arXiv subjects

Cui-Zu Chang

Publications and source records attributed to Cui-Zu Chang.

At least 55 records · Page 3Linked to original sources

arXiv2022

Creation of Chiral Interface Channels for Quantized Transport in Magnetic Topological Insulator Multilayer Heterostructures

One-dimensional (1D) topologically protected states are usually formed at the interface between two-dimensional (2D) materials with different topological invariants. Therefore, 1D chiral interface channels (CICs) can be created at the boundary of two quantum anomalous Hall (QAH) insulators with different Chern numbers. Such a QAH junction can function as a chiral edge current distributer at zero magnetic field, but its realization remains challenging. Here, by employing an in-situ mechanical mask, we use molecular beam epitaxy (MBE) to synthesize QAH insulator junctions, in which two QAH insulators with different Chern numbers are connected along a 1D junction. For the junction between C = 1 and C = -1 QAH insulators, we observe quantized transport and demonstrate the appearance of the two parallel propagating CICs along the magnetic domain wall at zero magnetic field. Moreover, since the Chern number of the QAH insulators in magnetic topological insulator (TI)/TI multilayers can be tuned by altering magnetic TI/TI bilayer periods, the junction between two QAH insulators with arbitrary Chern numbers can be achieved by growing different periods of magnetic TI/TI on the two sides of the sample. For the junction between C = 1 and C = 2 QAH insulators, our quantized transport shows that a single CIC appears at the interface. Our work lays down the foundation for the development of QAH insulator-based electronic and spintronic devices, topological chiral networks, and topological quantum computations.

cond-mat.mes-hall↗

arXiv2022

Colloquium: Quantum anomalous Hall effect

The quantum Hall (QH) effect, quantized Hall resistance combined with zero longitudinal resistance, is the characteristic experimental fingerprint of Chern insulators - topologically non-trivial states of two-dimensional matter with broken time-reversal symmetry. In Chern insulators, non-trivial bulk band topology is expressed by chiral states that carry current along sample edges without dissipation. The quantum anomalous Hall (QAH) effect refers to QH effects that occur in the absence of external magnetic fields due to spontaneously broken time-reversal symmetry. The QAH effect has now been realized in four different classes of two-dimensional materials: (i) thin films of magnetically (Cr- and/or V-) doped topological insulators in the (Bi,Sb)2Te3 family, (ii) thin films of the intrinsic magnetic topological insulator MnBi2Te4, (iii) moiré materials formed from graphene, and (iv ) moiré materials formed from transition metal dichalcogenides. In this Article, we review the physical mechanisms responsible for each class of QAH insulator, highlighting both differences and commonalities, and comment on potential applications of the QAH effect.

cond-mat.mes-hall↗

arXiv2022

Confinement-Induced Chiral Edge Channel Interaction in Quantum Anomalous Hall Insulators

In quantum anomalous Hall (QAH) insulators, the interior is insulating but electrons can travel with zero resistance along one-dimensional conducting paths known as chiral edge channels (CECs). These CECs have been predicted to be confined to the one-dimensional (1D) edges and exponentially decay in the two-dimensional (2D) bulk. In this work, we present the results of a systematic study of QAH devices fashioned in a Hall bar geometry of different widths. At the charge neutral point, the QAH effect persists in a Hall bar device with a width of only ~72 nm, implying the intrinsic decaying length of CECs is less than ~36 nm. In the electron-doped regime, we find that the Hall resistance deviates quickly from the quantized value when the sample width is less than 1 um. Our theoretical calculations suggest that the deviation from the quantized Hall resistance in narrow QAH samples originates from the interaction between two opposite CECs mediated by disorder-induced bulk states in QAH insulators, consistent with our experimental observations.

cond-mat.mes-hall↗

arXiv2022

Electrical Switching of the Edge Current Chirality in Quantum Anomalous Hall Insulators

