arXiv subjects

Cristina Olaverri-Monreal

Publications and source records attributed to Cristina Olaverri-Monreal.

At least 37 records · Page 2Linked to original sources

arXiv2025

Interaction of Autonomous and Manually Controlled Vehicles Multiscenario Vehicle Interaction Dataset

The acquisition and analysis of high-quality sensor data constitute an essential requirement in shaping the development of fully autonomous driving systems. This process is indispensable for enhancing road safety and ensuring the effectiveness of the technological advancements in the automotive industry. This study introduces the Interaction of Autonomous and Manually-Controlled Vehicles (IAMCV) dataset, a novel and extensive dataset focused on inter-vehicle interactions. The dataset, enriched with a sophisticated array of sensors such as Light Detection and Ranging, cameras, Inertial Measurement Unit/Global Positioning System, and vehicle bus data acquisition, provides a comprehensive representation of real-world driving scenarios that include roundabouts, intersections, country roads, and highways, recorded across diverse locations in Germany. Furthermore, the study shows the versatility of the IAMCV dataset through several proof-of-concept use cases. Firstly, an unsupervised trajectory clustering algorithm illustrates the dataset's capability in categorizing vehicle movements without the need for labeled training data. Secondly, we compare an online camera calibration method with the Robot Operating System-based standard, using images captured in the dataset. Finally, a preliminary test employing the YOLOv8 object-detection model is conducted, augmented by reflections on the transferability of object detection across various LIDAR resolutions. These use cases underscore the practical utility of the collected dataset, emphasizing its potential to advance research and innovation in the area of intelligent vehicles.

cs.RO↗

arXiv2025

Road Markings Segmentation from LIDAR Point Clouds using Reflectivity Information

Lane detection algorithms are crucial for the development of autonomous vehicles technologies. The more extended approach is to use cameras as sensors. However, LIDAR sensors can cope with weather and light conditions that cameras can not. In this paper, we introduce a method to extract road markings from the reflectivity data of a 64-layers LIDAR sensor. First, a plane segmentation method along with region grow clustering was used to extract the road plane. Then we applied an adaptive thresholding based on Otsu s method and finally, we fitted line models to filter out the remaining outliers. The algorithm was tested on a test track at 60km/h and a highway at 100km/h. Results showed the algorithm was reliable and precise. There was a clear improvement when using reflectivity data in comparison to the use of the raw intensity data both of them provided by the LIDAR sensor.

cs.RO↗

arXiv2025

Extraction of Road Users' Behavior From Realistic Data According to Assumptions in Safety-Related Models for Automated Driving Systems

In this work, we utilized the methodology outlined in the IEEE Standard 2846-2022 for "Assumptions in Safety-Related Models for Automated Driving Systems" to extract information on the behavior of other road users in driving scenarios. This method includes defining high-level scenarios, determining kinematic characteristics, evaluating safety relevance, and making assumptions on reasonably predictable behaviors. The assumptions were expressed as kinematic bounds. The numerical values for these bounds were extracted using Python scripts to process realistic data from the UniD dataset. The resulting information enables Automated Driving Systems designers to specify the parameters and limits of a road user's state in a specific scenario. This information can be utilized to establish starting conditions for testing a vehicle that is equipped with an Automated Driving System in simulations or on actual roads.

