SearcharxivSearch

arXiv subjects

D. M. Feldmann

Publications and source records attributed to D. M. Feldmann.

6 recordsLinked to original sources

Dynamics of single vortices in grain boundaries: I-V characteristics on the femto-volt scale

We employed a scanning Hall probe microscope to detect the hopping of individual vortices between pinning sites along grain boundaries in YBCO thin films in the presence of an applied current. Detecting the motion of individual vortices allowed us to probe the current-voltage (I-V) characteristics of the grain boundary with voltage sensitivity below a femto-volt. We find a very sharp onset of dissipation with V~I^n with an unprecedented high exponent of n~290 that shows essentially no dependence on temperature or grain boundary angle. Our data have no straightforward explanation within the existing grain boundary transport models.

cond-mat.supr-con

Suppression of vortex channeling in meandered YBa2Cu3O7-d grain boundaries

We report on the in-plane magnetic field (H) dependence of the critical current density (Jc) in meandered and planar single grain boundaries (GBs) isolated in YBa2Cu3O7-d (YBCO) coated conductors. The Jc(H)properties of the planar GB are consistent with those previously seen in single GBs of YBCO films grown on SrTiO3 bi-crystals. In the straight boundary a characteristic flux channeling regime when H is oriented near the GB plane, associated with a reduced Jc, is seen. The meandered GB does not show vortex channeling since it is not possible for a sufficient length of vortex line to lie within it.

cond-mat.supr-con

Resolution of two-dimensional Currents in Superconductors from a two-dimensional magnetic field measurement by the method of regularization

The problem of reconstructing a two-dimensional (2D) current distribution in a superconductor from a 2D magnetic field measurement is recognized as a first-kind integral equation and resolved using the method of Regularization. Regularization directly addresses the inherent instability of this inversion problem for non-exact (noisy) data. Performance of the technique is evaluated for different current distributions and for data with varying amounts of added noise. Comparisons are made to other methods, and the present method is demonstrated to achieve a better regularizing (noise filtering) effect while also employing the generalized-cross validation (GCV) method to choose the optimal regularization parameter from the data, without detailed knowledge of the true (and generally unknown) solution. It is also shown that clean, noiseless data is an ineffective test of an inversion algorithm.

cond-mat.supr-con

Through-thickness superconducting and normal-state transport properties revealed by thinning of thick film ex situ YBa2Cu3O7-x coated conductors

A rapid decrease in the critical current density (Jc) of YBa2Cu3O7-x (YBCO) films with increasing film thickness has been observed for multiple YBCO growth processes. While such behavior is predicted from 2D collective pinning models under certain assumptions, empirical observations of the thickness dependence of Jc are believed to be largely processing dependent at present. To investigate this behavior in ex situ YBCO films, 2.0 and 2.9 um thick YBCO films on ion beam assisted deposition (IBAD) - yttria stabilized zirconia (YSZ) substrates were thinned and repeatedly measured for rho(T) and Jc(H). The 2.9 um film exhibited a constant Jc(77K,SF) through thickness of ~1 MA/cm2 while the 2.0 um film exhibited an increase in Jc(77K,SF) as it was thinned. Neither film offered evidence of significant dead layers, suggesting that further increases in critical current can be obtained by growing thicker YBCO layers.

cond-mat.supr-con

Local Measurement of Current Density by Magneto-Optical Current Reconstruction in Normally and Overpressure Processed Bi-2223 Tapes

Magneto-optical current reconstruction has been used for detailed analysis of the local critical current density (Jc) variation in monocore Bi-2223 tapes. We find, even in high quality tapes with bulk transport Jc ~ 40 kA/cm^2 (77K, 0T), that there exist local regions which possess current densities of more than 200 kA/cm^2. Overpressure processing at 148 bar significantly improved Jc to 48 kA/cm^2 by improving the connectivity. For the overpressure-processed sample we find that the current distribution is more uniform and that the maximum local current density at 77 K is increased almost to 300 kA/cm^2.

cond-mat.supr-con

Strongly linked current flow in polycrystalline forms of the new superconductor MgB2

The discovery of superconductivity at 39 K in MgB2[1] raises many issues. One of the central questions is whether this new superconductor resembles a high-temperature-cuprate superconductor or a low-temperature metallic superconductor in terms of its current carrying characteristics in applied magnetic fields. In spite of the very high transition temperatures of the cuprate superconductors, their performance in magnetic fields has several drawbacks[2]. Their large anisotropy restricts high bulk current densities to much less than the full magnetic field-temperature (H-T) space over which superconductivity is found. Further, weak coupling across grain boundaries makes transport current densities in untextured polycrystalline forms low and strongly magnetic field sensitive[3,4]. These studies of MgB2 address both issues. In spite of the multi-phase, untextured, nano-scale sub-divided nature of our samples, supercurrents flow throughout without the strong sensitivity to weak magnetic fields characteristic of Josephson-coupled grains[3]. Magnetization measurements over nearly all of the superconducting H-T plane show good temperature scaling of the flux pinning force, suggestive of a current density determined by flux pinning. At least two length scales are suggested by the magnetization and magneto optical (MO) analysis but the cause of this seems to be phase inhomogeneity, porosity, and minority insulating phase such as MgO rather than by weakly coupled grain boundaries. Our results suggest that polycrystalline ceramics of this new class of superconductor will not be compromised by the weak link problems of the high temperature superconductors, a conclusion with enormous significance for applications if higher temperature analogs of this compound can be discovered.

cond-mat.supr-con