Searcharxiv⌕ Search

arXiv subjects

D. Le Mignant

Publications and source records attributed to D. Le Mignant.

At least 37 records · Page 2Linked to original sources

Euclid VI. NISP-P optical ghosts

The Near-Infrared Spectrometer and Photometer (NISP) onboard Euclid includes several optical elements in its path, which introduce artefacts into the data from non-nominal light paths. To ensure uncontaminated source photometry, these artefacts must be accurately accounted for. This paper focuses on two specific optical features in NISP's photometric data (NISP-P): ghosts caused by the telescope's dichroic beamsplitter, and the bandpass filters within the NISP fore-optics. Both ghost types exhibit a characteristic morphology and are offset from the originating stars. The offsets are well modelled using 2D polynomials, with only stars brighter than approximately 10 magnitudes in each filter producing significant ghost contributions. The masking radii for these ghosts depend on both the source-star brightness and the filter wavelength, ranging from 20 to 40 pixels. We present the final relations and models used in the near-infrared (NIR) data pipeline to mask these ghosts for Euclid's Quick Data Release (Q1).

astro-ph.IM↗

Euclid preparation. Overview of Euclid infrared detector performance from ground tests

The paper describes the objectives, design and findings of the pre-launch ground characterisation campaigns of the Euclid infrared detectors. The pixel properties, including baseline, bad pixels, quantum efficiency, inter pixel capacitance, quantum efficiency, dark current, readout noise, conversion gain, response nonlinearity, and image persistence were measured and characterised for each pixel. We describe in detail the test flow definition that allows us to derive the pixel properties and we present the data acquisition and data quality check software implemented for this purpose. We also outline the measurement protocols of all the pixel properties presented and we provide a comprehensive overview of the performance of the Euclid infrared detectors as derived after tuning the operating parameters of the detectors. The main conclusion of this work is that the performance of the infrared detectors Euclid meets the requirements. Pixels classified as non-functioning accounted for less than 0.2% of all science pixels. IPC coupling is minimal and crosstalk between adjacent pixels is less than 1% between adjacent pixels. 95% of the pixels show a QE greater than 80% across the entire spectral range of the Euclid mission. The conversion gain is approximately 0.52 ADU/e-, with a variation less than 1% between channels of the same detector. The reset noise is approximately equal to 23 ADU after reference pixels correction. The readout noise of a single frame is approximately 13 $e^-$ while the signal estimator noise is measured at 7 $e^-$ in photometric mode and 9 $e^-$ in spectroscopic acquisition mode. The deviation from linear response at signal levels up to 80 k$e^-$ is less than 5% for 95% of the pixels. Median persistence amplitudes are less than 0.3% of the signal, though persistence exhibits significant spatial variation and differences between detectors.

astro-ph.IM↗

Euclid: Quick Data Release (Q1) -- Watching ICM-selected galaxy clusters with Euclid eyes -- prospects of Euclid data in the context of large SZ and X-ray based surveys

Galaxy clusters detected through their X-ray emission or Sunyaev--Zeldovich effect (SZE), both produced by the intra-cluster medium (ICM), are key probes in cosmological and astrophysical studies. To maximise the scientific return of such surveys, complementary data are required for cluster confirmation and redshift estimation. This is typically provided by wide-field optical and infrared surveys, which are increasingly challenged by ongoing and future ICM-selected samples. In particular, at high redshifts ($z>1$) probed by upcoming SZE-selected samples, current large surveys may be insufficient for reliable confirmation. Deep, high-resolution infrared surveys like Euclid will thus be essential for confirming most high-redshift clusters. We present an analysis of the first sizeable Euclid dataset (Q1), overlapping with several ICM-selected cluster samples. We apply an adaptation of the MCMF cluster confirmation tool to estimate key properties, including redshift and richness, and to predict Euclid's capabilities for high-redshift cluster confirmation. We find promising performance, particularly at high redshifts, while richness estimates at low redshifts ($z<0.4$) are currently limited by Q1 data quality but should improve with future releases. Using MCMF runs on random lines of sight, we predict that Euclid will confirm clusters at $1<z<2$ as effectively as current optical surveys at $z<0.6$, significantly enhancing high-redshift confirmation. SZE-selected samples will thus greatly benefit from Euclid overlap. Among five known high-$z$ SZE clusters in Q1, we identify the highest-redshift jellyfish galaxy candidate to date, EUCLJ035330.86$-$504347.6 in SPT-CLJ0353$-$5043 ($z=1.32$), two massive star-forming galaxies near ACT-CLJ0350.0$-$4819 ($z=1.46$), and strong lensing features in SPT-CLJ0353$-$5043 and SPT-CLJ0421$-$4845.