cs.RO↗

arXiv2024

Inadequate contrast ratio of road markings as an indicator for ADAS failure

Road markings were reported as critical road safety features, equally needed for both human drivers and for machine vision technologies utilised by advanced driver assistance systems (ADAS) and in driving automation. Visibility of road markings is achieved because of their colour contrasting with the roadway surface. During recent testing of an open-source camera-based ADAS under several visibility conditions (day, night, rain, glare), significant failures in trajectory planning were recorded and quantified. Consistently, better ADAS reliability under poor visibility conditions was achieved with Type II road markings (i.e. structured markings, facilitating moisture drainage) as compared to Type I road marking (i.e. flat lines). To further understand these failures, analysis of contrast ratio of road markings, which the tested ADAS was detecting for traffic lane recognition, was performed. The highest contrast ratio (greater than 0.5, calculated per Michelson equation) was measured at night in the absence of confounding factors, with statistically significant difference of 0.1 in favour of Type II road markings over Type I. Under daylight conditions, contrast ratio was reduced, with slightly higher values measured with Type I. The presence of rain or wet roads caused the deterioration of the contrast ratio, with Type II road markings exhibiting significantly higher contrast ratio than Type I, even though the values were low (less than 0.1). These findings matched the output of the ADAS related to traffic lane detection and underlined the importance of road marking visibility. Inadequate lane recognition by ADAS was associated with very low contrast ratio of road markings indeed. Importantly, specific minimum contrast ratio value could not be found, which was due to the complexity of ADAS algorithms...

cs.CV↗

arXiv2024

Want a Ride? Attitudes Towards Autonomous Driving and Behavior in Autonomous Vehicles

Research conducted previously has focused on either attitudes toward or behaviors associated with autonomous driving. In this paper, we bridge these two dimensions by exploring how attitudes towards autonomous driving influence behavior in an autonomous car. We conducted a field experiment with twelve participants engaged in non-driving related tasks. Our findings indicate that attitudes towards autonomous driving do not affect participants' driving interventions in vehicle control and eye glance behavior. Therefore, studies on autonomous driving technology lacking field tests might be unreliable for assessing the potential behaviors, attitudes, and acceptance of autonomous vehicles.

cs.RO↗

arXiv2024

Facial Features Integration in Last Mile Delivery Robots

Delivery services have undergone technological advancements, with robots now directly delivering packages to recipients. While these robots are designed for efficient functionality, they have not been specifically designed for interactions with humans. Building on the premise that incorporating human-like characteristics into a robot has the potential to positively impact technology acceptance, this study explores human reactions to a robot characterized with facial expressions. The findings indicate a correlation between anthropomorphic features and the observed responses.

cs.RO↗

arXiv2023

On Transferability of Driver Observation Models from Simulated to Real Environments in Autonomous Cars

For driver observation frameworks, clean datasets collected in controlled simulated environments often serve as the initial training ground. Yet, when deployed under real driving conditions, such simulator-trained models quickly face the problem of distributional shifts brought about by changing illumination, car model, variations in subject appearances, sensor discrepancies, and other environmental alterations. This paper investigates the viability of transferring video-based driver observation models from simulation to real-world scenarios in autonomous vehicles, given the frequent use of simulation data in this domain due to safety issues. To achieve this, we record a dataset featuring actual autonomous driving conditions and involving seven participants engaged in highly distracting secondary activities. To enable direct SIM to REAL transfer, our dataset was designed in accordance with an existing large-scale simulator dataset used as the training source. We utilize the Inflated 3D ConvNet (I3D) model, a popular choice for driver observation, with Gradient-weighted Class Activation Mapping (Grad-CAM) for detailed analysis of model decision-making. Though the simulator-based model clearly surpasses the random baseline, its recognition quality diminishes, with average accuracy dropping from 85.7% to 46.6%. We also observe strong variations across different behavior classes. This underscores the challenges of model transferability, facilitating our research of more robust driver observation systems capable of dealing with real driving conditions.

cs.CV↗

arXiv2023

Naturalistic yielding behavior of drivers at an unsignalized intersection based on survival analysis

In recent years, autonomous vehicles have become increasingly popular, leading to extensive research on their safe and efficient operation. Understanding road yielding behavior is crucial for incorporating the appropriate driving behavior into algorithms. This paper focuses on investigating drivers' yielding behavior at unsignalized intersections. We quantified and modelled the speed reduction time for vulnerable road users at a zebra crossing using parametric survival analysis. We then evaluated the impact of speed reduction time in two different interaction scenarios, compared to the baseline condition of no interaction through an accelerated failure time regression model with the log-logistic distribution. The results demonstrate the unique characteristics of each yielding behavior scenario, emphasizing the need to account for these variations in the modelling process of autonomous vehicles.

