arXiv subjects

D. Arzoumanian

Publications and source records attributed to D. Arzoumanian.

At least 37 records · Page 2Linked to original sources

arXiv2020

Dust polarized emission observations of NGC 6334; BISTRO reveals the details of the complex but organized magnetic field structure of the high-mass star-forming hub-filament network

[Abridged] Filaments and hubs have received special attention recently thanks to studies showing their role in star formation. While the column density and velocity structures of both filaments and hubs have been studied, their magnetic fields (B-field) are not yet characterized. We aim to understand the role of the B-field in the dynamical evolution of the NGC 6334 hub-filament network. We present new observations of the dust polarized emission at 850$μ$m towards NGC 6334 obtained with the JCMT/POL-2. We study the distribution and dispersion of the polarized intensity ($PI$), the polarization fraction ($PF$), and the B-field angle ($θ_{B}$). We derive the power spectrum of the intensity and $θ_{B}$ along the ridge crest. Our analyses show a complex B-field structure when observed over the whole region ($\sim10$ pc), however, at smaller scales ($\sim1$ pc), $θ_{B}$ varies coherently along the filaments. The observed power spectrum of $θ_{B}$ can be well represented with a power law function with a slope $-1.33\pm0.23$, which is $\sim20\%$ shallower than that of $I$. This result is compatible with the properties of simulated filaments and may indicate the processes at play in the formation of filaments. $θ_{B}$ rotates from being mostly perpendicular to the filament crests to mostly parallel as they merge with the hubs. This variation of $θ_{B}$ may be tracing local velocity flows of matter in-falling onto the hubs. Our analysis suggests a variation of the energy balance along the crests of these filaments, from magnetically critical/supercritical at their far ends to magnetically subcritical near the hubs. We detect an increase of $PF$ towards the high-column density star cluster-forming hubs that may result from the increase of grain alignment efficiency due to stellar radiation from the newborn stars.

astro-ph.GA↗

arXiv2020

The census of dense cores in the Serpens region from the Herschel Gould Belt Survey

The Herschel Gould Belt survey mapped the nearby (d < 500 pc) star-forming regions to understand better how the prestellar phase influences the star formation process. Here we report a complete census of dense cores in a 15 deg2 area of the Serpens star-forming region located between d=420 pc and 484 pc. The PACS and SPIRE cameras imaged this cloud from 70micron to 500micron. With the multi-wavelength source extraction algorithm getsources, we extract 833 sources, of which 709 are starless cores and 124 are candidate proto-stellar cores. We obtain temperatures and masses for all the sample, classifying the starless cores in 604 prestellar cores and 105 unbound cores. Our census of sources is 80% complete for masses larger than 0.8 Msun overall. We produce the core mass function (CMF) and compare it with the initial mass function (IMF). The prestellar CMF is consistent with log-normal trend up to 2 Msun, after which it follows a power-law with slope of -2.05+/-0.34. The tail of its CMF is steeper but still compatible with the IMF for the region we studied in this work. We also extract the filaments network of the Serpens region, finding that 81% of prestellar cores lie on filamentary structures. The spatial association between cores and filamentary structure supports the paradigm, suggested by otherHerschelobservations, that prestellar cores mostly form on filaments. Serpens is confirmed to be a young, low-mass and active star-forming region.

astro-ph.GA↗

arXiv2020

Physical properties of the ambient medium and of dense cores in the Perseus star-forming region derived from Herschel Gould Belt Survey observations

(Abridged) In this paper, we present analyses of images taken with the Herschel ESA satellite from 70mu to 500mu. We first constructed column density and dust temperature maps. Next, we identified compact cores in the maps, and characterize the cores using modified blackbody fits to their SEDs: we identified 684 starless cores, of which 199 are bound and potential prestellar cores, and 132 protostars. We also matched the Herschel-identified young stars with GAIA sources to model distance variations across the Perseus cloud. We measure a linear gradient function with right ascension and declination for the entire cloud. From the SED fits, mass and temperature of cores were derived. The core mass function can be modelled with a log-normal distribution that peaks at 0.82~$M_\sun$ suggesting a star formation efficiency of 0.30. The high-mass tail can be modelled with a power law of slope $\sim-2.32$, close to the Salpeter's value. We also identify the filamentary structure of Perseus, confirming that stars form preferentially in filaments. We find that the majority of filaments where star formation is ongoing are transcritical against their own internal gravity because their linear masses are below the critical limit of 16~$M_\sun$pc$^{-1}$ above which we expect filaments to collapse. We find a possible explanation for this result, showing that a filament with a linear mass as low as 8~$M_\sun$pc$^{-1}$ can be already unstable. We confirm a linear relation between star formation efficiency and slope of dust probability density function and a similar relation is also seen with the core formation efficiency. We derive a lifetime for the prestellar core phase of $1.69\pm0.52$~Myr for Perseus but different regions have a wide range in prestellar core fractions, hint that star-formation has started only recently in some clumps. We also derive a free-fall time for prestellar cores of 0.16~Myr.

