arXiv subjects

D. Loreggia

Publications and source records attributed to D. Loreggia.

12 recordsLinked to original sources

arXiv2025

The ASPIICS solar coronagraph aboard the Proba-3 formation flying mission. Scientific objectives and instrument design

We describe the scientific objectives and instrument design of the ASPIICS coronagraph launched aboard the Proba-3 mission of the European Space Agency (ESA) on 5 December 2024. Proba-3 consists of two spacecraft in a highly elliptical orbit around the Earth. One spacecraft carries the telescope, and the external occulter is mounted on the second spacecraft. The two spacecraft fly in a precise formation during 6 hours out of 19.63 hour orbit, together forming a giant solar coronagraph called ASPIICS (Association of Spacecraft for Polarimetric and Imaging Investigation of the Corona of the Sun). Very long distance between the external occulter and the telescope (around 144 m) represents an increase of two orders of magnitude compared to classical externally occulted solar coronagraphs. This allows us to observe the inner corona in eclipse-like conditions, i.e. close to the solar limb (down to 1.099 Rs) and with very low straylight. ASPIICS will provide a new perspective on the inner solar corona that will help solve several outstanding problems in solar physics, such as the origin of the slow solar wind and physical mechanism of coronal mass ejections.

astro-ph.SR↗

arXiv2018

The Acquisition Camera System for SOXS at NTT

SOXS (Son of X-Shooter) will be the new medium resolution (R$\sim$4500 for a 1 arcsec slit), high-efficiency, wide band spectrograph for the ESO-NTT telescope on La Silla. It will be able to cover simultaneously optical and NIR bands (350-2000nm) using two different arms and a pre-slit Common Path feeding system. SOXS will provide an unique facility to follow up any kind of transient event with the best possible response time in addition to high efficiency and availability. Furthermore, a Calibration Unit and an Acquisition Camera System with all the necessary relay optics will be connected to the Common Path sub-system. The Acquisition Camera, working in optical regime, will be primarily focused on target acquisition and secondary guiding, but will also provide an imaging mode for scientific photometry. In this work we give an overview of the Acquisition Camera System for SOXS with all the different functionalities. The optical and mechanical design of the system are also presented together with the preliminary performances in terms of optical quality, throughput, magnitude limits and photometric properties.

astro-ph.IM↗

arXiv2018

SOXS: a wide band spectrograph to follow up transients

SOXS (Son Of X-Shooter) will be a spectrograph for the ESO NTT telescope capable to cover the optical and NIR bands, based on the heritage of the X-Shooter at the ESO-VLT. SOXS will be built and run by an international consortium, carrying out rapid and longer term Target of Opportunity requests on a variety of astronomical objects. SOXS will observe all kind of transient and variable sources from different surveys. These will be a mixture of fast alerts (e.g. gamma-ray bursts, gravitational waves, neutrino events), mid-term alerts (e.g. supernovae, X-ray transients), fixed time events (e.g. close-by passage of minor bodies). While the focus is on transients and variables, still there is a wide range of other astrophysical targets and science topics that will benefit from SOXS. The design foresees a spectrograph with a Resolution-Slit product ~ 4500, capable of simultaneously observing over the entire band the complete spectral range from the U- to the H-band. The limiting magnitude of R~20 (1 hr at S/N~10) is suited to study transients identified from on-going imaging surveys. Light imaging capabilities in the optical band (grizy) are also envisaged to allow for multi-band photometry of the faintest transients. This paper outlines the status of the project, now in Final Design Phase.

astro-ph.IM↗

arXiv2016

The new SOXS instrument for the ESO NTT

SOXS (Son Of X-Shooter) will be a unique spectroscopic facility for the ESO-NTT 3.5-m telescope in La Silla (Chile), able to cover the optical/NIR band (350-1750 nm). The design foresees a high-efficiency spectrograph with a resolution-slit product of ~4,500, capable of simultaneously observing the complete spectral range 350 - 1750 nm with a good sensitivity, with light imaging capabilities in the visible band. This paper outlines the status of the project.

