arXiv subjects

D. J. Reardon

Publications and source records attributed to D. J. Reardon.

At least 37 records · Page 2Linked to original sources

arXiv2022

Modelling annual scintillation arc variations in PSR J1643-1224 using the Large European Array for Pulsars

In this work we study variations in the parabolic scintillation arcs of the binary millisecond pulsar PSR J1643-1224 over five years using the Large European Array for Pulsars (LEAP). The 2D power spectrum of scintillation, called the secondary spectrum, often shows a parabolic distribution of power, where the arc curvature encodes the relative velocities and distances of the pulsar, ionised interstellar medium (IISM), and Earth. We observe a clear parabolic scintillation arc which varies in curvature throughout the year. The distribution of power in the secondary spectra are inconsistent with a single scattering screen which is fully 1D, or entirely isotropic. We fit the observed arc curvature variations with two models; an isotropic scattering screen, and a model with two independent 1D screens. We measure the distance to the scattering screen to be in the range 114-223 pc, depending on the model, consistent with the known distance of the foreground large-diameter HII region Sh 2-27 (112+/-17 pc), suggesting that it is the dominant source of scattering. We obtain only weak constraints on the pulsar's orbital inclination and angle of periastron, since the scintillation pattern is not very sensitive to the pulsar's motion, since the screen is much closer to the Earth than the pulsar. More measurements of this kind - where scattering screens can be associated with foreground objects - will help to inform the origins and distribution of scattering screens within our galaxy.

astro-ph.HE↗

arXiv2021

The Thousand-Pulsar-Array programme on MeerKAT: -- VI. Pulse widths of a large and diverse sample of radio pulsars

We present pulse width measurements for a sample of radio pulsars observed with the MeerKAT telescope as part of the Thousand-Pulsar-Array (TPA) programme in the MeerTime project. For a centre frequency of 1284 MHz, we obtain 762 $W_{10}$ measurements across the total bandwidth of 775 MHz, where $W_{10}$ is the width at the 10% level of the pulse peak. We also measure about 400 $W_{10}$ values in each of the four or eight frequency sub-bands. Assuming, the width is a function of the rotation period P, this relationship can be described with a power law with power law index $μ=-0.29\pm 0.03$. However, using orthogonal distance regression, we determine a steeper power law with $μ=-0.63\pm 0.06$. A density plot of the period-width data reveals such a fit to align well with the contours of highest density. Building on a previous population synthesis model, we obtain population-based estimates of the obliquity of the magnetic axis with respect to the rotation axis for our pulsars. Investigating the width changes over frequency, we unambiguously identify a group of pulsars that have width broadening at higher frequencies. The measured width changes show a monotonic behaviour with frequency for the whole TPA pulsar population, whether the pulses are becoming narrower or broader with increasing frequency. We exclude a sensitivity bias, scattering and noticeable differences in the pulse component numbers as explanations for these width changes, and attempt an explanation using a qualitative model of five contributing Gaussian pulse components with flux density spectra that depend on their rotational phase.

astro-ph.HE↗

arXiv2021

On the evidence for a common-spectrum process in the search for the nanohertz gravitational-wave background with the Parkes Pulsar Timing Array

A nanohertz-frequency stochastic gravitational-wave background can potentially be detected through the precise timing of an array of millisecond pulsars. This background produces low-frequency noise in the pulse arrival times that would have a characteristic spectrum common to all pulsars and a well-defined spatial correlation. Recently the North American Nanohertz Observatory for Gravitational Waves collaboration (NANOGrav) found evidence for the common-spectrum component in their 12.5-year data set. Here we report on a search for the background using the second data release of the Parkes Pulsar Timing Array. If we are forced to choose between the two NANOGrav models $\unicode{x2014}$ one with a common-spectrum process and one without $\unicode{x2014}$ we find strong support for the common-spectrum process. However, in this paper, we consider the possibility that the analysis suffers from model misspecification. In particular, we present simulated data sets that contain noise with distinctive spectra but show strong evidence for a common-spectrum process under the standard assumptions. The Parkes data show no significant evidence for, or against, the spatially correlated Hellings-Downs signature of the gravitational-wave background. Assuming we did observe the process underlying the spatially uncorrelated component of the background, we infer its amplitude to be $A = 2.2^{+0.4}_{-0.3} \times 10^{-15}$ in units of gravitational-wave strain at a frequency of $1\, \text{yr}^{-1}$. Extensions and combinations of existing and new data sets will improve the prospects of identifying spatial correlations that are necessary to claim a detection of the gravitational-wave background.

