arXiv subjects

D. A. Caldwell

Publications and source records attributed to D. A. Caldwell.

26 records · Page 2Linked to original sources

arXiv2012

Atmospheric parameters of 82 red giants in the Kepler field

Context: Accurate fundamental parameters of stars are essential for the asteroseismic analysis of data from the NASA Kepler mission. Aims: We aim at determining accurate atmospheric parameters and the abundance pattern for a sample of 82 red giants that are targets for the Kepler mission. Methods: We have used high-resolution, high signal-to-noise spectra from three different spectrographs. We used the iterative spectral synthesis method VWA to derive the fundamental parameters from carefully selected high-quality iron lines. After determination of the fundamental parameters, abundances of 13 elements were measured using equivalent widths of the spectral lines. Results: We identify discrepancies in log g and [Fe/H], compared to the parameters based on photometric indices in the Kepler Input Catalogue (larger than 2.0 dex for log g and [Fe/H] for individual stars). The Teff found from spectroscopy and photometry shows good agreement within the uncertainties. We find good agreement between the spectroscopic log g and the log g derived from asteroseismology. Also, we see indications of a potential metallicity effect on the stellar oscillations. Conclusions: We have determined the fundamental parameters and element abundances of 82 red giants. The large discrepancies between the spectroscopic log g and [Fe/H] and values in the Kepler Input Catalogue emphasize the need for further detailed spectroscopic follow-up of the Kepler targets in order to produce reliable results from the asteroseismic analysis.

astro-ph.SR↗

arXiv2011

Constructing a one-solar-mass evolutionary sequence using asteroseismic data from \textit{Kepler}

Asteroseismology of solar-type stars has entered a new era of large surveys with the success of the NASA \textit{Kepler} mission, which is providing exquisite data on oscillations of stars across the Hertzprung-Russell (HR) diagram. From the time-series photometry, the two seismic parameters that can be most readily extracted are the large frequency separation ($Δν$) and the frequency of maximum oscillation power ($ν_\mathrm{max}$). After the survey phase, these quantities are available for hundreds of solar-type stars. By scaling from solar values, we use these two asteroseismic observables to identify for the first time an evolutionary sequence of 1-M$_\odot$ field stars, without the need for further information from stellar models. Comparison of our determinations with the few available spectroscopic results shows an excellent level of agreement. We discuss the potential of the method for differential analysis throughout the main-sequence evolution, and the possibility of detecting twins of very well-known stars.

astro-ph.SR↗

arXiv2011

Global asteroseismic properties of solar-like oscillations observed by Kepler : A comparison of complementary analysis methods

We present the asteroseismic analysis of 1948 F-, G- and K-type main-sequence and subgiant stars observed by the NASA {\em Kepler Mission}. We detect and characterise solar-like oscillations in 642 of these stars. This represents the largest cohort of main-sequence and subgiant solar-like oscillators observed to date. The photometric observations are analysed using the methods developed by nine independent research teams. The results are combined to validate the determined global asteroseismic parameters and calculate the relative precision by which the parameters can be obtained. We correlate the relative number of detected solar-like oscillators with stellar parameters from the {\em Kepler Input Catalog} and find a deficiency for stars with effective temperatures in the range $5300 \lesssim T_\mathrm{eff} \lesssim 5700$\,K and a drop-off in detected oscillations in stars approaching the red edge of the classical instability strip. We compare the power-law relationships between the frequency of peak power, $ν_\mathrm{max}$, the mean large frequency separation, $Δν$, and the maximum mode amplitude, $A_\mathrm{max}$, and show that there are significant method-dependent differences in the results obtained. This illustrates the need for multiple complementary analysis methods to be used to assess the robustness and reproducibility of results derived from global asteroseismic parameters.

astro-ph.SR↗

arXiv2011

Kepler observations of variability in B-type stars

The analysis of the light curves of 48 B-type stars observed by Kepler is presented. Among these are 15 pulsating stars, all of which show low frequencies characteristic of SPB stars. Seven of these stars also show a few weak, isolated high frequencies and they could be considered as SPB/beta Cep hybrids. In all cases the frequency spectra are quite different from what is seen from ground-based observations. We suggest that this is because most of the low frequencies are modes of high degree which are predicted to be unstable in models of mid-B stars. We find that there are non-pulsating stars within the beta Cep and SPB instability strips. Apart from the pulsating stars, we can identify stars with frequency groupings similar to what is seen in Be stars but which are not Be stars. The origin of the groupings is not clear, but may be related to rotation. We find periodic variations in other stars which we attribute to proximity effects in binary systems or possibly rotational modulation. We find no evidence for pulsating stars between the cool edge of the SPB and the hot edge of the delta Sct instability strips. None of the stars show the broad features which can be attributed to stochastically-excited modes as recently proposed. Among our sample of B stars are two chemically peculiar stars, one of which is a HgMn star showing rotational modulation in the light curve.