astro-ph.IM↗

arXiv2008

System overview of the VLTI Spectro-Imager

The VLTI Spectro Imager project aims to perform imaging with a temporal resolution of 1 night and with a maximum angular resolution of 1 milliarcsecond, making best use of the Very Large Telescope Interferometer capabilities. To fulfill the scientific goals (see Garcia et. al.), the system requirements are: a) combining 4 to 6 beams; b) working in spectral bands J, H and K; c) spectral resolution from R= 100 to 12000; and d) internal fringe tracking on-axis, or off-axis when associated to the PRIMA dual-beam facility. The concept of VSI consists on 6 sub-systems: a common path distributing the light between the fringe tracker and the scientific instrument, the fringe tracker ensuring the co-phasing of the array, the scientific instrument delivering the interferometric observables and a calibration tool providing sources for internal alignment and interferometric calibrations. The two remaining sub-systems are the control system and the observation support software dedicated to the reduction of the interferometric data. This paper presents the global concept of VSI science path including the common path, the scientific instrument and the calibration tool. The scientific combination using a set of integrated optics multi-way beam combiners to provide high-stability visibility and closure phase measurements are also described. Finally we will address the performance budget of the global VSI instrument. The fringe tracker and scientific spectrograph will be shortly described.

astro-ph↗

arXiv2008

Near-IR Spectrograph for VSI (VLTI Spectro Imager): dispersing the light from an integrated optics beam-combiner

We present the optical and cryo-mechanical solutions for the Spectrograph of VSI (VLTI Spectro-Imager), the second generation near-infrared (J, H and K bands) interferometric instrument for the VLTI. The peculiarity of this spectrograph is represented by the Integrated Optics (IO) beam-combiner, a small and delicate component which is located inside the cryostat and makes VSI capable to coherently combine 4, 6 or even 8 telescopes. The optics have been specifically designed to match the IO combiner output with the IR detector still preserving the needed spatial and spectral sampling, as well as the required fringe spacing. A compact device that allows us to interchange spectral resolutions (from R=200 to R=12000), is also presented.

astro-ph↗

arXiv2008

Fringe Tracker for the VLTI Spectro-Imager

The implementation of the simultaneous combination of several telescopes (from four to eight) available at Very Large Telescope Interferometer (VLTI) will allow the new generation interferometric instrumentation to achieve interferometric image synthesis with unprecedented resolution and efficiency. The VLTI Spectro Imager (VSI) is the proposed second-generation near-infrared multi-beam instrument for the Very Large Telescope Interferometer, featuring three band operations (J, H and K), high angular resolutions (down to 1.1 milliarcsecond) and high spectral resolutions. VSI will be equipped with its own internal Fringe Tracker (FT), which will measure and compensate the atmospheric perturbations to the relative beam phase, and in turn will provide stable and prolonged observing conditions down to the magnitude K=13 for the scientific combiner. In its baseline configuration, VSI FT is designed to implement, from the very start, the minimum redundancy combination in a nearest neighbor scheme of six telescopes over six baselines, thus offering better options for rejection of large intensity or phase fluctuations over each beam, due to the symmetric set-up. The planar geometry solution of the FT beam combiner is devised to be easily scalable either to four or eight telescopes, in accordance to the three phase development considered for VSI. The proposed design, based on minimum redundancy combination and bulk optics solution, is described in terms of opto-mechanical concept, performance and key operational aspects.

astro-ph↗

arXiv2008

VSI: the VLTI spectro-imager

The VLTI Spectro Imager (VSI) was proposed as a second-generation instrument of the Very Large Telescope Interferometer providing the ESO community with spectrally-resolved, near-infrared images at angular resolutions down to 1.1 milliarcsecond and spectral resolutions up to R=12000. Targets as faint as K=13 will be imaged without requiring a brighter nearby reference object. The unique combination of high-dynamic-range imaging at high angular resolution and high spectral resolution enables a scientific program which serves a broad user community and at the same time provides the opportunity for breakthroughs in many areas of astrophysic including: probing the initial conditions for planet formation in the AU-scale environments of young stars; imaging convective cells and other phenomena on the surfaces of stars; mapping the chemical and physical environments of evolved stars, stellar remnants, and stellar winds; and disentangling the central regions of active galactic nuclei and supermassive black holes. VSI will provide these new capabilities using technologies which have been extensively tested in the past and VSI requires little in terms of new infrastructure on the VLTI. At the same time, VSI will be able to make maximum use of new infrastructure as it becomes available; for example, by combining 4, 6 and eventually 8 telescopes, enabling rapid imaging through the measurement of up to 28 visibilities in every wavelength channel within a few minutes. The current studies are focused on a 4-telescope version with an upgrade to a 6-telescope one. The instrument contains its own fringe tracker and tip-tilt control in order to reduce the constraints on the VLTI infrastructure and maximize the scientific return.