astro-ph.GA↗

arXiv2020

Formation of the Musca filament: Evidence for asymmetries in the accretion flow due to a cloud-cloud collision

Context. Dense molecular filaments are ubiquituous in the interstellar medium, yet their internal physical conditions and formation mechanism remain debated. Aims. We study the kinematics and physical conditions in the Musca filament and the Chamaeleon-Musca complex to constrain the physics of filament formation. Methods. We produced CO(2-1) isotopologue maps with the APEX telescope that cut through the Musca filament. We further study a NANTEN2 $^{12}$CO(1-0) map of the Musca cloud and the HI emission of the Chamaeleon-Musca complex. Results. The Musca cloud contains multiple velocity components. Radiative transfer modelling of the CO emission indicates that the Musca filament consists of a cold ($\sim$10 K), dense (n$_{H_2}\sim$10$^4$ cm$^{-3}$) crest, which is best described with a cylindrical geometry. Connected to the crest, a separate gas component at T$\sim$15 K and n$_{H_2}\sim$10$^3$ cm$^{-3}$ is found, the so-called strands. The filament crest has a transverse velocity gradient that is linked to the kinematics of the nearby ambient cloud. Studying the large scale kinematics, we find coherence of the asymmetric kinematics from the 50 pc HI cloud down to the Musca filament. We also report a strong [C$^{18}$O]/[$^{13}$CO] abundance drop by an order of magnitude from the filament crest to the strands over a distance $<$ 0.2 pc in a weak far-ultraviolet (FUV) field. Conclusions. The dense Musca filament crest is a long-lived (several crossing times), dynamic structure that can form stars in the near future because of continuous mass accretion. This mass accretion appears to be triggered by a HI cloud-cloud collision, which bends the magnetic field around dense filaments. This bending of the magnetic field is then responsible for the observed asymmetric accretion scenario of the Musca filament, which is, for instance, seen as a V-shape in the position-velocity (PV) diagram.

astro-ph.GA↗

arXiv2020

Unifying low and high mass star formation through density amplified hubs of filaments

Context: Star formation takes place in giant molecular clouds, resulting in mass-segregated young stellar clusters composed of Sun-like stars, brown dwarves, and massive O-type(50-100\msun) stars. Aims: To identify candidate hub-filament systems (HFS) in the Milky-Way and examine their role in the formation of the highest mass stars and star clusters. Methods: Filaments around ~35000 HiGAL clumps that are detected using the DisPerSE algorithm. Hub is defined as a junction of three or more filaments. Column density maps were masked by the filament skeletons and averaged for HFS and non-HFS samples to compute the radial profile along the filaments into the clumps. Results: ~3700~(11\%) are candidate HFS of which, ~2150~(60\%) are pre-stellar, ~1400~(40\%) are proto-stellar. All clumps with L>10^4 Lsun and L>10^5 Lsun at distances respectively within 2kpc and 5kpc are located in the hubs of HFS. The column-densities of hubs are found to be enhanced by a factor of ~2 (pre-stellar sources) up to ~10 (proto-stellar sources). Conclusions: All high-mass stars preferentially form in the density enhanced hubs of HFS. This amplification can drive the observed longitudinal flows along filaments providing further mass accretion. Radiation pressure and feedback can escape into the inter-filamentary voids. We propose a "filaments to clusters" unified paradigm for star formation, with the following salient features: a) low-intermediate mass stars form in the filaments slowly (10^6yr) and massive stars quickly (10^5yr) in the hub, b) the initial mass function is the sum of stars continuously created in the HFS with all massive stars formed in the hub, c) Feedback dissiption and mass segregation arise naturally due to HFS properties, and c) explain age spreads within bound clusters and formation of isolated OB associations.

