arXiv subjects
Publications and source records attributed to D. Guéry-Odelin.
We design optimal trajectories to transport cold atoms in anharmonic traps, combining invariant-based inverse engineering, perturbation theory, and optimal control theory. The anharmonic perturbation energy is minimized constraining the maximally allowed relative displacement between the trap center and the atom.
Quantum adiabatic processes -that keep constant the populations in the instantaneous eigenbasis of a time-dependent Hamiltonian- are very useful to prepare and manipulate states, but take typically a long time. This is often problematic because decoherence and noise may spoil the desired final state, or because some applications require many repetitions. "Shortcuts to adiabaticity" are alternative fast processes which reproduce the same final populations, or even the same final state, as the adiabatic process in a finite, shorter time. Since adiabatic processes are ubiquitous, the shortcuts span a broad range of applications in atomic, molecular and optical physics, such as fast transport of ions or neutral atoms, internal population control and state preparation (for nuclear magnetic resonance or quantum information), cold atom expansions and other manipulations, cooling cycles, wavepacket splitting, and many-body state engineering or correlations microscopy. Shortcuts are also relevant to clarify fundamental questions such as a precise quantification of the third principle of thermodynamics and quantum speed limits. We review different theoretical techniques proposed to engineer the shortcuts, the experimental results, and the prospects.
Sending multiple messages on qubits encoded in different vibrational modes of cold atoms or ions along a transmission waveguide requires to merge first and then separate the modes at input and output ends. Similarly, different qubits can be stored in the modes of a trap and be separated later. We design the fast splitting of a harmonic trap into an asymmetric double well so that the initial ground vibrational state becomes the ground state of one of two final wells, and the initial first excited state becomes the ground state of the other well. This might be done adiabatically by slowly deforming the trap. We speed up the process by inverse engineering a double-function trap using dynamical invariants. The separation (demultiplexing) followed by an inversion of the asymmetric bias and then by the reverse process (multiplexing) provides a population inversion protocol based solely on trap reshaping.
We design fast bias inversions of an asymmetric double well so that the lowest states in each well remain so and free from residual motional excitation. This cannot be done adiabatically, and a sudden bias switch produces in general motional excitation. The residual excitation is suppressed by complementing a predetermined fast bias change with a linear ramp whose time-dependent slope compensates for the displacement of the wells. The process, combined with vibrational multiplexing and demultiplexing, can produce vibrational state inversion without exciting internal states, just by deforming the trap.
We study the evolution of an initially confined atom condensate which is progressively outcoupled by gradually lowering the confining barrier on one side. The goal is to identify protocols that best lead to a quasi-stationary sonic black hole separating regions of subsonic and supersonic flow. An optical lattice is found to be more efficient than a single barrier in yielding a long-time stationary flow. This is best achieved if the final conduction band is broad and its minimum not much lower than the initial chemical potential. An optical lattice with a realistic Gaussian envelope yields similar results. We analytically prove and numerically check that, within a spatially coarse-grained description, the sonic horizon is bound to lie right at the envelope maximum. We derive an analytical formula for the Hawking temperature in that setup.
We study the fast transport of a particle or a Bose-Einstein condensate in a harmonic potential. An exact expression for the final excitation energy in terms of the Fourier transform of the trap acceleration is used to engineer optimal transport protocols (with no final excitation) that are robust with respect to spring-constant errors. The same technique provides a way to design the simultaneous and robust transport of a few non-interacting species that experience different harmonic trap frequencies in the same trap.
We explore the manipulation in phase space of many-body wavefunctions that exhibit self-similar dynamics, under the application of sudden force and/or in the presence of a constant acceleration field. For this purpose, we work out a common theoretical framework based on the Wigner function. We discuss squeezing in position space, phase space rotation and its implications in cooling for both non-interacting and interacting gases, and time reversal operation. We discuss various optical analogies and calculate the role of spherical-like aberration in cooling protocols. We also present the equivalent of a spin-echo technique to improve the robustness of velocity dispersion reduction protocols.
We construct a novel class of exact solutions to the Boltzmann equation, in both its classical and quantum formulation, for arbitrary collision laws. When the system is subjected to a specific external forcing, the precise form of which is worked out, non equilibrium damping-less solutions are admissible. They do not contradict the $H$-theorem, but are constructed from its requirements. Interestingly, these solutions hold for time-dependent confinement. We exploit them, in a reverse-engineering perspective, to work out a protocol that shortcuts any adiabatic transformation between two equilibrium states in an arbitrarily short time-span, for an interacting system. Particle simulations of the direct Monte Carlo type fully corroborate the analytical predictions.
We design fast trajectories of a trap to transport two ions using a shortcut-to-adiabaticity technique based on invariants. The effects of anharmonicity are analyzed first perturbatively, with an approximate, single relative-motion mode, description. Then we use classical calculations and full quantum calculations. This allows to identify discrete transport times that minimize excitation in the presence of anharmonicity. An even better strategy to suppress the effects of anharmonicity in a continuous range of transport times is to modify the trajectory using an effective trap frequency shifted with respect to the actual frequency by the coupling between relative and center of mass motions.
