arXiv subjects

D. Burke

Publications and source records attributed to D. Burke.

At least 19 recordsLinked to original sources

arXiv2025

Chandra X-ray Observatory study of the X-ray emission of PKS 0023-26 and comparison with recent ALMA results

We present a deep high-resolution Chandra X-ray Observatory image data of a powerful compact radio source PKS 0023-26 associated with a quasar at redshift 0.322. The earlier studies of the optical environment suggested that the source could be located in a galaxy cluster or a group. However, we report a non-detection of hot gas on large scales (out to $\sim 60$ kpc radius) and place an upper limit on the X-ray luminosity of $<3\times10^{42}$ erg s$^{-1}$, consistent only with the presence of a poor, low-temperature ($\rm kT < 0.5$ keV) galaxy group. X-ray spectral analysis of the central circular region, $r<7$ kpc shows, in addition to the mildly absorbed AGN, a thermal emission component with a temperature of $\rm kT=0.9^{+0.19}_{-0.37}$ keV. We discuss the origin of this hot component as a result of interaction between the evolving radio source and the interstellar medium. Our high angular resolution X-ray image traces the distribution of hot gas which is closely aligned with and extends beyond the radio source, and also in the direction perpendicular to the radio source axis. The X-rays are enhanced at the northern radio lobe and the location of the peak of the CO(3-2)/CO(2-1) line emission, suggesting that the interactions between the jet and cold medium result in the X-ray radiation which excites CO. The shock driven by the jet into the ISM is supersonic with the Mach number of $\mathcal{M} \sim 1.75-2$, creating the cocoon of hot X-rays surrounding the radio source. This result agrees with observations of shocks in other radio galaxies pointing to a prevalent impact of jets on ISM.

astro-ph.GA↗

arXiv2025

Synthetic spin-orbit coupling in superconductor-semiconductor hybrid nanowires with micromagnet arrays

Spin-orbit interaction accounts for the coupling of momentum and spin degrees of freedom of electrons and holes in semiconductor materials. In quantum information processing, it allows for electrical control of spin states and for the engineering of topologically protected Majorana zero modes. Although such functionalities were previously considered to be limited to semiconductor materials with strong intrinsic spin-orbit interactions only, recent theoretical work proposes using external rotating magnetic fields to engineer synthetic spin-orbit coupling. This would relax material constraints and open up new research directions for materials with low intrinsic spin-orbit interaction or augment existing spin-orbit interaction in materials in which this interaction is already strong. Here we demonstrate the feasibility of this approach and introduce rotating magnetic fields along an InAs/Al hybrid nanowire using permalloy micromagnet arrays which yields an estimated synthetic Rashba spin-orbit interaction coefficient of 0.022 eV nm. We use transport spectroscopy and the energy dependence of Andreev bound states in the nanowires as a probe of the magnetic field profiles of the micromagnets which are reconfigurably prepared in parallel or antiparallel magnetization configurations.

cond-mat.mes-hall↗

arXiv2022

Dark Energy Survey Year 3 results: imprints of cosmic voids and superclusters in the Planck CMB lensing map

The CMB lensing signal from cosmic voids and superclusters probes the growth of structure in the low-redshift cosmic web. In this analysis, we cross-correlated the Planck CMB lensing map with voids detected in the Dark Energy Survey Year 3 (Y3) data set ($\sim$5,000 deg$^{2}$), expanding on previous measurements that used Y1 catalogues ($\sim$1,300 deg$^{2}$). Given the increased statistical power compared to Y1 data, we report a $6.6σ$ detection of negative CMB convergence ($κ$) imprints using approximately 3,600 voids detected from a redMaGiC luminous red galaxy sample. However, the measured signal is lower than expected from the MICE N-body simulation that is based on the $Λ$CDM model (parameters $Ω_{\rm m} = 0.25$, $σ_8 = 0.8$), and the discrepancy is associated mostly with the void centre region. Considering the full void lensing profile, we fit an amplitude $A_κ=κ_{\rm DES}/κ_{\rm MICE}$ to a simulation-based template with fixed shape and found a moderate $2σ$ deviation in the signal with $A_κ\approx0.79\pm0.12$. We also examined the WebSky simulation that is based on a Planck 2018 $Λ$CDM cosmology, but the results were even less consistent given the slightly higher matter density fluctuations than in MICE. We then identified superclusters in the DES and the MICE catalogues, and detected their imprints at the $8.4σ$ level; again with a lower-than-expected $A_κ=0.84\pm0.10$ amplitude. The combination of voids and superclusters yields a $10.3σ$ detection with an $A_κ=0.82\pm0.08$ constraint on the CMB lensing amplitude, thus the overall signal is $2.3σ$ weaker than expected from MICE.

