arXiv subjects

D. Gao

Publications and source records attributed to D. Gao.

9 recordsLinked to original sources

arXiv2022

Input optics systems of the KAGRA detector during O3GK

KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensity and frequency stabilization systems, modulators, a Faraday isolator, mode-matching telescopes, and a high-power beam dump. These optics were successfully delivered to the KAGRA interferometer and operated stably during the observations. The laser frequency noise was observed to limit the detector sensitivity above a few kHz, whereas the laser intensity did not significantly limit the detector sensitivity.

gr-qc↗

arXiv2022

Noise subtraction from KAGRA O3GK data using Independent Component Analysis

In April 2020, KAGRA conducted its first science observation in combination with the GEO~600 detector (O3GK) for two weeks. According to the noise budget estimation, suspension control noise in the low frequency band and acoustic noise in the middle frequency band are identified as the dominant contribution. In this study, we show that such noise can be reduced in offline data analysis by utilizing a method called Independent Component Analysis (ICA). Here the ICA model is extended from the one studied in iKAGRA data analysis by incorporating frequency dependence while linearity and stationarity of the couplings are still assumed. By using optimal witness sensors, those two dominant contributions are mitigated in the real observational data. We also analyze the stability of the transfer functions for whole two weeks data in order to investigate how the current subtraction method can be practically used in gravitational wave search.

astro-ph.IM↗

arXiv2022

Performance of the KAGRA detector during the first joint observation with GEO 600 (O3GK)

KAGRA, the kilometer-scale underground gravitational-wave detector, is located at Kamioka, Japan. In April 2020, an astrophysics observation was performed at the KAGRA detector in combination with the GEO 600 detector; this observation operation is called O3GK. The optical configuration in O3GK is based on a power recycled Fabry-Pérot Michelson interferometer; all the mirrors were set at room temperature. The duty factor of the operation was approximately 53%, and the strain sensitivity was $3\times10^{-22}~/\sqrt{\rm{Hz}}$ at 250 Hz. In addition, the binary-neutron-star (BNS) inspiral range was approximately 0.6 Mpc. The contributions of various noise sources to the sensitivity of O3GK were investigated to understand how the observation range could be improved; this study is called a "noise budget". According to our noise budget, the measured sensitivity could be approximated by adding up the effect of each noise. The sensitivity was dominated by noise from the sensors used for local controls of the vibration isolation systems, acoustic noise, shot noise, and laser frequency noise. Further, other noise sources that did not limit the sensitivity were investigated. This paper provides a detailed account of the KAGRA detector in O3GK including interferometer configuration, status, and noise budget. In addition, strategies for future sensitivity improvements such as hardware upgrades, are discussed.

astro-ph.IM↗

arXiv2021

Overview of KAGRA: Calibration, detector characterization, physical environmental monitors, and the geophysics interferometer

KAGRA is a newly built gravitational wave observatory, a laser interferometer with a 3 km arm length, located in Kamioka, Gifu, Japan. In this series of articles, we present an overview of the baseline KAGRA, for which we finished installing the designed configuration in 2019. This article describes the method of calibration (CAL) used for reconstructing gravitational wave signals from the detector outputs, as well as the characterization of the detector (DET). We also review the physical environmental monitors (PEM) system and the geophysics interferometer (GIF). Both are used for characterizing and evaluating the data quality of the gravitational wave channel. They play important roles in utilizing the detector output for gravitational wave searches. These characterization investigations will be even more important in the near future, once gravitational wave detection has been achieved, and in using KAGRA in the gravitational wave astronomy era.

gr-qc↗

arXiv2020

Overview of KAGRA : KAGRA science

KAGRA is a newly build gravitational-wave observatory, a laser interferometer with 3 km arm length, located in Kamioka, Gifu, Japan. In this paper in the series of KAGRA-featured articles, we discuss the science targets of KAGRA projects, considering not only the baseline KAGRA (current design) but also its future upgrade candidates (KAGRA+) for the near to middle term (~5 years).

