SearcharxivSearch

arXiv subjects

D. Andrienko

Publications and source records attributed to D. Andrienko.

At least 19 recordsLinked to original sources

On the critical competition between singlet exciton decay and free charge generation in non-fullerene-based organic solar cells with low energetic offsets

In this era of non-fullerene acceptor (NFA) based organic solar cells, reducing voltage losses while maintaining high photocurrents is the holy grail of current research. Recent focus lies in understanding the manifold fundamental mechanisms in organic blends with minimal energy offsets - particularly the relationship between ionization energy offset ({\Delta}IE) and free charge generation. We quantitatively probe this relationship in multiple NFA-based blends by mixing Y5 and Y6 NFAs with PM6 of varying molecular weights, covering a 15% to 1% power conversion efficiency (PCE) range and a progression of {\Delta}IE. Spectroelectrochemistry reveals a critical {\Delta}IE of approximately 0.3 eV, below which the PCE sharply declines. Transient absorption spectroscopy consistently reveals that a smaller {\Delta}IE slows the dissociation of the NFA's local singlet exciton (LE) into free charges, albeit restorable by an electric field. Bias-dependent time delayed collection experiments quantify the free charge generation efficiency, while photoluminescence quantum efficiency measurements assess photocurrent loss from LE decay. Combined with transient photoluminescence experiments, we find that the decay of singlet excitons is the primary competition to free charge generation in low-offset NFA-based organic solar cells, with neither noticeable losses from charge-transfer (CT) decay nor evidence for LE-CT hybridization. Our experimental data align with Marcus theory calculations, supported by density functional theory simulations, for zero-field free charge generation and exciton decay efficiencies. We find that efficient photocurrent generation generally requires that the CT state is located below the LE, but that this restriction is lifted in systems with a small reorganization energy for charge transfer.

cond-mat.mtrl-sci

Chemical design rules for non-fullerene acceptors in organic solar cells

Efficiencies of organic solar cells have practically doubled since the development of non-fullerene acceptors (NFAs). However, generic chemical design rules for donor-NFA combinations are still needed. Such rules are proposed by analyzing inhomogeneous electrostatic fields at the donor-acceptor interface. It is shown that an acceptor-donor-acceptor molecular architecture, and molecular alignment parallel to the interface, results in energy level bending that destabilizes the charge transfer state, thus promoting its dissociation into free charges. By analyzing a series of PCE10:NFA solar cells, with NFAs including Y6, IEICO, and ITIC, as well as their halogenated derivatives, it is suggested that the molecular quadrupole moment of ca 75 Debye A balances the losses in the open circuit voltage and gains in charge generation efficiency.

cond-mat.mtrl-sci

Charge mobility of discotic mesophases: A multiscale quantum/classical study

A correlation is established between the molecular structure and charge mobility of discotic mesophases of hexabenzocoronene derivatives by combining electronic structure calculations, Molecular Dynamics, and kinetic Monte Carlo simulations. It is demonstrated that this multiscale approach can provide an accurate ab-initio description of charge transport in organic materials.

cond-mat.mtrl-sci

Colloidal particles at a nematic-isotropic interface: effects of confinement

When captured by a flat nematic-isotropic interface, colloidal particles can be dragged by it. As a result spatially periodic structures may appear, with the period depending on a particle mass, size, and interface velocity~\cite{west.jl:2002}. If liquid crystal is sandwiched between two substrates, the interface takes a wedge-like shape, accommodating the interface-substrate contact angle and minimizing the director distortions on its nematic side. Correspondingly, particles move along complex trajectories: they are first captured by the interface and then `glide' towards its vertex point. Our experiments quantify this scenario, and numerical minimization of the Landau-de Gennes free energy allow for a qualitative description of the interfacial structure and the drag force.