astro-ph.GA↗

arXiv2020

The accretion history of high-mass stars: An ArTéMiS pilot study of Infrared Dark Clouds

The mass growth of protostars is a central element to the determination of fundamental stellar population properties such as the initial mass function. Constraining the accretion history of individual protostars is therefore an important aspect of star formation research. The goal of the study presented here is to determine whether high-mass (proto)stars gain their mass from a compact (<0.1pc) fixed-mass reservoir of gas, often referred to as dense cores, in which they are embedded, or whether the mass growth of high-mass stars is governed by the dynamical evolution of the parsec-scale clump that typically surrounds them. To achieve this goal, we performed a 350micron continuum mapping of 11 infrared dark clouds, along side some of their neighbouring clumps, with the ArTéMiS camera on APEX. By identifying about 200 compact ArTéMiS sources, and matching them with Herschel Hi-GAL 70micron sources, we have been able to produce mass vs. temperature diagrams. We compare the nature (i.e. starless or protostellar) and location of the ArTéMiS sources in these diagrams with modelled evolutionary tracks of both core-fed and clump-fed accretion scenarios. We argue that the latter provide a better agreement with the observed distribution of high-mass star-forming cores. However, a robust and definitive conclusion on the question of the accretion history of high-mass stars requires larger number statistics.

astro-ph.GA↗

arXiv2020

The role of Galactic HII regions in the formation of filaments. High-resolution submilimeter imaging of RCW 120 with ArTéMiS

Massive stars and their associated ionized (HII) regions could play a key role in the formation and evolution of filaments that host star formation. However, the properties of filaments that interact with H regions are still poorly known. To investigate the impact of HII regions on the formation of filaments, we imaged the Galactic HII region RCW 120 and its surroundings where active star formation takes place and where the role of ionization feedback on the star formation process has already been studied. We used the ArTéMiS camera on the APEX telescope and combined the ArTéMiS data at 350 and 450 microns with Herschel-SPIRE/HOBYS. We studied the dense gas distribution around RCW 120 with a resolution of 8 arcsec (0.05 pc at a distance of 1.34 kpc). Our study allows us to trace the median radial intensity profile of the dense shell of RCW 120. This profile is asymmetric, indicating a clear compression from the HII region on the inner part of the shell. The profile is observed to be similarly asymmetric on both lateral sides of the shell, indicating a homogeneous compression over the surface. On the contrary, the profile analysis of a radial filament associated with the shell, but located outside of it, reveals a symmetric profile, suggesting that the compression from the ionized region is limited to the dense shell. The mean intensity profile of the internal part of the shell is well fitted by a Plummer like profile with a deconvolved Gaussian FWHM of 0.09 pc, as observed for filaments in low-mass star-forming regions. This study suggests that compression exerted by HII regions may play a key role in the formation of filaments and may further act on their hosted star formation. ArTéMiS data also suggest that RCW 120 might be a 3D ring, rather than a spherical structure

astro-ph.GA↗

arXiv2020

Properties of the dense core population in Orion B as seen by the Herschel Gould Belt survey

We present a detailed study of the Orion B clouds (d~400 pc), imaged with the PACS/SPIRE cameras at 70-500 $μ$m by the Herschel Gould Belt survey (HGBS). We release new high-res. maps of column density and dust temperature. In the filamentary sub-regions NGC2023/2024, NGC2068/2071, and L1622, 1768 starless dense cores were identified, ~28-45% of which are self-gravitating prestellar cores. A total of 76 protostellar dense cores were also found. The typical lifetime of the prestellar cores was found to be $t_{\rm pre}=1.7_{-0.6}^{+0.8}$ Myr. The prestellar core mass function (CMF) peaks at ~0.5 $M_\odot$ and is consistent with a power law with log slope -1.27$\pm$0.24 at the high-mass end, compared to the Salpeter slope of -1.35. In this region, we confirm the existence of a transition in prestellar core formation efficiency (CFE) around a fiducial value A_V_bg~7 mag in background visual extinction, similar to the trend observed with Herschel in other clouds. This is not a sharp threshold, but a smooth transition between a regime with very low prestellar CFE at A_V_bg<5 and a regime with higher, roughly constant CFE at A_V_bg$\gtrsim$10. The total mass in the form of prestellar cores represents only ~20% of the dense molecular cloud gas at A_V_bg$\gtrsim$7 mag. About 60-80% of the prestellar cores are closely associated with filaments, and this fraction increases up to >90% when a more complete sample of filamentary structures is considered. Interestingly, the median separation between nearest core neighbors corresponds to the typical inner filament width of ~0.1 pc commonly observed in nearby molecular clouds. Analysis of the CMF observed as a function of background cloud column density shows that the most massive prestellar cores are spatially segregated in the highest column density areas, and suggests that both higher- and lower-mass prestellar cores may form in denser filaments.

