-mat.mes-hall↗

arXiv2017

Band-structure-dependence of renormalization-group prediction on pairing channels

Recent experimental advances in using strain engineering to significantly alter the band structure of moderately correlated systems offer opportunities and challenges to weak-coupling renormalization group (RG) analysis approaches for predicting superconducting instabilities. On one hand, the RG approach can provide theoretical guidance. On the other hand, it is now imperative to better understand how the predictions of the RG approach depends on microscopic and non-universal model details. Here we focus on the effect of band-selective mass-renormalization often observed in angle resolved photoemission spectroscopy. Focusing on a specific example of uniaxially strained $\rm{Sr_2RuO_4}$ we carry out the weak-coupling RG analysis from two sets of band structures as starting points: one is based on density functional theory (DFT) calculations and the other is based on angle-resolved photoemission spectroscopy (ARPES) measurements. Despite good agreement between the Fermi surfaces of the the two band structures we find the two sets of band structures to predict qualitatively different trends in the strain dependence of the superconducting transition temperature $T_c$ as well as the dominant channel.

cond-mat.supr-con↗

arXiv2016

Domains and ferroelectric switching pathways in Ca$_3$Ti$_2$O$_7$ from first principles

Hybrid improper ferroelectricity, where an electrical polarization can be induced via a trilinear coupling to two non-polar structural distortions of different symmetry, has recently been experimentally demonstrated for the first time in the $n$=2 Ruddlesden-Popper compound Ca$_3$Ti$_2$O$_7$. In this paper we use group theoretic methods and first-principles calculations to identify possible ferroelectric switching pathways in Ca$_3$Ti$_2$O$_7$. We identify low-energy paths that reverse the polarization direction by switching via an orthorhombic twin domain, or via an antipolar structure. We also introduce a chemically intuitive set of local order parameters to give insight into how these paths are relevant to switching nucleated at domain walls. Our findings suggest that switching may proceed via more than one mechanism in this material.

cond-mat.mtrl-sci↗

arXiv2016

Manipulating superconductivity in ruthenates through Fermi surface engineering

The key challenge in superconductivity research is to go beyond the historical mode of discovery-driven research. We put forth a new strategy, which is to combine theoretical developments in the weak-coupling renormalization group approach with the experimental developments in lattice strain driven Fermi surface-engineering. For concreteness we theoretically investigate how superconducting tendencies will be affected by strain engineering of ruthenates' Fermi surface. We first demonstrate that our approach qualitatively reproduces recent experiments under uniaxial strain. We then note that order few $\%$ strain readily accessible to epitaxial thin films, can bring the Fermi surface close to van Hove singularity. Using the experimental observation of the change in the Fermi surface under biaxial epitaxial strain and ab-initio calculations, we predict ${\rm T}_{\rm c}$ for triplet pairing to be maximized by getting close to the van Hove singularities without tuning on to the singularity.

cond-mat.supr-con↗

arXiv2016

Topological Superconductivity in Metal/Quantum-Spin-Ice Heterostructures

The original proposal to achieve superconductivity by starting from a quantum spin-liquid (QSL) and doping it with charge carriers, as proposed by Anderson in 1987, has yet to be realized. Here we propose an alternative strategy: use a QSL as a substrate for heterostructure growth of metallic films to design exotic superconductors. By spatially separating the two key ingredients of superconductivity, i.e., charge carriers (metal) and pairing interaction (QSL), the proposed setup naturally lands on the parameter regime conducive to a controlled theoretical prediction. Moreover, the proposed setup allows us to "customize" electron-electron interaction imprinted on the metallic layer. The QSL material of our choice is quantum spin ice well-known for its emergent gauge-field description of spin frustration. Assuming the metallic layer forms an isotropic single Fermi pocket, we predict that the coupling between the emergent gauge-field and the electrons of the metallic layer will drive topological odd-parity pairing. We further present guiding principles for materializing the suitable heterostructure using ab initio calculations and describe the band structure we predict for the case of Y$_2$Sn$_{2-x}$Sb$_x$O$_7$ grown on the (111) surface of Pr$_2$Zr$_2$O$_7$. Using this microscopic information, we predict topological odd-parity superconductivity at a few Kelvin in this heterostructure, which is comparable to the $T_c$ of the only other confirmed odd-parity superconductor Sr$_2$RuO$_4$.

cond-mat.str-el↗

arXiv2015

Raman study of magnetic excitations and magneto-elastic coupling in alpha-SrCr2O4

Using Raman spectroscopy, we investigate the lattice phonons, magnetic excitations, and magneto-elastic coupling in the distorted triangular-lattice Heisenberg antiferromagnet alpha-SrCr2O4, which develops helical magnetic order below 43 K. Temperature dependent phonon spectra are compared to predictions from density functional theory calculations which allows us to assign the observed modes and identify weak effects arising from coupled lattice and magnetic degrees of freedom. Raman scattering associated with two-magnon excitations is observed at 20 meV and 40 meV. These energies are in general agreement with our ab-initio calculations of exchange interactions and earlier theoretical predictions of the two-magnon Raman response of triangular-lattice antiferromagnets. The temperature dependence of the two-magnon excitations indicates that spin correlations persist well above the Néel temperature.

