Searcharxiv⌕ Search

arXiv subjects

D. Kurt Gaskill

Publications and source records attributed to D. Kurt Gaskill.

At least 19 recordsLinked to original sources
arXiv2026

Electrical Detection of Magnetization Switching in Single-Molecule Magnets

Single-molecule magnets (SMMs) with chemically tailorable properties are potential building blocks for quantum computing, high-density magnetic memory, and spintronics.1 2 3,4 These applications require isolated or few molecules on substrates, but studies of SMMs have mainly focused on bulk crystals. Moreover, fabrication of SMM-based devices and electrical detection of the SMM magnetic state are still coveted milestones that have so far been achieved mainly for double-decker rare-earth phthalocyanines at temperatures below 1 K.5-8 Here we demonstrate electrical detection of magnetization switching for a modification of the archetypal SMM Mn12, up to 70 K, based on the supramolecular spin valve effect5 with graphene quantum dots9. Notably, the exchange interaction between the molecules and the graphene, as well as the dot-mediated intermolecular interaction, can be directly extracted from the electrical response, opening the way to an effective characterization of the quantum properties of different types of SMMs in a wide temperature range.

cond-mat.mes-hall↗
arXiv2023

Quasi-free-standing AA-stacked bilayer graphene induced by calcium intercalation of the graphene-silicon carbide interface

We study quasi-freestanding bilayer graphene on silicon carbide intercalated by calcium. The intercalation, and subsequent changes to the system, were investigated by low-energy electron diffraction, angle-resolved photoemission spectroscopy (ARPES) and density-functional theory (DFT). Calcium is found to intercalate only at the graphene-SiC interface, completely displacing the hydrogen terminating SiC. As a consequence, the system becomes highly n-doped. Comparison to DFT calculations shows that the band dispersion, as determined by ARPES, deviates from the band structure expected for Bernal-stacked bilayer graphene. Instead, the electronic structure closely matches AA-stacked bilayer graphene on Ca-terminated SiC, indicating a spontaneous transition from AB- to AA-stacked bilayer graphene following calcium intercalation of the underlying graphene-SiC interface.

cond-mat.mtrl-sci↗
arXiv2023

Increasing the Rate of Magnesium Intercalation Underneath Epitaxial Graphene on 6H-SiC(0001)

Magnesium intercalated 'quasi-freestanding' bilayer graphene on 6H-SiC(0001) (Mg-QFSBLG) has many favorable properties (e.g., highly n-type doped, relatively stable in ambient conditions). However, intercalation of Mg underneath monolayer graphene is challenging, requiring multiple intercalation steps. Here, we overcome these challenges and subsequently increase the rate of Mg intercalation by laser patterning (ablating) the graphene to form micron-sized discontinuities. We then use low energy electron diffraction to verify Mg-intercalation and conversion to Mg-QFSBLG, and X-ray photoelectron spectroscopy to determine the Mg intercalation rate for patterned and non-patterned samples. By modeling Mg intercalation with the Verhulst equation, we find that the intercalation rate increase for the patterned sample is 4.5$\pm$1.7. Since the edge length of the patterned sample is $\approx$5.2 times that of the non-patterned sample, the model implies that the increased intercalation rate is proportional to the increase in edge length. Moreover, Mg intercalation likely begins at graphene discontinuities in pristine samples (not step edges or flat terraces), where the 2D-like crystal growth of Mg-silicide proceeds. Our laser patterning technique may enable the rapid intercalation of other atomic or molecular species, thereby expanding upon the library of intercalants used to modify the characteristics of graphene, or other 2D materials and heterostructures.

cond-mat.mtrl-sci↗
arXiv2020

Magnesium-intercalated graphene on SiC: highly n-doped air-stable bilayer graphene at extreme displacement fields

