arXiv subjects

D. J. Summers

Publications and source records attributed to D. J. Summers.

At least 19 recordsLinked to original sources

arXiv2020

Unconventional Ideas for Ionization Cooling of Muons

Small muon beams increase the luminosity of a muon collider. Reducing the momentum and position spreads of muons reduces emittance and leads to small, cool beams. Ionization cooling has been observed at the Muon Ionization Cooling Experiment. 6D emittance reduction by a factor of 100, 000 has been achieved in simulation. Another factor of 5 in cooling would meet the basic requirements of a high luminosity muon collider. In this paper we compare, for the first time, the amount of RF needed in a cooling channel to previous linacs. We also outline three methods aimed to help achieve a final factor of 5 in 6D cooling.

physics.acc-ph↗

arXiv2015

Muon Emittance Exchange with a Potato Slicer

We propose a novel scheme for final muon ionization cooling with quadrupole doublets followed by emittance exchange in vacuum to achieve the small beam sizes needed by a muon collider. A flat muon beam with a series of quadrupole doublet half cells appears to provide the strong focusing required for final cooling. Each quadrupole doublet has a low beta region occupied by a dense, low Z absorber. After final cooling, normalized transverse, longitudinal, and angular momentum emittances of 0.100, 2.5, and 0.200 mm-rad are exchanged into 0.025, 70, and 0.0 mm-rad. A skew quadrupole triplet transforms a round muon bunch with modest angular momentum into a flat bunch with no angular momentum. Thin electrostatic septa efficiently slice the flat bunch into 17 parts. The 17 bunches are interleaved into a 3.7 meter long train with RF deflector cavities. Snap bunch coalescence combines the muon bunch train longitudinally in a 21 GeV ring in 55 microseconds, one quarter of a synchrotron oscillation period. A linear long wavelength RF bucket gives each bunch a different energy causing the bunches to drift in the ring until they merge into one bunch and can be captured in a short wavelength RF bucket with a 13% muon decay loss and a packing fraction as high as 87%.

physics.acc-ph↗

arXiv2012

A 233 km Tunnel for Lepton and Hadron Colliders

A decade ago, a cost analysis was conducted to bore a 233 km circumference Very Large Hadron Collider (VLHC) tunnel passing through Fermilab. Here we outline implementations of $e^+e^-$, $p \bar{p}$, and $μ^+ μ^-$ collider rings in this tunnel using recent technological innovations. The 240 and 500 GeV $e^+e^-$ colliders employ Crab Waist Crossings, ultra low emittance damped bunches, short vertical IP focal lengths, superconducting RF, and low coercivity, grain oriented silicon steel/concrete dipoles. Some details are also provided for a high luminosity 240 GeV $e^+ e^-$ collider and 1.75 TeV muon accelerator in a Fermilab site filler tunnel. The 40 TeV $p \bar{p}$ collider uses the high intensity Fermilab $\bar{p}$ source, exploits high cross sections for $p \bar{p}$ production of high mass states, and uses 2 Tesla ultra low carbon steel/YBCO superconducting magnets run with liquid neon. The 35 TeV muon ring ramps the 2 Tesla superconducting magnets at 9 Hz every 0.4 seconds, uses 250 GV of superconducting RF to accelerate muons from 1.75 to 17.5 TeV in 63 orbits with 71% survival, and mitigates neutrino radiation with phase shifting, roller coaster motion in a FODO lattice.

physics.acc-ph↗

arXiv2012

Test of a 1.8 Tesla, 400 Hz Dipole for a Muon Synchrotron

A 1.8 T dipole magnet using thin grain oriented silicon steel laminations has been constructed as a prototype for a muon synchrotron ramping at 400 Hz. Following the practice in large 3 phase transformers and our own Opera-2d simulations, joints are mitred to take advantage of the magnetic properties of the steel which are much better in the direction in which the steel was rolled. Measurements with a Hysteresigraph 5500 and Epstein frame show a high magnetic permeability which minimizes stored energy in the yoke allowing the magnet to ramp quickly with modest voltage. Coercivity is low which minimizes hysteresis losses. A power supply with a fast Insulated Gate Bipolar Transistor (IGBT) switch and a capacitor was constructed. Coils are wound with 12 gauge copper wire. Thin wire and laminations minimize eddy current losses. The magnetic field was measured with a peak sensing Hall probe.

physics.acc-ph↗

arXiv2012

Rapid-cycling synchrotron with variable momentum compaction

There are conflicting requirements on the value of the momentum compaction factor during energy ramping in a synchrotron: at low energies it should be positive and sufficiently large to make the slippage factor small so that it is possible to work closer to the RF voltage crest and ensure sufficient RF bucket area, whereas at higher energies it should be small or negative to avoid transition crossing. In the present report we propose a lattice with a variable momentum compaction factor and consider the possibility of using it in a high repetition rate proton driver for a muon collider and neutrino factory.

physics.acc-ph↗

arXiv2011

Magnetic Field Expansion Out of a Plane: Application to Inverse Cyclotron Muon Cooling