A quantum anomalous Hall (QAH) insulator is a topological state of matter, in which the interior is insulating but electrical current flows along the edges of the sample, in either clockwise (right-handed) or counter-clockwise (left-handed) direction dictated by the spontaneous magnetization orientation. Such chiral edge current (CEC) eliminates any backscattering, giving rise to quantized Hall resistance and zero longitudinal resistance. In this work, we fabricate mesoscopic QAH sandwich (i.e. magnetic topological insulator (TI)/TI/magnetic TI) Hall bar devices and succeed in switching the CEC chirality in QAH insulators through spin-orbit torque (SOT) by applying a current pulse and suitably controlled gate voltage. The well-quantized QAH states with opposite CEC chiralities are demonstrated through four- and three-terminal measurements before and after SOT switching. Our theoretical calculations show that the SOT that enables the magnetization switching can be generated by both bulk and surface carriers in QAH insulators, in good agreement with experimental observations. Current pulse-induced switching of the CEC chirality in QAH insulators will not only advance our knowledge in the interplay between magnetism and topological states but also expedite easy and instantaneous manipulation of the QAH state in proof-of-concept energy-efficient electronic and spintronic devices as well as quantum information applications.

cond-mat.mes-hall↗

arXiv2022

Crossover of Ising- to Rashba-Type Superconductivity in Epitaxial Bi2Se3/Monolayer NbSe2 Heterostructures

A topological insulator (TI) interfaced with an s-wave superconductor has been predicted to host an unusual form of superconductivity known as topological superconductivity (TSC). Molecular beam epitaxy (MBE) has been the primary approach in the scalable synthesis of the TI/superconductor heterostructures. Although the growth of epitaxial TI films on s-wave superconductors has been achieved, it remains an outstanding challenge for synthesizing atomically thin TI/superconductor heterostructures, which are critical for engineering the TSC phase. Here, we used MBE to grow Bi2Se3 films with the controlled thickness on monolayer NbSe2 and performed in-situ angle-resolved photoemission spectroscopy and ex-situ magneto-transport measurements on these Bi2Se3/monolayer NbSe2 heterostructures. We found that the emergence of Rashba-type bulk quantum well bands and spin-nondegenerate surface states coincides with a marked suppression of the in-plane upper critical magnetic field of the superconductivity in Bi2Se3/monolayer NbSe2 heterostructures. This is the signature of a crossover from Ising- to Rashba-type superconducting pairings, induced by altering Bi2Se3 film thickness. Our work opens a new route for exploring a robust TSC phase in TI/Ising superconductor heterostructures.

cond-mat.supr-con↗

arXiv2022

Elucidating proximity magnetism through polarized neutron reflectometry and machine learning

Polarized neutron reflectometry is a powerful technique to interrogate the structures of multilayered magnetic materials with depth sensitivity and nanometer resolution. However, reflectometry profiles often inhabit a complicated objective function landscape using traditional fitting methods, posing a significant challenge to parameter retrieval. In this work, we develop a data-driven framework to recover the sample parameters from polarized neutron reflectometry data with minimal user intervention. We train a variational autoencoder to map reflectometry profiles with moderate experimental noise to an interpretable, low-dimensional space from which sample parameters can be extracted with high resolution. We apply our method to recover the scattering length density profiles of the topological insulator-ferromagnetic insulator heterostructure Bi$_2$Se$_3$/EuS exhibiting proximity magnetism, in good agreement with the results of conventional fitting. We further analyze a more challenging reflectometry profile of the topological insulator-antiferromagnet heterostructure (Bi,Sb)$_2$Te$_3$/Cr$_2$O$_3$ and identify possible interfacial proximity magnetism in this material. We anticipate the framework developed here can be applied to resolve hidden interfacial phenomena in a broad range of layered systems.

cond-mat.mtrl-sci↗

arXiv2022

Evolution of Dopant-Concentration-Induced Magnetic Exchange Interaction in Topological Insulator Thin Films

