arXiv subjects

Cyril Petit

Publications and source records attributed to Cyril Petit.

10 recordsLinked to original sources

arXiv2026

Joint optical-digital design strategy for adaptive optics systems: application to wavelength selection for satellite imaging

Adaptive optics can be used to mitigate the effects of atmospheric turbulence on imaging systems, but the correction is only partial, and deconvolution is often required to improve the resolution. This results in entire optical/digital systems, which are traditionally designed sequentially, i.e. , the adaptive optics system is optimised first, and the restoration algorithms are designed a second time. Studies on optical/digital systems have shown that jointly optimizing the whole system is a better alternative. We propose to extend these co-design strategies to the design of an adaptive optics-assisted imaging system. We derive a simple criterion that takes into account the source properties and the entire optical/ digital system performance. To illustrate its interest, we use it to optimize the wavelength distribution between the wavefront sensor and the imaging camera. In addition, we explore the potential of using multiple imaging channels operating at different wavelengths as a means of making an imaging system robust to turbulence strength and source magnitude variations. Later, any parameter of the optical/digital system, if not the entire system itself, could be optimized this way.

astro-ph.IM↗

arXiv2020

CHARA Array adaptive optics: complex operational software and performance

The CHARA Array is the longest baseline optical interferometer in the world. Operated with natural seeing, it has delivered landmark sub-milliarcsecond results in the areas of stellar imaging, binaries, and stellar diameters. However, to achieve ambitious observations of faint targets such as young stellar objects and active galactic nuclei, higher sensitivity is required. For that purpose, adaptive optics are developed to correct atmospheric turbulence and non-common path aberrations between each telescope and the beam combiner lab. This paper describes the AO software and its integration into the CHARA system. We also report initial on-sky tests that demonstrate an increase of scientific throughput by sensitivity gain and by extending useful observing time in worse seeing conditions. Our 6 telescopes and 12 AO systems with tens of critical alignments and control loops pose challenges in operation. We describe our methods enabling a single scientist to operate the entire system.

astro-ph.IM↗

arXiv2020

Super-resolution in vivo retinal imaging using structured illumination ophthalmoscopy

Structured illumination microscopy (SIM) is one of the most versatile super-resolution techniques. Yet, its application to live imaging has been so far mainly limited to fluorescent and stationary specimens. Here, we present advancements in SIM to jointly tackle all the challenges of imaging living samples, i.e., obtaining super-resolution over an undistorted wide-field while dealing with sample motion, scattering, sample-induced optical aberrations and low signal-to-noise ratio. By using adaptive optics to compensate for optical aberrations and a reconstruction algorithm tailored for a moving and thick tissue, we successfully applied SIM to in vivo retinal imaging and demonstrated structured illumination ophthalmoscopy for high contrast super-resolution in vivo imaging of the human retina.

physics.med-ph↗

arXiv2020

Design of the HARMONI Pyramid WFS module

Current designs for all three extremely large telescopes show the overwhelming adoption of the pyramid wavefront sensor (P-WFS) as the WFS of choice for adaptive optics (AO) systems sensing on natural guide stars (NGS) or extended objects. The key advantages of the P-WFS over the Shack-Hartmann are known and are mainly provided by the improved sensitivity (fainter NGS) and reduced sensitivity to spatial aliasing. However, robustness and tolerances of the P-WFS for the ELTs are not currently well understood. In this paper, we present simulation results for the single-conjugate AO mode of HARMONI, a visible and near-infrared integral field spectrograph for the European Extremely Large Telescope. We first explore the wavefront sensing issues related to the telescope itself; namely the island effect (i.e. differential piston) and M1 segments phasing errors. We present mitigation strategies to the island effect and their performance. We then focus on some performance optimisation aspects of the AO design to explore the impact of the RTC latency and the optical gain issues, which will in particular affect the high-contrast mode of HARMONI. Finally, we investigate the influence of the quality of glass pyramid prism itself, and of optical aberrations on the final AO performance. By relaxing the tolerances on the fabrication of the prism, we are able to reduce hardware costs and simplify integration. We show the importance of calibration (i.e. updating the control matrix) to capture any displacement of the telescope pupil and rotation of the support structure for M4. We also show the importance of the number of pixels used for wavefront sensing to relax tolerances of the pyramid prism. Finally, we present a detailed optical design of the pyramid prism, central element of the P-WFS.