In studies of the dynamics of charged particles in a cyclotron magnetic field, the specified field is generally B_z in the z = 0 midplane where B_r and B_theta are zero. B_r(r, theta, z) and B_theta(r, theta, z) are simple to determine through a linear expansion which assumes that B_z is independent of z. But, an expansion to only first order may not be sufficient for orbit simulations at large z. This paper reviews the expansion of a specified B_z(r, theta, z = 0) out of the z = 0 midplane to arbitrary order, and shows simple examples worked out to 4th order.

physics.acc-ph↗

arXiv2007

Muon Acceleration to 750 GeV in the Tevatron Tunnel for a 1.5 TeV mu+ mu- Collider

Muon acceleration from 30 to 750 GeV in 72 orbits using two rings in the 1000m radius Tevatron tunnel is explored. The first ring ramps at 400 Hz and accelerates muons from 30 to 400 GeV in 28 orbits using 14 GV of 1.3 GHz superconducting RF. The ring duplicates the Fermilab 400 GeV main ring FODO lattice, which had a 61m cell length. Muon survival is 80%. The second ring accelerates muons from 400 to 750 GeV in 44 orbits using 8 GV of 1.3 GHz superconducting RF. The 30 T/m main ring quadrupoles are lengthened 87% to 3.3m. The four main ring dipoles in each half cell are replaced by three dipoles which ramp at 550 Hz from -1.8T to +1.8T interleaved with two 8T fixed superconducting dipoles. The ramping and superconducting dipoles oppose each other at 400 GeV and act in unison at 750 GeV. Muon survival is 92%. Two mm copper wire, 0.28mm grain oriented silicon steel laminations, and a low duty cycle mitigate eddy current losses. Low emittance muon bunches allow small aperatures and permit magnets to ramp with a few thousand volts. Little civil construction is required. The tunnel exists.

physics.acc-ph↗

arXiv2005

6D Muon Ionization Cooling with an Inverse Cyclotron

A large admittance sector cyclotron filled with LiH wedges surrounded by helium or hydrogen gas is explored. Muons are cooled as they spiral adiabatically into a central swarm. As momentum approaches zero, the momentum spread also approaches zero. Long bunch trains coalesce. Energy loss is used to inject the muons into the outer rim of the cyclotron. The density of material in the cyclotron decreases adiabatically with radius. The sector cyclotron magnetic fields are transformed into an azimuthally symmetric magnetic bottle in the center. Helium gas is used to inhibit muonium formation by positive muons. Deuterium gas is used to allow captured negative muons to escape via the muon catalyzed fusion process. The presence of ionized gas in the center may automatically neutralize space charge. When a bunch train has coalesced into a central swarm, it is ejected axially with an electric kicker pulse.

physics.acc-ph↗

arXiv2005

6D Ionization Muon Cooling with Tabletop Rings

Progress on six dimensional ionization muon cooling with relatively small rings of magnets is described. Lattices being explored include scaling sector cyclotrons with edge focusing and strong focusing, fixed field alternating gradient (FFAG) rings. Ionization cooling is provided by high pressure hydrogen gas which removes both transverse and longitudinal momentum. Lost longitudinal momentum is replaced using radio frequency (RF) cavities, giving a net transverse emittance reduction. The longer path length in the hydrogen of higher momentum muons decreases longitudinal emittance at the expense of transverse emittance. Thus emittance exchange allows these rings to cool in all six dimensions and not just transversely. Alternatively, if the RF is located after the ring, it may be possible to cool the muons by stopping them as they spiral adiabatically into a central swarm. As momentum goes to zero, the momentum spread goes to zero. The resulting cooled muons can lead to an intense muon beam which could be a source for neutrino factories or muon colliders.

physics.acc-ph↗

arXiv2004

Muon Acceleration using Fixed Field, Alternating Gradient (FFAG) Rings

Given their 2.2 microsecond lifetime, muons must be accelerated fairly rapidly for a neutrino factory or muon collider. Muon bunches tend to be large. Progress in fixed field, alternating gradient (FFAG) lattices to meet this challenge is reviewed. FFAG magnets are naturally wide; low momentum muons move from the low field side of a gradient magnet to the high field side as they gain energy. This can be exploited to do double duty and allow a large beam admittance without unduly increasing the magnetic field volume. If the amount of RF must be reduced to optimize cost, an FFAG ring can accommodate extra orbits. I describe both scaling FFAGs in which the bends in each magnet are energy independent and non-scaling FFAGs in which the bends in each magnet do vary with muon energy. In all FFAG designs the sum of the bends in groups of magnets are constant; otherwise orbits would not close. Ways of keeping the accelerating beam in phase with the RF are described. Finally, a 1 MeV proof of principle scaling FFAG has been built at KEK and began accelerating protons in June 2000 with a 1 kHz repetition rate.