astro-ph.CO↗

Performance of the image persistence model for Euclid infrared detectors

Large-format infrared detectors are at the heart of major ground and space-based astronomical instruments, and the HgCdTe HxRG is the most widely used. The Near Infrared Spectrometer and Photometer (NISP) of the ESA's Euclid mission launched in July 2023 hosts 16 H2RG detectors in the focal plane. Their performance relies heavily on the effect of image persistence, which results in residual images that can remain in the detector for a long time contaminating any subsequent observations. Deriving a precise model of image persistence is challenging due to the sensitivity of this effect to observation history going back hours or even days. Nevertheless, persistence removal is a critical part of image processing because it limits the accuracy of the derived cosmological parameters. We will present the empirical model of image persistence derived from ground characterization data, adapted to the Euclid observation sequence and compared with the data obtained during the in-orbit calibrations of the satellite.

astro-ph.IM↗

Euclid: Early Release Observations of ram-pressure stripping in the Perseus cluster. Detection of parsec scale star formation with in the low surface brightness stripped tails of UGC 2665 and MCG +07-07-070

Euclid is delivering optical and near-infrared imaging data over 14,000 deg$^2$ on the sky at spatial resolution and surface brightness levels that can be used to understand the morphological transformation of galaxies within groups and clusters. Using the Early Release Observations (ERO) of the Perseus cluster, we demonstrate the capability offered by Euclid in studying the nature of perturbations for galaxies in clusters. Filamentary structures are observed along the discs of two spiral galaxies with no extended diffuse emission expected from tidal interactions at surface brightness levels of $\sim$ $30\,{\rm mag}\,{\rm arcsec}^{-2}$. The detected features exhibit a good correspondence in morphology between optical and near-infrared wavelengths, with a surface brightness of $\sim$ $25\,{\rm mag}\,{\rm arcsec}^{-2}$, and the knots within the features have sizes of $\sim$ 100 pc, as observed through $I_E$ imaging. Using the Euclid, CFHT, UVIT, and LOFAR $144\,{\rm MHz}$ radio continuum observations, we conduct a detailed analysis to understand the origin of the detected features. We constructed the \textit{Euclid} $I_E-Y_E$, $Y_E-H_E$, and CFHT $u - r$, $g - i$ colour-colour plane and showed that these features contain recent star formation events, which are also indicated by their H$α$ and NUV emissions. Euclid colours alone are insufficient for studying stellar population ages in unresolved star-forming regions, which require multi-wavelength optical imaging data. The morphological shape, orientation, and mean age of the stellar population, combined with the presence of extended radio continuum cometary tails can be consistently explained if these features have been formed during a recent ram-pressure stripping event. This result further confirms the exceptional qualities of Euclid in the study of galaxy evolution in dense environments.

astro-ph.GA↗

Euclid preparation: TBD. Cosmic Dawn Survey: evolution of the galaxy stellar mass function across 0.2<z<6.5 measured over 10 square degrees