stat.AP↗

arXiv2023

Development of a ROS-based Architecture for Intelligent Autonomous on Demand Last Mile Delivery

This paper presents the development of the JKU-ITS Last Mile Delivery Robot. The proposed approach utilizes a combination of one 3D LIDAR, RGB-D camera, IMU and GPS sensor on top of a mobile robot slope mower. An embedded computer, running ROS1, is utilized to process the sensor data streams to enable 2D and 3D Simultaneous Localization and Mapping, 2D localization and object detection using a convolutional neural network.

cs.RO↗

arXiv2023

Uncertainty-Aware Vehicle Energy Efficiency Prediction using an Ensemble of Neural Networks

The transportation sector accounts for about 25% of global greenhouse gas emissions. Therefore, an improvement of energy efficiency in the traffic sector is crucial to reducing the carbon footprint. Efficiency is typically measured in terms of energy use per traveled distance, e.g. liters of fuel per kilometer. Leading factors that impact the energy efficiency are the type of vehicle, environment, driver behavior, and weather conditions. These varying factors introduce uncertainty in estimating the vehicles' energy efficiency. We propose in this paper an ensemble learning approach based on deep neural networks (ENN) that is designed to reduce the predictive uncertainty and to output measures of such uncertainty. We evaluated it using the publicly available Vehicle Energy Dataset (VED) and compared it with several baselines per vehicle and energy type. The results showed a high predictive performance and they allowed to output a measure of predictive uncertainty.

cs.LG↗

arXiv2023

Method for Comparison of Surrogate Safety Measures in Multi-Vehicle Scenarios

With the race towards higher levels of automation in vehicles, it is imperative to guarantee the safety of all involved traffic participants. Yet, while high-risk traffic situations between two vehicles are well understood, traffic situations involving more vehicles lack the tools to be properly analyzed. This paper proposes a method to compare Surrogate Safety Measures values in highway multi-vehicle traffic situations such as lane-changes that involve three vehicles. This method allows for a comprehensive statistical analysis and highlights how the safety distance between vehicles is shifted in favor of the traffic conflict between the leading vehicle and the lane-changing vehicle.

cs.RO↗

arXiv2023

Uncertainty-Aware Prediction of Battery Energy Consumption for Hybrid Electric Vehicles

The usability of vehicles is highly dependent on their energy consumption. In particular, one of the main factors hindering the mass adoption of electric (EV), hybrid (HEV), and plug-in hybrid (PHEV) vehicles is range anxiety, which occurs when a driver is uncertain about the availability of energy for a given trip. To tackle this problem, we propose a machine learning approach for modeling the battery energy consumption. By reducing predictive uncertainty, this method can help increase trust in the vehicle's performance and thus boost its usability. Most related work focuses on physical and/or chemical models of the battery that affect the energy consumption. We propose a data-driven approach which relies on real-world datasets including battery related attributes. Our approach showed an improvement in terms of predictive uncertainty as well as in accuracy compared to traditional methods.

cs.LG↗

arXiv2023

Evaluating the acceptance of autonomous vehicles in the future

The continuous advance of the automotive industry is leading to the emergence of more advanced driver assistance systems that enable the automation of certain tasks and that are undoubtedly aimed at achieving vehicles in which the driving task can be completely delegated. All these advances will bring changes in the paradigm of the automotive market, as is the case of insurance. For this reason, CESVIMAP and the Universidad Carlos III de Madrid are working on an Autonomous Testing pLatform for insurAnce reSearch (ATLAS) to study this technology and obtain first-hand knowledge about the responsibilities of each of the agents involved in the development of the vehicles of the future. This work gathers part of the advancements made in ATLAS, which have made it possible to have an autonomous vehicle with which to perform tests in real environments and demonstrations bringing the vehicle closer to future users. As a result of this work, and in collaboration with the Johannes Kepler University Linz, the impact, degree of acceptance and confidence of users in autonomous vehicles has been studied once they have taken a trip on board a fully autonomous vehicle such as ATLAS. This study has found that, while most users would be willing to use an autonomous vehicle, the same users are concerned about the use of this type of technology. Thus, understanding the reasons for this concern can help define the future of autonomous cars.