astro-ph.SR↗

arXiv2019

Probing fragmentation and velocity sub-structure in the massive NGC 6334 filament with ALMA

Herschel surveys of Galactic clouds support a paradigm for low-mass star formation in which dense filaments play a crucial role. The detailed fragmentation properties of star-forming filaments remain poorly understood, however, and the validity of the filament paradigm in the high-mass regime is still unclear. To investigate the density/velocity structure of the filament in the high-mass star-forming region NGC6334, we conducted ALMA observations in the 3mm continuum and the N2H+(1-0) line at ~3arcsec resolution. The filament was detected in both tracers. We identified 26 cores at 3mm and 5 velocity-coherent fiber-like features in N2H+ within the filament. The typical length of, and velocity difference between, the fiber-like features of the NGC6334 filament are reminiscent of the properties for the fibers of the low-mass star-forming filament B211/B213. Only 2 or 3 of the 5 velocity-coherent features are well aligned with the filament and may represent genuine, fiber sub-structures. The core mass distribution has a peak at ~10Msun. They can be divided into 7 groups of cores, closely associated with ArTeMiS clumps. The projected separation between cores and the projected spacing between clumps are roughly consistent with the effective Jeans length in the filament and a physical scale of about 4 times the filament width, respectively, suggesting a bimodal filament fragmentation process. Despite being one order of magnitude denser and more massive than the B211/B213 filament, the NGC6334 filament has a similar density/velocity structure. The difference is that the cores in NGC6334 appear to be an order of magnitude denser and more massive than the cores in Taurus. This suggests that dense filaments may evolve and fragment in a similar manner in low- and high-mass star-forming regions, and that the filament paradigm may hold in the intermediate-mass (if not high-mass) star formation regime.

astro-ph.GA↗

arXiv2019

Probing the cold magnetized Universe with SPICA-POL (B-BOP)

SPICA, the cryogenic infrared space telescope recently pre-selected for a `Phase A' concept study as one of the three remaining candidates for ESA's fifth medium class (M5) mission, is foreseen to include a far-infrared polarimetric imager (SPICA-POL, now called B-BOP), which would offer a unique opportunity to resolve major issues in our understanding of the nearby, cold magnetized Universe. This paper presents an overview of the main science drivers for B-BOP, including high dynamic range polarimetric imaging of the cold interstellar medium (ISM) in both our Milky Way and nearby galaxies. Thanks to a cooled telescope, B-BOP will deliver wide-field 100-350 micron images of linearly polarized dust emission in Stokes Q and U with a resolution, signal-to-noise ratio, and both intensity and spatial dynamic ranges comparable to those achieved by Herschel images of the cold ISM in total intensity (Stokes I). The B-BOP 200 micron images will also have a factor ~30 higher resolution than Planck polarization data. This will make B-BOP a unique tool for characterizing the statistical properties of the magnetized interstellar medium and probing the role of magnetic fields in the formation and evolution of the interstellar web of dusty molecular filaments giving birth to most stars in our Galaxy. B-BOP will also be a powerful instrument for studying the magnetism of nearby galaxies and testing galactic dynamo models, constraining the physics of dust grain alignment, informing the problem of the interaction of cosmic rays with molecular clouds, tracing magnetic fields in the inner layers of protoplanetary disks, and monitoring accretion bursts in embedded protostars.

