arXiv subjects

D. A. Naylor

Publications and source records attributed to D. A. Naylor.

At least 19 recordsLinked to original sources

arXiv2022

Modal Simulation Framework for the Design and Verification of Future Few-Mode Far-Infrared Spectrometers

Future far-infrared space missions require highly-sensitive spectroscopy as a primary diagnostics tool. However, these systems are sensitive to straylight, due to the ultra-sensitive few-mode detectors used, which affects the measurement and calibration of the spectrum, as revealed by the Herschel mission. To ensure that the science goals of future missions are met, the complex modal behaviour has to be understood, and appropriate verification and calibration strategies must be developed. We propose a modal framework to addresses these issues, using Herschel-SPIRE as a case study, and demonstrate how the technique can be used for the design and verification of spectrometers in future far-infrared missions.

astro-ph.IM↗

arXiv2022

Modelling the Partially Coherent Behaviour of Few-Mode Far-Infrared Grating Spectrometers

Modelling ultra-low-noise far-infrared grating spectrometers has become crucial for the next generation of far-infrared space observatories. Conventional techniques are awkward to apply because of the partially coherent form of the incident spectral field, and the few-mode response of the optics and detectors. We present a modal technique for modelling the behaviour of spectrometers, which allows for the propagation and detection of partially coherent fields, and the inclusion of straylight radiated by warm internal surfaces. We illustrate the technique by modelling the behaviour of the Long Wavelength Band of the proposed SAFARI instrument on the well-studied SPICA mission.

astro-ph.IM↗

arXiv2020

The Herschel SPIRE Fourier Transform Spectrometer Spectral Feature Finder I. The Spectral Feature Finder and Catalogue

We provide a detailed description of the Herschel-SPIRE Fourier Transform Spectrometer (FTS) Spectral Feature Finder (FF). The FF is an automated process designed to extract significant spectral features from SPIRE FTS data products. Optimising the number of features found in SPIRE-FTS spectra is challenging. The wide SPIRE-FTS frequency range (447-1568 GHz) leads to many molecular species and atomic fine structure lines falling within the observed bands. As the best spectral resolution of the SPIRE-FTS is ~1.2 GHz, there can be significant line blending, depending on the source type. In order to find, both efficiently and reliably, features in spectra associated with a wide range of sources, the FF iteratively searches for peaks over a number of signal-to-noise ratio (SNR) thresholds. For each threshold, newly identified features are rigorously checked before being added to the fitting model. At the end of each iteration, the FF simultaneously fits the continuum and features found, with the resulting residual spectrum used in the next iteration. The final FF products report the frequency of the features found and the associated SNRs. Line flux determination is not included as part of the FF products, as extracting reliable line flux from SPIRE-FTS data is a complex process that requires careful evaluation and analysis of the spectra on a case-by-case basis. The FF results are 100% complete for features with SNR greater than 10 and 50-70% complete at SNR of 5. The FF code and all FF products are publicly available via the Herschel Science Archive.

astro-ph.IM↗

arXiv2018

Correcting the extended-source calibration for the Herschel-SPIRE Fourier-Transform Spectrometer

We describe an update to the Herschel-SPIRE Fourier-Transform Spectrometer (FTS) calibration for extended sources, which incorporates a correction for the frequency-dependent far-field feedhorn efficiency, $η_\mathrm{FF}$. This significant correction affects all FTS extended-source calibrated spectra in sparse or mapping mode, regardless of the spectral resolution. Line fluxes and continuum levels are underestimated by factors of 1.3-2 in the Spectrometer Long-Wavelength band (SLW, 447-1018 GHz; 671-294 $μ$m) and 1.4-1.5 in the Spectrometer Short-Wavelength band (SSW, 944-1568 GHz; 318-191 $μ$m). The correction was implemented in the FTS pipeline version 14.1 and has also been described in the SPIRE Handbook since Feb 2017. Studies based on extended-source calibrated spectra produced prior to this pipeline version should be critically reconsidered using the current products available in the Herschel Science Archive. Once the extended-source calibrated spectra are corrected for $η_\mathrm{FF}$, the synthetic photometry and the broadband intensities from SPIRE photometer maps agree within 2-4% -- similar levels to the comparison of point-source calibrated spectra and photometry from point-source calibrated maps. The two calibration schemes for the FTS are now self-consistent: the conversion between the corrected extended-source and point-source calibrated spectra can be achieved with the beam solid angle and a gain correction that accounts for the diffraction loss.