astro-ph.CO↗

arXiv2022

QUBIC VII: The feedhorn-switch system of the technological demonstrator

We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration. We manufactured the horns in aluminum platelets milled by photo-chemical etching and mechanically tightened with screws. The switches are based on steel blades that open and close the wave-guide between the back-to-back horns and are operated by miniaturized electromagnets. We also show the current development status of the feedhorn-switch system for the QUBIC full instrument, based on an array of 400 horn-switch assemblies.

astro-ph.IM↗

arXiv2022

QUBIC II: Spectro-Polarimetry with Bolometric Interferometry

Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foregrounds. In this paper, the methodology is illustrated with examples based on the Q \& U Bolometric Interferometer for Cosmology (QUBIC) which is a ground-based instrument designed to measure the B-mode polarization of the sky at millimeter wavelengths. We consider the specific cases of point source reconstruction and Galactic dust mapping and we characterize the point spread function as a function of frequency. We study the noise properties of spectral imaging, especially the correlations between sub-bands, using end-to-end simulations together with a fast noise simulator. We conclude showing that spectral imaging performance are nearly optimal up to five sub-bands in the case of QUBIC.

astro-ph.IM↗

arXiv2022

QUBIC III: Laboratory Characterization

A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam, the measurement of interference fringes, and the measurement of polarization performance. A modulated and frequency tunable millimetre-wave source in the telescope far-field is used to simulate a point source. The QUBIC pointing is scanned across the point source to produce beam maps. Polarization modulation is measured using a rotating Half Wave Plate. The measured beam matches well to the theoretical simulations and gives QUBIC the ability to do spectro imaging. The polarization performance is excellent with less than 0.5\% cross-polarization rejection. QUBIC is ready for deployment on the high altitude site at Alto Chorillo, Argentina to begin scientific operations.

astro-ph.IM↗

arXiv2021

The DES view of the Eridanus supervoid and the CMB Cold Spot

The Cold Spot is a puzzling large-scale feature in the Cosmic Microwave Background temperature maps and its origin has been subject to active debate. As an important foreground structure at low redshift, the Eridanus supervoid was recently detected, but it was subsequently determined that, assuming the standard $Λ$CDM model, only about 10-20$\%$ of the observed temperature depression can be accounted for via its Integrated Sachs-Wolfe imprint. However, $R\gtrsim100~h^{-1}\mathrm{Mpc}$ supervoids elsewhere in the sky have shown ISW imprints $A_{\mathrm{ISW}}\approx5.2\pm1.6$ times stronger than expected from $Λ$CDM ($A_{\mathrm{ISW}}=1$), which warrants further inspection. Using the Year-3 redMaGiC catalogue of luminous red galaxies from the Dark Energy Survey, here we confirm the detection of the Eridanus supervoid as a significant under-density in the Cold Spot's direction at $z<0.2$. We also show, with $\mathrm{S/N}\gtrsim5$ significance, that the Eridanus supervoid appears as the most prominent large-scale under-density in the dark matter mass maps that we reconstructed from DES Year-3 gravitational lensing data. While we report no significant anomalies, an interesting aspect is that the amplitude of the lensing signal from the Eridanus supervoid at the Cold Spot centre is about $30\%$ lower than expected from similar peaks found in N-body simulations based on the standard $Λ$CDM model with parameters $Ω_{\rm m} = 0.279$ and $σ_8 = 0.82$. Overall, our results confirm the causal relation between these individually rare structures in the cosmic web and in the CMB, motivating more detailed future surveys in the Cold Spot region.