astro-ph.HE↗

arXiv2021

The Parkes pulsar timing array second data release: Timing analysis

The main goal of pulsar timing array experiments is to detect correlated signals such as nanohertz-frequency gravitational waves. Pulsar timing data collected in dense monitoring campaigns can also be used to study the stars themselves, their binary companions, and the intervening ionised interstellar medium. Timing observations are extraordinarily sensitive to changes in path length between the pulsar and the Earth, enabling precise measurements of the pulsar positions, distances and velocities, and the shapes of their orbits. Here we present a timing analysis of 25 pulsars observed as part of the Parkes Pulsar Timing Array (PPTA) project over time spans of up to 24 yr. The data are from the second data release of the PPTA, which we have extended by including legacy data. We make the first detection of Shapiro delay in four Southern pulsars (PSRs J1017$-$7156, J1125$-$6014, J1545$-$4550, and J1732$-$5049), and of parallax in six pulsars. The prominent Shapiro delay of PSR J1125$-$6014 implies a neutron star mass of $M_p = 1.5 \pm 0.2 M_\odot$ (68% credibility interval). Measurements of both Shapiro delay and relativistic periastron advance in PSR J1600$-$3053 yield a large but uncertain pulsar mass of $M_p = 2.06^{+0.44}_{-0.41}$ M$_\odot$ (68% credibility interval). We measure the distance to PSR J1909$-$3744 to a precision of 10 lyr, indicating that for gravitational wave periods over a decade, the pulsar provides a coherent baseline for pulsar timing array experiments.

astro-ph.HE↗

arXiv2021

The Relativistic Binary Programme on MeerKAT: Science objectives and first results

We describe the ongoing Relativistic Binary programme (RelBin), a part of the MeerTime large survey project with the MeerKAT radio telescope. RelBin is primarily focused on observations of relativistic effects in binary pulsars to enable measurements of neutron star masses and tests of theories of gravity. We selected 25 pulsars as an initial high priority list of targets based on their characteristics and observational history with other telescopes. In this paper, we provide an outline of the programme, present polarisation calibrated pulse profiles for all selected pulsars as a reference catalogue along with updated dispersion measures. We report Faraday rotation measures for 24 pulsars, twelve of which have been measured for the first time. More than a third of our selected pulsars show a flat position angle swing confirming earlier observations. We demonstrate the ability of the Rotating Vector Model (RVM), fitted here to seven binary pulsars, including the Double Pulsar (PSR J0737$-$3039A), to obtain information about the orbital inclination angle. We present a high time resolution light curve of the eclipse of PSR J0737$-$3039A by the companion's magnetosphere, a high-phase resolution position angle swing for PSR J1141$-$6545, an improved detection of the Shapiro delay of PSR J1811$-$2405, and pulse scattering measurements for PSRs J1227$-$6208, J1757$-$1854, and J1811$-$1736. Finally, we demonstrate that timing observations with MeerKAT improve on existing data sets by a factor of, typically, 2-3, sometimes by an order of magnitude.

astro-ph.HE↗

arXiv2021

The Thousand-Pulsar-Array programme on MeerKAT -- V. Scattering analysis of single-component pulsars