Two essential ingredients for the quantum anomalous Hall (QAH) effect, i.e. topological and magnetic orders, can be combined by doping magnetic ions into a topological insulator (TI) film. Through this approach, the QAH effect has been realized in chromium (Cr)- and/or vanadium (V)-doped TI (Bi,Sb)2Te3 thin films. In this work, we synthesize both V- and Cr-doped Bi2Te3 thin films with controlled dopant concentration using molecular beam epitaxy (MBE). By performing magneto-transport measurements, we find that both systems show an unusual but yet similar ferromagnetic response with respect to magnetic dopant concentration, specifically the Curie temperature does not increase monotonically but shows a local maximum at a critical dopant concentration. Our angle-resolved photoemission spectroscopy (ARPES) measurements show that the Cr/V doping introduces hole carriers into Bi2Te3, which consequently move the chemical potential toward the charge neutral point. In addition, the Cr/V doping also reduces the spin-orbit coupling of Bi2Te3 which drives it from a nontrivial TI to a trivial semiconductor. The unusual ferromagnetic response observed in Cr/V-doped Bi2Te3 thin films is attributed to the dopant-concentration-induced magnetic exchange interaction, which displays the evolution from the van Vleck-type ferromagnetism in a nontrivial magnetic TI to the Ruderman-Kittel-Kasuya-Yosida (RKKY)-type ferromagnetism in a trivial diluted magnetic semiconductor. Our work provides insights into the ferromagnetic properties of magnetically doped TI thin films and facilitates the pursuit of high-temperature QAH effect.

cond-mat.mes-hall↗

arXiv2022

Selective Trapping of Hexagonally Warped Topological Surface States in a Triangular Quantum Corral

The surface of a three-dimensional topological insulator (TI) hosts two-dimensional massless Dirac fermions (DFs), the gapless and spin-helical nature of which yields many exotic phenomena, such as the immunity of topological surface states (TSS) to back-scattering. This leads to their high transmission through surface defects or potential barriers. Quantum corrals, previously elaborated on metal surfaces, can act as nanometer-sized electronic resonators to trap Schrödinger electrons by quantum confinement. It is thus intriguing, concerning their peculiar nature, to put the Dirac electrons of TSS to the test in similar circumstances. Here, we report the behaviors of TSS in a triangular quantum corral (TQC) fabricated by epitaxially growing Bi bilayer nanostructures on the surfaces of Bi2Te3 films. Unlike a circular corral, the TQC is supposed to be totally transparent for DFs. By mapping the electronic structure of TSS inside TQCs through a low-temperature scanning tunneling microscope in the real space, both the trapping and de-trapping behaviors of the TSS electrons are observed. The selection rules are found to be governed by the geometry and spin texture of the constant energy contour of TSS upon the strong hexagonal warping in Bi2Te3. Careful analysis of the quantum interference patterns of quasi-bound states yields the corresponding wave vectors of trapped TSS, through which two trapping mechanisms favoring momenta in different directions are uncovered. Our work indicates the extended nature of TSS and elucidates the selection rules of the trapping of TSS in the presence of a complicated surface state structure, giving insights into the effective engineering of DFs in TIs.

cond-mat.mes-hall↗

arXiv2021

Long-Range Superconducting Proximity Effect in Nickel Nanowires

When a ferromagnet is placed in contact with a superconductor, owing to incompatible spin order, the Cooper pairs from the superconductor cannot survive more than one or two nanometers inside the ferromagnet. This is confirmed in the measurements of ferromagnetic nickel (Ni) nanowires contacted by superconducting niobium (Nb) leads. However, when a 3 nm thick copper oxide (CuO) buffer layer made by exposing an evaporated or a sputtered 3 nm Cu film to air, is inserted between the Nb electrodes and the Ni wire, the spatial extent of the superconducting proximity range is dramatically increased from 2 to a few tens of nanometers. Scanning transmission electron microscope study confirms the formation of a 3 nm thick CuO layer when an evaporated Cu film is exposed to air. Magnetization measurements of such a 3 nm CuO film on a SiO2/Si substrate and on Nb/SiO2/Si show clear evidence of ferromagnetism. One way to understand the long-range proximity effect in the Ni nanowire is that the CuO buffer layer with ferromagnetism facilitates the conversion of singlet superconductivity in Nb into triplet supercurrent along the Ni nanowires.