cond-mat.str-el↗

arXiv2014

Turning ABO$_3$ antiferroelectrics into ferroelectrics: Design rules for practical rotation-driven ferroelectricity in double perovskites and A$_3$B$_2$O$_7$ Ruddlesden-Popper compounds

Ferroic transition metal oxides, which exhibit spontaneous elastic, electrical, magnetic or toroidal order, exhibit functional properties that find use in ultrastable solid-state memories to sensors and medical imaging technologies. To realize multifunctional behavior, where one order parameter can be coupled to the conjugate field of another order parameter, however, requires a common microscopic origin for the long-range order. Here, we formulate a complete theory for a novel form of ferroelectricity, whereby a spontaneous and switchable polarization emerges from the destruction of an antiferroelectric state due to octahedral rotations and ordered cation sublattices. We then construct a materials design framework based on crystal-chemistry descriptors rooted in group theory, which enables the facile design of artificial oxides with large electric polarizations, P, simultaneous with small energetic switching barriers between +P and -P. We validate the theory with first principles density functional calculations on more than 16 perovskite-structured oxides, illustrating it could be operative in any materials classes exhibiting two- or three-dimensional corner-connected octahedral frameworks. We show the principles governing materials selection of the "layered" systems originate in the lattice dynamics of the A cation displacements stabilized by the pervasive BO$_6$ rotations of single phase ABO$_3$ materials, whereby the latter distortions govern the optical band gaps, magnetic order and critical transition temperatures. Our approach provides the elusive route to the ultimate multifunctionality property control by an external electric field.

cond-mat.mtrl-sci↗

arXiv2014

Linear magnetoelectricity at room temperature in perovskite superlattices by design

Discovering materials that display a linear magnetoelectric effect at room temperature is challenge. Such materials could facilitate novel devices based on the electric-field control of magnetism. Here we present simple, chemically intuitive design rules to identify a new class of bulk magnetoelectric materials based on the 'bicolor' layering of $Pnma$ ferrite perovskites, e.g., LaFeO$_3$/ LnFeO$_3$ superlattices for which Ln = lanthanide cation. We use first-principles density-functional theory calculations to confirm these ideas. Additionally, we elucidate the origin of this effect and show it is a general consequence of the layering of any bicolor, $Pnma$ perovskite superlattice in which the number of constituent layers are odd (leading to a form of hybrid improper ferroelectricity) and Goodenough- Kanamori rules. Here, the polar distortions induce both weak ferromagnetism and a linear magnetoelectric effect. Our calculations suggest that the effect is 2-3 times greater in magnitude than that observed for the prototypical magnetoelectric material, Cr$_2$O$_3$. We use a simple mean field model to show that the considered materials order magnetically above room temperature.

cond-mat.mtrl-sci↗

arXiv2013

Origin of giant spin-lattice coupling and the suppression of ferroelectricity in EuTiO3 from first principles

We elucidate the microscopic mechanism that causes a suppression of ferroelectricity and an enhancement of octahedral rotations in EuTiO3 from first principles. We find that the hybridization of the rare-earth Eu 4f states with the B-site Ti cation drives the system away from ferroelectricity. We also show that the magnetic order dependence of this hybridization is the dominant source of spin-phonon coupling in this material. Our results underline the importance of rare-earth f electrons on the lattice dynamics and stability of these transition metal oxides.

cond-mat.mtrl-sci↗

arXiv2013

Bulk magnetoelectricity in the hexagonal manganites and ferrites

Improper ferroelectricity (trimerization) in the hexagonal manganites RMnO$_3$ leads to a network of coupled structural and magnetic vortices that induce domain wall magnetoelectricity and magnetization neither of which, however, occurs in the bulk. Here we combined first-principles calculations, group-theoretic techniques, and microscopic spin models to show how the trimerization not only induces a polarization but also a bulk magnetization and bulk magnetoelectric (ME) effect. This results in the existence of a bulk linear ME vortex structure or a bulk ME coupling such that if direction of polarization reverses so does magnetization. To measure the predicted ME vortex, we suggest RMnO$_3$ under large magnetic field. We suggest a family of materials, the hexagonal RFeO$_3$ ferrites, also display the predicted phenomena in their ground state.

cond-mat.mtrl-sci↗

arXiv2013

Why Are There So Few Perovskite Ferroelectrics?

We use a combination of symmetry arguments and first-principles calculations to explore the connection between structural distortions and ferroelectricity in the perovskite family of materials. We explain the role of octahedral rotations in suppressing ferroelectricity in these materials and show that, as the tolerance factor decreases, rotations alone cannot fully suppress ferroelectricity. Our results show that it is cation displacements (`hidden' in Glazer notation) that accompany the rotations, rather than the rotations themselves, that play the decisive role in suppressing ferroelectricity in these cases. We use the knowledge gained in our analysis of this problem to explain the origin of ferroelectricity in $R3c$ materials such as FeTiO$_3$ and ZnSnO$_3$ and to suggest strategies for the design and synthesis of new perovskite ferroelectrics. Our results have implications not only for the fundamental crystal chemistry of the perovskites but also for the discovery of new functional materials.

cond-mat.mtrl-sci↗