arXiv subjects

D. De Salvador

Publications and source records attributed to D. De Salvador.

At least 19 recordsLinked to original sources

arXiv2026

From Simulation to Fabrication: Realizing Silicon Crystalline Undulators with Silicon Nitride Stressor Layer Patterning

A crystalline undulator is a crystal exhibiting periodic deformations that cause channeled particles to oscillate, generating coherent electromagnetic waves. In this study, stressor layer patterning has been employed to induce the desired deformations on a silicon substrate. Finite element method simulations were performed to optimize the geometric parameters of the undulator. The primary focus was on achieving sinusoidal deformation with sub-millimeter period and amplitude exceeding 1~nm, utilizing the silicon (110) plane for its superior channeling properties. Key parameters, such as substrate thickness and undulator period, were meticulously refined to ensure uniform deformation while minimizing the impact of higher harmonics, which could degrade performance. Based on the simulation results, a crystalline undulator, 160 $μ$m thick and consisting of 10 periods with a period length of 334 $μ$m, has been successfully fabricated. The final device demonstrates structural integrity and a uniform deformation extending up to 20 $μ$m from the surface. Specifically designed for use with 5-30 GeV particle beams, the undulator is capable of generating gamma photons in the 5-15 MeV range. This work effectively integrates advanced simulation techniques with precise fabrication methods, demonstrating the feasibility of crystalline undulators as high-performance devices for generating gamma radiation.

physics.acc-ph↗

arXiv2026

Beam Steering and Radiation Generation of Electrons in Bent Crystals in the Sub-GeV Domain

We present an investigation into beam steering and radiation emission by sub-GeV electrons traversing bent silicon crystals. Using 855, 600, and 300~MeV electron beams at the Mainz Microtron (MAMI), we explored orientational coherent effects and particle dynamics in a 15~$μ$m-thick crystal bent along the (111) planes. Combined experimental and simulation analyses enabled the classification and quantitative assessment of the contributions from channeling, dechanneling, rechanneling, and volume capture to both beam deflection and radiation emission. Crystal steering remained effective even at 300~MeV, with measured channeling efficiencies exceeding 50\%, a record at such low energy. Channeling and volume reflection enhanced radiation emission by up to a factor of six compared to the misaligned orientation, highlighting strong orientational coherence effects in the sub-GeV regime. These findings confirm the feasibility of using bent crystals for efficient beam manipulation and high-intensity photon generation at low energies, supporting the development of novel light sources and beam control strategies at accelerator facilities operating in this energy range.

physics.acc-ph↗

arXiv2025

Investigation of Radiation Emitted by Sub GeV Electrons in Oriented Scintillator Crystals

The research investigates coherent interactions between sub-GeV electrons and oriented scintillator crystals, leading to enhanced electromagnetic (EM) radiation. Experiments at Mainz Mikrotron (MAMI) involved PWO, BGO, and CsI crystals oriented along $\langle100\rangle$, $\langle111\rangle$, and $\langle100\rangle$ axes. Enhanced radiation emission was observed when the beam aligned with crystal axes, especially in BGO and CsI for the first time. These findings are crucial for innovative detectors using oriented crystal scintillators, amplifying EM processes along specific crystallographic directions. Potential applications include ultra-compact, highly sensitive electromagnetic calorimeters for high-energy physics and astroparticles, as well as high-performance gamma detectors for nuclear physics and medical imaging.

hep-ex↗

arXiv2025

Observation of Fine Structure in Channeling of Particles in Bent Crystals

We observed highly efficient manipulation of the 530 MeV positron beam at Mainz Microtron via bent crystals. The low beam divergence revealed a fine structure in the angular distribution of channeled particles. A compact analytical model, supported by Monte Carlo including multiple scattering, accounts for the measurements. We established a criterion for designing a crystal with reduced angular spread of channeled particles for beam manipulation at any energy. This finding is particularly useful in view of applications of channeling to the highest energies.

physics.acc-ph↗

arXiv2025

R&D on a high-performance electromagnetic calorimeter based on oriented crystalline scintillators