cond-mat.soft

Flow boundary conditions for chain-end adsorbing polymer blends

Using the phenol-terminated polycarbonate blend as an example, we demonstrate that the hydrodynamic boundary conditions for a flow of an adsorbing polymer melt are extremely sensitive to the structure of the epitaxial layer. Under shear, the adsorbed parts (chain ends) of the polymer melt move along the equipotential lines of the surface potential whereas the adsorbed additives serve as the surface defects. In response to the increase of the number of the adsorbed additives the surface layer becomes thinner and solidifies. This results in a gradual transition from the slip to the no-slip boundary condition for the melt flow, with a non-monotonic dependence of the slip length on the surface concentration of the adsorbed ends.

cond-mat.soft

Dynamic surface decoupling in a sheared polymer melt

We propose that several mechanisms contribute to friction in a polymer melt adsorbed at a structured surface. The first one is the well known disentanglement of bulk polymer chains from the surface layer. However, if the surface is ideal at the atomic scale, the adsorbed parts of polymer chains can move along the equipotential lines of the surface potential. This gives rise to a strong slippage of the melt. For high shear rates chains partially desorb. However, the friction force on adsorbed chains increases, resulting in quasi-stick boundary conditions. We propose that the adsorbed layers can be efficiently used to adjust the friction force between the polymer melt and the surface.

cond-mat.soft

Effective pair interactions between colloidal particles at a nematic-isotropic interface

The Landau-de Gennes free energy is used to study theoretically the interaction of parallel cylindrical colloidal particles trapped at a nematic-isotropic interface. We find that the effective interaction potential is non-monotonic. The corresponding force-distance curves exhibit jumps and hysteresis upon approach/separation due to the creation/annihilation of topological defects. Minimization results suggest a simple empirical pair potential for the effective colloid-colloid interaction at the interface. We propose that the interface-mediated interaction can play an important role in self-organization and clustering of colloidal particles at such interfaces.

cond-mat.soft

Capillary bridging and long-range attractive forces in a mean-field approach

When a mixture is confined, one of the phases can condense out. This condensate, which is otherwise metastable in the bulk, is stabilized by the presence of surfaces. In a sphere-plane geometry, routinely used in atomic force microscope (AFM) and surface force apparatus (SFA), it can form a bridge connecting the surfaces. The pressure drop in the bridge gives rise to additional long-range attractive forces between them. Minimizing the free energy of a binary mixture we obtain the force-distance curves as well as the structural phase diagram of the configuration with the bridge. Numerical results predict a discontinuous transition between the states with and without the bridge and linear force-distance curves with hysteresis. We also show that similar phenomenon can be observed in a number of different systems, e.g. liquid crystals and polymer mixtures.

cond-mat.soft

Interaction of colloids with a nematic-isotropic interface

The Landau-de Gennes free energy is used to calculate the interaction between long cylindrical colloids and the nematic-isotropic (NI) interface. This interaction has two contributions: one is specific of liquid crystals and results from the deformation of the director field close to the particles or to the interface, while the other is generic and results from wetting and surface tension effects. Deep in the nematic phase the director field of long cylindrical colloids, with strong homeotropic anchoring, exhibits two half-integer defect lines. As the colloid moves towards the interface, the director configuration changes through a series of discontinuous transitions, where one or two of the defects are annihilated. In addition, the NI interface bends towards the colloid in order to minimize the elastic free energy in the nematic. In the isotropic phase, the colloid is surrounded by a thin nematic layer that reduces the surface free energy under favorable wetting conditions. The interaction has a well-defined minimum near the interface. In this region the director and interfacial structures are complex and cannot be described analytically. Using the numerical results for the Landau-de Gennes free energy in the harmonic region, we obtained simple scaling laws for the (linear) force on the colloid.

cond-mat.soft

Elasticity of polyelectrolyte multilayer microcapsules

We present a novel approach to probe elastic properties of polyelectrolyte multilayer microcapsules. The method is based on measurements of the capsule load-deformation curves with the atomic force microscope. The experiment suggests that at low applied load deformations of the capsule shell are elastic. Using elastic theory of membranes we relate force, deformation, elastic moduli, and characteristic sizes of the capsule. Fitting to the prediction of the model yields the lower limit for Young's modulus of the polyelectrolyte multilayers of the order of 1-100 MPa, depending on the template and solvent used for its dissolution. These values correspond to Young's modulus of an elastomer.