astro-ph.CO↗

arXiv2021

Dark Energy Survey Year 3 Results: Galaxy Sample for BAO Measurement

In this paper we present and validate the galaxy sample used for the analysis of the Baryon Acoustic Oscillation signal (BAO) in the Dark Energy Survey (DES) Y3 data. The definition is based on a colour and redshift-dependent magnitude cut optimized to select galaxies at redshifts higher than 0.5, while ensuring a high quality photometric redshift determination. The sample covers $\approx 4100$ square degrees to a depth of $i = 22.3 \ (AB)$ at $10σ$. It contains 7,031,993 galaxies in the redshift range from $z$= 0.6 to 1.1, with a mean effective redshift of 0.835. Photometric redshifts are estimated with the machine learning algorithm DNF, and are validated using the VIPERS PDR2 sample. We find a mean redshift bias of $z_{\mathrm{bias}} \approx 0.01$ and a mean uncertainty, in units of $1+z$, of $σ_{68} \approx 0.03$. We evaluate the galaxy population of the sample, showing it is mostly built upon Elliptical to Sbc types. Furthermore, we find a low level of stellar contamination of $\lesssim 4\%$. We present the method used to mitigate the effect of spurious clustering coming from observing conditions and other large-scale systematics. We apply it to the DES Y3 BAO sample and calculate sample weights that are used to get a robust estimate of the galaxy clustering signal. This paper is one of a series dedicated to the analysis of the BAO signal in the DES Y3 data. In the companion papers, Ferrero et al. (2021) and DES Collaboration (2021), we present the galaxy mock catalogues used to calibrate the analysis and the angular diameter distance constraints obtained through the fitting to the BAO scale, respectively. The galaxy sample, masks and additional material will be released in the public DES data repository upon acceptance.

astro-ph.CO↗

arXiv2021

Dark Energy Survey Year 3 results: Cosmology with peaks using an emulator approach

We constrain the matter density $Ω_{\mathrm{m}}$ and the amplitude of density fluctuations $σ_8$ within the $Λ$CDM cosmological model with shear peak statistics and angular convergence power spectra using mass maps constructed from the first three years of data of the Dark Energy Survey (DES Y3). We use tomographic shear peak statistics, including cross-peaks: peak counts calculated on maps created by taking a harmonic space product of the convergence of two tomographic redshift bins. Our analysis follows a forward-modelling scheme to create a likelihood of these statistics using N-body simulations, using a Gaussian process emulator. We include the following lensing systematics: multiplicative shear bias, photometric redshift uncertainty, and galaxy intrinsic alignment. Stringent scale cuts are applied to avoid biases from unmodelled baryonic physics. We find that the additional non-Gaussian information leads to a tightening of the constraints on the structure growth parameter yielding $S_8~\equiv~σ_8\sqrt{Ω_{\mathrm{m}}/0.3}~=~0.797_{-0.013}^{+0.015}$ (68% confidence limits), with a precision of 1.8%, an improvement of ~38% compared to the angular power spectra only case. The results obtained with the angular power spectra and peak counts are found to be in agreement with each other and no significant difference in $S_8$ is recorded. We find a mild tension of $1.5 \thinspace σ$ between our study and the results from Planck 2018, with our analysis yielding a lower $S_8$. Furthermore, we observe that the combination of angular power spectra and tomographic peak counts breaks the degeneracy between galaxy intrinsic alignment $A_{\mathrm{IA}}$ and $S_8$, improving cosmological constraints. We run a suite of tests concluding that our results are robust and consistent with the results from other studies using DES Y3 data.

