arXiv subjects

Cyril Touzé

Publications and source records attributed to Cyril Touzé.

16 recordsLinked to original sources

arXiv2026

On the validity limits of the parametrisation method for invariant manifolds: an assessment of practical criteria for vibrating systems

The parametrisation method for invariant manifolds is a powerful technique for deriving reduced-order models in the context of nonlinear vibrating systems, allowing accurate computations of nonlinear normal modes. Thanks to arbitrary order asymptotic expansions, converged results are within reach and directly applicable to finite element structures. However, since it relies on a local theory and asymptotic expansions, the results are only valid up to a given amplitude, which defines the convergence radius of the approximation. The aim of this contribution is to investigate the validity limits of the approach and review the existing error estimates, with the concrete objective of proposing a practical approach to estimate the validity range during the computation, thus producing safe bounds within which the reduced-order model can be used. Three different criteria are assessed. The first one uses the error in the invariance equation as the distance to the fixed point increases. The second one is adapted from an upper bound criterion derived for normal form transforms and based on the potential singularities of the homological operator. The third one uses Cauchy and d'Alembert convergence rules for series. The criteria are tested on a number of different examples that are representative of the situations encountered when dealing with nonlinear vibrations. The Duffing equation serves as a first benchmark that allows considering conservative oscillations, forced systems at primary resonance, and superharmonic resonance. The investigations are then extended to a vibrating system with two degrees of freedom. Finally, the different criteria are assessed on a finite element beam structure, and guidelines are formulated to generalise their practical use and produce accurate and easy-to-use error bounds in the context of model order reduction for nonlinear vibrating structures.

math.NA↗

arXiv2025

Normal form computation of nonlinear dispersion relationship for locally resonant metamaterial

This article is devoted to the application of the parametrisation method for invariant manifold with a complex normal form style (CNF), for the derivation of high-order approximations of underdamped nonlinear dispersion relationships for periodic structures, more specifically by considering the case of a locally resonant metamaterial chain incorporating damping and various nonlinear stiffnesses. Two different strategies are proposed to solve the problem. In the first one, Bloch's assumption is first applied to the equations of motion, and then the nonlinear change of coordinates provided by the complex normal form style in the parametrisation method is applied. This direct procedure, which applies first the wave dependency to the original physical coordinates of the problem, is referred to as CNF-BP (for CNF applied with Bloch's assumption on physical coordinates). In the second strategy, the nonlinear change of coordinates provided by the parametrisation method, which relates the physical coordinates to the so-called normal coordinates, is first applied. Then the periodic assumption is used, thus imposing a Bloch wave ansatz on the normal coordinates. This method will be referred to as CNF-PN (for CNF with a periodic assumption on normal coordinates). In the conservative case, the CNF-PN strategy exhibits superior capability in capturing complex wave propagation phenomena, whereas the CNF-BP strategy encounters limitations in handling non-fundamental harmonics and the nonlinear interactions between host oscillators. For underdamped systems, the CNF-PN is rigorously validated and systematically compared against numerical techniques, a classical analytical perturbation technique (the method of multiple scales), and direct numerical time integration of annular chain structures.

physics.optics↗

arXiv2025

Reduced order modelling of Hopf bifurcations for the Navier-Stokes equations through invariant manifolds

This work introduces a parametric simulation-free reduced order model for incompressible flows undergoing a Hopf bifurcation, leveraging the parametrisation method for invariant manifolds. Unlike data-driven approaches, this method operates directly on the governing equations, eliminating the need for full-order simulations. The proposed model is computed at a single value of the bifurcation parameter yet remains valid over a range of values. The approach systematically constructs an invariant manifold and embedded dynamics, providing an accurate and efficient reduction of the original system. The ability to capture pre-critical steady states, the bifurcation point, and post-critical limit cycle oscillations is demonstrated by a strong agreement between the reduced order model and full order simulations, while achieving significant computational speed-up.

cs.CE↗

arXiv2024

Reduced-order modelling of parameter-dependent systems with invariant manifolds: application to Hopf bifurcations in follower force problems