astro-ph.GA↗

arXiv2018

Probing accretion of ambient cloud material into the Taurus B211/B213 filament

Herschel observations have emphasized the role of molecular filaments in star formation. However, the origin and evolution of these filaments are not yet well understood, partly because of the lack of kinematic information. To examine whether the B211/B213 filament is accreting background gas due to its gravitational potential, we produced a toy accretion model and compared its predictions to the 12CO(1--0) and 13CO(1--0) velocity patterns. We also examined the spatial distributions of Halpha, 857 GHz continuum, and HI emission to search for evidence of large-scale external effects. We estimated the depth of the cloud around the B211/B213 filament to be 0.3--0.7 pc under the assumption that the density of the gas is the same as the 13CO critical density. Compared to a linear extent of >10 pc in the plane of the sky, this suggests that the 3D morphology of the cloud is sheet-like. 12CO and 13CO PV diagrams perpendicular to the filament axis show that the emission from the gas surrounding B211/B213 is redshifted to the northeast of the filament and blueshifted to the southwest, respectively, and that the velocities of both components approach the filament velocity as the line of sight approaches the filament crest. The PV diagrams predicted by our accretion model are in good agreement with the observed 12CO and 13CO PV diagrams, supporting the scenario of mass accretion into the filament proposed by Palmeirim et al. Moreover, inspection of the distribution of the Halpha and 857 GHz emission in the Taurus-California-Perseus region suggests that the B211/B213 filament may have formed as a result of an expanding supershell generated by the Per OB2 association. Based on these results, we propose a scenario in which the B211/B213 filament was initially formed by large-scale compression of HI gas and then is now growing in mass due to the gravitational accretion of ambient cloud molecular gas.

astro-ph.GA↗

arXiv2018

Characterizing the properties of nearby molecular filaments observed with Herschel

[Abridged] Molecular filaments have received special attention recently, thanks to new observational results on their properties. In particular, our early analysis of filament properties revealed a narrow distribution of median widths centered at a value of about 0.1 pc. Here, we extend and complement our initial study with the analysis of the filamentary structures observed in eight nearby molecular clouds. We use the column density maps derived from Herschel data and the DisPerSE algorithm to trace a network of filaments in each cloud. We build synthetic maps to assess the completeness limit of our extracted sample and validate our measurements. Our analysis yields a selected sample of 599 filaments with aspect ratios larger than 3 and column density contrasts larger than 0.3. We show that our sample is more than 95% complete for column density contrasts larger than 1, with only 5% of spurious detections. On average, more than 15% of the total gas mass in the clouds, and more than 80% of the dense gas mass, is found to be in the form of filaments, respectively. Analysis of the radial column density profiles of the 599 filaments indicates a narrow distribution of crest-averaged inner widths, with a median value of 0.10 pc and an interquartile range of 0.07 pc. In contrast, the filaments span wide ranges in length, central column density, column density contrast, and mass per unit length. The characteristic filament width is well resolved by Herschel observations, and a median value of 0.1 pc is consistently found using three distinct estimates based on (1) a direct measurement of the width at half power after background subtraction, as well as (2) Gaussian and (3) Plummer fits. The existence of a characteristic filament width is further supported by the presence of a tight correlation between mass per unit length and central column density for the observed filaments.

astro-ph.GA↗

arXiv2018

A catalogue of dense cores and young stellar objects in the Lupus complex based on Herschel Gould Belt Survey observations

The Herschel Gould Belt Survey key project mapped the bulk of nearby star-forming molecular clouds in five far-infrared bands with the aim of compiling complete census of prestellar cores and young, embedded protostars. In this paper, we present the catalogue of the dense cores and YSOs/protostars extracted from the Herschel maps of the Lupus I, III, and IV molecular clouds. The physical properties of the detected objects were derived by fitting their spectral energy distributions. A total of 532 dense cores, out of which 103 are presumably prestellar in nature, and 38 YSOs/protostars have been detected in the three clouds. Almost all the prestellar cores are associated with filaments against only about one third of the unbound cores and YSOs/protostars. Prestellar core candidates are found even in filaments that are on average thermally sub-critical and over a background column density lower than that measured in other star forming regions so far. The core mass function of the prestellar cores peaks between 0.2 and 0.3 solar masses and it is compatible with the log-normal shape found in other regions. Herschel data reveal several, previously undetected, protostars and new candidates of Class 0 and Class II with transitional disks. We estimate the evolutionary status of the YSOs/protostars using two independent indicators: the $α$ index and the fitting of the spectral energy distribution from near- to far-infrared wavelengths. For 70% of the objects, the evolutionary stages derived with the two methods are in agreement. Lupus is confirmed to be a very low-mass star-forming region, both in terms of the prestellar condensations and of the diffuse medium. Noticeably, in the Lupus clouds we have found star formation activity associated with interstellar medium at low column density, usually quiescent in other (more massive) star forming regions.