cond-mat.supr-con↗

arXiv2021

Absence of in-gap modes in charge density wave edge dislocations of the Weyl semimetal (TaSe$_4$)$_2$I

Axion electrodynamics in condensed matter could emerge from the formation of charge density waves (CDWs) in Weyl semimetals. (TaSe$_4$)$_2$I was proposed to be the first material platform for realizing axionic CDW that may host topological defects with one-dimensional in-gap modes. The real-space modulation of the CDW phase and the existence of in-gap modes remain elusive. Here, we present a comprehensive scanning tunneling microscopic and spectroscopic study of a CDW on a (TaSe$_4$)$_2$I (110) surface. The tunneling spectroscopic measurements reveal a CDW gap of $\sim 200$ meV, in good agreement with prior studies, while the spectroscopy of CDW edge dislocation shows no indication of in-gap states. The bias-dependent scanning tunneling microscopy images indicate that the CDW in(TaSe$_4$)$_2$I is dominated by a large periodic lattice distortion instead of charge modulation, suggesting a non-Peierls mechanism of the CDW instability.

cond-mat.str-el↗

arXiv2021

Zero Magnetic Field Plateau Phase Transition in Higher Chern Number Quantum Anomalous Hall Insulators

The plateau-to-plateau transition in quantum Hall effect under high magnetic fields is a celebrated quantum phase transition between two topological states through either sweeping the magnetic field or tuning the carrier density. The recent realization of the quantum anomalous Hall (QAH) insulators with tunable Chern numbers introduces the channel degree of freedom to the dissipation-free chiral edge transport and makes the study of the quantum phase transition between two topological states under zero magnetic field possible. Here, we synthesized the magnetic topological insulator (TI)/TI penta-layer heterostructures with different Cr doping concentrations in the middle magnetic TI layers using molecular beam epitaxy (MBE). By performing transport measurements, we found a zero magnetic field quantum phase transition between the C = 1 and C = 2 QAH states. In tuning the transition, the Hall resistance monotonically decreases from h/e2 to h/2e2, concurrently, the longitudinal resistance exhibits a maximum at the critical point. Our results show that the ratio between the Hall resistance and the longitudinal resistance is greater than 1 at the critical point, which indicates that the original chiral edge channel from the C = 1 QAH state coexists with the dissipative bulk conduction channels. Subsequently, these bulk conduction channels appear to self-organize and form the second chiral edge channel in completing the plateau phase transition. Our study will motivate further investigations of this novel Chern number change-induced quantum phase transition and advance the development of the QAH chiral edge current-based electronic and spintronic devices.

cond-mat.mes-hall↗

arXiv2021

Electric control of a canted-antiferromagnetic Chern insulator

The interplay between band topology and magnetism can give rise to exotic states of matter. For example, magnetically doped topological insulators can realize a Chern insulator that exhibits quantized Hall resistance at zero magnetic field. While prior works have focused on ferromagnetic systems, little is known about band topology and its manipulation in antiferromagnets. Here, we report that MnBi$_2$Te$_4$ is a rare platform for realizing a canted-antiferromagnetic (cAFM) Chern insulator with electrical control. We show that the Chern insulator state with Chern number $C = 1$ appears as soon as the AFM to canted-AFM phase transition happens. The Chern insulator state is further confirmed by observing the unusual transition of the $C = 1$ state in the cAFM phase to the $C = 2$ orbital quantum Hall states in the magnetic field induced ferromagnetic phase. Near the cAFM-AFM phase boundary, we show that the Chern number can be toggled on and off by applying an electric field alone. We attribute this switching effect to the electrical field tuning of the exchange gap alignment between the top and bottom surfaces. Our work paves the way for future studies on topological cAFM spintronics and facilitates the development of proof-of-concept Chern insulator devices.