astro-ph↗

arXiv2008

Milli-arcsecond astrophysics with VSI, the VLTI spectro-imager in the ELT era

Nowadays, compact sources like surfaces of nearby stars, circumstellar environments of stars from early stages to the most evolved ones and surroundings of active galactic nuclei can be investigated at milli-arcsecond scales only with the VLT in its interferometric mode. We propose a spectro-imager, named VSI (VLTI spectro-imager), which is capable to probe these sources both over spatial and spectral scales in the near-infrared domain. This instrument will provide information complementary to what is obtained at the same time with ALMA at different wavelengths and the extreme large telescopes.

astro-ph↗

arXiv2007

A simple beam combination for stellar interferometry

In stellar interferometry, image quality improves significantly with the inclusion of more telescopes and the use of phase closure. We demonstrate, using first coherent and then partially coherent white light, a compact and efficient pair-wise combination of twelve or more beams. The input beams are lined up and spread through a cylindrical lens into a comb of parallel ellipses, which interferes with a perpendicular copy of itself to form a matrix of interferograms between all pairs. The diagonal elements show interference of each beam with itself, for in-tensity calibration. The measured white-light visibilities were high and stable.

astro-ph↗

arXiv2005

Chromaticity in all-reflective telescopes for astrometry

Chromatic effects are usually associated with refractive optics, so reflective telescopes are assumed to be free from them. We show that all-reflective optics still bears significant levels of such perturbations, which is especially critical to modern micro-arcsecond astrometric experiments. We analyze the image formation and measurement process to derive a precise definition of the chromatic variation of the image position, and we evaluate the key aspects of optical design with respect to chromaticity. The fundamental requirement related to chromaticity is the symmetry of the optical design and of the wavefront errors. Finally, we address some optical engineering issues, such as manufacturing and alignment, providing recommendations to minimize the degradation that chromaticity introduces into astrometry.

astro-ph↗

arXiv2001

A Dynamical Mass Constraint for Pre-Main-Sequence Evolutionary Tracks: The Binary NTT 045251+3016

We present an astrometric/spectroscopic orbital solution for the pre-main-sequence binary NTT 045251+3016. Our measurements for the primary and secondary masses are 1.45 +/- 0.19 M_sun and 0.81 +/- 0.09 M_sun, respectively, and 145 +/- 8 pc for the distance of the system, consistent with prior estimates for the Taurus-Auriga star-forming region. The evolutionary tracks of D'Antona & Mazzitelli (1997), Baraffe et al. (1998), and Palla & Stahler (1999) are tested against these dynamical mass measurements. Due to the intrinsic color/T_eff variation within the K5 spectral class, each pre-main-sequence model provides a mass range for the primary. The theoretical mass range derived from the Baraffe et al. (1998) tracks that use a mixing length parameter alpha=1.0 is closest to our measured primary mass, deviating between 1.3 and 1.6 sigma. The set of Baraffe et al. (1998) tracks that use alpha=1.9 deviate between 1.6 and 2.1 sigma from our measured primary mass. The mass range given by the Palla & Stahler (1999) tracks for the primary star deviate between 1.6 and 2.9 sigma. The D'Antona & Mazzitelli (1997) tracks give a mass range that deviates by at least 3.0 sigma from our derived primary mass, strongly suggesting that these tracks are inconsistent with our observation. Observations of the secondary are less constraining than those of the primary, but the deviations between the dynamical mass of the secondary and the mass inferred for the secondary from the various pre-main-sequence tracks mirror the deviations of the primary star. All of the pre-main-sequence tracks are consistent with coevality of the components of NTT 045251+3016.

astro-ph↗