astro-ph.IM↗

arXiv2016

Calibration of Herschel SPIRE FTS observations at different spectral resolutions

The SPIRE Fourier Transform Spectrometer on board the Herschel Space Observatory had two standard spectral resolution modes for science observations: high resolution (HR) and low resolution (LR), which could also be performed in sequence (H+LR). A comparison of the HR and LR resolution spectra taken in this sequential mode, revealed a systematic discrepancy in the continuum level. Analysing the data at different stages during standard pipeline processing, demonstrates the telescope and instrument emission affect HR and H+LR observations in a systematically different way. The origin of this difference is found to lie in the variation of both the telescope and instrument response functions, while it is triggered by fast variation of the instrument temperatures. As it is not possible to trace the evolution of the response functions through auxiliary housekeeping parameters, the calibration cannot be corrected analytically. Therefore an empirical correction for LR spectra has been developed, which removes the systematic noise introduced by the variation of the response functions.

astro-ph.IM↗

arXiv2016

Three-dimensional distribution of hydrogen fluoride gas toward NGC6334 I and I(N)

Aims. We investigate the spatial distribution of a collection of absorbing gas clouds, some associated with the dense, massive star-forming core NGC6334 I, and others with diffuse foreground clouds. For the former category, we aim to study the dynamical properties of the clouds in order to assess their potential to feed the accreting protostellar cores. Methods. We use spectral imaging from the Herschel SPIRE iFTS to construct a map of HF absorption at 243 micron in a 6x3.5 arcmin region surrounding NGC6334 I and I(N). Results. The combination of new, spatially fully sampled, but spectrally unresolved mapping with a previous, single-pointing, spectrally resolved HF signature yields a 3D picture of absorbing gas clouds in the direction of NGC6334. Toward core I, the HF equivalent width matches that of the spectrally resolved observation. The distribution of HF absorption is consistent with three of the seven components being associated with this dense star-forming envelope. For two of the remaining four components, our data suggest that these clouds are spatially associated with the larger scale filamentary star-forming complex. Our data also implies a lack of gas phase HF in the envelope of core I(N). Using a simple description of adsorption onto and desorption from dust grain surfaces, we show that the overall lower temperature of the envelope of source I(N) is consistent with freeze-out of HF, while it remains in the gas phase in source I. Conclusions. We use the HF molecule as a tracer of column density in diffuse gas (n(H) ~ 10^2 - 10^3 cm^-3), and find that it may uniquely trace a relatively low density portion of the gas reservoir available for star formation that otherwise escapes detection. At higher densities prevailing in protostellar envelopes (>10^4 cm^-3), we find evidence of HF depletion from the gas phase under sufficiently cold conditions.

astro-ph.GA↗

arXiv2016

The data processing pipeline for the Herschel SPIRE Fourier Transform Spectrometer

We present the data processing pipeline to generate calibrated data products from the Spectral and Photometric Imaging Receiver (SPIRE) imaging Fourier Transform Spectrometer on the Herschel Space Observatory. The pipeline processes telemetry from SPIRE observations and produces calibrated spectra for all resolution modes. The spectrometer pipeline shares some elements with the SPIRE photometer pipeline, including the conversion of telemetry packets into data timelines and calculation of bolometer voltages. We present the following fundamental processing steps unique to the spectrometer: temporal and spatial interpolation of the scan mechanism and detector data to create interferograms; Fourier transformation; apodization; and creation of a data cube. We also describe the corrections for various instrumental effects including first- and second-level glitch identification and removal, correction of the effects due to emission from the Herschel telescope and from within the spectrometer instrument, interferogram baseline correction, temporal and spatial phase correction, non-linear response of the bolometers, and variation of instrument performance across the focal plane arrays. Astronomical calibration is based on combinations of observations of standard astronomical sources and regions of space known to contain minimal emission.