cond-mat.soft

Boundary slip as a result of a prewetting transition

Some fluids exhibit anomalously low friction when flowing against a certain solid wall. To recover the viscosity of a bulk fluid, slip at the wall is usually postulated. On a macroscopic level, a large slip length can be explained as a formation of a film of gas or phase-separated `lubricant' with lower viscosity between the fluid and the solid wall. Here we justify such an assumption in terms of a prewetting transition. In our model the thin-thick film transition together with the viscosity contrast gives rise to large boundary slip. The calculated value of the slip length has a jump at the prewetting transition temperature which depends on the strength of the fluid-surface interaction (contact angle). Furthermore, the temperature dependence of the slip length is non-monotonous.

cond-mat.soft

Young's modulus of polyelectrolyte multilayers from microcapsule swelling

We measure Young's modulus of a free polyelectrolyte multilayer film by studying osmotically induced swelling of polyelectrolyte multilayer microcapsules filled with the polyelectrolyte solution. Different filling techniques and core templates were used for the capsule preparation. Varying the concentration of the polyelectrolyte inside the capsule, its radius and the shell thickness yielded an estimate of an upper limit for Young's modulus of the order of 100 MPa. This corresponds to an elastomer and reflects strong interactions between polyanions and polycations in the multilayer.

cond-mat.soft

Forces between elongated particles in a nematic colloid

Using molecular dynamics (MD) simulations we study the interactions between elongated colloidal particles (length to breath ratio > 1) in a nematic host. The simulation results are compared to the results of a Landau-de Gennes elastic free energy. We find that depletion forces dominate for the sizes of the colloidal particles studied. The tangential component of the force, however, allows us to resolve the elastic contribution to the total interaction. We find that this contribution differs from the quadrupolar interaction predicted at large separations. The difference is due to the presence of nonlinear effects, namely th e change in the positions and structure of the defects and their annihilation at small separations.

cond-mat.soft

Theory and simulation of the nematic zenithal anchoring coefficient

Combining molecular simulation, Onsager theory and the elastic description of nematic liquid crystals, we study the dependence of the nematic liquid crystal elastic constants and the zenithal surface anchoring coefficient on the value of the bulk order parameter.

cond-mat.soft

Defect structures and torque on an elongated colloidal particle immersed in a liquid crystal host

Combining molecular dynamics and Monte Carlo simulation we study defect structures around an elongated colloidal particle embedded in a nematic liquid crystal host. By studying nematic ordering near the particle and the disclination core region we are able to examine the defect core structure and the difference between two simulation techniques. In addition, we also study the torque on a particle tilted with respect to the director, and modification of this torque when the particle is close to the cell wall.

cond-mat.soft

Molecular simulation and theory of a liquid crystalline disclination core

Molecular simulations of a nematic liquid crystal confined in cylinder geometry with homeotropic anchoring have been carried out. The core structure of a disclination line defect of strength +1 has been examined, and comparison made with various theoretical treatments, which are presented in a unified way. It is found that excellent fits to the cylindrically-symmetrized order tensor profiles may be obtained with appropriate parameter choices; notwithstanding this, on the timescales of the simulation, the cylindrical symmetry of the core is broken and two defects of strength +1/2 may be resolved.

cond-mat.soft

Nematic director slippage: Role of the angular momentum of light

We propose a theoretical model of the light-induced director slippage effect. In this effect the bulk director reorientation contributes to the surface director reorientation It is found that the director and ellipticity profiles, obtained in the geometric optics approximation, are dependent on the ellipticity of the incident light wave. The director distribution is spatially modulated in linearly polarized light but grows monotonically in circularly polarized light. The surface director deviation has been examined, and comparison made with existing experimental data, which then permits the magnitude of the orientational nonlinearity coefficient to be calculated.

cond-mat.soft