astro-ph.GA↗

arXiv2018

The dense cores and filamentary structure of the molecular cloud in Corona Australis. Herschel SPIRE and PACS observations from the Herschel Gould Belt Survey

We present a catalogue of prestellar and starless cores within the Corona Australis molecular cloud using photometric data from the Herschel Space Observatory. At a distance of d~130 pc, Corona Australis is one of the closest star-forming regions. Herschel has taken multi-wavelength data of Corona Australis with both the SPIRE and PACS photometric cameras in a parallel mode with wavelengths in the range 70 μm to 500 μm. A complete sample of starless and prestellar cores and embedded protostars is identified. Other results from the Herschel Gould Belt Survey have shown spatial correlation between the distribution of dense cores and the filamentary structure within the molecular clouds. We go further and show correlations between the properties of these cores and their spatial distribution within the clouds, with a particular focus on the mass distribution of the dense cores with respect to their filamentary proximity. We find that only lower-mass starless cores form away from filaments, while all of the higher-mass prestellar cores form in close proximity to, or directly on the filamentary structure. This result supports the paradigm that prestellar cores mostly form on filaments. We analyse the mass distribution across the molecular cloud, finding evidence that the region around the Coronet appears to be at a more dynamically advanced evolutionary stage to the rest of the clumps within the cloud.

astro-ph.GA↗

arXiv2017

The earliest phases of high-mass star formation, as seen in NGC 6334 by \emph{Herschel}

To constrain models of high-mass star formation, the Herschel/HOBYS KP aims at discovering massive dense cores (MDCs) able to host the high-mass analogs of low-mass prestellar cores, which have been searched for over the past decade. We here focus on NGC6334, one of the best-studied HOBYS molecular cloud complexes. We used Herschel PACS and SPIRE 70-500mu images of the NGC6334 complex complemented with (sub)millimeter and mid-infrared data. We built a complete procedure to extract ~0.1 pc dense cores with the getsources software, which simultaneously measures their far-infrared to millimeter fluxes. We carefully estimated the temperatures and masses of these dense cores from their SEDs. A cross-correlation with high-mass star formation signposts suggests a mass threshold of 75Msun for MDCs in NGC6334. MDCs have temperatures of 9.5-40K, masses of 75-1000Msun, and densities of 10^5-10^8cm-3. Their mid-IR emission is used to separate 6 IR-bright and 10 IR-quiet protostellar MDCs while their 70mu emission strength, with respect to fitted SEDs, helps identify 16 starless MDC candidates. The ability of the latter to host high-mass prestellar cores is investigated here and remains questionable. An increase in mass and density from the starless to the IR-quiet and IR-bright phases suggests that the protostars and MDCs simultaneously grow in mass. The statistical lifetimes of the high-mass prestellar and protostellar core phases, estimated to be 1-7x10^4yr and at most 3x10^5yr respectively, suggest a dynamical scenario of high-mass star formation. The present study provides good mass estimates for a statistically significant sample, covering the earliest phases of high-mass star formation. High-mass prestellar cores may not exist in NGC6334, favoring a scenario presented here, which simultaneously forms clouds and high-mass protostars.

astro-ph.GA↗

arXiv2016

Characterizing filaments in regions of high-mass star formation: High-resolution submilimeter imaging of the massive star-forming complex NGC 6334 with ArTéMiS