We study fast expansions of cold atoms in a three-dimensional Gaussian-beam optical trap. Three different methods to avoid final motional excitation are compared: inverse engineering using Lewis-Riesenfeld invariants, which provides the best overall performance, a bang-bang approach, and a fast adiabatic approach. We analyze the excitation effect of anharmonic terms, radial-longitudinal coupling, and radial-frequency mismatch. In the inverse engineering approach these perturbations can be suppressed or mitigated by increasing the laser beam waist.
Ultrachirped pulses for which the frequency chirp is of the order of the transition frequency of a two-level atom are examined. When the chirp is large enough, the resonance may be crossed twice, for positive and negative quadrature frequencies. In this scenario the analytic signal and quadrature decompositions of the field into amplitude and phase factors turn out to be quite different. The corresponding interaction pictures are strictly equivalent, but only as long as approximations are not applied. The domain of validity of the formal rotating wave approximation is dramatically enhanced using the analytic signal representation.
We describe a simple Zeeman slower design using permanent magnets. Contrary to common wire-wound setups no electric power and water cooling are required. In addition, the whole system can be assembled and disassembled at will. The magnetic field is however transverse to the atomic motion and an extra repumper laser is necessary. A Halbach configuration of the magnets produces a high quality magnetic field and no further adjustment is needed. After optimization of the laser parameters, the apparatus produces an intense beam of slow and cold 87Rb atoms. With a typical flux of 1 - 5 \times 10^10 atoms/s at 30 ms^-1, our apparatus efficiently loads a large magneto-optical trap with more than 10^10 atoms in one second, which is an ideal starting point for degenerate quantum gases experiments.
We study the scaling and coordinate transformation to physically simulate quantum three-body collinear chemical reactions of the type A+BC $\rightarrow$ AB+C by the motion of single ultracold atoms or a weakly interacting Bose-Einstein condensate on an $L$-shaped waveguide. As an example we show that the parameters to model the reaction F+HH $\to$ H+HF with lithium are at reach with current technology. This mapping provides also an inverse scattering tool to find an unknown potential, and a way to transfer the knowledge on molecular reaction dynamics to design beam splitters for cold atoms with control of the channel outcome and vibrational excitation.
We use the dynamical invariants associated with the Hamiltonian of an atom in a one dimensional moving trap to inverse engineer the trap motion and perform fast atomic transport without final vibrational heating. The atom is driven non-adiabatically through a shortcut to the result of adiabatic, slow trap motion. For harmonic potentials this only requires designing appropriate trap trajectories, whereas perfect transport in anharmonic traps may be achieved by applying an extra field to compensate the forces in the rest frame of the trap. The results can be extended to atom stopping or launching. The limitations due to geometrical constraints, energies and accelerations involved are analyzed, as well as the relation to previous approaches (based on classical trajectories or "fast-forward" and "bang-bang" methods) which can be integrated in the invariant-based framework.
We study the dynamics of neutral cold atoms in an $L$-shaped crossed-beam optical waveguide formed by two perpendicular red-detuned lasers of different intensities and a blue-detuned laser at the corner. Complemented with a vibrational cooling process this setting works as a one-way device or "atom diode".
We report on our recent progress in the manipulation and cooling of a magnetically guided, high flux beam of $^{87}{\rm Rb}$ atoms. Typically $7\times 10^9$ atoms per second propagate in a magnetic guide providing a transverse gradient of 800 G/cm, with a temperature $\sim550$ $μ$K, at an initial velocity of 90 cm/s. The atoms are subsequently slowed down to $\sim 60$ cm/s using an upward slope. The relatively high collision rate (5 s$^{-1}$) allows us to start forced evaporative cooling of the beam, leading to a reduction of the beam temperature by a factor of ~4, and a ten-fold increase of the on-axis phase-space density.
By means of a scaling ansatz, we investigate an approximated solution of the Boltzmann-Vlasov equation for a classical gas. Within this framework, we derive the frequencies and the damping of the collective oscillations of a harmonically trapped gas and we investigate its expansion after release of the trap. The method is well suited to studying the collisional effects taking place in the system and in particular to discussing the crossover between the hydrodynamic and the collisionless regimes. An explicit link between the relaxation times relevant for the damping of the collective oscillations and for the expansion is established.
We report the continuous or pulsed loading of a slow and cold atomic beam into a magnetic guide. In order to optimize the transfer into the guide, we have studied two coupling schemes. The first one is based on an auxiliary two-dimensional MOT that confines the atoms transversally before they enter the guide. However, for low atomic velocities, the atoms are strongly heated in the longitudinal direction. This limitation does not occur in the second coupling scheme which relies on magnetic confinement in the transfer zone. For this purpose, we have constructed a miniature magnetic guide located between the atomic source and the long magnetic guide. The latter scheme allows to inject atoms with velocities down to 70 cm/s into the guide.