Although inorganic scintillators are widely used in the design of electromagnetic calorimeters for high-energy physics and astrophysics, their crystalline nature and, hence, their lattice orientation are generally neglected in the detector design. However, in general, the features of the electromagnetic field experienced by the particles impinging on a crystal at a small angle with respect to a lattice axis affect their interaction mechanisms. In particular, in case of electrons/photons of $\mathcal{O} (10~\mathrm{GeV})$ or higher impinging on a high-$Z$ crystal at an angle of $\lesssim 1~\mathrm{mrad}$, the so-called strong field regime is attained: the bremsstrahlung and pair production cross sections are enhanced with respect to the case of amorphous or randomly oriented materials. Overall, the increase of these processes leads to an acceleration of the electromagnetic shower development. These effects are thoroughly investigated by the OREO (ORiEnted calOrimeter) team, and pave the way to the development of innovative calorimeters with a higher energy resolution, a higher efficiency in photon detection and an improved particle identification capabilities due to the relative boost of the electromagnetic interactions with respect to the hadronic ones. Moreover, a detector with the same resolution as the current state of the art and reduced thickness could be developed. An overview of the lattice effects at the foundation of the shower boost and of the current status of the development of an operational calorimeter prototype are presented. This concept could prove pivotal for both accelerator fixed-target experiments and satellite-borne $γ$-ray observatories.

physics.ins-det↗

arXiv2025

A highly-compact and ultra-fast homogeneous electromagnetic calorimeter based on oriented lead tungstate crystals

Progress in high-energy physics has been closely tied to the development of highperformance electromagnetic calorimeters. Recent experiments have demonstrated the possibility to significantly accelerate the development of electromagnetic showers inside scintillating crystals typically used in homogeneous calorimeters based on scintillating crystals when the incident beam is aligned with a crystallographic axis to within a few mrad. In particular, a reduction of the radiation length has been measured when ultrarelativistic electron and photon beams were incident on a high-Z scintillator crystal along one of its main axes. Here, we propose the possibility to exploit this physical effect for the design of a new type of compact e.m. calorimeter, based on oriented ultrafast lead tungstate (PWO-UF) crystals, with a significant reduction in the depth needed to contain electromagnetic showers produced by high-energy particles with respect to the state-of-the-art. We report results from tests of the crystallographic quality of PWO-UF samples via high-resolution X-ray diffraction and photoelastic analysis. We then describe a proof-of-concept calorimeter geometry defined with a Geant4 model including the shower development in oriented crystals. Finally, we discuss the experimental techniques needed for the realization of a matrix of scintillator crystals oriented along a specific crystallographic direction. Since the angular acceptance for e.m. shower acceleration depends little on the particle energy, while the decrease of the shower length remains pronounced at very high energy, an oriented crystal calorimeter will open the way for applications at the maximum energies achievable in current and future experiments. Such applications span from forward calorimeters, to compact beam dumps for the search for light dark matter, to source-pointing space-borne γ-ray telescopes.

physics.ins-det↗

arXiv2025

Performance of short and long bent crystals for the TWOCRYST experiment at the Large Hadron Collider

This study investigates the performance of bent silicon crystals intended to channel hadrons in a fixed-target experiment at the Large Hadron Collider (LHC). The phenomenon of planar channelling in bent crystals enables extremely high effective bending fields for positively charged hadrons within compact volumes. Particles trapped in the potential well of high-purity, ordered atomic lattices follow the mechanical curvature of the crystal, resulting in macroscopic deflections. Although the bend angle remains constant across different momenta (i.e., the phenomenon is non-dispersive), the channelling acceptance and efficiency still depend on the particle momentum. Crystals with lengths from 5 cm to 10 cm, bent to angles between 5 mrad and 15 mrad, are under consideration for measurements of the electric and magnetic dipole moments of short-lived charmed baryons, such as the Lambda_c^+. Such large deflection angles over short distances cannot be achieved using conventional magnets. The principle of inducing spin precession through bent crystals for magnetic dipole moment measurements was first demonstrated in the 1990s. Building on this concept, experimental layouts are now being explored at the LHC. The feasibility of such measurements depends, among other factors, on the availability of crystals with the mechanical properties required to achieve the necessary channelling performance. To address this, a dedicated machine experiment, TWOCRYST, has been installed in the LHC to carry out beam tests in the TeV energy range. The bent crystals for TWOCRYST were fabricated and tested using X-ray diffraction and high-momentum hadron beams at 180 GeV/c at the CERN SPS. This paper presents an analysis of the performance of these newly developed crystals, as characterised by these measurements.

hep-ex↗

arXiv2025

Coherent radiation in axially oriented industrial-grade tungsten crystals: A viable path for an innovative γ-rays and positron sources

It is known that the alignment of an high-energy e- beam with specific crystal directions leads to a significant increase of the coherent radiation emission. This enhancement can be exploited to create an intense photon source. An elective application is an innovative positron source design for future lepton colliders. Such scheme takes advantage of lattice coherent effects by employing a high-Z crystalline radiator, followed by an amorphous metallic converter, to generate positrons via a two-step electromagnetic process. Additional applications can be in neutron production through photo-transmutation and radionuclide generation via photo-nuclear reactions. In this work, we present experimental results obtained from beam tests at CERN's PS facility using commercial industrial-grade tungsten crystals. The obtained results demonstrate the robust performance of industrial-grade radiators, even with their inherent imperfections, suggesting that it is possible to simplify the supply process and it is not strictly necessary to rely on highly specialized research infrastructures.