astro-ph.IM↗

arXiv2019

First resolved observations of a highly asymmetric debris disc around HD 160305 with VLT/SPHERE

Context. Direct imaging of debris discs gives important information about their nature, their global morphology, and allows us to identify specific structures possibly in connection with the presence of gravitational perturbers. It is the most straightforward technique to observe planetary systems as a whole. Aims. We present the first resolved images of the debris disc around the young F-type star HD 160305, detected in scattered light using the VLT/SPHERE instrument in the near infrared. Methods. We used a post-processing method based on angular differential imaging and synthetic images of debris discs produced with a disc modelling code (GRaTer) to constrain the main characteristics of the disc around HD 160305. All of the point sources in the field of the IRDIS camera were analysed with an astrometric tool to determine whether they are bound objects or background stars. Results. We detect a very inclined (~ 82°) ring-like debris disc located at a stellocentric distance of about 86au (deprojected width ~27 au). The disc displays a brightness asymmetry between the two sides of the major axis, as can be expected from scattering properties of dust grains. We derive an anisotropic scattering factor g>0.5. A second right-left asymmetry is also observed with respect to the minor axis. We measure a surface brightness ratio of 0.73 $\pm$ 0.18 between the bright and the faint sides. Because of the low signal-to-noise ratio (S/N) of the images we cannot easily discriminate between several possible explanations for this left-right asymmetry, such as perturbations by an unseen planet, the aftermath of the breakup of a massive planetesimal, or the pericenter glow effect due to an eccentric ring. Two epochs of observations allow us to reject the companionship hypothesis for the 15 point sources present in the field.

astro-ph.EP↗

arXiv2019

Physics-based model of the adaptive-optics corrected point-spread-function

Context. Adaptive optics (AO) systems greatly increase the resolution of large telescopes, but produce complex point spread function (PSF) shapes, varying in time and across the field of view. This PSF must be accurately known since it provides crucial information about optical systems for design, characterisation, diagnostics and image post processing. Aims. We develop here a model of the AO long exposure PSF, adapted to various seeing conditions and any AO system. This model is made to match accurately both the core of the PSF and its turbulent halo. Methods. The PSF model we develop is based on a parsimonious parameterization of the phase power spectral density with only five parameters to describe circularly symmetric PSFs and seven parameters for asymmetrical ones. Moreover, one of the parameters is directly the Fried parameter r0 of the turbulence s strength. This physical parameter is an asset in the PSF model since it can be correlated with external measurements of the r0, such as phase slopes from the AO real time computer (RTC) or site seeing monitoring. Results. We fit our model against endtoend simulated PSFs using OOMAO tool, and against on sky PSFs from the SPHERE ZIMPOL imager and the MUSE integral field spectrometer working in AO narrowfield mode. Our model matches the shape of the AO PSF both in the core and the halo, with a sub 1 percent relative error for simulated and experimental data. We also show that we retrieve the r0 parameter with subcentimeter precision on simulated data. For ZIMPOL data, we show a correlation of 97 percent between our r0 estimation and the RTC estimation. Finally, MUSE allows us to test the spectral dependency of the fitted r0 parameter. It follows the theoretical $λ^{6/5}$ evolution with a standard deviation of 0.3 cm. Evolution of other PSF parameters, such as residual phase variance or aliasing, is also discussed.

astro-ph.IM↗

arXiv2018

Sensing and control of segmented mirrors with a pyramid wavefront sensor in the presence of spiders

