arXiv subjects

Cristian Marchioli

Publications and source records attributed to Cristian Marchioli.

12 recordsLinked to original sources

arXiv2025

Inertial rotation of a small oblate spheroid in a simple shear flow

We compare experiments and fully-resolved particle simulations designed to match the experimental conditions of a weakly inertial, neutrally buoyant, moderately oblate spheroid in shear flow under confinement. Experimental and numerical results are benchmarked against theory valid for asymptotically small particle Reynolds numbers and for unconfined systems. By considering the combined effects of confinement and inertia, sensitivity to initial conditions, and the time span of observation, we reconcile the findings of theory, experiments, and numerical simulations. Furthermore, we demonstrate that confinement significantly influences the orientational stability of log-rolling spheroids compared to weak inertia, with the primary consequence being a reduced drift rate towards the stable log-rolling orbit.

physics.flu-dyn↗

arXiv2024

Morphodynamics of melting ice over turbulent warm water streams

We investigate the morphodynamics of an ice layer over a turbulent stream of warm water using numerical simulations. At low water speeds, characteristic streamwise undulations appear, which can be explained by the Reynolds analogy between heat and momentum transfer. As the water speed increases, these undulations combine with spanwise ripples of a much greater length scale. These ripples are generated by a melting mechanism controlled by the instability originating from the ice-water interactions, and, through a melting/freezing process, they evolve downstream with a migration velocity much slower than the turbulence characteristic velocity.

physics.flu-dyn↗

arXiv2023

Particle interaction with binary-fluid interfaces in the presence of wetting effects

In this paper, we present an Eulerian-Lagrangian methodology to simulate the interaction between a fluid-fluid interface and a solid particle in the presence of wetting effects. The target physical problem is represented by ternary phase systems in which a solid phase and a drop phase interact inside an incompressible Newtonian carrier fluid. The methodology is based on an Eulerian-Lagrangian approach that allows for the numerical solution of the Continuity and Navier-Stokes equations by using a pseudo-spectral method, whereas the drop phase is modelled by the Phase Field Method, in which a smooth transition layer represented by an hyperbolic function is considered both across the solid-fluid interface and across the drop-fluid interface. Finally, the solid phase is described in the form of a virtual force using the Direct Forcing Immersed Boundary approach. The properties of the immersed solid phase (including wetting effects), the deformability of the drops and the characteristics of the carrier fluid flow are the main controlling parameters. To simulate a ternary phase system, the solid phase is coupled to the binary-fluid phase by introducing a single well potential in the free-energy density functional, which can also control the solid surface wetting property. The capabilities of the methodology are proven by examining first 2D and 3D validation cases in which a solid particle is settling in a quiescent fluid. Then, the interaction of solid particles with a binary-fluid interface and the effects of surface wetting on the submergence of a quasi-buoyant body are discussed. Finally, the equilibrium configuration for a solid particle interacting with an equally-sized drop at different contact angles and the relative rotation of two solid particles bridged by a drop are examined in the case the interaction is induced by shear fluid flow deformations on the drop interface.

physics.flu-dyn↗

arXiv2023

Experimental Study on the Detection of Frozen Diffused Ammonia Blockage in the Inactive Section of a Variable Conductance Heat Pipe

Variable Conductance Heat Pipes (VCHP) are mainly employed to cool down electronic systems in spacecraft applications, as they can handle high temperature fluctuations in their cold source, preventing thus the systems from damaging. These fluctuations, as well as ultra-low temperatures, are always present in outer space, and one of the key steps in a VCHP design is therefore to make sure that they endure these conditions. However, not much has been written about their resilience during and after a long exposition to subfreezing conditions, i.e. temperatures lower than the freezing point of the working fluid. In this paper we implement and validate a computational routine based on a modified Flat-Front Approach to predict the VCHP temperature profile and to determine the location of the gas-vapor front. Then we continuously expose an ammonia/stainless-steel VCHP to temperatures below the ammonia freezing point for 211 hours, to later examine the formation and subsequent dynamics of a thin block of frozen ammonia which is diffused into the inactive part of the heat pipe condenser. We describe as well how a strong correlation between the adiabatic section and the reservoir temperatures is maintained (or broken) upon the occurrence (or absence) of the blockage of frozen ammonia.

physics.flu-dyn↗

arXiv2022

Experimental assessment of mixing layer scaling laws in Rayleigh-Taylor instability