astro-ph.CO↗

arXiv2021

QUBIC IV: Performance of TES Bolometers and Readout Electronics

A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are controlled and amplified by an SiGe application specific integrated circuit at 40 K. We report the performance of this readout chain and the characterization of the TES. The readout system has been functionally tested and characterized in the lab and in QUBIC. The low noise amplifier demonstrated a white noise level of 0.3 nV.Hz^-0.5. Characterizations of the QUBIC detectors and readout electronics includes the measurement of I-V curves, time constant and the noise equivalent power. The QUBIC TES bolometer array has approximately 80% detectors within operational parameters. It demonstrated a thermal decoupling compatible with a phonon noise of about 5.10^-17 W.Hz^-0.5 at 410 mK critical temperature. While still limited by microphonics from the pulse tubes and noise aliasing from readout system, the instrument noise equivalent power is about 2.10^-16 W.Hz^-0.5, enough for the demonstration of bolometric interferometry.

astro-ph.IM↗

arXiv2021

QUBIC I: Overview and ScienceProgram

The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematic effects with those of bolometric detectors in terms of wide-band, background-limited sensitivity. The QUBIC synthesized beam has a frequency-dependent shape that results in the ability to produce maps of the CMB polarization in multiple sub-bands within the two physical bands of the instrument (150 and 220 GHz). These features make QUBIC complementary to other instruments and makes it particularly well suited to characterize and remove Galactic foreground contamination. In this article, first of a series of eight, we give an overview of the QUBIC instrument design, the main results of the calibration campaign, and present the scientific program of QUBIC including not only the measurement of primordial B-modes, but also the measurement of Galactic foregrounds. We give forecasts for typical observations and measurements: with three years of integration on the sky and assuming perfect foreground removal as well as stable atmospheric conditions from our site in Argentina, our simulations show that we can achieve a statistical sensitivity to the effective tensor-to-scalar ratio (including primordial and foreground B-modes) $σ(r)=0.015$.

astro-ph.IM↗

arXiv2021

QUBIC V: Cryogenic system design and performance

Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the mapping speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interferometer for Cosmology) experiment: we describe its design, fabrication, experimental optimization and validation in the Technological Demonstrator configuration. The QUBIC cryogenic system is based on a large volume cryostat, using two pulse-tube refrigerators to cool at ~3K a large (~1 m^3) volume, heavy (~165kg) instrument, including the cryogenic polarization modulator, the corrugated feedhorns array, and the lower temperature stages; a 4He evaporator cooling at ~1K the interferometer beam combiner; a 3He evaporator cooling at ~0.3K the focal-plane detector arrays. The cryogenic system has been tested and validated for more than 6 months of continuous operation. The detector arrays have reached a stable operating temperature of 0.33K, while the polarization modulator has been operated from a ~10K base temperature. The system has been tilted to cover the boresight elevation range 20 deg -90 deg without significant temperature variations. The instrument is now ready for deployment to the high Argentinean Andes.

astro-ph.IM↗

arXiv2021

QUBIC VIII: Optical design and performance

The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or planned experiments using the novel technique of bolometric interferometry. This technique takes advantage of the sensitivity of an imager and the systematic error control of an interferometer. A cold reflective optical combiner superimposes there-emitted beams from 400 aperture feedhorns on two focal planes. A shielding system composedof a fixed groundshield, and a forebaffle that moves with the instrument, limits the impact of local contaminants. The modelling, design, manufacturing and preliminary measurements of the optical components are described in this paper.

astro-ph.IM↗

arXiv2020

QUBIC VI: cryogenic half wave plate rotator, design and performances

Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used technique is the Stokes Polarimetry that uses a rotating half-wave plate (HWP) and a linear polarizer to separate and modulate the polarization components with low residual cross-polarization. This paper describes the QUBIC Stokes Polarimeter highlighting its design features and its performances. A common systematic with these devices is the generation of large spurious signals synchronous with the rotation and proportional to the emissivity of the optical elements. A key feature of the QUBIC Stokes Polarimeter is to operate at cryogenic temperature in order to minimize this unwanted component. Moving efficiently this large optical element at low temperature constitutes a big engineering challenge in order to reduce friction power dissipation. Big attention has been given during the designing phase to minimize the differential thermal contractions between parts. The rotation is driven by a stepper motor placed outside the cryostat to avoid thermal load dissipation at cryogenic temperature. The tests and the results presented in this work show that the QUBIC polarimeter can easily achieve a precision below 0.1° in positioning simply using the stepper motor precision and the optical absolute encoder. The rotation induces only few mK of extra power load on the second cryogenic stage (~ 8 K).