astro-ph.IM↗

arXiv2015

Systematic characterisation of the Herschel SPIRE Fourier Transform Spectrometer

A systematic programme of calibration observations was carried out to monitor the performance of the SPIRE FTS instrument on board the Herschel Space Observatory. Observations of planets (including the prime point-source calibrator, Uranus), asteroids, line sources, dark sky, and cross-calibration sources were made in order to monitor repeatability and sensitivity, and to improve FTS calibration. We present a complete analysis of the full set of calibration observations and use them to assess the performance of the FTS. Particular care is taken to understand and separate out the effect of pointing uncertainties, including the position of the internal beam steering mirror for sparse observations in the early part of the mission. The repeatability of spectral line centre positions is <5km/s, for lines with signal-to-noise ratios >40, corresponding to <0.5-2.0% of a resolution element. For spectral line flux, the repeatability is better than 6%, which improves to 1-2% for spectra corrected for pointing offsets. The continuum repeatability is 4.4% for the SLW band and 13.6% for the SSW band, which reduces to ~1% once the data have been corrected for pointing offsets. Observations of dark sky were used to assess the sensitivity and the systematic offset in the continuum, both of which were found to be consistent across the FTS detector arrays. The average point-source calibrated sensitivity for the centre detectors is 0.20 and 0.21 Jy [1 sigma; 1 hour], for SLW and SSW. The average continuum offset is 0.40 Jy for the SLW band and 0.28 Jy for the SSW band.

astro-ph.IM↗

arXiv2015

The Herschel Comprehensive (U)LIRG Emission Survey (HerCULES): CO Ladders, fine structure lines, and neutral gas cooling

(Ultra) Luminous Infrared Galaxies ((U)LIRGs) are objects characterized by their extreme infrared (8-1000 $μ$m) luminosities ($L_{LIRG}>10^{11} $L$_\odot$ and $L_{ULIRG}>10^{12}$ L$_\odot$). The Herschel Comprehensive ULIRG Emission Survey (HerCULES; PI van der Werf) presents a representative flux-limited sample of 29 (U)LIRGs that spans the full luminosity range of these objects (10$^{11}\leq L_\odot \geq10^{13}$). With the \emph{Herschel Space Observatory}, we observe [CII] 157 $μ$m, [OI] 63 $μ$m, and [OI] 145 $μ$m line emission with PACS, CO J=4-3 through J=13-12, [CI] 370 $μ$m, and [CI] 609 $μ$m with SPIRE, and low-J CO transitions with ground-based telescopes. The CO ladders of the sample are separated into three classes based on their excitation level. In 13 of the galaxies, the [OI] 63 $μ$m emission line is self absorbed. Comparing the CO excitation to the IRAS 60/100 $μ$m ratio and to far infrared luminosity, we find that the CO excitation is more correlated to the far infrared colors. We present cooling budgets for the galaxies and find fine-structure line flux deficits in the [CII], [SiII], [OI], and [CI] lines in the objects with the highest far IR fluxes, but do not observe this for CO $4\leq J_{upp}\leq13$. In order to study the heating of the molecular gas, we present a combination of three diagnostic quantities to help determine the dominant heating source. Using the CO excitation, the CO J=1-0 linewidth, and the AGN contribution, we conclude that galaxies with large CO linewidths always have high-excitation CO ladders, and often low AGN contributions, suggesting that mechanical heating is important.

astro-ph.GA↗

arXiv2014

Physical structure of the photodissociation regions in NGC 7023. Observations of gas and dust emission with Herschel

The determination of the physical conditions in molecular clouds is a key step towards our understanding of their formation and evolution of associated star formation. We investigate the density, temperature, and column density of both dust and gas in the photodissociation regions (PDRs) located at the interface between the atomic and cold molecular gas of the NGC 7023 reflection nebula. We study how young stars affect the gas and dust in their environment. Our approach combining both dust and gas delivers strong constraints on the physical conditions of the PDRs. We find dense and warm molecular gas of high column density in the PDRs.

astro-ph.GA↗

arXiv2014

Signatures of warm carbon monoxide in protoplanetary discs observed with Herschel SPIRE

Molecular gas constitutes the dominant mass component of protoplanetary discs. To date, these sources have not been studied comprehensively at the longest far-infrared and shortest submillimetre wavelengths. This paper presents Herschel SPIRE FTS spectroscopic observations toward 18 protoplanetary discs, covering the entire 450-1540 GHz (666-195 $μ$m) range at R~400-1300. The spectra reveal clear detections of the dust continuum and, in six targets, a significant amount of spectral line emission primarily attributable to $^{12}$CO rotational lines. Other targets exhibit little to no detectable spectral lines. Low signal-to-noise detections also include signatures from $^{13}$CO, [CI] and HCN. For completeness, we present upper limits of non-detected lines in all targets, including low-energy transitions of H2O and CH$^+$ molecules. The ten $^{12}$CO lines that fall within the SPIRE FTS bands trace energy levels of ~50-500 K. Combined with lower and higher energy lines from the literature, we compare the CO rotational line energy distribution with detailed physical-chemical models, for sources where these are available and published. Our 13CO line detections in the disc around Herbig Be star HD 100546 exceed, by factors of ~10-30, the values predicted by a model that matches a wealth of other observational constraints, including the SPIRE $^{12}$CO ladder. To explain the observed $^{12}$CO/$^{13}$CO ratio, it may be necessary to consider the combined effects of optical depth and isotope selective (photo)chemical processes. Considering the full sample of 18 objects, we find that the strongest line emission is observed in discs around Herbig Ae/Be stars, although not all show line emission. In addition, two of the six T Tauri objects exhibit detectable $^{12}$CO lines in the SPIRE range.

