SearcharxivSearch

arXiv subjects

D. C. Gautier

Publications and source records attributed to D. C. Gautier.

7 recordsLinked to original sources

Diagnosing the impact of relativistically intense prepulse on few-picosecond timeframes for short scale length laser-matter interactions

With the rapid proliferation of multi-petawatt (MPW) lasers globally, a new era of high-energy density science promises to emerge within the next decade. However, precise control over how light at these ultra-relativistic intensities interacts with matter (especially with solid-density targets) will be crucial to fully realize the cutting-edge scientific advancements and technological breakthroughs that the MPW regime promises to unlock. In this manuscript, we present experimental results, supported by numerical simulations, which show how intense prepulse activity on few-ps ($10^{-12}$ s) timescales leads to rapid shifts in the steepness of the preplasma generated on the surface of ultra-thin nanofoil targets. By combining a single-shot frequency resolved optical gating (FROG) autocorrelation device to diagnose on-shot incident laser pulse contrast, with coherent synchrotron emission (CSE) from relativistic laser plasmas as a probe for evolving plasma-scale length conditions, we provide an experimental benchmark for laser contrast on forthcoming MPW facilities, where high contrast on few-ps timescales will be essential for the next generation of laser-solid interactions.

physics.plasm-ph

Measurement of BAS-TR imaging plate response to energetic aluminum ions

We measured the response of BAS-TR imaging plate (IP) to energetic aluminum ions in the 0 to 222 MeV energy range, and compared it with predictions from a Monte Carlo simulation code using two different IP models. Energetic aluminum ions were produced with an intense laser pulse, and the response was evaluated from cross-calibration between CR-39 track detector and IP energy spectrometer. For the first time, we obtained the response function of the BAS-TR IP for aluminum ions in the energy range from 0 to 222 MeV. Notably the IP sensitivity in the exponential model is nearly constant from 36 MeV to 160 MeV.

physics.ins-det

Single-Shot 60 dB Dynamic Range Laser Contrast Measurement Using Self-Referencing Spectral Interferometry

High dynamic range contrast measurement of laser pulses is typically obtained by cross-correlating the laser pulse with a self-generated reference laser pulse directly in the temporal domain. Alternatively, it is also possible to measure the spectral interferogram of the laser pulse with the references pulse in the spectral domain, from which the high dynamic range contrast measurement can be extracted using inverse Fourier-transformation. Here, we demonstrate single-shot 60 dB dynamic range laser contrast measurement by inverse Fourier-transforming the measured spectral interferogram into temporal domain. The result directly provides the cross-correlation of the laser pulse with the reference pulse provided there is enough time-delay imposed between the laser and reference pulses. Then method is cross-calibrated by measuring known pre-pulses along with scanning third-order auto-correlator measurements.

physics.optics

Scaling of laser-driven ion energies in the relativistic transparent regime

Laser-driven ions have compelling properties and their potential use for medical applications has attracted a huge global interest. One of the major challenges of these applications is generating beams of the required energies. To date, there has been no systematic study of the effect of laser intensity on the generation of laser-driven ions from ultrathin foils during relativistic transparency. Here we present a scaling for ion energies with respect to the on-target laser intensity and in considering target thickness we find an optimum thickness closely related to the experimentally observed relativistic transparency. A steep linear scaling with the normalized laser amplitude a0 has been measured and verified with PIC simulations. In contrast to TNSA, this scaling is much steeper and has been measured for ions with Z > 1. Following our results, ion energies exceeding 100MeV/amu are already accessible with currently available laser systems enabling realization of numerous advanced applications

physics.plasm-ph

160 MeV laser-accelerated protons from CH2 nano-targets for proton cancer therapy

Proton (and ion) cancer therapy has proven to be an extremely effective even supe-rior method of treatment for some tumors 1-4. A major problem, however, lies in the cost of the particle accelerator facilities; high procurement costs severely limit the availability of ion radiation therapy, with only ~26 centers worldwide. Moreover, high operating costs often prevent economic operation without state subsidies and have led to a shutdown of existing facilities 5,6. Laser-accelerated proton and ion beams have long been thought of as a way out of this dilemma, with the potential to provide the required ion beams at lower cost and smaller facility footprint 7-14. The biggest challenge has been the achievement of sufficient particle energy for therapy, in the 150-250 MeV range for protons 15,16. For the last decade, the maximum exper-imentally observed energy of laser-accelerated protons has remained at ~60 MeV 17. Here we the experimental demonstration of laser-accelerated protons to energies exceeding 150 MeV, reaching the therapy window. This was achieved through a dif-ferent acceleration regime rather than a larger laser, specifically a 150 TW laser with CH2 nano-targets in the relativistically transparent regime 18,19. We also demonstrate a clear scaling law with laser intensity based on analytical theory, computer simulations and experimental validation that will enable design of a pro-totype system spanning the full range of therapeutically desirable energies.

physics.plasm-ph

Status of Superconducting RF Linac Development for APT

This paper describes the development progress of high current superconducting RF linacs in Los Alamos, performed to support a design of the linac for the APT (Accelerator Production of Tritium) Project. The APT linac design includes a CW superconducting RF high energy section, spanning an energy range of 211 to 1030 MeV, and operating at a frequency of 700 MHz with two constant beta sections (beta of 0.64 and 0.82). In the last two years, we have progressed towards build a cryomodule with beta of 0.64. We completed the designs of the 5 cell superconducting cavities and the 210 kW power couplers. We are scheduled to begin assembly of the cryomodule in September 2000. In this paper, we present an overview of the status of our development efforts and a report on the results of the cavity and coupler test program.

physics.acc-ph

High-Power Testing of the APT Power Coupler

For the baseline APT (Accelerator Production of Tritium) linac design, power couplers are required to transmit 210-kW of CW RF power to the superconducting cavities. These APT couplers operate at 700 MHz, have a coaxial design and an adjustable coupling to the superconducting cavities. Since May 1999, we have been testing couplers of this design on a room-temperature test stand. We completed tests at transmitted-power and reflected-power conditions up to 1 MW. We also tested the couplers with a portion of the outer conductor cooled by liquid nitrogen. Under this latter condition, we studied the effects of condensed gases on coupler performance. The results of these tests indicate that the APT couplers are capable of delivering more than 500 kW to the cavities. We are in the process of increasing the baseline coupler design requirement to 420 kW of transmitted power to take advantage of this successful development. In this paper, we describe the results of our high-power coupler tests.

physics.acc-ph