The direct parametrisation method for invariant manifolds is adjusted to consider a varying parameter. More specifically, the case of systems experiencing a Hopf bifurcation in the parameter range of interest are investigated, and the ability to predict the amplitudes of the limit cycle oscillations after the bifurcation is demonstrated. The cases of the Ziegler pendulum and Beck's column, both of which have a follower force, are considered for applications. By comparison with the eigenvalue trajectories in the conservative case, it is advocated that using two master modes to derive the ROM, instead of only considering the unstable one, should give more accurate results. Also, in the specific case where an exceptional bifurcation point is met, a numerical strategy enforcing the presence of Jordan blocks in the Jacobian matrix during the procedure, is devised. The ROMs are constructed for the Ziegler pendulum having two and three degrees of freedom, and then Beck's column is investigated, where a finite element procedure is used to space discretize the problem. The numerical results show the ability of the ROMs to correctly predict the amplitude of the limit cycles up to a certain range, and it is shown that computing the ROM after the Hopf bifurcation gives the most satisfactory results. This feature is analyzed in terms of phase space representations, and the two proposed adjustments are shown to improve the validity range of the ROMs.

math.NA↗

arXiv2024

Direct parametrisation of invariant manifolds for non-autonomous forced systems including superharmonic resonances

The direct parametrisation method for invariant manifold is a model-order reduction technique that can be applied to nonlinear systems described by PDEs and discretised e.g. with a finite element procedure in order to derive efficient reduced-order models (ROMs). In nonlinear vibrations, it has already been applied to autonomous and non-autonomous problems to propose ROMs that can compute backbone and frequency-response curves of structures with geometric nonlinearity. While previous developments used a first-order expansion to cope with the non-autonomous term, this assumption is here relaxed by proposing a different treatment. The key idea is to enlarge the dimension of the parametrising coordinates with additional entries related to the forcing. A new algorithm is derived with this starting assumption and, as a key consequence, the resonance relationships appearing through the homological equations involve multiple occurrences of the forcing frequency, showing that with this new development, ROMs for systems exhibiting a superharmonic resonance, can be derived. The method is implemented and validated on academic test cases involving beams and arches. It is numerically demonstrated that the method generates efficient ROMs for problems involving 3:1 and 2:1 superharmonic resonances, as well as converged results for systems where the first-order truncation on the non-autonomous term showed a clear limitation.

math.NA↗

arXiv2023

Reduced order modelling of fully coupled electro-mechanical systems through invariant manifolds with applications to microstructures

This paper presents the first application of the direct parametrisation method for invariant manifolds to a fully coupled multiphysics problem involving the nonlinear vibrations of deformable structures subjected to an electrostatic field. The formulation proposed is intended for model order reduction of electrostatically actuated resonating Micro-Electro-Mechanical Systems (MEMS). The continuous problem is first rewritten in a manner that can be directly handled by the parametrisation method, which relies upon automated asymptotic expansions. A new mixed fully Lagrangian formulation is thus proposed which contains only explicit polynomial nonlinearities, which is then discretised in the framework of finite element procedures. Validation is performed on the classical parallel plate configuration, where different formulations using either the general framework, or an approximation of the electrostatic field due to the geometric configuration selected, are compared. Reduced-order models along these formulations are also compared to full-order simulations operated with a time integration approach. Numerical results show a remarkable performance both in terms of accuracy and wealth of nonlinear effects that can be accounted for. In particular, the transition from hardening to softening behaviour of the primary resonance while increasing the constant voltage component of the electric actuation, is recovered. Secondary resonances leading to superharmonic and parametric resonances are also investigated with the reduced-order model.

math.NA↗

arXiv2023

Nonlinear model order reduction of resonant piezoelectric micro-actuators: an invariant manifold approach

This paper presents a novel derivation of the direct parametrisation method for invariant manifolds able to build simulation-free reduced-order models for nonlinear piezoelectric structures, with a particular emphasis on applications to Micro-Electro-Mechanical-Systems. The constitutive model adopted accounts for the hysteretic and electrostrictive response of the piezoelectric material by resorting to the Landau-Devonshire theory of ferroelectrics. Results are validated with full-order simulations operated with a harmonic balance finite element method to highlight the reliability of the proposed reduction procedure. Numerical results show a remarkable gain in terms of computing time as a result of the dimensionality reduction process over low dimensional invariant sets. Results are also compared with experimental data to highlight the remarkable benefits of the proposed model order reduction technique.

math.NA↗

arXiv2021

High order direct parametrisation of invariant manifolds for model order reduction of finite element structures: application to large amplitude vibrations and uncovering of a folding point