The segmentation of the telescope pupil (by spiders & the segmented M4) create areas of phase isolated by the width of the spiders on the wavefront sensor (WFS), breaking the spatial continuity of the wavefront. The poor sensitivity of the Pyramid WFS (PWFS) to differential piston leads to badly seen and therefore uncontrollable differential pistons. In close loop operation, differential pistons between segments will settle around integer values of the average sensing wavelength. The differential pistons typically range from one to ten times the sensing wavelength and vary rapidly over time, leading to extremely poor performance. In addition, aberrations created by atmospheric turbulence will contain large amounts of differential piston between the segments. Removing piston contribution over each of the DM segments leads to poor performance. In an attempt to reduce the impact of unwanted differential pistons that are injected by the AO correction, we compare three different approaches. We first limit ourselves to only use the information measured by the PWFS, in particular by reducing the modulation. We show that using this information sensibly is important but will not be sufficient. We discuss possible ways of improvement by using prior information. A second approach is based on phase closure of the DM commands and assumes the continuity of the correction wavefront over the entire unsegmented pupil. The last approach is based on the pair-wise slaving of edge actuators and shows the best results. We compare the performance of these methods using realistic end-to-end simulations. We find that pair-wise slaving leads to a small increase of the total wavefront error, only adding between 20-45 nm RMS in quadrature for seeing conditions between 0.45-0.85 arcsec. Finally, we discuss the possibility of combining the different proposed solutions to increase robustness.

astro-ph.IM↗

arXiv2016

Natural guide-star processing for wide-field laser-assisted AO systems

Sky-coverage in laser-assisted AO observations largely depends on the system's capability to guide on the faintest natural guide-stars possible. Here we give an up-to-date status of our natural guide-star processing tailored to the European-ELT's visible and near-infrared (0.47 to 2.45 μm) integral field spectrograph - Harmoni. We tour the processing of both the isoplanatic and anisoplanatic tilt modes using the spatio-angular approach whereby the wave-front is estimated directly in the pupil plane avoiding a cumbersome explicit layered estimation on the 35-layer profiles we're currently using. Taking the case of Harmoni, we cover the choice of wave-front sensors, the number and field location of guide-stars, the optimised algorithms to beat down angular anisoplanatism and the performance obtained with different temporal controllers under split high-order/low-order tomography or joint tomography. We consider both atmospheric and far greater telescope wind buffeting disturbances. In addition we provide the sky-coverage estimates thus obtained.

astro-ph.IM↗

arXiv2014

Local ensemble transform Kalman filter, a fast non-stationary control law for adaptive optics on ELTs: theoretical aspects and first simulation results

We propose a new algorithm for an adaptive optics system control law, based on the Linear Quadratic Gaussian approach and a Kalman Filter adaptation with localizations. It allows to handle non-stationary behaviors, to obtain performance close to the optimality defined with the residual phase variance minimization criterion, and to reduce the computational burden with an intrinsically parallel implementation on the Extremely Large Telescopes (ELTs).

astro-ph.IM↗

arXiv2014

Local Ensemble Transform Kalman Filter: a non-stationary control law for complex adaptive optics systems on ELTs

We propose a new algorithm for an adaptive optics system control law which allows to reduce the computational burden in the case of an Extremely Large Telescope (ELT) and to deal with non-stationary behaviors of the turbulence. This approach, using Ensemble Transform Kalman Filter and localizations by domain decomposition is called the local ETKF: the pupil of the telescope is split up into various local domains and calculations for the update estimate of the turbulent phase on each domain are performed independently. This data assimilation scheme enables parallel computation of markedly less data during this update step. This adapts the Kalman Filter to large scale systems with a non-stationary turbulence model when the explicit storage and manipulation of extremely large covariance matrices are impossible. First simulation results are given in order to assess the theoretical analysis and to demonstrate the potentiality of this new control law for complex adaptive optics systems on ELTs.

astro-ph.IM↗