We use angle-resolved photoemission spectroscopy to investigate the electronic structure of bilayer graphene at high n-doping and extreme displacement fields, created by intercalating epitaxial monolayer graphene on silicon carbide with magnesium to form quasi-freestanding bilayer graphene on magnesium-terminated silicon carbide. Angle-resolved photoemission spectroscopy reveals that upon magnesium intercalation, the single massless Dirac band of epitaxial monolayer graphene is transformed into the characteristic massive double-band Dirac spectrum of quasi-freestanding bilayer graphene. Analysis of the spectrum using a simple tight binding model indicates that magnesium intercalation results in an n-type doping of 2.1 $\times$ 10$^{14}$ cm$^{-2}$, creates an extremely high displacement field of 2.6 V/nm, opening a considerable gap of 0.36 eV at the Dirac point. This is further confirmed by density-functional theory calculations for quasi-freestanding bilayer graphene on magnesium-terminated silicon carbide, which show a similar doping level, displacement field and bandgap. Finally, magnesium-intercalated samples are surprisingly robust to ambient conditions; no significant changes in the electronic structure are observed after 30 minutes exposure in air.

cond-mat.mes-hall↗
arXiv2020

Freestanding n-Doped Graphene via Intercalation of Calcium and Magnesium into the Buffer Layer - SiC(0001) Interface

The intercalation of epitaxial graphene on SiC(0001) with Ca has been studied extensively, yet precisely where the Ca resides remains elusive. Furthermore, the intercalation of Mg underneath epitaxial graphene on SiC(0001) has not been reported. Here, we use low energy electron diffraction, x-ray photoelectron spectroscopy, secondary electron cut-off photoemission and scanning tunneling microscopy to elucidate the physical and electronic structure of both Ca- and Mg-intercalated epitaxial graphene on 6H-SiC(0001). We find that Ca intercalates underneath the buffer layer and bonds to the Si-terminated SiC surface, breaking the C-Si bonds of the buffer layer i.e. 'freestanding' the buffer layer to form Ca-intercalated quasi-freestanding bilayer graphene (Ca-QFSBLG). The situation is similar for the Mg-intercalation of epitaxial graphene on SiC(0001), where an ordered Mg-terminated reconstruction at the SiC surface and Mg bonds to the Si-terminated SiC surface are formed, resulting in Mg-intercalated quasi-freestanding bilayer graphene (Mg-QFSBLG). Ca-intercalation underneath the buffer layer has not been considered in previous studies of Ca-intercalated epitaxial graphene. Furthermore, we find no evidence that either Ca or Mg intercalates between graphene layers. However, we do find that both Ca-QFSBLG and Mg-QFSBLG exhibit very low workfunctions of 3.68 and 3.78 eV, respectively, indicating high n-type doping. Upon exposure to ambient conditions, we find Ca-QFSBLG degrades rapidly, whereas Mg-QFSBLG remains remarkably stable.

cond-mat.mtrl-sci↗
arXiv2019

Oxidation of Monolayer WS$_{2}$ in Ambient is a Photoinduced Process

We have studied the ambient air oxidation of chemical vapor deposition (CVD) grown monolayers of the semiconducting transition metal dichalcogenide (S-TMD) WS$_{2}$ using optical microscopy, laser scanning confocal microscopy (LSCM), photoluminescence (PL) spectroscopy, and atomic force microscopy (AFM). Monolayer WS$_{2}$ exposed to ambient conditions in the presence of light (typical laboratory ambient light for weeks, or typical PL spectroscopy map), exhibits damage due to oxidation which can be detected with the LSCM and AFM; though may not be evident in conventional optical microscopy due to poorer contrast and resolution. Additionally, this oxidation was not random, and correlated with 'high-symmetry' and red-shifted areas in the PL spectroscopy map - areas thought to contain a higher concentration of sulfur vacancies. In contrast, samples kept in ambient and darkness showed no signs of oxidation for up to 10 months. Low-irradiance/fluence experiments showed that samples subjected to excitation energies at or above the trion excitation energy (532 nm/2.33 eV and 660 nm/1.88 eV) oxidized in as little as 7 days, even for irradiances and fluences eight and four orders of magnitude lower (respectively) than previously reported. No significant oxidation was observed for 760 nm/1.63 eV light exposure, which lies below the trion excitation energy in WS$_{2}$. The strong wavelength dependence and apparent lack of irradiance dependence suggests that ambient oxidation of WS$_{2}$ is initiated by photon-mediated electronic band transitions, that is, photo-oxidation. These findings have important implications for prior, present and future studies concerning S-TMDs measured, stored or manipulated in ambient conditions.