This paper investigates model-order reduction methods for geometrically nonlinear structures. The parametrisation method of invariant manifolds is used and adapted to the case of mechanical systems expressed in the physical basis, so that the technique is directly applicable to problems discretised by the finite element method. Two nonlinear mappings, respectively related to displacement and velocity, are introduced, and the link between the two is made explicit at arbitrary order of expansion. The same development is performed on the reduced-order dynamics which is computed at generic order following the different styles of parametrisation. More specifically, three different styles are introduced and commented: the graph style, the complex normal form style and the real normal form style. These developments allow making better connections with earlier works using these parametrisation methods. The technique is then applied to three different examples. A clamped-clamped arch with increasing curvature is first used to show an example of a system with a softening behaviour turning to hardening at larger amplitudes, which can be replicated with a single mode reduction. Secondly, the case of a cantilever beam is investigated. It is shown that the invariant manifold of the first mode shows a folding point at large amplitudes which is not connected to an internal resonance. This exemplifies the failure of the graph style due to the folding point, whereas the normal form style is able to pass over the folding. Finally, A MEMS micromirror undergoing large rotations is used to show the importance of using high-order expansions on an industrial example.

math.NA↗

arXiv2021

Model order reduction methods for geometrically nonlinear structures: a review of nonlinear techniques

This paper aims at reviewing nonlinear methods for model order reduction of structures with geometric nonlinearity, with a special emphasis on the techniques based on invariant manifold theory. Nonlinear methods differ from linear based techniques by their use of a nonlinear mapping instead of adding new vectors to enlarge the projection basis. Invariant manifolds have been first introduced in vibration theory within the context of nonlinear normal modes (NNMs) and have been initially computed from the modal basis, using either a graph representation or a normal form approach to compute mappings and reduced dynamics. These developments are first recalled following a historical perspective, where the main applications were first oriented toward structural models that can be expressed thanks to partial differential equations (PDE). They are then replaced in the more general context of the parametrisation of invariant manifold that allows unifying the approaches. Then the specific case of structures discretized with the finite element method is addressed. Implicit condensation, giving rise to a projection onto a stress manifold, and modal derivatives, used in the framework of the quadratic manifold, are first reviewed. Finally, recent developments allowing direct computation of reduced-order models (ROMs) relying on invariant manifolds theory are detailed. Applicative examples are shown and the extension of the methods to deal with further complications are reviewed. Finally, open problems and future directions are highlighted.

math.NA↗

arXiv2021

Model Order Reduction based on Direct Normal Form: Application to Large Finite Element MEMS Structures Featuring Internal Resonance

Dimensionality reduction in mechanical vibratory systems poses challenges for distributed structures including geometric nonlinearities, mainly because of the lack of invariance of the linear subspaces. A reduction method based on direct normal form computation for large finite element (FE) models is here detailed. The main advantage resides in operating directly from the physical space, hence avoiding the computation of the complete eigenfunctions spectrum. Explicit solutions are given, thus enabling a fully non-intrusive version of the reduction method. The reduced dynamics is obtained from the normal form of the geometrically nonlinear mechanical problem, free of non-resonant monomials, and truncated to the selected master coordinates, thus making a direct link with the parametrisation of invariant manifolds. The method is fully expressed with a complex-valued formalism by detailing the homological equations in a systematic manner, and the link with real-valued expressions is established. A special emphasis is put on the treatment of second-order internal resonances and the specific case of a 1:2 resonance is made explicit. Finally, applications to large-scale models of Micro-Electro-Mechanical structures featuring 1:2 and 1:3 resonances are reported, along with considerations on computational efficiency.

math.NA↗

arXiv2020

Direct computation of nonlinear mapping via normal form for reduced-order models of finite element nonlinear structures

The direct computation of the third-order normal form for a geometrically nonlinear structure discretised with the finite element (FE) method, is detailed. The procedure allows to define a nonlinear mapping in order to derive accurate reduced-order models (ROM) relying on invariant manifold theory. The proposed reduction strategy is direct and simulation free, in the sense that it allows to pass from physical coordinates (FE nodes) to normal coordinates, describing the dynamics in an invariant-based span of the phase space. The number of master modes for the ROM is not a priori limited since a complete change of coordinate is proposed. The underlying theory ensures the quality of the predictions thanks to the invariance property of the reduced subspace, together with their curvatures in phase space that accounts for the nonresonant nonlinear couplings. The method is applied to a beam discretised with 3D elements and shows its ability in recovering internal resonance at high energy. Then a fan blade model is investigated and the correct prediction given by the ROMs are assessed and discussed. A method is proposed to approximate an aggregate value for the damping, that takes into account the damping coefficients of all the slave modes, and also using the Rayleigh damping model as input. Frequency-response curves for the beam and the blades are then exhibited, showing the accuracy of the proposed method.

