SearcharxivSearch

arXiv subjects

D. M. Tennant

Publications and source records attributed to D. M. Tennant.

6 recordsLinked to original sources

Decoherence of a tunable capacitively shunted flux qubit

Quantum annealing is a method to solve optimization problems that leverages quantum tunneling in a coupled qubit system. We present a detailed study of the coherence of a tunable capacitively-shunted flux qubit, designed for coherent quantum annealing applications. We find that for high qubit frequencies, thermal noise in the bias line makes a significant contribution to the relaxation, arising from the design choice to experimentally explore both fast annealing and high-frequency control. The measured dephasing rate is primarily due to intrinsic low-frequency flux noise in the two qubit loops, with additional contribution from the low-frequency noise of control electronics used for fast annealing. Our results characterize decoherence in a realistic setup for quantum annealing and are relevant for ongoing efforts toward building superconducting quantum annealers with increased coherence.

quant-ph

Dissipative Landau-Zener tunneling in the crossover regime from weak to strong environment coupling

Landau-Zener tunneling, which describes the transition in a two-level system during a sweep through an anti-crossing, is a model applicable to a wide range of physical phenomena. Realistic quantum systems are affected by dissipation due to coupling to their environments. An important aspect of understanding such open quantum systems is the relative energy scales of the system itself and the system-environment coupling, which distinguishes the weak- and strong-coupling regimes. Using a tunable superconducting flux qubit, we observe the crossover from weak to strong coupling to the environment in Landau-Zener tunneling. Our results confirm previous theoretical studies of dissipative Landau-Zener tunneling in the weak and strong coupling limits. We devise a spin bath model that effectively captures the crossover regime. This work is relevant for understanding the role of dissipation in quantum annealing, where the system is expected to go through a cascade of Landau-Zener transitions before reaching the target state.

quant-ph

Two-Level Systems in Nucleated and Non-Nucleated Epitaxial alpha-Tantalum films

Building usefully coherent superconducting quantum processors depends on reducing losses in their constituent materials. Tantalum, like niobium, has proven utility as the primary superconducting layer within highly coherent qubits. But, unlike Nb, high temperatures are typically used to stabilize the desirable body-centered-cubic phase, alpha-Ta, during thin film deposition. It has long been known that a thin Nb layer permits the room-temperature nucleation of alpha-Ta, although neither an epitaxial process nor few-photon microwave loss measurements have been reported for Nb-nucleated Ta films prior to this study. We compare resonators patterned from Ta films grown at high temperature (500 °C) and films nucleated at room temperature, in order to understand the impact of crystalline order on quantum coherence. In both cases, films grew with Al2O3 (001) || Ta (110) indicating that the epitaxial orientation is independent of temperature and is preserved across the Nb/Ta interface. We use conventional low-power spectroscopy to measure two level system (TLS) loss, as well as an electric-field bias technique to measure the effective dipole moments of TLS in the surfaces of resonators. In our measurements, Nb-nucleated Ta resonators had greater loss tangent (1.5 +/- 0.1 x 10^-5) than non-nucleated (5 +/- 1 x 10^-6) in approximate proportion to defect densities as characterized by X-ray diffraction (0.27 ° vs 0.18 ° [110] reflection width) and electron microscopy (30 nm vs 70 nm domain size). The dependence of the loss tangent on domain size indicates that the development of more ordered Ta films is likely to lead to improvements in qubit coherence times. Moreover, low-temperature alpha-Ta epitaxy may enable the growth of new, microstate-free heterostructures which would not withstand high temperature processing.

cond-mat.supr-con

Noise-specific beats in the higher-level Ramsey curves of a transmon qubit

In the higher levels of superconducting transmon devices, and more generally charge sensitive devices, $T_2^*$ measurements made in the presence of low-frequency time-correlated $1/f$ charge noise and quasiparticle-induced parity flips can give an underestimation of the total dephasing time. The charge variations manifest as beating patterns observed in the overlay of several Ramsey fringe curves, and are reproduced with a phenomenological Ramsey curve model which accounts for the charge variations. $T_2^*$ dephasing times which more accurately represent the total dephasing time are obtained. The phenomenological model is compared with a Lindblad master equation model. Both models are found to be in agreement with one another and the experimental data. Finally, the phenomenological formulation enables a simple method in which the power spectral density (PSD) for the low-frequency noise can be inferred from the overlay of several Ramsey curves.

quant-ph

Calibration of flux crosstalk in large-scale flux-tunable superconducting quantum circuits

Magnetic flux tunability is an essential feature in most approaches to quantum computing based on superconducting qubits. Independent control of the fluxes in multiple loops is hampered by crosstalk. Calibrating flux crosstalk becomes a challenging task when the circuit elements interact strongly. We present a novel approach to flux crosstalk calibration, which is circuit model independent and relies on an iterative process to gradually improve calibration accuracy. This method allows us to reduce errors due to the inductive coupling between loops. The calibration procedure is automated and implemented on devices consisting of tunable flux qubits and couplers with up to 27 control loops. We devise a method to characterize the calibration error, which is used to show that the errors of the measured crosstalk coefficients are all below 0.17%.

quant-ph

Measurements of Gated Conjugated Polymer with Electrode Spacing Down to Several Nanometers

In this letter we describe electronic measurements of a conjugated polymer of phenylenevinylene (PPV) with electrode spacings down to 20 nm; all measurements are made in a gated transistor geometry. With rectangular electrodes we find that the current is fit by an exponential in the applied electric field for spacings between 50 nm and 2um. Based on this finding we conclude that the current is not injection limited, and is concentrated in a very small region; we also discuss possible transport mechanisms. The calculated mobility appears exponential in the electric field rather than in the square root of field. We also show fabricated triangular electrodes with spacings down to 5 nm, and discuss measurements with spacings down to 20 nm in which a single chain of polymer may dominate the conductance.

cond-mat.mes-hall