gr-qc↗

arXiv2013

Interplanetary spacecraft navigation using pulsars

We demonstrate how observations of pulsars can be used to help navigate a spacecraft travelling in the solar system. We make use of archival observations of millisecond pulsars from the Parkes radio telescope in order to demonstrate the effectiveness of the method and highlight issues, such as pulsar spin irregularities, which need to be accounted for. We show that observations of four millisecond pulsars every seven days using a realistic X-ray telescope on the spacecraft throughout a journey from Earth to Mars can lead to position determinations better than approx. 20km and velocity measurements with a precision of approx. 0.1m/s.

astro-ph.IM↗

arXiv2010

A large sample of low surface brightness disc galaxies from the SDSS- II. Metallicities in surface brightness bins

We study the spectroscopic properties of a large sample of Low Surface Brightness galaxies (LSBGs) (with B-band central surface brightness mu0(B)>22 mag arcsec^(-2)) selected from the Sloan Digital Sky Survey Data Release 4 (SDSS-DR4) main galaxy sample. A large sample of disk-dominated High Surface Brightness galaxies (HSBGs, with mu0(B)<22 mag arcsec^(-2)) are also selected for comparison simultaneously. To study them in more details, these sample galaxies are further divided into four subgroups according to mu0(B) (in units of mag arcsec^(-2)): vLSBGs (24.5-22.75),iLSBGs (22.75-22.0), iHSBGs (22.0-21.25), and vHSBGs (<21.25). The diagnostic diagram from spectral emission-line ratios shows that the AGN fractions of all the four subgroups are small (<9%). The 21,032 star-forming galaxies with good quality spectroscopic observations are further selected for studying their dust extinction, strong-line ratios, metallicities and stellar mass-metallicities relations. The vLSBGs have lower extinction values and have less metal-rich and massive galaxies than the other subgroups. The oxygen abundances of our LSBGs are not as low as those of the HII regions in LSBGs studied in literature, which could be because our samples are more luminous, and because of the different metallicity calibrations used. We find a correlation between 12+log(O/H) and mu0(B) for vLSBGs, iLSBGs and iHSBGs but show that this could be a result of correlation between mu0(B) and stellar mass and the well-known mass-metallicity relation. This large sample shows that LSBGs span a wide range in metallicity and stellar mass, and they lie nearly on the stellar mass vs. metallicity and N/O vs. O/H relations of normal galaxies. This suggests that LSBGs and HSBGs have not had dramatically different star formation and chemical enrichment histories.

astro-ph.CO↗

arXiv2009

The properties of a large sample of low surface brightness galaxies from SDSS

A large sample of low surface brightness (LSB) disk galaxies is selected from SDSS with B-band central surface brightness mu_0(B) from 22 to 24.5 mag arcsec^(-2). Some of their properties are studied, such as magnitudes, surface brightness, scalelengths, colors, metallicities, stellar populations, stellar masses and multiwavelength SEDs from UV to IR etc. These properties of LSB galaxies have been compared with those of the galaxies with higher surface brightnesses. Then we check the variations of these properties following surface brightness.

astro-ph.CO↗

arXiv2007

Decision table for classifying point sources based on FIRST and 2MASS databases

With the availability of multiwavelength, multiscale and multiepoch astronomical catalogues, the number of features to describe astronomical objects has increases. The better features we select to classify objects, the higher the classification accuracy is. In this paper, we have used data sets of stars and quasars from near infrared band and radio band. Then best-first search method was applied to select features. For the data with selected features, the algorithm of decision table was implemented. The classification accuracy is more than 95.9%. As a result, the feature selection method improves the effectiveness and efficiency of the classification method. Moreover the result shows that decision table is robust and effective for discrimination of celestial objects and used for preselecting quasar candidates for large survey projects.

astro-ph↗