astro-ph.SR↗

arXiv2010

Kepler photometry of the prototypical Blazhko star RR Lyr: An old friend seen in a new light

We present our analysis of the long cadence Kepler data for the well-studied Blazhko star RR Lyr, gathered during the first two quarters of the satellite's observations and covering a total of 127d. Besides being of great importance for our understanding of RR Lyrae stars in general, these RR Lyr data can be regarded as a case study for observations of bright stars with Kepler. Kepler can perform high-precision photometry on targets like RR Lyr, as the saturated flux is conserved to a very high degree. The Kepler data on RR Lyr are revolutionary in several respects. Even with long-cadence sampling (one measurement per 29.4 min), the unprecedented precision (< mmag) of the Kepler photometry allows the study of the star's extreme light curve variations in detail. The multiplet structures at the main frequency and its harmonics, typical for Blazhko stars, are clearly detected up to the quintuplets. For the first time, photometric data of RR Lyr reveal the presence of half-integer frequencies, linked to a period doubling effect. This phenomenon may be connected to the still unexplained Blazhko modulation. Moreover, with three observed Blazhko cycles at our disposal, we observe that there is no exact repetition in the light curve changes from one modulation cycle to the next for RR Lyr. This may be due to additional periodicities in the star, or to transient or quasi-periodic changes.

astro-ph.SR↗

arXiv2010

Pre-Spectroscopic False Positive Elimination of Kepler Planet Candidates

Ten days of commissioning data (Quarter 0) and thirty-three days of science data (Quarter 1) yield instrumental flux timeseries of ~150,000 stars that were combed for transit events, termed Threshold Crossing Events (TCE), each having a total detection statistic above 7.1-sigma. TCE light curves are modeled as star+planet systems. Those returning a companion radius smaller than 2R_J are assigned a KOI (Kepler Object of Interest) number. The raw flux, pixel flux, and flux-weighted centroids of every KOI are scrutinized to assess the likelihood of being an astrophysical false-positive versus the likelihood of a being a planetary companion. This vetting using Kepler data is referred to as data validation. Herein, we describe the data validation metrics and graphics used to identify viable planet candidates amongst the KOIs. Light curve modeling tests for a) the difference in depth of the odd- versus even-numbered transits, b) evidence of ellipsoidal variations, and c) evidence of a secondary eclipse event at phase=0.5. Flux-weighted centroids are used to test for signals correlated with transit events with a magnitude and direction indicative of a background eclipsing binary. Centroid timeseries are complimented by analysis of images taken in-transit versus out-of-transit, the difference often revealing the pixel contributing the most to the flux change during transit. Examples are shown to illustrate each test. Candidates passing data validation are submitted to ground-based observers for further false-positive elimination or confirmation/characterization.

astro-ph.EP↗

arXiv2010

Selection, Prioritization, and Characteristics of Kepler Target Stars

The Kepler Mission began its 3.5-year photometric monitoring campaign in May 2009 on a select group of approximately 150,000 stars. The stars were chosen from the ~half million in the field of view that are brighter than 16th magnitude. The selection criteria are quantitative metrics designed to optimize the scientific yield of the mission with regards to the detection of Earth-size planets in the habitable zone. This yields more than 90,000 G-type stars on or close to the Main Sequence, >20,000 of which are brighter than 14th magnitude. At the temperature extremes, the sample includes approximately 3,000 M-type dwarfs and a small sample of O and B-type MS stars <200. Small numbers of giants are included in the sample which contains ~5,000 stars with surface gravities log(g) < 3.5. We present a brief summary of the selection process and the stellar populations it yields in terms of surface gravity, effective temperature, and apparent magnitude. In addition to the primary, statistically-derived target set, several ancillary target lists were manually generated to enhance the science of the mission, examples being: known eclipsing binaries, open cluster members, and high proper-motion stars.

astro-ph.SR↗

arXiv2009

Initial Characteristics of Kepler Short Cadence Data

The Kepler Mission offers two options for observations -- either Long Cadence (LC) used for the bulk of core mission science, or Short Cadence (SC) which is used for applications such as asteroseismology of solar-like stars and transit timing measurements of exoplanets where the 1-minute sampling is critical. We discuss the characteristics of SC data obtained in the 33.5-day long Quarter 1 (Q1) observations with Kepler which completed on 15 June 2009. The truly excellent time series precisions are nearly Poisson limited at 11th magnitude providing per-point measurement errors of 200 parts-per-million per minute. For extremely saturated stars near 7th magnitude precisions of 40 ppm are reached, while for background limited measurements at 17th magnitude precisions of 7 mmag are maintained. We note the presence of two additive artifacts, one that generates regularly spaced peaks in frequency, and one that involves additive offsets in the time domain inversely proportional to stellar brightness. The difference between LC and SC sampling is illustrated for transit observations of TrES-2.

astro-ph.SR↗