The Cosmic Dawn Survey Pre-launch (PL) catalogues cover an effective 10.13 deg$^{2}$ area with uniform deep Spitzer/IRAC data ($m\sim25$ mag, 5$σ$), the largest area covered to these depths in the infrared. These data are used to gain new insight into the growth of stellar mass across cosmic history by characterising the evolution of the galaxy stellar mass function (GSMF) through $0.2 < z \leq 6.5$. The total volume (0.62 Gpc$^{3}$) represents a tenfold increase compared to previous works that have explored $z > 3$ and significantly reduces cosmic variance, yielding strong constraints on the abundance of massive galaxies. Results are generally consistent with the literature but now provide firm estimates of number density where only upper limits were previously available. Contrasting the GSMF with the dark matter halo mass function suggests that massive galaxies ($M \gtrsim10^{11}$ M$_{\odot}$) at $z > 3.5$ required integrated star-formation efficiencies of $M/(M_{\rm h}f_{\rm b}) \gtrsim$ 0.25--0.5, in excess of the commonly-held view of ``universal peak efficiency" from studies on the stellar-to-halo mass relation (SHMR). Such increased efficiencies imply an evolving peak in the SHMR at $z > 3.5$ which can be maintained if feedback mechanisms from active galactic nuclei and stellar processes are ineffective at early times. In addition, a significant fraction of the most massive quiescent galaxies are observed to be in place already by $z\sim 2.5$--3. The apparent lack in change of their number density by $z\sim 0.2$ is consistent with relatively little mass growth from mergers. Utilising the unique volume, evidence for an environmental dependence of the galaxy stellar mass function is found all the way through $z\sim 3.5$ for the first time, though a more careful characterisation of the density field is ultimately required for confirmation.

astro-ph.GA↗

Euclid Quick Data Release (Q1) Ultracool dwarfs in the Euclid Deep Field North

Ultracool dwarfs (UCDs) encompass the lowest mass stars and brown dwarfs, defining the stellar substellar boundary. They have significant potential for advancing the understanding of substellar physics; however, these objects are challenging to detect due to their low luminosity. The wide coverage and deep sensitivity of the Euclid survey will increase the number of confirmed and well characterised UCDs by several orders of magnitude. In this study, we take advantage of the Euclid Quick Data Release (Q1) and in particular we look in detail at the known and new UCDs in the Euclid Deep Field North (22.9 deg2 down to JE = 24.5 mag), to understand the advantages of using the slitless Euclid spectroscopy. We compile a comparison sample of known UCDs and use their spectra to demonstrate the capability of Euclid to derive spectral types using a template matching method. This method is then applied to the spectra of the newly identified candidates. We confirm that 33 of these candidates are new UCDs, with spectral types ranging from M7 to T1 and JE = 17 to 21 mag. We look at their locus in colour colour diagrams and compare them with the expected colours of QSOs. A machine readable catalogue is provided for further study, containing both the comparison sample and the newly identified UCDs, along with their spectral classifications where the Q1 spectra quality allows for confident determination

astro-ph.SR↗

Euclid Quick Data Release (Q1). Combined Euclid and Spitzer galaxy density catalogues at $z>$ 1.3 and detection of significant Euclid passive galaxy overdensities in Spitzer overdense regions

Euclid will detect tens of thousands of clusters and protoclusters at $z$>1.3. With a total coverage of 63.1deg$^2$, the Euclid Quick Data Release 1 (Q1) is large enough to detect tens of clusters and hundreds of protoclusters at these early epochs. The Q1 photometric redshift catalogue enables us to detect clusters out to $z$ < 1.5; however, infrared imaging from Spitzer extends this limit to higher redshifts by using high local projected densities of Spitzer-selected galaxies as signposts for cluster and protocluster candidates. We use Spitzer imaging of the Euclid Deep Fields (EDFs) to derive densities for a sample of Spitzer-selected galaxies at redshifts $z$ > 1.3, building Spitzer IRAC1 and IRAC2 photometric catalogues that are 95% complete at a magnitude limit of IRAC2=22.2, 22.6, and 22.8 for the EDF-S, EDF-F, and EDF-N, respectively. We apply two complementary methods to calculate galaxy densities: (1) aperture and surface density; and (2) the Nth-nearest-neighbour method. When considering a sample selected at a magnitude limit of IRAC2 < 22.2, at which all three EDFs are 95% complete, our surface density distributions are consistent among the three EDFs and with the SpUDS blank field survey. We also considered a deeper sample (IRAC2 < 22.8), finding that 2% and 3% of the surface densities in the North and Fornax fields are 3$σ$ higher than the average field distribution and similar to densities found in the CARLA cluster survey. Our surface densities are also consistent with predictions from the GAEA semi-analytical model. Using combined Euclid and ground-based i-band photometry we show that our highest Spitzer-selected galaxy overdense regions, found at $z$~1.5, also host high densities of passive galaxies. This means that we measure densities consistent with those found in clusters and protoclusters at $z$>1.3.