We have measured the scattering timescale, $τ$, and the scattering spectral index, $α$, for 84 single-component pulsars. Observations were carried out with the MeerKAT telescope as part of the Thousand-Pulsar-Array programme in the MeerTime project at frequencies between 0.895 and 1.670 GHz. Our results give a distribution of values for $α$ (defined in terms of $τ$ and frequency $ν$ as $τ\proptoν^{-α}$) for which, upon fitting a Gaussian, we obtain a mean and standard deviation of $\langleα\rangle = 4.0 \pm 0.6$. This is due to our identification of possible causes of inaccurate measurement of $τ$, which, if not filtered out of modelling results, tend to lead to underestimation of $α$. The pulsars in our sample have large dispersion measures and are therefore likely to be distant. We find that a model using an isotropic scatter broadening function is consistent with the data, likely due to the averaging effect of multiple scattering screens along the line of sight. Our sample of scattering parameters provides a strong data set upon which we can build to test more complex and time-dependent scattering phenomena, such as extreme scattering events.

astro-ph.HE↗

arXiv2021

Eight new millisecond pulsars from the first MeerKAT globular cluster census

We have used the central 44 antennas of the new 64-dish MeerKAT radio telescope array to conduct a deep search for new pulsars in the core of nine globular clusters. This has led to the discovery of eight new millisecond pulsars in six different clusters. Two new binaries, 47 Tuc ac and 47 Tuc ad, are eclipsing "spiders", featuring compact orbits ($\lesssim 0.32$ days), very low-mass companions and regular occultations of their pulsed emission. The other three new binary pulsars (NGC 6624G, M62G, and Ter 5 an) are in wider ($> 0.7$ days) orbits, with companions that are likely to be white dwarfs or neutron stars. NGC 6624G has a large eccentricity of $e\simeq 0.38$, which enabled us to detect the rate of advance of periastron. This suggests that the system is massive, with a total mass of $M{\rm tot} = 2.65 \pm 0.07$ M$_{\odot}$. Likewise, for Ter 5 an, with $e \simeq 0.0066$, we obtain $M{\rm tot}= 2.97 \pm 0.52$ M$_{\odot}$. The other three new discoveries (NGC 6522D, NGC 6624H and NGC 6752F) are faint isolated pulsars. Finally, we have used the whole MeerKAT array and synthesized 288 beams, covering an area of $\sim2$ arcmin in radius around the center of NGC 6624. This has allowed us to localize many of the pulsars in the cluster, demonstrating the beamforming capabilities of the TRAPUM software backend and paving the way for the upcoming MeerKAT globular cluster pulsar survey.

astro-ph.HE↗

arXiv2021

Measurements of pulse jitter and single-pulse variability in millisecond pulsars using MeerKAT

Using the state-of-the-art SKA precursor, the MeerKAT radio telescope, we explore the limits to precision pulsar timing of millisecond pulsars achievable due to pulse stochasticity (jitter). We report new jitter measurements in 15 of the 29 pulsars in our sample and find that the levels of jitter can vary dramatically between them. For some, like the 2.2~ms pulsar PSR J2241--5236, we measure an implied jitter of just $\sim$ 4~ns/hr, while others like the 3.9~ms PSR J0636--3044 are limited to $\sim$ 100 ns/hr. While it is well known that jitter plays a central role to limiting the precision measurements of arrival times for high signal-to-noise ratio observations, its role in the measurement of dispersion measure (DM) has not been reported, particularly in broad-band observations. Using the exceptional sensitivity of MeerKAT, we explored this on the bright millisecond pulsar PSR J0437--4715 by exploring the DM of literally every pulse. We found that the derived single pulse DMs vary by typically 0.0085 cm$^{-3}$ pc from the mean, and that the best DM estimate is limited by the differential pulse jitter across the band. We postulate that all millisecond pulsars will have their own limit on DM precision which can only be overcome with longer integrations. Using high-time resolution filterbank data of 9 $μ$s, we also present a statistical analysis of single pulse phenomenology. Finally, we discuss optimization strategies for the MeerKAT pulsar timing program and its role in the context of the International Pulsar Timing Array (IPTA).

astro-ph.HE↗

arXiv2020

The Thousand-Pulsar-Array programme on MeerKAT II: observing strategy for pulsar monitoring with subarrays