We assess experimentally the scaling laws that characterize the mixing region produced by the Rayleigh-Taylor instability in a confined porous medium. In particular, we wish to assess experimentally the existence of a superlinear scaling for the growth of the mixing region, which was observed in recent two-dimensional simulations. To this purpose, we use a Hele-Shaw cell. The flow configuration consists of a heavy fluid layer overlying a lighter fluid layer, initially separated by a horizontal, flat interface. When small perturbations of concentration and velocity fields occur at the interface, convective mixing is eventually produced: Perturbations grow and evolve into large finger-like convective structures that control the transition from the initial diffusion-dominated phase of the flow to the subsequent convection-dominated phase. As the flow evolves, diffusion acts to reduce local concentration gradients across the interface of the fingers. When the gradients become sufficiently small, the system attains a stably-stratified state and diffusion is again the dominant mixing mechanisms. We employ an optical method to obtain high-resolution measurements of the density fields and we perform experiments for values of the Rayleigh-Darcy number (i.e., the ratio between convection and diffusion) sufficiently large to exhibit all the flow phases just described, which we characterize via the mixing length, a measure of the extension of the mixing region. We are able to confirm that the growth of the mixing length during the convection-dominated phase follows the superlinear scaling predicted by previous simulations.

physics.flu-dyn↗

arXiv2020

Particle capture by drops in turbulent flow

We examine the process of particle capture by large deformable drops in turbulent channel flow. We simulate the solid-liquid-liquid three-phase flow with an Eulerian-Lagrangian method based on Direct Numerical Simulation of turbulence coupled with a Phase Field Model, to capture the interface dynamics, and Lagrangian tracking of small (sub-Kolmogorov) particles. Drops have same density and viscosity of the carrier liquid, and neutrally-buoyant solid particles are one-way coupled with the other phases. Our results show that particles are transported towards the interface by jet-like turbulent motions and, once close enough, are captured by interfacial forces in regions of positive surface velocity divergence. These regions appear to be well correlated with high-enstrophy flow topologies that contribute to enstrophy production via vortex compression or stretching. Examining the turbulent mechanisms that bring particles to the interface, we have been able to derive a simple mechanistic model for particle capture. The model can predict the overall capture efficiency and is based on a single turbulent transport equation in which the only parameter scales with the turbulent kinetic energy of the fluid measured in the vicinity of the drop interface. The model is valid in the limit of non-interacting particles and its predictions agree remarkably well with numerical results.

physics.flu-dyn↗

arXiv2016

Lagrangian filtered density function for LES-based stochastic modelling of turbulent dispersed flows

The Eulerian-Lagrangian approach based on Large-Eddy Simulation (LES) is one of the most promising and viable numerical tools to study turbulent dispersed flows when the computational cost of Direct Numerical Simulation (DNS) becomes too expensive. The applicability of this approach is however limited if the effects of the Sub-Grid Scales (SGS) of the flow on particle dynamics are neglected. In this paper, we propose to take these effects into account by means of a Lagrangian stochastic SGS model for the equations of particle motion. The model extends to particle-laden flows the velocity-filtered density function method originally developed for reactive flows. The underlying filtered density function is simulated through a Lagrangian Monte Carlo procedure that solves for a set of Stochastic Differential Equations (SDEs) along individual particle trajectories. The resulting model is tested for the reference case of turbulent channel flow, using a hybrid algorithm in which the fluid velocity field is provided by LES and then used to advance the SDEs in time. The model consistency is assessed in the limit of particles with zero inertia, when "duplicate fields" are available from both the Eulerian LES and the Lagrangian tracking. Tests with inertial particles were performed to examine the capability of the model to capture particle preferential concentration and near-wall segregation. Upon comparison with DNS-based statistics, our results show improved accuracy and considerably reduced errors with respect to the case in which no SGS model is used in the equations of particle motion.

physics.flu-dyn↗

arXiv2015

Turbulent breakage of ductile aggregates

In this paper we study breakage rate statistics of small colloidal aggregates in non-homogeneous anisotropic turbulence. We use pseudo-spectral direct numerical simulation of turbulent channel flow and Lagrangian tracking to follow the motion of the aggregates, modelled as sub-Kolmogorov massless particles. We focus specifically on the effects produced by ductile rupture: This rupture is initially activated when fluctuating hydrodynamic stresses exceed a critical value, $σ>σ_{cr}$, and is brought to completion when the energy absorbed by the aggregate meets the critical breakage value. We show that ductile rupture breakage rates are significantly reduced with respect to the case of instantaneous brittle rupture (i.e. breakage occurs as soon as $σ>σ_{cr}$). These discrepancies are due to the different energy values at play as well as to the statistical features of energy distribution in the anisotropic turbulence case examined.