astro-ph.GA↗

arXiv2014

Star formation relations and CO SLEDs across the J-ladder and redshift

We present FIR-CO luminosity relations ($\log L_{\rm FIR} = α\log L'_{\rm CO} + β$) for the full CO rotational ladder from J=1-0 to J=13-12 for 62 local (z < 0.1) (Ultra) Luminous Infrared Galaxies (LIRGs) using data from Herschel SPIRE-FTS and ground-based telescopes. We extend our sample to high redshifts (z > 1) by including 35 (sub)-millimeter selected dusty star forming galaxies from the literature with robust CO observations. The addition of luminous starbursts at high redshifts enlarge the range of the FIR-CO luminosity relations towards the high-IR-luminosity end while also significantly increasing the small amount of mid-/high-J CO line data available prior to Herschel. This new data-set (both in terms of IR luminosity and J-ladder) reveals linear FIR-CO luminosity relations ($α\sim 1$) for J=1-0 up to J=5-4, with a nearly constant normalisation ($β\sim 2$). This is expected from the (also) linear FIR-(molecular line) relations found for the dense gas tracer lines (HCN and CS), as long as the dense gas mass fraction does not vary strongly within our (merger/starburst)-dominated sample. However from J=6-5 and up to J=13-12 we find an increasingly sub-linear slope and higher normalization constant with increasing J. We argue that these are caused by a warm (~100K) and dense ($>10^4{\rm cm^{-3}}$) gas component whose thermal state is unlikely to be maintained by star formation powered far-UV radiation fields (and thus is no longer directly tied to the star formation rate). We suggest that mechanical heating (e.g., supernova driven turbulence and shocks), and not cosmic rays, is the more likely source of energy for this component. The global CO spectral line energy distributions (SLEDs), which remain highly excited from J=6-5 up to J=13-12, are found to be a generic feature of the (U)LIRGs in our sample, and further support the presence of this gas component.

astro-ph.GA↗

arXiv2014

Calibration of the Herschel SPIRE Fourier Transform Spectrometer

The Herschel SPIRE instrument consists of an imaging photometric camera and an imaging Fourier Transform Spectrometer (FTS), both operating over a frequency range of 450-1550 GHz. In this paper, we briefly review the FTS design, operation, and data reduction, and describe in detail the approach taken to relative calibration (removal of instrument signatures) and absolute calibration against standard astronomical sources. The calibration scheme assumes a spatially extended source and uses the Herschel telescope as primary calibrator. Conversion from extended to point-source calibration is carried out using observations of the planet Uranus. The model of the telescope emission is shown to be accurate to within 6% and repeatable to better than 0.06% and, by comparison with models of Mars and Neptune, the Uranus model is shown to be accurate to within 3%. Multiple observations of a number of point-like sources show that the repeatability of the calibration is better than 1%, if the effects of the satellite absolute pointing error (APE) are corrected. The satellite APE leads to a decrement in the derived flux, which can be up to ~10% (1 sigma) at the high-frequency end of the SPIRE range in the first part of the mission, and ~4% after Herschel operational day 1011. The lower frequency range of the SPIRE band is unaffected by this pointing error due to the larger beam size. Overall, for well-pointed, point-like sources, the absolute flux calibration is better than 6%, and for extended sources where mapping is required it is better than 7%.

astro-ph.IM↗

arXiv2012

Herschel images of Fomalhaut. An extrasolar Kuiper Belt at the height of its dynamical activity