astro-ph.IM↗

arXiv2020

QUBIC: the Q & U Bolometric Interferometer for Cosmology

The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addresses these requirements using an innovative approach combining the sensitivity of Transition Edge Sensor cryogenic bolometers, with the deep control of systematics characteristic of interferometers. This makes QUBIC unique with respect to others classical imagers experiments devoted to the CMB polarization. In this contribution we report a description of the QUBIC instrument including recent achievements and the demonstration of the bolometric interferometry performed in lab. QUBIC will be deployed at the observation site in Alto Chorrillos, in Argentina at the end of 2019.

astro-ph.IM↗

arXiv2019

QUBIC: using NbSi TESs with a bolometric interferometer to characterize the polarisation of the CMB

QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detectors. QUBIC will be deployed in Argentina, at the Alto Chorrillos mountain site near San Antonio de los Cobres, in the Salta province. The QUBIC detection chain consists in 2048 NbSi Transition Edge Sensors (TESs) cooled to 350mK.The voltage-biased TESs are read out with Time Domain Multiplexing based on Superconducting QUantum Interference Devices (SQUIDs) at 1 K and a novel SiGe Application-Specific Integrated Circuit (ASIC) at 60 K allowing to reach an unprecedented multiplexing (MUX) factor equal to 128. The QUBIC experiment is currently being characterized in the lab with a reduced number of detectors before upgrading to the full instrument. I will present the last results of this characterization phase with a focus on the detectors and readout system.

astro-ph.IM↗

arXiv2019

Identification of RR Lyrae stars in multiband, sparsely-sampled data from the Dark Energy Survey using template fitting and Random Forest classification

Many studies have shown that RR Lyrae variable stars (RRL) are powerful stellar tracers of Galactic halo structure and satellite galaxies. The Dark Energy Survey (DES), with its deep and wide coverage (g ~ 23.5 mag) in a single exposure; over 5000 deg$^{2}$) provides a rich opportunity to search for substructures out to the edge of the Milky Way halo. However, the sparse and unevenly sampled multiband light curves from the DES wide-field survey (median 4 observations in each of grizY over the first three years) pose a challenge for traditional techniques used to detect RRL. We present an empirically motivated and computationally efficient template fitting method to identify these variable stars using three years of DES data. When tested on DES light curves of previously classified objects in SDSS stripe 82, our algorithm recovers 89% of RRL periods to within 1% of their true value with 85% purity and 76% completeness. Using this method, we identify 5783 RRL candidates, ~31% of which are previously undiscovered. This method will be useful for identifying RRL in other sparse multiband data sets.

astro-ph.SR↗

arXiv2019

Observation of excited states in $^{20}$Mg sheds light on nuclear forces and shell evolution

The exotic Borromean nucleus $^{20}$Mg with $N$ = 8, located at the proton drip-line provides a unique testing ground for nuclear forces and the evolution of shell structure in the neutron-deficient region. We report on the first observation of proton unbound resonances together with bound states in $^{20}$Mg from the $^{20}$Mg($d$,$d'$) reaction performed at TRIUMF. Phenomenological shell-model calculations offer a reasonable description. However, our experimental results present a challenge for current first-principles nuclear structure approaches and point to the need for improved chiral forces and {\it ab initio} calculations. Furthermore, the differential cross section of the first excited state is compared with distorted-wave Born approximation calculations to deduce a neutron quadrupole deformation parameter of $β_n$=0.46$\pm$0.21. This provides the first indication of a possible weakening of the $N$ = 8 shell closure at the proton drip-line.

nucl-ex↗