physics.flu-dyn↗

arXiv2015

Numerical simulations of aggregate breakup in bounded and unbounded turbulent flows

Breakup of small aggregates in fully developed turbulence is studied by means of direct numerical simulations in a series of typical bounded and unbounded flow configurations, such as a turbulent channel flow, a developing boundary layer and homogeneous isotropic turbulence. The simplest criterion for breakup is adopted, whereas aggregate breakup occurs when the local hydrodynamic stress $σ\sim \varepsilon^{1/2}$, with $\varepsilon$ being the energy dissipation at the position of the aggregate, overcomes a given threshold $σ_\mathrm{cr}$, which is characteristic for a given type of aggregates. Results show that the breakup rate decreases with increasing threshold. For small thresholds, it develops a universal scaling among the different flows. For high thresholds, the breakup rates show strong differences between the different flow configurations, highlighting the importance of non-universal mean-flow properties. To further assess the effects of flow inhomogeneity and turbulent fluctuations, theresults are compared with those obtained in a smooth stochastic flow. Furthermore, we discuss the limitations and applicability of a set of independent proxies.

physics.flu-dyn↗

arXiv2013

Time persistency of floating particle clusters in free-surface turbulence

We study the dispersion of light particles floating on a flat shear-free surface of an open channel in which the flow is turbulent. This configuration mimics the motion of buoyant matter (e.g. phytoplankton, pollutants or nutrients) in water bodies when surface waves and ripples are smooth or absent. We perform direct numerical simulation of turbulence coupled with Lagrangian particle tracking, considering different values of the shear Reynolds number (Reτ = 171 and 509) and of the Stokes number (0.06 < St < 1 in viscous units). Results show that particle buoyancy induces clusters that evolve towards a long-term fractal distribution in a time much longer than the Lagrangian integral fluid time scale, indicating that such clusters over-live the surface turbulent structures which produced them. We quantify cluster dynamics, crucial when modeling dispersion in free-surface flow turbulence, via the time evolution of the cluster correlation dimension.

physics.flu-dyn↗

arXiv2011

Statistical properties of an ideal subgrid-scale correction for Lagrangian particle tracking in turbulent channel flow

One issue associated with the use of Large-Eddy Simulation (LES) to investigate the dispersion of small inertial particles in turbulent flows is the accuracy with which particle statistics and concentration can be reproduced. The motion of particles in LES fields may differ significantly from that observed in experiments or direct numerical simulation (DNS) because the force acting on the particles is not accurately estimated, due to the availability of the only filtered fluid velocity, and because errors accumulate in time leading to a progressive divergence of the trajectories. This may lead to different degrees of inaccuracy in the prediction of statistics and concentration. We identify herein an ideal subgrid correction of the a-priori LES fluid velocity seen by the particles in turbulent channel flow. This correction is computed by imposing that the trajectories of individual particles moving in filtered DNS fields exactly coincide with the particle trajectories in a DNS. In this way the errors introduced by filtering into the particle motion equations can be singled out and analyzed separately from those due to the progressive divergence of the trajectories. The subgrid correction term, and therefore the filtering error, is characterized in the present paper in terms of statistical moments. The effects of the particle inertia and of the filter type and width on the properties of the correction term are investigated.

physics.flu-dyn↗

arXiv2008

Direct Numerical Simulation of Turbulent Heat Transfer Modulation in Micro-Dispersed Channel Flow

The object of this paper is to study the influence of dispersed micrometer size particles on turbulent heat transfer mechanisms in wall-bounded flows. The strategic target of the current research is to set up a methodology to size and design new-concept heat transfer fluids with properties given by those of the base fluid modulated by the presence of dynamically-interacting, suitably-chosen, discrete micro- and nano- particles. We run Direct Numerical Simulation (DNS) for hydrodynamically fully-developed, thermally-developing turbulent channel flow at shear Reynolds number Re=150 and Prandtl number Pr=3, and we tracked two large swarms of particles, characterized by different inertia and thermal inertia. Preliminary results on velocity and temperature statistics for both phases show that, with respect to single-phase flow, heat transfer fluxes at the walls increase by roughly 2% when the flow is laden with the smaller particles, which exhibit a rather persistent stability against non-homogeneous distribution and near-wall concentration. An opposite trend (slight heat transfer flux decrease) is observed when the larger particles are dispersed into the flow. These results are consistent with previous experimental findings and are discussed in the frame of the current research activities in the field. Future developments are also outlined.

physics.flu-dyn↗