Fomalhaut is a young, nearby star that is suspected to harbor an infant planetary system, interspersed with one or more belts of dusty debris. We present far-infrared images obtained with the Herschel Space Observatory with an angular resolution between 5.7 and 36.7 arcsec at wavelengths between 70 and 500 micrometer. The images show the main debris belt in great detail. Even at high spatial resolution, the belt appears smooth. The region in between the belt and the central star is not devoid of material; thermal emission is observed here as well. Also at the location of the star, excess emission is detected. We use a dynamical model together with radiative-transfer tools to derive the parameters of the debris disk. We include detailed models of the interaction of the dust grains with radiation, for both the radiation pressure and the temperature determination. Comparing these models to the spatially resolved temperature information contained in the images allows us to place strong constraints on the presence of grains that will be blown out of the system by radiation pressure. We use this to derive the dynamical parameters of the system. The appearance of the belt points towards a remarkably active system in which dust grains are produced at a very high rate by a collisional cascade in a narrow region filled with dynamically excited planetesimals. Dust particles with sizes below the blow-out size are abundantly present. The equivalent of 2000 one-km-sized comets are destroyed every day, out of a cometary reservoir amounting to 110 Earth masses. From comparison of their scattering and thermal properties, we find evidence that the dust grains are fluffy aggregates, which indicates a cometary origin. The excess emission at the location of the star may be produced by hot dust with a range of temperatures, but may also be due to gaseous free-free emission from a stellar wind.

astro-ph.SR↗

arXiv2010

First results on Martian carbon monoxide from Herschel/HIFI observations

We report on the initial analysis of Herschel/HIFI carbon monoxide (CO) observations of the Martian atmosphere performed between 11 and 16 April 2010. We selected the (7-6) rotational transitions of the isotopes ^{13}CO at 771 GHz and C^{18}O at 768 GHz in order to retrieve the mean vertical profile of temperature and the mean volume mixing ratio of carbon monoxide. The derived temperature profile agrees within less than 5 K with general circulation model (GCM) predictions up to an altitude of 45 km, however, show about 12-15 K lower values at 60 km. The CO mixing ratio was determined as 980 \pm 150 ppm, in agreement with the 900 ppm derived from Herschel/SPIRE observations in November 2009.

astro-ph.EP↗

arXiv2010

Herschel/HIFI observations of Mars: first detection of O_2 at submillimetre wavelengths and upper limits on HCl and H_2O_2

We report on an initial analysis of Herschel/HIFI observations of hydrogen chloride (HCl), hydrogen peroxide (H_2O_2), and molecular oxygen (O_2) in the Martian atmosphere performed on 13 and 16 April 2010 (L_s ~ 77°). We derived a constant volume mixing ratio of 1400 +/- 120 ppm for O_2 and determined upper limits of 200 ppt for HCl and 2 ppb for H_2O_2. Radiative transfer model calculations indicate that the vertical profile of O_2 may not be constant. Photochemical models determine the lowest values of H_2O_2 to be around L_s ~ 75° but overestimate the volume mixing ratio compared to our measurements.

astro-ph.EP↗

arXiv2010

Water production in comet 81P/Wild 2 as determined by Herschel/HIFI

The high spectral resolution and sensitivity of Herschel/HIFI allows for the detection of multiple rotational water lines and accurate determinations of water production rates in comets. In this letter we present HIFI observations of the fundamental 110-101 (557 GHz) ortho and 111-000 (1113 GHz) para rotational transitions of water in comet 81P/Wild 2 acquired in February 2010. We mapped the extent of the water line emission with five point scans. Line profiles are computed using excitation models which include excitation by collisions with electrons and neutrals and solar infrared radiation. We derive a mean water production rate of $1.0 \times 10^{28}$ molecules s$^{-1}$ at a heliocentric distance of 1.61 AU about 20 days before perihelion, in agreement with production rates measured from the ground using observations of the 18-cm OH lines. Furthermore, we constrain the electron density profile and gas kinetic temperature, and estimate the coma expansion velocity by fitting the water line shapes.

astro-ph.EP↗

arXiv2010

The β Pictoris disk imaged by Herschel PACS and SPIRE

We obtained Herschel PACS and SPIRE images of the thermal emission of the debris disk around the A5V star β Pic. The disk is well resolved in the PACS filters at 70, 100, and 160 μm. The surface brightness profiles between 70 and 160 μm show no significant asymmetries along the disk, and are compatible with 90% of the emission between 70 and 160 μm originating in a region closer than 200 AU to the star. Although only marginally resolving the debris disk, the maps obtained in the SPIRE 250 - 500 μm filters provide full-disk photometry, completing the SED over a few octaves in wavelength that had been previously inaccessible. The small far-infrared spectral index (β = 0.34) indicates that the grain size distribution in the inner disk (<200AU) is inconsistent with a local collisional equilibrium. The size distribution is either modified by non-equilibrium effects, or exhibits a wavy pattern, caused by an under-abundance of impactors which have been removed by radiation pressure.

astro-ph.SR↗