physics.app-ph↗
arXiv2019

Effect of defect-induced cooling on graphene hot-electron bolometers

At high phonon temperature, defect-mediated electron-phonon collisions (supercollisions) in graphene allow for larger energy transfer and faster cooling of hot electrons than the normal, momentum-conserving electron-phonon collisions. Disorder also affects the heat flow between electrons and phonons at very low phonon temperature, where the phonon wavelength exceeds the mean free path. In both cases, the cooling rate is predicted to exhibit a characteristic cubic power law dependence on the electron temperature, markedly different from the T^4 dependence predicted for pristine graphene. The impact of defect-induced cooling on the performance of optoelectronic devices is still largely unexplored. Here we study the cooling mechanism of hot-electron bolometers based on epitaxial graphene quantum dots where the defect density can be controlled with the fabrication process. The devices with high defect density exhibit the cubic power law. Defect-induced cooling yields a slower increase of the thermal conductance with increasing temperature, thereby greatly enhancing the device responsivity compared to devices with lower defect density and operating with normal-collision cooling.

cond-mat.mes-hall↗
arXiv2019

Nanoscale patterning of quasiparticle band alignment

Control of atomic-scale interfaces between materials with distinct electronic structures is crucial for the design and fabrication of most electronic devices. In the case of two-dimensional (2D) materials, disparate electronic structures can be realized even within a single uniform sheet, merely by locally applying different vertical bias voltages. Indeed, it has been suggested that nanoscale electronic patterning in a single sheet can be achieved by placing the 2D material on a suitably pre-patterned substrate, exploiting the sensitivity of 2D materials to their environment via band alignment, screening or hybridization. Here, we utilize the inherently nano-structured single layer (SL) and bilayer (BL) graphene on silicon carbide to laterally tune the electrostatic gating of adjacent SL tungsten disulphide (WS$_2$) in a van der Waals heterostructure. The electronic band alignments are mapped in energy and momentum space using angle-resolved photoemission with a spatial resolution on the order of 500~nm (nanoARPES). We find that the SL WS$_2$ band offsets track the work function of the underlying SL and BL graphene, and we relate such changes to observed lateral patterns of exciton and trion luminescence from SL WS$_2$, demonstrating ultimate control of optoelectronic properties at the nanoscale.

cond-mat.mes-hall↗
arXiv2019

Giant magneto-optical Kerr enhancement from films on SiC due to the optical properties of the substrate

We report a giant enhancement of the mid-infrared (MIR) magneto-optical complex Kerr angle (polarization change of reflected light) in a variety of materials grown on SiC. In epitaxially-grown multilayer graphene, the Kerr angle is enhanced by a factor of 68, which is in good agreement with Kerr signal modeling. Strong Kerr enhancement is also observed in Fe films grown on SiC and Al-doped bulk SiC. Our experiments and modelling indicate that the enhancement occurs at the high-energy edge of the SiC reststrahlen band where the real component of the complex refractive index n passes through unity. Furthermore, since the signal is greatly enhanced when n=1, the enhancement is predicted to exist over the entire visible/infrared (IR) spectrum for a free-standing film. We also predict similar giant enhancement in both Faraday (transmission) and Kerr rotation for thin films on a metamaterial substrate with refractive index n=-1. This work demonstrates that the substrate used in MOKE measurements must be carefully chosen when investigating magneto-optical materials with weak MOKE signals or when designing MOKE-based optoelectronic devices.

cond-mat.mtrl-sci↗
arXiv2019

Resonant optical spin initialization and readout of single silicon vacancies in 4H-SiC

The silicon monovacancy in 4H-SiC is a promising candidate for solid-state quantum information processing. We perform high-resolution optical spectroscopy on single V2 defects at cryogenic temperatures. We find favorable low temperature optical properties that are essential for optical readout and coherent control of its spin and for the development of a spin-photon interface. The common features among individual defects include two narrow, nearly lifetime-limited optical transitions that correspond to $m_s{=}\pm 3/2$ and $m_s{=}\pm 1/2$ spin states with no discernable zero-field splitting fluctuations. Initialization and readout of the spin states is characterized by time-resolved optical spectroscopy under resonant excitation of these transitions, showing significant differences between the $\pm 3/2$ and $\pm 1/2$ spin states. These results are well-described by a theoretical model that strengthens our understanding of the quantum properties of this defect.

cond-mat.mes-hall↗
arXiv2018

Atmospheric doping effects in epitaxial graphene: correlation of local and global electrical measurements