physics.acc-ph↗

arXiv2023

Strong enhancement of electromagnetic shower development induced by high-energy photons in a thick oriented tungsten crystal

We have observed a significant enhancement in the energy deposition by $25$--$100~\mathrm{GeV}$ photons in a $1~\mathrm{cm}$ thick tungsten crystal oriented along its $\langle 111 \rangle$ lattice axes. At $100~\mathrm{GeV}$, this enhancement, with respect to the value observed without axial alignment, is more than twofold. This effect, together with the measured huge increase in secondary particle generation is ascribed to the acceleration of the electromagnetic shower development by the strong axial electric field. The experimental results have been critically compared with a newly developed Monte Carlo adapted for use with crystals of multi-$X_0$ thickness. The results presented in this paper may prove to be of significant interest for the development of high-performance photon absorbers and highly compact electromagnetic calorimeters and beam dumps for use at the energy and intensity frontiers.

hep-ex↗

arXiv2022

HIKE, High Intensity Kaon Experiments at the CERN SPS

A timely and long-term programme of kaon decay measurements at a new level of precision is presented, leveraging the capabilities of the CERN Super Proton Synchrotron (SPS). The proposed programme is firmly anchored on the experience built up studying kaon decays at the SPS over the past four decades, and includes rare processes, CP violation, dark sectors, symmetry tests and other tests of the Standard Model. The experimental programme is based on a staged approach involving experiments with charged and neutral kaon beams, as well as operation in beam-dump mode. The various phases will rely on a common infrastructure and set of detectors.

hep-ex↗

arXiv2022

Crystal-based pair production for a lepton collider positron source

An intense positron sources is a demanding element in the design of future lepton colliders. A crystal-based hybrid positron source could be an alternative to a more conventional scheme based on the electron conversion into positron in a thick amorphous target. The conceptual idea of the hybrid source is to have two separate objects, a photon radiator and a photon-to-positron converter target. In such a scheme an electron beam crosses a thin axially oriented crystal with the emission of a channeling radiation, characterized by a considerably larger amount of photons if compared to Bremsstrahlung. The net result is an increase in the number of produced positrons at the converter target. In this paper we present the results of a beam test conducted at the DESY TB 21 with 5.6 GeV electron beam and a crystalline tungsten radiator. Experimental data clearly highlight an increased production of photons and they are critically compared with the outcomes of novel method to simulate the number of radiated photons, showing a very good agreement. Strong of this, the developed simulation tool has been exploited to design a simple scheme for a positron source based on oriented crystal, demonstrating the advantages in terms of reduction of both deposited energy and the peak energy deposition density if compared to conventional sources. The presented work opens the way for a realistic and detailed design of a hybrid crystal-based positron source for future lepton colliders.

physics.acc-ph↗

arXiv2020

Investigation on radiation generated by Sub-GeV electrons in ultrashort Si and Ge bent crystals

We report on the measurements of the spectra of gamma radiation generated by 855 MeV electrons in bent silicon and germanium crystals at MAMI (MAinzer MIkrotron). The crystals were 15 μm thick along the beam direction to ensure high deflection efficiency. Their (111) crystalline planes were bent by means of a piezo-actuated mechanical holder, which allowed to remotely change the crystal curvature. In such a way it was possible to investigate the radiation emitted under planar channeling and volume reflection as a function of the curvature of the crystalline planes. We show that using volume reflection, one can produce intense gamma radiation with comparable intensity but higher angular acceptance than for channeling. We studied the trade-off between radiation intensity and angular acceptance at different values of the crystal curvature. The measurements of radiation spectra have been carried out for the first time in bent Germanium crystals. In particular, the intensity of radiation in the Ge crystal is higher than in the Si one due to the higher atomic number, which is important for the development of the X-ray and gamma radiation sources based on higher-Z deformed crystals, such as crystalline undulator.

physics.acc-ph↗

arXiv2020

Investigation on steering of ultrarelativistic $e^{\pm}$ beam through an axially oriented bent crystal

An investigation on stochastic deflection of high-energy charged particles in a bent crystal was carried out. In particular, we investigated the deflection efficiency under axial confinement of both positively and negatively charged particles as a function of the crystal orientation, the choice of the bending plane, and of the charge sign. Analytic estimations and numerical simulations were compared with dedicated experiments at the H4 secondary beam line of SPS North Area, with 120 GeV/$c$ electrons and positrons. In the work presented in this article, the optimal orientations of the plane of bending of the crystal, which allow deflecting the largest number of charged particles using a bent crystal in axial orientation, were found.