cond-mat.mes-hall↗

arXiv2021

Even-Odd Layer-Dependent Anomalous Hall Effect in Topological Magnet MnBi2Te4 Thin Films

A central theme in condensed matter physics is to create and understand the exotic states of matter by incorporating magnetism into topological materials. One prime example is the quantum anomalous Hall (QAH) state. Recently, MnBi2Te4 has been demonstrated to be an intrinsic magnetic topological insulator and the QAH effect was observed in exfoliated MnBi2Te4 flakes. Here, we used molecular beam epitaxy (MBE) to grow MnBi2Te4 films with thickness down to 1 septuple layer (SL) and performed thickness-dependent transport measurements. We observed a non-square hysteresis loop in the antiferromagnetic state for films with thickness greater than 2 SL. The hysteresis loop can be separated into two AH components. Through careful analysis, we demonstrated that one AH component with the larger coercive field is from the dominant MnBi2Te4 phase, while the other AH component with the smaller coercive field is from the minor Mn-doped Bi2Te3 phase in the samples. The extracted AH component of the MnBi2Te4 phase shows a clear even-odd layer-dependent behavior, a signature of antiferromagnetic thin films. Our studies reveal insights on how to optimize the MBE growth conditions to improve the quality of MnBi2Te4 films, in which the QAH and other exotic states are predicted.

cond-mat.mtrl-sci↗

arXiv2021

Mapping the phase diagram of the quantum anomalous Hall and topological Hall effects in a dual-gated magnetic topological insulator heterostructure

We use magnetotransport in dual-gated magnetic topological insulator heterostructures to map out a phase diagram of the topological Hall and quantum anomalous Hall effects as a function of the chemical potential (primarily determined by the back gate voltage) and the asymmetric potential (primarily determined by the top gate voltage). A theoretical model that includes both surface states and valence band quantum well states allows the evaluation of the variation of the Dzyaloshinskii-Moriya interaction and carrier density with gate voltages. The qualitative agreement between experiment and theory provides strong evidence for the existence of a topological Hall effect in the system studied, opening up a new route for understanding and manipulating chiral magnetic spin textures in real space.

cond-mat.mes-hall↗

arXiv2021

Large Gap Quantum Anomalous Hall Effect in a Type-I Heterostructure Between a Magnetically Doped Topological Insulator and Antiferromagnetic Insulator

Heterostructures between topological insulators (TI) and magnetic insulators represent a pathway to realize the quantum anomalous Hall effect (QAHE). Using density functional theory based systematic screening and investigation of thermodynamic, magnetic and topological properties of heterostructures, we demonstrate that forming a type-I heterostructure between a wide gap antiferromagnetic insulator Cr$_2$O$_3$ and a TI-film, such as Sb$_2$Te$_3$, can lead to pinning of the Fermi-level at the center of the gap, even when magnetically doped. Cr-doping in the heterostructure increases the gap to $\sim$ 64.5 meV, with a large Zeeman energy from the interfacial Cr dopants, thus overcoming potential metallicity due to band bending effects. By fitting the band-structure around the Fermi-level to a 4-band k.p model Hamiltonian, we show that Cr doped Sb$_2$Te$_3$/Cr$_2$O$_3$ is a Chern insulator with a Chern number C = -1. Transport calculations further show chiral edge-modes localized at the top/bottom of the TI-film to be the dominant current carriers in the material. Our predictions of a large interfacial magnetism due to Cr-dopants, that coupled antiferromagnetically to the AFM substrate is confirmed by our polarised neutron reflectometry measurements on MBE grown Cr doped Sb$_2$Te$_3$/Cr$_2$O$_3$ heterostructures, and is consistent with a positive exchange bias measured in such systems recently. Consequently, Cr doped Sb$_2$Te$_3$/Cr$_2$O$_3$ heterostructure represents a promising platform for the development of functional topological magnetic devices, with high tunability.