We directly correlate the local (20-nm scale) and global electronic properties of a device containing mono-, bi- and tri-layer epitaxial graphene (EG) domains on 6H-SiC(0001) by simultaneously performing local surface potential measurements using Kelvin probe force microscopy and global transport measurements. Using well-controlled environmental conditions, where the starting state of the surface can be reproducibly defined, we investigate the doping effects of N2, O2, water vapour and NO2 at concentrations representative of the ambient air. We show that presence of O2, water vapour and NO2 leads to p-doping of all EG domains. However, the thicker layers of EG are significantly less affected by the atmospheric dopants. Furthermore, we demonstrate that the general consensus of O2 and water vapour present in ambient air providing majority of the p-doping to graphene is a common misconception. We experimentally show that even the combined effect of O2, water vapour, and NO2 at concentrations higher than typically present in the atmosphere does not fully replicate the state of the EG surface in ambient air. All doping effects can be reproducibly reversed by vacuum annealing. Thus, for EG gas sensors it is essential to consider naturally occurring environmental effects and properly separate them from those coming from targeted species.

cond-mat.mtrl-sci↗
arXiv2017

Ultra-broadband photodetectors based on epitaxial graphene quantum dots

Graphene is an ideal material for hot-electron bolometers, due to its low heat capacity and weak electron-phonon coupling. Nanostructuring graphene with quantum dot constrictions yields detectors with extraordinarily high intrinsic responsivity, higher than 1x10^9 V/W at 3K. The sensing mechanism is bolometric in nature: the quantum confinement gap causes a strong dependence of the electrical resistance on the electron temperature. Here we show that this quantum confinement gap does not impose a limitation on the photon energy for light detection and these quantum dot bolometers work in a very broad spectral range, from terahertz, through telecom to ultraviolet radiation, with responsivity independent of wavelength. We also measure the power dependence of the response. Although the responsivity decreases with increasing power, it stays higher than 1x10^8 V/W in a wide range of absorbed power, from 1 pW to 0.4 nW.

cond-mat.mes-hall↗
arXiv2016

Correlated Disorder in van der Waals Heterostructures

The individual building blocks of van der Waals (vdW) heterostructures host fascinating physical phenomena, ranging from ballistic electron transport in graphene to striking optical properties of MoSe2 sheets. The presence of bonded and non-bonded cohesive interactions in a vdW heterostructure, promotes diversity in their structural arrangements, which in turn profoundly modulate the properties of their individual constituents. Here, we report on the presence of correlated structural disorder coexisting with the nearly perfect crystallographic order along the growth direction of epitaxial vdW heterostructures of Bi2Se3/graphene/SiC. Using the depth penetration of X-ray diffraction microscopy and scattering, we probed their crystal structure from atomic to mesoscopic length scales, to reveal that their structural diversity is underpinned by spatially correlated disorder states. The presence of the latter induces on a system, widely considered to behave as a collection of nearly independent 2-dimensional units, a pseudo-3-dimensional character, when subjected to epitaxial constraints and ordered substrate interactions. These findings shed new light on the nature of the vast structural landscape of vdW heterostructures and could enable new avenues in modulating their unique properties by correlated disorder.

cond-mat.dis-nn↗
arXiv2015

Hybrid Metal-Graphene Plasmons for Tunable Terahertz Technology

Among its many outstanding properties, graphene supports terahertz surface plasma waves -- sub-wavelength charge density oscillations connected with electromagnetic fields that are tightly localized near the surface[1,2]. When these waves are confined to finite-sized graphene, plasmon resonances emerge that are characterized by alternating charge accumulation at the opposing edges of the graphene. The resonant frequency of such a structure depends on both the size and the surface charge density, and can be electrically tuned throughout the terahertz range by applying a gate voltage[3,4]. The promise of tunable graphene THz plasmonics has yet to be fulfilled, however, because most proposed optoelectronic devices including detectors, filters, and modulators[5-10] desire near total modulation of the absorption or transmission, and require electrical contacts to the graphene -- constraints that are difficult to meet using existing plasmonic structures. We report here a new class of plasmon resonance that occurs in a hybrid graphene-metal structure. The sub-wavelength metal contacts form a capacitive grid for accumulating charge, while the narrow interleaved graphene channels, to first order, serves as a tunable inductive medium, thereby forming a structure that is resonantly-matched to an incident terahertz wave. We experimentally demonstrate resonant absorption near the theoretical maximum in readily-available, large-area graphene, ideal for THz detectors and tunable absorbers. We further predict that the use of high mobility graphene will allow resonant THz transmission near 100%, realizing a tunable THz filter or modulator. The structure is strongly coupled to incident THz radiation, and solves a fundamental problem of how to incorporate a tunable plasmonic channel into a device with electrical contacts.