astro-ph.CO↗

Euclid Quick Data Release (Q1). An investigation of optically faint, red objects in the Euclid Deep Fields

Our understanding of cosmic star-formation at $z>3$ used to largely rely on rest-frame UV observations. However, these observations overlook dusty and massive sources, resulting in an incomplete census of early star-forming galaxies. Recently, infrared data from Spitzer and the James Webb Space Telescope (JWST) have revealed a hidden population at $z\sim$3-6 with extreme red colours. Taking advantage of the overlap between imaging in the Euclid Deep Fields (EDFs), covering $\sim$ 60 deg$^2$, and ancillary Spitzer observations, we identified 27000 extremely red objects with $H_E-{\rm IRAC}2>2.25$ (dubbed HIEROs) down to a $10σ$ completeness magnitude limit of IRAC2 $=$ 22.5 AB. After a visual inspection to discard artefacts and objects with troubling photometry, we ended up with a final sample of 3900 candidates. We retrieved the physical parameter estimates for these objects from the SED-fitting tool CIGALE. Our results confirm that HIERO galaxies may populate the high-mass end of the stellar mass function at $z>3$, with some reaching extreme stellar masses ($M_*>10^{11}M_\odot$) and exhibiting high dust attenuation ($A_V>3$). However, we consider stellar mass estimates unreliable for $z>3.5$, favouring a lower-z solution. The challenges faced by SED-fitting tools in characterising these objects highlight the need for further studies, incorporating shorter-wavelength and spectroscopic data. Euclid spectra will help resolve degeneracies and better constrain the physical properties of the brightest galaxies. Given the extreme nature of this population, characterising these sources is crucial for understanding galaxy evolution. This work demonstrates Euclid's potential to provide statistical samples of rare, massive, dust-obscured galaxies at $z>3$, which will be prime targets for JWST, ALMA, and ELT.

astro-ph.GA↗

Euclid: Quick Data Release (Q1) -- Photometric studies of known transients

We report on serendipitous Euclid observations of previously known transients, using the Euclid Q1 data release. By cross-matching with the Transient Name Server (TNS) we identify 164 transients that coincide with the data release. Although the Euclid Q1 release only includes single-epoch data, we are able to make Euclid photometric measurements at the location of 161 of these transients. Euclid obtained deep photometric measurements or upper limits of these transients in the $I_E$, $Y_E$, $J_E$, and $H_E$ bands at various phases of the transient light-curves, including before, during, and after the observations of ground-based transient surveys. Approximately 70\% of known transients reported in the six months before the Euclid observation date and with discovery magnitude brighter than 24 were detected in Euclid $\IE$ images. Our observations include one of the earliest near-infrared detections of a Type~Ia supernova (SN 2024pvw) 15 days prior to its peak brightness, and the late-phase (435.9 days post peak) observations of the enigmatic core-collapse SN 2023aew. Euclid deep photometry provides valuable information on the nature of these transients such as their progenitor systems and power sources, with late time observations being a uniquely powerful contribution. In addition, Euclid is able to detect the host galaxies of some transients that were previously classed as hostless. The Q1 data demonstrate the power of the Euclid data even with only single-epoch observations available, as will be the case for much larger areas of sky in the Euclid Wide Survey.