The Thousand Pulsar Array (TPA) project currently monitors about 500 pulsars with the sensitive MeerKAT radio telescope by using subarrays to observe multiple sources simultaneously. Here we define the adopted observing strategy, which guarantees that each target is observed long enough to obtain a high fidelity pulse profile, thereby reaching a sufficient precision of a simple pulse shape parameter. This precision is estimated from the contribution of the system noise of the telescope, and the pulse-to-pulse variability of each pulsar, which we quantify under some simplifying assumptions. We test the assumptions and choice of model parameters using data from the MeerKAT 64-dish array, Lovell and Parkes telescopes. We demonstrate that the observing times derived from our method produce high fidelity pulse profiles that meet the needs of the TPA in studying pulse shape variability and pulsar timing. Our method can also be used to compare strategies for observing large numbers of pulsars with telescopes capable of forming multiple subarray configurations. We find that using two 32-dish MeerKAT subarrays is the most efficient strategy for the TPA project. We also find that the ability to observe in different array configurations will become increasingly important for large observing programmes using the Square Kilometre Array telescope.

astro-ph.HE↗

arXiv2020

Identifying and mitigating noise sources in precision pulsar timing data sets

Pulsar timing array projects measure the pulse arrival times of millisecond pulsars for the primary purpose of detecting nanohertz-frequency gravitational waves. The measurements include contributions from a number of astrophysical and instrumental processes, which can either be deterministic or stochastic. It is necessary to develop robust statistical and physical models for these noise processes because incorrect models diminish sensitivity and may cause a spurious gravitational wave detection. Here we characterise noise processes for the 26 pulsars in the second data release of the Parkes Pulsar Timing Array using Bayesian inference. In addition to well-studied noise sources found previously in pulsar timing array data sets such as achromatic timing noise and dispersion measure variations, we identify new noise sources including time-correlated chromatic noise that we attribute to variations in pulse scattering. We also identify "exponential dip" events in four pulsars, which we attribute to magnetospheric effects as evidenced by pulse profile shape changes observed for three of the pulsars. This includes an event in PSR J1713$+$0747, which had previously been attributed to interstellar propagation. We present noise models to be used in searches for gravitational waves. We outline a robust methodology to evaluate the performance of noise models and identify unknown signals in the data. The detection of variations in pulse profiles highlights the need to develop efficient profile domain timing methods.

astro-ph.HE↗

arXiv2020

The Thousand-Pulsar-Array programme on MeerKAT IV: Polarisation properties of young, energetic pulsars

We present observations of 35 high spin-down energy radio pulsars using the MeerKAT telescope. Polarisation profiles and associated parameters are also presented. We derive the geometry for a selection of pulsars which show interpulse emission. We point out that, in several cases, these radio pulsars should also be seen in $γ$-rays but that improved radio timing is required to aid the high-energy detection. We discuss the relationship between the width of the radio profile and its high-energy detectability. Finally, we reflect on the correlation between the spin-down energy and the radio polarisation fraction and the implications this may have for $γ$-ray emission.

astro-ph.HE↗

arXiv2020

The MeerKAT Telescope as a Pulsar Facility: System verification and early science results from MeerTime

We describe system verification tests and early science results from the pulsar processor (PTUSE) developed for the newly-commissioned 64-dish SARAO MeerKAT radio telescope in South Africa. MeerKAT is a high-gain (~2.8 K/Jy) low-system temperature (~18 K at 20cm) radio array that currently operates from 580-1670 MHz and can produce tied-array beams suitable for pulsar observations. This paper presents results from the MeerTime Large Survey Project and commissioning tests with PTUSE. Highlights include observations of the double pulsar J0737-3039A, pulse profiles from 34 millisecond pulsars from a single 2.5h observation of the Globular cluster Terzan 5, the rotation measure of Ter5O, a 420-sigma giant pulse from the Large Magellanic Cloud pulsar PSR J0540-6919, and nulling identified in the slow pulsar PSR J0633-2015. One of the key design specifications for MeerKAT was absolute timing errors of less than 5 ns using their novel precise time system. Our timing of two bright millisecond pulsars confirm that MeerKAT delivers exceptional timing. PSR J2241-5236 exhibits a jitter limit of <4 ns per hour whilst timing of PSR J1909-3744 over almost 11 months yields an rms residual of 66 ns with only 4 min integrations. Our results confirm that the MeerKAT is an exceptional pulsar telescope. The array can be split into four separate sub-arrays to time over 1000 pulsars per day and the future deployment of S-band (1750-3500 MHz) receivers will further enhance its capabilities.