cs.CE↗

arXiv2020

Comparison of nonlinear mappings for reduced-order modelling of vibrating structures: normal form theory and quadratic manifold method with modal derivatives

The objective of this contribution is to compare two methods proposed recently in order to build efficient reduced-order models for geometrically nonlinear structures. The first method relies on the normal form theory that allows one to obtain a nonlinear change of coordinates for expressing the reduced-order dynamics in an invariant-based span of the phase space. The second method is the modal derivative (MD) approach, and more specifically the quadratic manifold defined in order to derive a second-order nonlinear change of coordinates. Both methods share a common point of view, willing to introduce a nonlinear mapping to better define a reduced order model that could take more properly into account the nonlinear restoring forces. However the calculation methods are different and the quadratic manifold approach has not the invariance property embedded in its definition. Modal derivatives and static modal derivatives are investigated, and their distinctive features in the treatment of the quadratic nonlinearity is underlined. Assuming a slow/fast decomposition allows understanding how the three methods tend to share equivalent properties. While they give proper estimations for flat symmetric structures having a specific shape of nonlinearities and a clear slow/fast decomposition between flexural and in-plane modes, the treatment of the quadratic nonlinearity makes the predictions different in the case of curved structures such as arches and shells. In the more general case, normal form approach appears preferable since it allows correct predictions of a number of important nonlinear features, including for example the hardening/softening behaviour, whatever the relationships between slave and master coordinates are.

math.NA↗

arXiv2020

Non-intrusive reduced order modelling for the dynamics of geometrically nonlinear flat structures using three-dimensional finite elements

Non-intrusive methods have been used since two decades to derive reduced-order models for geometrically nonlinear structures, with a particular emphasis on the so-called STiffness Evaluation Procedure (STEP), relying on the static application of prescribed displacements in a finite-element context. We show that a particularly slow convergence of the modal expansion is observed when applying the method with 3D elements, because of nonlinear couplings occurring with very high frequency modes involving 3D thickness deformations. Focusing on the case of flat structures, we first show by computing all the modes of the structure that a converged solution can be exhibited by using either static condensation or normal form theory. We then show that static modal derivatives provide the same solution with fewer calculations. Finally, we propose a modified STEP, where the prescribed displacements are imposed solely on specific degrees of freedom of the structure, and show that this adjustment also provides efficiently a converged solution.

cs.CE↗

arXiv2017

Wave turbulence in vibrating plates : the effect of damping

The effect of damping in the wave turbulence regime for thin vibrating plates is studied. An experimental method, allowing measurements of dissipation in the system at all scales, is first introduced. Practical experimental devices for increasing the dissipation are used. The main observable consequence of increasing the damping is a significant modification in the slope of the power spectral density, so that the observed power laws are not in a pure inertial regime. However, the system still displays a turbulent behavior with a cut-off frequency that is determined by the injected power which does not depend on damping. By using the measured damping power-law in numerical simulations, similar conclusions are drawn out.

nlin.CD↗

arXiv2008

Observation of wave turbulence in vibrating plates

The nonlinear interaction of waves in a driven medium may lead to wave turbulence, a state such that energy is transferred from large to small lengthscales. Here, wave turbulence is observed in experiments on a vibrating plate. The frequency power spectra of the normal velocity of the plate may be rescaled on a single curve, with power-law behaviors that are incompatible with the weak turbulence theory of D{ü}ring et al. [Phys. Rev. Lett. 97, 025503 (2006)]. Alternative scenarios are suggested to account for this discrepancy -- in particular the occurrence of wave breaking at high frequencies. Finally, the statistics of velocity increments do not display an intermittent behavior.

nlin.CD↗

arXiv2008

Statistics of power injection in a plate set into chaotic vibration

A vibrating plate is set into a chaotic state of wave turbulence by either a periodic or a random local forcing. Correlations between the forcing and the local velocity response of the plate at the forcing point are studied. Statistical models with fairly good agreement with the experiments are proposed for each forcing. Both distributions of injected power have a logarithmic cusp for zero power, while the tails are Gaussian for the periodic driving and exponential for the random one. The distributions of injected work over long time intervals are investigated in the framework of the fluctuation theorem, also known as the Gallavotti-Cohen theorem. It appears that the conclusions of the theorem are verified only for the periodic, deterministic forcing. Using independent estimates of the phase space contraction, this result is discussed in the light of available theoretical framework.

cond-mat.stat-mech↗