astro-ph.SR↗

Euclid: Early Release Observations -- The Intracluster Light of Abell 2390

Intracluster light (ICL) provides a record of the dynamical interactions undergone by clusters, giving clues on cluster formation and evolution. Here, we analyse the properties of ICL in the massive cluster Abell 2390 at redshift z=0.228. Our analysis is based on the deep images obtained by the Euclid mission as part of the Early Release Observations in the near-infrared (Y, J, H bands), using the NISP instrument in a 0.75 deg$^2$ field. We subtracted a point--spread function (PSF) model and removed the Galactic cirrus contribution in each band after modelling it with the DAWIS software. We then applied three methods to detect, characterise, and model the ICL and the brightest cluster galaxy (BCG): the CICLE 2D multi-galaxy fitting; the DAWIS wavelet-based multiscale software; and a mask-based 1D profile fitting. We detect ICL out to 600 kpc. The ICL fractions derived by our three methods range between 18% and 36% (average of 24%), while the BCG+ICL fractions are between 21% and 41% (average of 29%), depending on the band and method. A galaxy density map based on 219 selected cluster members shows a strong cluster substructure to the south-east and a smaller feature to the north-west. Based on colours, the ICL (out to about 400 kpc) seems to be built by the accretion of small systems (M ~ $10^{9.5}$ solar mass), or from stars coming from the outskirts of Milky Way-type galaxies (M ~ $10^{10}$ solar mass). Though Abell 2390 does not seem to be undergoing a merger, it is not yet fully relaxed, since it has accreted two groups that have not fully merged with the cluster core. We estimate that the contributions to the inner 300 kpc of the ICL of the north-west and south-east subgroups are 21% and 9% respectively.

astro-ph.GA↗

The SPHERE infrared survey for exoplanets (SHINE). V. Complete observations, data reduction and analysis, detection performances, and final results

During the past decade, state-of-the-art planet-finder instruments like SPHERE@VLT, coupling coronagraphic devices and extreme adaptive optics systems, unveiled, thanks to large surveys, around 20 planetary mass companions at semi-major axis greater than 10 astronomical units. Direct imaging being the only detection technique to be able to probe this outer region of planetary systems, the SPHERE infrared survey for exoplanets (SHINE) was designed and conducted from 2015 to 2021 to study the demographics of such young gas giant planets around 400 young nearby solar-type stars. In this paper, we present the observing strategy, the data quality, and the point sources analysis of the full SHINE statistical sample as well as snapSHINE. Both surveys used the SPHERE@VLT instrument with the IRDIS dual band imager in conjunction with the integral field spectrograph IFS and the angular differential imaging observing technique. All SHINE data (650 datasets), corresponding to 400 stars, including the targets of the F150 survey, are processed in a uniform manner with an advanced post-processing algorithm called PACO ASDI. An emphasis is put on the classification and identification of the most promising candidate companions. Compared to the previous early analysis SHINE F150, the use of advanced post-processing techniques significantly improved by one or 2 magnitudes (x3-x6) the contrast detection limits, which will allow us to put even tighter constraints on the radial distribution of young gas giants. This increased sensitivity directly places SHINE as the largest and deepest direct imaging survey ever conducted. We detected and classified more than 3500 physical sources. One additional substellar companion has been confirmed during the second phase of the survey (HIP 74865 B), and several new promising candidate companions are awaiting second epoch confirmations.

astro-ph.EP↗

Euclid: The $r_{\rm b}$-$M_\ast$ relation as a function of redshift. I. The $5 \times 10^9 M_\odot$ black hole in NGC 1272