astro-ph.IM↗

arXiv2020

The Parkes Pulsar Timing Array Project: Second data release

We describe 14 years of public data from the Parkes Pulsar Timing Array (PPTA), an ongoing project that is producing precise measurements of pulse times of arrival from 26 millisecond pulsars using the 64-m Parkes radio telescope with a cadence of approximately three weeks in three observing bands. A comprehensive description of the pulsar observing systems employed at the telescope since 2004 is provided, including the calibration methodology and an analysis of the stability of system components. We attempt to provide full accounting of the reduction from the raw measured Stokes parameters to pulse times of arrival to aid third parties in reproducing our results. This conversion is encapsulated in a processing pipeline designed to track provenance. Our data products include pulse times of arrival for each of the pulsars along with an initial set of pulsar parameters and noise models. The calibrated pulse profiles and timing template profiles are also available. These data represent almost 21,000 hrs of recorded data spanning over 14 years. After accounting for processes that induce time-correlated noise, 22 of the pulsars have weighted root-mean-square timing residuals of < 1 $μ$s in at least one radio band. The data should allow end users to quickly undertake their own gravitational-wave analyses (for example) without having to understand the intricacies of pulsar polarisation calibration or attain a mastery of radio-frequency interference mitigation as is required when analysing raw data files.

astro-ph.IM↗

arXiv2020

The Thousand-Pulsar-Array programme on MeerKAT I: Science objectives and first results

We report here on initial results from the Thousand Pulsar Array (TPA) programme, part of the Large Survey Project "MeerTime" on the MeerKAT telescope. The interferometer is used in tied-array mode in the band from 856 to 1712~MHz, and the wide band coupled with the large collecting area and low receiver temperature make it an excellent telescope for the study of radio pulsars. The TPA is a 5 year project which aims to observe (a) more than 1000 pulsars to obtain high-fidelity pulse profiles, (b) some 500 of these pulsars over multiple epochs, (c) long sequences of single-pulse trains from several hundred pulsars. The scientific outcomes from the programme will include determination of pulsar geometries, the location of the radio emission within the pulsar magnetosphere, the connection between the magnetosphere and the crust and core of the star, tighter constraints on the nature of the radio emission itself as well as interstellar medium studies. First results presented here include updated dispersion measures, 26 pulsars with Faraday rotation measures derived for the first time and a description of interesting emission phenomena observed thus far.

astro-ph.HE↗

arXiv2019

A pulsar-based timescale from the International Pulsar Timing Array

We have constructed a new timescale, TT(IPTA16), based on observations of radio pulsars presented in the first data release from the International Pulsar Timing Array (IPTA). We used two analysis techniques with independent estimates of the noise models for the pulsar observations and different algorithms for obtaining the pulsar timescale. The two analyses agree within the estimated uncertainties and both agree with TT(BIPM17), a post-corrected timescale produced by the Bureau International des Poids et Mesures (BIPM). We show that both methods could detect significant errors in TT(BIPM17) if they were present. We estimate the stability of the atomic clocks from which TT(BIPM17) is derived using observations of four rubidium fountain clocks at the US Naval Observatory. Comparing the power spectrum of TT(IPTA16) with that of these fountain clocks suggests that pulsar-based timescales are unlikely to contribute to the stability of the best timescales over the next decade, but they will remain a valuable independent check on atomic timescales. We also find that the stability of the pulsar-based timescale is likely to be limited by our knowledge of solar-system dynamics, and that errors in TT(BIPM17) will not be a limiting factor for the primary goal of the IPTA, which is to search for the signatures of nano-Hertz gravitational waves.