Herschel observations of nearby molecular clouds suggest that interstellar filaments and prestellar cores represent two fundamental steps in the star formation process. The observations support a picture of low-mass star formation according to which ~ 0.1 pc-wide filaments form first in the cold interstellar medium, probably as a result of large-scale compression of interstellar matter by supersonic turbulent flows, and then prestellar cores arise from gravitational fragmentation of the densest filaments. Whether this scenario also applies to regions of high-mass star formation is an open question, in part because Herschel data cannot resolve the inner width of filaments in the nearest regions of massive star formation. We used the bolometer camera ArTeMiS on the APEX telescope to map the central part of the NGC6334 complex at a factor of > 3 higher resolution than Herschel at 350 microns. Combining ArTeMiS data with Herschel data allowed us to study the structure of the main filament of the complex with a resolution of 8" or < 0.07 pc at d ~ 1.7 kpc. Our study confirms that this filament is a very dense, massive linear structure with a line mass ranging from ~ 500 Msun/pc to ~ 2000 Msun/pc over nearly 10 pc. It also demonstrates that its inner width remains as narrow as W ~ 0.15 +- 0.05 pc all along the filament length, within a factor of < 2 of the characteristic 0.1 pc value found with Herschel for lower-mass filaments in the Gould Belt. While it is not completely clear whether the NGC 6334 filament will form massive stars or not in the future, it is two to three orders of magnitude denser than the majority of filaments observed in Gould Belt clouds, and yet has a very similar inner width. This points to a common physical mechanism for setting the filament width and suggests that some important structural properties of nearby clouds also hold in high-mass star forming regions.

astro-ph.GA↗

arXiv2016

Globules and Pillars in Cygnus X I. Herschel Far-infrared imaging of the Cyg OB2 environment

The radiative feedback of massive stars on molecular clouds creates pillars, globules and other features at the interface between the HII region and molecular cloud. We present here Herschel observations between 70 and 500 micron of the immediate environment of the Cygnus OB2 association, performed within the HOBYS program. All structures were detected based on their appearance at 70 micron, and have been classified as pillars, globules, evaporating gasous globules (EGGs), proplyd-like objects, and condensations. From the 70 and 160 micron flux maps, we derive the local FUV field on the PDR surfaces. In parallel, we use a census of the O-stars to estimate the overall FUV-field, that is 10^3-10^4 G_0 close to the central OB cluster (within 10 pc) and decreases down to a few tens G_0, in a distance of 50 pc. From a SED fit to the four longest Herschel wavelengths, we determine column density and temperature maps and derive masses, volume densities and surface densities for these structures. We find that the morphological classification corresponds to distinct physical properties. Pillars and globules have the longest estimated photoevaporation lifetimes, a few 10^6 yr, while all other features should survive less than that. These lifetimes are consistent with that found in simulations of turbulent, UV-illuminated clouds. We propose a tentative evolutionary scheme in which pillars can evolve into globules, which in turn then evolve into EGGs, condensations and proplyd-like objects.

astro-ph.GA↗

arXiv2016

Planck intermediate results. XLIV. The structure of the Galactic magnetic field from dust polarization maps of the southern Galactic cap

We study the statistical properties of interstellar dust polarization at high Galactic latitude, using the Stokes parameter Planck maps at 353 GHz. Our aim is to advance the understanding of the magnetized interstellar medium (ISM), and to provide a model of the polarized dust foreground for cosmic microwave background component-separation procedures. Focusing on the southern Galactic cap, we examine the statistical distributions of the polarization fraction ($p$) and angle ($ψ$) to characterize the ordered and turbulent components of the Galactic magnetic field (GMF) in the solar neighbourhood. We relate patterns at large angular scales in polarization to the orientation of the mean (ordered) GMF towards Galactic coordinates $(l_0,b_0)=(70^\circ \pm 5^\circ,24^\circ \pm 5^\circ)$. The histogram of $p$ shows a wide dispersion up to 25 %. The histogram of $ψ$ has a standard deviation of $12^\circ$ about the regular pattern expected from the ordered GMF. We use these histograms to build a phenomenological model of the turbulent component of the GMF, assuming a uniform effective polarization fraction ($p_0$) of dust emission. To model the Stokes parameters, we approximate the integration along the line of sight (LOS) as a sum over a set of $N$ independent polarization layers, in each of which the turbulent component of the GMF is obtained from Gaussian realizations of a power-law power spectrum. We are able to reproduce the observed $p$ and $ψ$ distributions using: a $p_0$ value of (26 $\pm$ 3)%; a ratio of 0.9 $\pm$ 0.1 between the strengths of the turbulent and mean components of the GMF; and a small value of $N$. We relate the polarization layers to the density structure and to the correlation length of the GMF along the LOS.

astro-ph.GA↗