arXiv subjects

D. Dancila

Publications and source records attributed to D. Dancila.

6 recordsLinked to original sources

arXiv2024

Decoherence in Neutrino Oscillation at the ESSnuSB Experiment

Neutrino oscillation experiments provide a unique window in exploring several new physics scenarios beyond the standard three flavour. One such scenario is quantum decoherence in neutrino oscillation which tends to destroy the interference pattern of neutrinos reaching the far detector from the source. In this work, we study the decoherence in neutrino oscillation in the context of the ESSnuSB experiment. We consider the energy-independent decoherence parameter and derive the analytical expressions for P$_{μe}$ and P$_{μμ}$ probabilities in vacuum. We have computed the capability of ESSnuSB to put bounds on the decoherence parameters namely, $Γ_{21}$ and $Γ_{32}$ and found that the constraints on $Γ_{21}$ are competitive compared to the DUNE bounds and better than the most stringent LBL ones from MINOS/MINOS+. We have also investigated the impact of decoherence on the ESSnuSB measurement of the Dirac CP phase $δ_{\rm CP}$ and concluded that it remains robust in the presence of new physics.

hep-ex↗

arXiv2024

Study of non-standard interaction mediated by a scalar field at ESSnuSB experiment

In this paper we study non-standard interactions mediated by a scalar field (SNSI) in the context of ESSnuSB experiment. In particular we study the capability of ESSnuSB to put bounds on the SNSI parameters and also study the impact of SNSI in the measurement of the leptonic CP phase $δ_{\rm CP}$. Existence of SNSI modifies the neutrino mass matrix and this modification can be expressed in terms of three diagonal real parameters ($η_{ee}$, $η_{μμ}$ and $η_{ττ}$) and three off-diagonal complex parameters ($η_{e μ}$, $η_{eτ}$ and $η_{μτ}$). Our study shows that the upper bounds on the parameters $η_{μμ}$, $η_{ττ}$ and $η_{μτ}$ depend upon how $Δm^2_{31}$ is minimized in the theory. However, this is not the case when one tries to measure the impact of SNSI on $δ_{\rm CP}$. Further, we show that the CP sensitivity of ESSnuSB can be completely lost for certain values of $η_{ee}$ and $η_{μτ}$ for which the appearance channel probability becomes independent of $δ_{\rm CP}$.

hep-ex↗

arXiv2024

Particle Physics at the European Spallation Source

Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world's brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons and neutrinos produced at the ESS for high precision (sensitivity) measurements (searches).

physics.ins-det↗

arXiv2023

The ESSnuSB design study: overview and future prospects

ESSnuSB is a design study for an experiment to measure the CP violation in the leptonic sector at the second neutrino oscillation maximum using a neutrino beam driven by the uniquely powerful ESS linear accelerator. The reduced impact of systematic errors on sensitivity at the second maximum allows for a very precise measurement of the CP violating parameter. This review describes the fundamental advantages of measurement at the 2nd maximum, the necessary upgrades to the ESS linac in order to produce a neutrino beam, the near and far detector complexes, the expected physics reach of the proposed ESSnuSB experiment, concluding with the near future developments aimed at the project realization.

hep-ex↗

arXiv2022

The European Spallation Source neutrino Super Beam Conceptual Design Report

This conceptual design report provides a detailed account of the European Spallation Source neutrino Super Beam (ESS$ν$SB) feasibility study. This facility has been proposed after the measurements reported in 2012 of a relatively large value of the neutrino mixing angle $θ_{13}$, which raised the possibility of observing potential CP violation in the leptonic sector with conventional neutrino beams. The measured value of $θ_{13}$ also privileges the $2^{nd}$ oscillation maximum for the discovery of CP violation instead of the more typically studied $1^{st}$ maximum. The sensitivity at this $2^{nd}$ oscillation maximum is about three times higher than at the $1^{st}$ one, which implies a reduced influence of systematic errors. Working at the $2^{nd}$ oscillation maximum requires a very intense neutrino beam with an appropriate energy. The world's most intense pulsed spallation neutron source, the European Spallation Source (ESS), will have a proton linac operating at 5\,MW power, 2\,GeV kinetic energy and 14~Hz repetition rate (3~ms pulse duration, 4\% duty cycle) for neutron production. In this design study it is proposed to double the repetition rate and compress the beam pulses to the level of microseconds in order to provide an additional 5~MW proton beam for neutrino production. The physics performance has been evaluated for such a neutrino super beam, in conjunction with a megaton-scale underground water Cherenkov neutrino detector installed at a distance of 360--550\,km from ESS. The ESS proton linac upgrades, the accumulator ring required for proton-pulse compression, the target station design and optimisation, the near and far detector complexes, and the physics potential of the facility are all described in this report. The ESS linac will be operational by 2025, at which point the implementation of upgrades for the neutrino facility could begin.

hep-ex↗

arXiv2021

Accelerator Development at the FREIA Laboratory

The FREIA Laboratory at Uppsala University focuses on superconducting technology and accelerator development. It actively supports the development of the European Spallation Source, CERN, and MAX IV, among others. FREIA has developed test facilities for superconducting accelerator technology such as a double-cavity horizontal test cryostat, a vertical cryostat with a novel magnetic field compensation scheme, and a test stand for short cryomodules. Accelerating cavities have been tested in the horizontal cryostat, crab-cavities in the vertical cryostat, and cryomodules for ESS on the cryomodule test stand. High power radio-frequency amplifier prototypes based on vacuum tube technology were developed for driving spoke cavities. Solid-state amplifiers and power combiners are under development for future projects. We present the status of the FREIA Laboratory complemented with results of recent projects and future prospects.

physics.acc-ph↗