cs.RO↗

arXiv2023

JKU-ITS Automobile for Research on Autonomous Vehicles

In this paper, we present our brand-new platform for Automated Driving research. The chosen vehicle is a RAV4 hybrid SUV from TOYOTA provided with exteroceptive sensors such as a multilayer LIDAR, a monocular camera, Radar and GPS; and proprioceptive sensors such as encoders and a 9-DOF IMU. These sensors are integrated in the vehicle via a main computer running ROS1 under Linux 20.04. Additionally, we installed an open-source ADAS called Comma Two, that runs Openpilot to control the vehicle. The platform is currently being used to research in the field of autonomous vehicles, human and autonomous vehicles interaction, human factors, and energy consumption.

cs.RO↗

arXiv2022

Implementation of Road Safety Perception in Autonomous Vehicles in a Lane Change Scenario

Understanding human driving behavior is crucial to develop autonomous vehicles' algorithms. However, most low level automation, such as the one in advanced driving assistance systems (ADAS), is based on objective safety measures, which are not always aligned with what the drivers perceive as safe and their correspondent driving behavior. Finding the bridge between the subjective perception and objective safety measures has been analyzed in this paper focusing specifically on lane-change scenarios. Results showed statistically significant differences between what is perceived as safe by drivers and objective metrics depending on the specific maneuver and location of drivers.

cs.RO↗

arXiv2022

Hybrid On/Off Blockchain Approach for Vehicle Data Management, Processing and Visualization Exemplified by the ADAPT Platform

Hybrid on/off-blockchain vehicle data management approaches have received a lot of attention in recent years. However, there are various technical challenges remained to deal with. In this paper we relied on real-world data from Austria to investigate the effects of connectivity on the transport of personal protective equipment. We proposed a three-step mechanism to process, simulate, and store/visualize aggregated vehicle datasets together with a formal pipeline process workflow model. To this end, we implemented a hybrid blockchain platform based on the hyperledger fabric and gluster file systems. The obtained results demonstrated efficiency and stability for both hyperledger fabric and gluster file systems and ability of the both on/off-blockchain mechanisms to meet the platform quality of service requirements

cs.DC↗

arXiv2022

Semi-Autonomous Electric Vehicles in Platooning Mode and Their Effects on Travel Time: A Framework for Simulation Evaluation

Connected and Automated Vehicles (CAVs) have received a lot of attention in recent years. However, there are still numerous challenges in this field. In this paper, we investigated the effects of dynamic-flexible platooning on travel time by considering real-world trips data. For this purpose we extended the platooning capabilities of the 3DCoAutosim simulation platform, and proposed a dynamic-flexible model that we validated by creating use cases on traffic efficiency. We studied our dynamic-flexible platooning case for three electric vans with an autonomous leader, a semi-autonomous first follower with a driver, and an autonomous last follower. Results showed that the model developed in this study is efficient to investigate the effects of dynamic-flexible platooning on travel time.

eess.SY↗

arXiv2022

Automated Driving Systems: Impact of Haptic Guidance on Driving Performance after a Take Over Request

In conditional automation, a response from the driver is expected when a take over request is issued due to unexpected events, emergencies, or reaching the operational design domain boundaries. Cooperation between the automated driving system and the driver can help to guarantee a safe and pleasant transfer if the driver is guided through a haptic guidance system that applies a slight counter-steering force to the steering wheel. We examine in this work the impact of haptic guidance systems on driving performance after a take over request was triggered to avoid sudden obstacles on the road. We studied different driver conditions that involved Non-Driving Related Tasks (NRDT). Results showed that haptic guidance systems increased road safety by reducing the lateral error, the distance and reaction time to a sudden obstacle and the number of collisions.

cs.HC↗