cond-mat.mes-hall↗
arXiv2014

Sensitive Room-Temperature Terahertz Detection via Photothermoelectric Effect in Graphene

Terahertz (THz) radiation has uses from security to medicine; however, sensitive room-temperature detection of THz is notoriously difficult. The hot-electron photothermoelectric effect in graphene is a promising detection mechanism: photoexcited carriers rapidly thermalize due to strong electron-electron interactions, but lose energy to the lattice more slowly. The electron temperature gradient drives electron diffusion, and asymmetry due to local gating or dissimilar contact metals produces a net current via the thermoelectric effect. Here we demonstrate a graphene thermoelectric THz photodetector with sensitivity exceeding 10 V/W (700 V/W) at room temperature and noise equivalent power less than 1100 pW/Hz^1/2 (20 pW/Hz^1/2), referenced to the incident (absorbed) power. This implies a performance which is competitive with the best room-temperature THz detectors for an optimally coupled device, while time-resolved measurements indicate that our graphene detector is eight to nine orders of magnitude faster than those. A simple model of the response, including contact asymmetries (resistance, work function and Fermi-energy pinning) reproduces the qualitative features of the data, and indicates that orders-of-magnitude sensitivity improvements are possible.

cond-mat.mes-hall↗
arXiv2014

Influence of Chemisorbed Oxygen on the Growth of Graphene on Cu(100) by Chemical Vapor Deposition

Understanding the influence that copper substrate surface symmetry and oxygen impurities have on the growth of graphene by chemical vapor deposition is important for developing techniques for producing high quality graphene. Therefore, we have studied the growth of graphene by catalytic decomposition of ethylene in an ultra-high vacuum chamber on both a clean Cu(100) surface and a Cu(100) surface pre-dosed with a layer of chemisorbed oxygen. The crystal structure of the graphene films was characterized with \emph{in-situ} low energy electron diffraction. By heating the clean Cu(100) substrate from room temperature to the growth temperature in ethylene, epitaxial graphene films were formed. The crystal quality was found to depend strongly on the growth temperature. At 900 $^\circ$C, well-ordered two-domain graphene films were formed. Pre-dosing the Cu(100) surface with a chemisorbed layer of oxygen before graphene growth was found to adversely affect the crystal quality of the graphene overlayer by inducing a much higher degree of rotational disorder of the graphene grains with respect to the Cu(100) substrate. The growth morphology of the graphene islands during the initial stages of nucleation was monitored with \emph{ex-situ} scanning electron microscopy. The nucleation rate of the graphene islands was observed to drop by an order of magnitude by pre-dosing the Cu(100) surface with a chemisorbed oxygen layer before growth. This reduction in nucleation rate results in the formation of much larger graphene islands. Therefore, the presence of oxygen during graphene growth affects both the relative orientation and average size of grains within the films grown on Cu(100) substrates.

cond-mat.mtrl-sci↗
arXiv2013

Graphene Nanoribbon Field-Effect Transistors on Wafer-Scale Epitaxial Graphene on SiC substrates

We report the realization of top-gated graphene nanoribbon field effect transistors (GNRFETs) of ~10 nm width on large-area epitaxial graphene exhibiting the opening of a band gap of ~0.14 eV. Contrary to prior observations of disordered transport and severe edge-roughness effects of GNRs, the experimental results presented here clearly show that the transport mechanism in carefully fabricated GNRFETs is conventional band-transport at room temperature, and inter-band tunneling at low temperature. The entire space of temperature, size, and geometry dependent transport properties and electrostatics of the GNRFETs are explained by a conventional thermionic emission and tunneling current model. Our combined experimental and modeling work proves that carefully fabricated narrow GNRs behave as conventional semiconductors, and remain potential candidates for electronic switching devices.

cond-mat.mes-hall↗