physics.acc-ph↗

arXiv2020

Silicon crystals for steering of high-intensity particle beams at ultra-high energy accelerators

Experimental results and simulation models show that crystals might play a relevant role for the development of new generations of high-energy and high-intensity particle accelerators and might disclose innovative possibilities at existing ones. In this paper we describe the most advanced manufacturing techniques of crystals suitable for operations at ultra-high energy and ultra-high intensity particle accelerators, reporting as an example of potential applications the collimation of the particle beams circulating in the Large Hadron Collider at CERN, which will be upgraded through the addition of bent crystals in the frame of the High Luminosity Large Hadron Collider project.

physics.acc-ph↗

arXiv2020

Innovative remotely-controlled bending device for thin silicon and germanium crystals

Steering of negatively charged particle beams below 1 GeV has demonstrated to be possible with thin bent silicon and germanium crystals. A newly designed mechanical holder was used for bending crystals, since it allows a remotely-controlled adjustment of crystal bending and compensation of unwanted torsion. Bent crystals were installed and tested at the MAMI Mainz MIcrotron to achieve steering of 0.855-GeV electrons at different bending radii. We report the description and characterization of the innovative bending device developed at INFN Laboratori Nazionali di Legnaro (LNL).

physics.ins-det↗

arXiv2019

Broad angular anisotropy of multiple scattering in a Si crystal

We observed reduction of multiple Coulomb scattering of 855 MeV electrons within a Si crystalline plate w.r.t. an amorphous plate with the same mass thickness. The reduction owed to complete or partial suppression of the coherent part of multiple scattering in a crystal vs crystal orientation with the beam. Experimental data were collected at Mainz Mikrotron and critically compared to theoretical predictions and Monte Carlo simulations. Our results highlighted maximal 7 % reduction of the r.m.s. scattering angle at certain beam alignment with the [100] crystal axes. However, partial reduction was recorded over a wide range of alignment of the electron beam with the crystal up to 15 deg. This evidence may be relevant to refine the modelling of multiple scattering in crystals for currently used software, which is interesting for detectors in nuclear, medical, high energy physics.

physics.acc-ph↗

arXiv2019

KLEVER: An experiment to measure BR($K_L\toπ^0ν\barν$) at the CERN SPS

Precise measurements of the branching ratios for the flavor-changing neutral current decays $K\toπν\barν$ can provide unique constraints on CKM unitarity and, potentially, evidence for new physics. It is important to measure both decay modes, $K^+\toπ^+ν\barν$ and $K_L\toπ^0ν\barν$, since different new physics models affect the rates for each channel differently. The goal of the NA62 experiment at the CERN SPS is to measure the BR for the charged channel to within 10%. For the neutral channel, the BR has never been measured. We are designing the KLEVER experiment to measure BR($K_L\toπ^0ν\barν$) to $\sim$20% using a high-energy neutral beam at the CERN SPS starting in LHC Run 4. The boost from the high-energy beam facilitates the rejection of background channels such as $K_L\toπ^0π^0$ by detection of the additional photons in the final state. On the other hand, the layout poses particular challenges for the design of the small-angle vetoes, which must reject photons from $K_L$ decays escaping through the beam exit amidst an intense background from soft photons and neutrons in the beam. Background from $Λ\to nπ^0$ decays in the beam must also be kept under control. We present findings from our design studies for the beamline and experiment, with an emphasis on the challenges faced and the potential sensitivity for the measurement of BR($K_L\toπ^0ν\barν$).

hep-ex↗

arXiv2018

Strong reduction of the effective radiation length in an axially oriented scintillator crystal

We measured a considerable increase of the emitted radiation by 120 GeV/c electrons in an axially oriented lead tungstate scintillator crystal, if compared to the case in which the sample was not aligned with the beam direction. This enhancement resulted from the interaction of particles with the strong crystalline electromagnetic field. The data collected at the external lines of CERN SPS were critically compared to Monte Carlo simulations based on the Baier Katkov quasiclassical method, highlighting a reduction of the scintillator radiation length by a factor of five in case of beam alignment with the [001] crystal axes. The observed effect opens the way to the realization of compact electromagnetic calorimeters/detectors based on oriented scintillator crystals in which the amount of material can be strongly reduced with respect to the state of the art. These devices could have relevant applications in fixed-target experiments as well as in satellite-borne gamma-telescopes.

physics.ins-det↗