astro-ph.IM↗

arXiv2019

The International Pulsar Timing Array: Second data release

In this paper, we describe the International Pulsar Timing Array second data release, which includes recent pulsar timing data obtained by three regional consortia: the European Pulsar Timing Array, the North American Nanohertz Observatory for Gravitational Waves, and the Parkes Pulsar Timing Array. We analyse and where possible combine high-precision timing data for 65 millisecond pulsars which are regularly observed by these groups. A basic noise analysis, including the processes which are both correlated and uncorrelated in time, provides noise models and timing ephemerides for the pulsars. We find that the timing precisions of pulsars are generally improved compared to the previous data release, mainly due to the addition of new data in the combination. The main purpose of this work is to create the most up-to-date IPTA data release. These data are publicly available for searches for low-frequency gravitational waves and other pulsar science.

astro-ph.HE↗

arXiv2019

Modelling annual and orbital variations in the scintillation of the relativistic binary PSR J1141$-$6545

We have observed the relativistic binary pulsar PSR J1141$-$6545 over a period of $\sim$6 years using the Parkes 64 m radio telescope, with a focus on modelling the diffractive intensity scintillations to improve the accuracy of the astrometric timing model. The long-term scintillation, which shows orbital and annual variations, allows us to measure parameters that are difficult to measure with pulsar timing alone. These include: the orbital inclination $i$; the longitude of the ascending node $Ω$; and the pulsar system transverse velocity. We use the annual variations to resolve the previous ambiguity in the sense of the inclination angle. Using the correct sense, and a prior probability distribution given by a constraint from pulsar timing ($i=73\pm3^\circ$), we find $Ω=24.8\pm1.8^\circ$ and we estimate the pulsar distance to be $D=10^{+4}_{-3}$ kpc. This then gives us an estimate of this pulsar's proper motion of $μ_α\cosδ=2.9\pm1.0$ mas yr$^{-1}$ in right ascension and $μ_δ=1.8\pm0.6$ mas yr$^{-1}$ in declination. Finally, we obtain measurements of the spatial structure of the interstellar electron density fluctuations, including: the spatial scale and anisotropy of the diffraction pattern; the distribution of scattering material along the line of sight; and spatial variation in the strength of turbulence from epoch to epoch. We find that the scattering is dominated by a thin screen at a distance of $(0.724\pm0.008)D$, with an anisotropy axial ratio $A_{\rm r} = 2.14\pm0.11$.

astro-ph.HE↗

arXiv2018

Studying the solar system with the International Pulsar Timing Array

Pulsar-timing analyses are sensitive to errors in the solar-system ephemerides (SSEs) that timing models utilise to estimate the location of the solar-system barycentre, the quasi-inertial reference frame to which all recorded pulse times-of-arrival are referred. Any error in the SSE will affect all pulsars, therefore pulsar timing arrays (PTAs) are a suitable tool to search for such errors and impose independent constraints on relevant physical parameters. We employ the first data release of the International Pulsar Timing Array to constrain the masses of the planet-moons systems and to search for possible unmodelled objects (UMOs) in the solar system. We employ ten SSEs from two independent research groups, derive and compare mass constraints of planetary systems, and derive the first PTA mass constraints on asteroid-belt objects. Constraints on planetary-system masses have been improved by factors of up to 20 from the previous relevant study using the same assumptions, with the mass of the Jovian system measured at 9.5479189(3)$\times10^{-4}$ $M_{\odot}$. The mass of the dwarf planet Ceres is measured at 4.7(4)$\times10^{-10}$ $M_{\odot}$. We also present the first sensitivity curves using real data that place generic limits on the masses of UMOs, which can also be used as upper limits on the mass of putative exotic objects. For example, upper limits on dark-matter clumps are comparable to published limits using independent methods. While the constraints on planetary masses derived with all employed SSEs are consistent, we note and discuss differences in the associated timing residuals and UMO sensitivity curves.

astro-ph.EP↗