cond-mat.mtrl-sci↗

arXiv2021

Local manifestations of thickness dependent topology and axion edge state in topological magnet MnBi$_2$Te$_4$

The interplay of non-trivial band topology and magnetism gives rise to a series of exotic quantum phenomena, such as the emergent quantum anomalous Hall (QAH) effect and topological magnetoelectric effect. Many of these quantum phenomena have local manifestations when the global symmetry is broken. Here, we report local signatures of the thickness dependent topology in intrinsic magnetic topological insulator MnBi$_2$Te$_4$(MBT), using scanning tunneling microscopy and spectroscopy on molecular beam epitaxy grown MBT thin films. A thickness-dependent band gap with an oscillatory feature is revealed, which we reproduce with theoretical calculations. Our theoretical results indicate a topological quantum phase transition beyond a film thickness of one monolayer, with alternating QAH and axion insulating states for even and odd layers, respectively. At an even-odd layer step, a localized gapped electronic state is observed, in agreement with an axion insulator edge state that results from a phase transition across the step. The demonstration of thickness-dependent topological properties highlights the role of nanoscale control over novel quantum states, reinforcing the necessity of thin film technology in quantum information science applications.

cond-mat.mes-hall↗

arXiv2020

Surface Charge Induced Dirac Band Splitting in a Charge Density Wave Material (TaSe4)2I

(TaSe4)2I, a quasi-one-dimensional (1D) crystal, shows a characteristic temperature-driven metal-insulator phase transition. Above the charge density wave (CDW) temperature Tc, (TaSe4)2I has been predicted to harbor a Weyl semimetal phase. Below Tc, it becomes an axion insulator. Here, we performed angle-resolved photoemission spectroscopy (ARPES) measurements on the (110) surface of (TaSe4)2I and observed two sets of Dirac-like energy bands in the first Brillion zone, which agree well with our first-principles calculations. Moreover, we found that each Dirac band exhibits an energy splitting of hundreds of meV under certain circumstances. In combination with core level measurements, our theoretical analysis showed that this Dirac band splitting is a result of surface charge polarization due to the loss of surface iodine atoms. Our findings here shed new light on the interplay between band topology and CDW order in Peierls compounds and will motivate more studies on topological properties of strongly correlated quasi-1D materials.

cond-mat.str-el↗

arXiv2020

Interface-Induced Sign Reversal of the Anomalous Hall Effect in Magnetic Topological Insulator Heterostructures

The Berry phase picture provides important insights into the electronic properties of condensed matter systems. The intrinsic anomalous Hall (AH) effect can be understood as a consequence of non-zero Berry curvature in momentum space. The realization of the quantum anomalous Hall effect provided conclusive evidence for the intrinsic mechanism of the AH effect in magnetic topological insulators (TIs). Here we fabricated magnetic TI/TI heterostructures and found both the magnitude and sign of the AH effect in the magnetic TI layer can be altered by tuning the TI thickness and/or the electric gate voltage. The sign change of the AH effect with increasing TI thickness is attributed to the charge transfer across the TI and magnetic TI layers, consistent with first-principles calculations. By fabricating the magnetic TI/TI/magnetic TI sandwich heterostructures with different dopants, we created an artificial topological Hall (TH) effect-like feature in Hall traces. This artificial TH effect is induced by the superposition of two AH effects with opposite signs instead of the formation of chiral spin textures in the samples. Our study provides a new route to engineer the Berry curvature in magnetic topological materials that may lead to potential technological applications.

cond-mat.mes-hall↗