Core ellipticals, massive early-type galaxies have an almost constant inner surface brightness profile. The size of the core region correlates with the mass of the finally merged black hole. Here we report the first Euclid-based dynamical mass determination of a supermassive black hole. We study the centre of NGC 1272, the second most luminous elliptical galaxy in the Perseus cluster, combining the Euclid VIS photometry coming from the Early Release Observations of the Perseus cluster with VIRUS spectroscopic observations at the Hobby-Eberly Telescope. The core of NGC 1272 is detected on the Euclid VIS image. Its size is $1.29\pm 0.07''$ or 0.45 kpc, determined by fitting PSF-convolved core-Sérsic and Nuker-law functions. The two-dimensional stellar kinematics of the galaxy is measured from the VIRUS spectra by deriving optimally regularized non-parametric line-of-sight velocity distributions. Dynamical models of the galaxy are constructed using our axisymmetric and triaxial Schwarzschild codes. We measure a black hole mass of $(5\pm3) \times 10^9 M_\odot$, in line with the expectation from the $M_{\rm BH}$-$r_{\rm b}$ correlation, but eight times larger than predicted by the $M_{\rm BH}$-$σ$ correlation (at $1.8σ$ significance). The core size, rather than the velocity dispersion, allows one to select galaxies harboring the most massive black holes. The spatial resolution, wide area coverage, and depth of the \Euclid (Wide and Deep) surveys allow us to find cores of passive galaxies larger than 2 kpc up to redshift 1.

astro-ph.GA↗

Euclid: High-precision imaging astrometry and photometry from Early Release Observations. I. Internal kinematics of NGC 6397 by combining Euclid and Gaia data

The instruments at the focus of the Euclid space observatory offer superb, diffraction-limited imaging over an unprecedented (from space) wide field of view of 0.57 deg$^2$. This exquisite image quality has the potential to produce high-precision astrometry for point sources once the undersampling of Euclid's cameras is taken into account by means of accurate, effective point spread function (ePSF) modelling. We present a complex, detailed workflow to simultaneously solve for the geometric distortion (GD) and model the undersampled ePSFs of the Euclid detectors. Our procedure was successfully developed and tested with data from the Early Release Observations (ERO) programme focused on the nearby globular cluster NGC 6397. Our final one-dimensional astrometric precision for a well-measured star just below saturation is 0.7 mas (0.007 pixel) for the Visible Instrument (VIS) and 3 mas (0.01 pixel) for the Near-Infrared Spectrometer and Photometer (NISP). Finally, we present a specific scientific application of this high-precision astrometry: the combination of Euclid and Gaia data to compute proper motions and study the internal kinematics of NGC 6397. Future work, when more data become available, will allow for a better characterisation of the ePSFs and GD corrections that are derived here, along with assessment of their temporal stability, and their dependencies on the spectral energy distribution of the sources as seen through the wide-band filters of Euclid.

astro-ph.SR↗

Euclid. III. The NISP Instrument

The Near-Infrared Spectrometer and Photometer (NISP) on board the Euclid satellite provides multiband photometry and R>=450 slitless grism spectroscopy in the 950-2020nm wavelength range. In this reference article we illuminate the background of NISP's functional and calibration requirements, describe the instrument's integral components, and provide all its key properties. We also sketch the processes needed to understand how NISP operates and is calibrated, and its technical potentials and limitations. Links to articles providing more details and technical background are included. NISP's 16 HAWAII-2RG (H2RG) detectors with a plate scale of 0.3" pix^-1 deliver a field-of-view of 0.57deg^2. In photo mode, NISP reaches a limiting magnitude of ~24.5AB mag in three photometric exposures of about 100s exposure time, for point sources and with a signal-to-noise ratio (SNR) of 5. For spectroscopy, NISP's point-source sensitivity is a SNR = 3.5 detection of an emission line with flux ~2x10^-16erg/s/cm^2 integrated over two resolution elements of 13.4A, in 3x560s grism exposures at 1.6 mu (redshifted Ha). Our calibration includes on-ground and in-flight characterisation and monitoring of detector baseline, dark current, non-linearity, and sensitivity, to guarantee a relative photometric accuracy of better than 1.5%, and relative spectrophotometry to better than 0.7%. The wavelength calibration must be better than 5A. NISP is the state-of-the-art instrument in the NIR for all science beyond small areas available from HST and JWST - and an enormous advance due to its combination of field size and high throughput of telescope and instrument. During Euclid's 6-year survey covering 14000 deg^2 of extragalactic sky, NISP will be the backbone for determining distances of more than a billion galaxies. Its NIR data will become a rich reference imaging and spectroscopy data set for the coming decades.