physics.acc-ph↗

arXiv2004

Multi-Terabyte EIDE Disk Arrays running Linux RAID5

High-energy physics experiments are currently recording large amounts of data and in a few years will be recording prodigious quantities of data. New methods must be developed to handle this data and make analysis at universities possible. Grid Computing is one method; however, the data must be cached at the various Grid nodes. We examine some storage techniques that exploit recent developments in commodity hardware. Disk arrays using RAID level 5 (RAID-5) include both parity and striping. The striping improves access speed. The parity protects data in the event of a single disk failure, but not in the case of multiple disk failures. We report on tests of dual-processor Linux Software RAID-5 arrays and Hardware RAID-5 arrays using a 12-disk 3ware controller, in conjunction with 250 and 300 GB disks, for use in offline high-energy physics data analysis. The price of IDE disks is now less than $1/GB. These RAID-5 disk arrays can be scaled to sizes affordable to small institutions and used when fast random access at low cost is important.

physics.data-an↗

arXiv2003

A Pulsed Synchrotron for Muon Acceleration at a Neutrino Factory

A 4600 Hz pulsed synchrotron is considered as a means of accelerating cool muons with superconducting RF cavities from 4 to 20 GeV/c for a neutrino factory. Eddy current losses are held to less than a megawatt by the low machine duty cycle plus 100 micron thick grain oriented silicon steel laminations and 250 micron diameter copper wires. Combined function magnets with 20 T/m gradients alternating within single magnets form the lattice. Muon survival is 83%.

physics.acc-ph↗

arXiv2003

Search for Rare Charm Meson Decays at FNAL E791

We report the results of a blind search for flavor-changing neutral current (FCNC), lepton-flavor violating, and lepton-number violating decays of D+, Ds+, and D0 mesons (and their antiparticles) into 2-, 3-, and 4-body states including a lepton pair. Such decays may involve Flavor-Changing Neutral Currents, Leptoquarks, Horizontal Gauge Bosons, or Majorana Neutrinos. No evidence for any of these decays is found. Therefore, we present 90% confidence level branching fraction upper limits, typically at the 0.0001 level. A total of 51 decay channels have been examined; 26 have not been previously reported and 18 are significant improvements over previous results.

hep-ex↗

arXiv2003

Terabyte IDE RAID-5 Disk Arrays

High energy physics experiments are currently recording large amounts of data and in a few years will be recording prodigious quantities of data. New methods must be developed to handle this data and make analysis at universities possible. We examine some techniques that exploit recent developments in commodity hardware. We report on tests of redundant arrays of integrated drive electronics (IDE) disk drives for use in offline high energy physics data analysis. IDE redundant array of inexpensive disks (RAID) prices now are less than the cost per terabyte of million-dollar tape robots! The arrays can be scaled to sizes affordable to institutions without robots and used when fast random access at low cost is important.

physics.data-an↗

arXiv2003

A Very Fast Ramping Muon Synchrotron for a Neutrino Factory

A 4600 Hz fast ramping synchrotron is studied as an economical way of accelerating muons from 4 to 20 GeV/c for a neutrino factory. Eddy current losses are minimized by the low machine duty cycle plus thin grain oriented silicon steel laminations and thin copper wires. Combined function magnets with high gradients alternating within single magnets form the lattice. Muon survival is 83%.

hep-ex↗

arXiv2003

Asymmetries in the Production of Lambda0 in 250 GeV/c pi+-, K+- and p -- Nucleon Interactions

Using data from Fermilab fixed-target experiment E769, we have measured particle-antiparticle production asymmetries for Lambda0 hyperons in 250 GeV/c pi+-, K+- and p -- nucleon interactions. The asymmetries are measured as functions of Feynman-x (x_F) and p_t^2 over the ranges -0.12<=x_F<=0.12 and 0<=p_t^2<=3 (GeV/c)^2 (for positive beam) and -0.12<=x_F<=0.4 and 0<=p_t^2<=10 (GeV/c)^2 (for negative beam). We find substantial asymmetries, even at x_F around zero. We also observe leading-particle-type asymmetries. These latter effects are qualitatively as expected from valence-quark content of the target and variety of projectiles studied.

hep-ex↗

arXiv2002

Muon Acceleration with a Very Fast Ramping Synchrotron for a Neutrino Factory

A 4600 Hz fast ramping synchrotron is explored as an economical way of accelerating muons from 4 to 20 GeV/c for a neutrino factory. Eddy current losses are minimized by the low machine duty cycle plus thin grain oriented silicon steel laminations and thin copper wires. Combined function magnets with high gradients alternating within single magnets form the lattice we describe. Muon survival is 83%.

hep-ex↗

arXiv2002

Redundant Arrays of IDE Drives

The next generation of high-energy physics experiments is expected to gather prodigious amounts of data. New methods must be developed to handle this data and make analysis at universities possible. We examine some techniques that use recent developments in commodity hardware. We test redundant arrays of integrated drive electronics (IDE) disk drives for use in offline high-energy physics data analysis. IDE redundant array of inexpensive disks (RAID) prices now equal the cost per terabyte of million-dollar tape robots! The arrays can be scaled to sizes affordable to institutions without robots and used when fast random access at low cost is important. We also explore three methods of moving data between sites; internet transfers, hot pluggable IDE disks in FireWire cases, and writable digital video disks (DVD-R).

hep-ex↗