astro-ph.IM↗

Euclid's Near-Infrared Spectrometer and Photometer ready for flight -- review of final performance

ESA's mission Euclid, while undertaking its final integration stage, is fully qualified. Euclid will perform an extragalactic survey ($0<z<2$) by observing in the visible and near-infrared wavelength range. To detect infrared radiation, it is equipped with the Near Infrared Spectrometer and Photometer (NISP) instrument, operating in the 0.9--2 $μ$m range. In this paper, after introducing the survey strategy, we focus our attention on the NISP Data Processing Unit's Application Software, highlighting the experimental process to obtain the final parametrization of the on-board processing of data produced by the array of 16 Teledyne HAWAII-2RG (HgCdTe) detectors. We report results from the latest ground test campaigns with the flight configuration hardware - complete optical system (Korsh anastigmat telescope), detectors array (0.56 deg$^2$ field of view), and readout systems (16 Digital Control Units and Sidecar ASICs). The performance of the on-board processing is then presented. We also describe a major issue found during the final test phase. We show how the problem was identified and solved thanks to an intensive coordinated effort of an independent review `Tiger' team, lead by ESA, and a team of NISP experts from the Euclid Consortium. An extended PLM level campaign at ambient temperature in Liège and a dedicated test campaign conducted in Marseille on the NISP EQM model eventually confirmed the resolution of the problem. Finally, we report examples of the outstanding spectrometric (using a Blue and two Red Grisms) and photometric performance of the NISP instrument, as derived from the end-to-end payload module test campaign at FOCAL 5 -- CSL; these results include the photometric Point Spread Function (PSF) determination and the spectroscopic dispersion verification.

astro-ph.IM↗

Euclid Near Infrared Spectrometer and Photometer instrument flight model presentation, performance and ground calibration results summary

The NISP (Near Infrared Spectrometer and Photometer) is one of the two Euclid instruments. It operates in the near-IR spectral region (950-2020nm) as a photometer and spectrometer. The instrument is composed of: a cold (135 K) optomechanical subsystem consisting of a Silicon carbide structure, an optical assembly, a filter wheel mechanism, a grism wheel mechanism, a calibration unit, and a thermal control system, a detection system based on a mosaic of 16 H2RG with their front-end readout electronic, and a warm electronic system (290 K) composed of a data processing / detector control unit and of an instrument control unit that interfaces with the spacecraft via a 1553 bus for command and control and via Spacewire links for science data. This paper presents: the final architecture of the flight model instrument and subsystems, and the performance and the ground calibration measurement done at NISP level and at Euclid Payload Module level at operational cold temperature.

astro-ph.IM↗

The SPHERE infrared survey for exoplanets (SHINE)- I Sample definition and target characterization

Large surveys with new-generation high-contrast imaging instruments are needed to derive the frequency and properties of exoplanet populations with separations from $\sim$5 to 300 AU. A careful assessment of the stellar properties is crucial for a proper understanding of when, where, and how frequently planets form, and how they evolve. The sensitivity of detection limits to stellar age makes this a key parameter for direct imaging surveys. We describe the SpHere INfrared survey for Exoplanets (SHINE), the largest direct imaging planet-search campaign initiated at the VLT in 2015 in the context of the SPHERE Guaranteed Time Observations of the SPHERE consortium. In this first paper we present the selection and the properties of the complete sample of stars surveyed with SHINE, focusing on the targets observed during the first phase of the survey (from February 2015 to February 2017). This early sample composed of 150 stars is used to perform a preliminary statistical analysis of the SHINE data, deferred to two companion papers presenting the survey performance, main discoveries, and the preliminary statistical constraints set by SHINE. Based on a large database collecting the stellar properties of all young nearby stars in the solar vicinity (including kinematics, membership to moving groups, isochrones, lithium abundance, rotation, and activity), we selected the original sample of 800 stars that were ranked in order of priority according to their sensitivity for planet detection in direct imaging with SPHERE. The properties of the stars that are part of the early statistical sample were revisited, including for instance measurements from the GAIA Data Release 2.

astro-ph.EP↗