arXiv subjects

D. M. Zumbühl

Publications and source records attributed to D. M. Zumbühl.

At least 19 recordsLinked to original sources

arXiv2021

Bridging the reality gap in quantum devices with physics-aware machine learning

The discrepancies between reality and simulation impede the optimisation and scalability of solid-state quantum devices. Disorder induced by the unpredictable distribution of material defects is one of the major contributions to the reality gap. We bridge this gap using physics-aware machine learning, in particular, using an approach combining a physical model, deep learning, Gaussian random field, and Bayesian inference. This approach has enabled us to infer the disorder potential of a nanoscale electronic device from electron transport data. This inference is validated by verifying the algorithm's predictions about the gate voltage values required for a laterally-defined quantum dot device in AlGaAs/GaAs to produce current features corresponding to a double quantum dot regime.

cond-mat.mes-hall↗

arXiv2021

Cross-architecture Tuning of Silicon and SiGe-based Quantum Devices Using Machine Learning

The potential of Si and SiGe-based devices for the scaling of quantum circuits is tainted by device variability. Each device needs to be tuned to operation conditions. We give a key step towards tackling this variability with an algorithm that, without modification, is capable of tuning a 4-gate Si FinFET, a 5-gate GeSi nanowire and a 7-gate SiGe heterostructure double quantum dot device from scratch. We achieve tuning times of 30, 10, and 92 minutes, respectively. The algorithm also provides insight into the parameter space landscape for each of these devices. These results show that overarching solutions for the tuning of quantum devices are enabled by machine learning.

cond-mat.mes-hall↗

arXiv2021

Ultrafast Hole Spin Qubit with Gate-Tunable Spin-Orbit Switch

A key challenge in quantum computation is the implementation of fast and local qubit control while simultaneously maintaining coherence. Qubits based on hole spins offer, through their strong spin-orbit interaction, a way to implement fast quantum gates. Strikingly, for hole spins in one-dimensional germanium and silicon devices, the spin-orbit interaction has been predicted to be exceptionally strong yet highly tunable with gate voltages. Such electrical control would make it possible to switch on demand between qubit idling and manipulation modes. Here, we demonstrate ultrafast and universal quantum control of a hole spin qubit in a germanium/silicon core/shell nanowire, with Rabi frequencies of several hundreds of megahertz, corresponding to spin-flipping times as short as ~1 ns - a new record for a single-spin qubit. Next, we show a large degree of electrical control over the Rabi frequency, Zeeman energy, and coherence time - thus implementing a switch toggling from a rapid qubit manipulation mode to a more coherent idling mode. We identify an exceptionally strong but gate-tunable spin-orbit interaction as the underlying mechanism, with a short associated spin-orbit length that can be tuned over a large range down to 3 nm for holes of heavy-hole mass. Our work demonstrates a spin-orbit qubit switch and establishes hole spin qubits defined in one-dimensional germanium/silicon nanostructures as a fast and highly tunable platform for quantum computation.

cond-mat.mes-hall↗

arXiv2020

Deep Reinforcement Learning for Efficient Measurement of Quantum Devices

Deep reinforcement learning is an emerging machine learning approach which can teach a computer to learn from their actions and rewards similar to the way humans learn from experience. It offers many advantages in automating decision processes to navigate large parameter spaces. This paper proposes a novel approach to the efficient measurement of quantum devices based on deep reinforcement learning. We focus on double quantum dot devices, demonstrating the fully automatic identification of specific transport features called bias triangles. Measurements targeting these features are difficult to automate, since bias triangles are found in otherwise featureless regions of the parameter space. Our algorithm identifies bias triangles in a mean time of less than 30 minutes, and sometimes as little as 1 minute. This approach, based on dueling deep Q-networks, can be adapted to a broad range of devices and target transport features. This is a crucial demonstration of the utility of deep reinforcement learning for decision making in the measurement and operation of quantum devices.

cond-mat.mes-hall↗

arXiv2020

Strong spin-orbit interaction and $g$-factor renormalization of hole spins in Ge/Si nanowire quantum dots

The spin-orbit interaction lies at the heart of quantum computation with spin qubits, research on topologically non-trivial states, and various applications in spintronics. Hole spins in Ge/Si core/shell nanowires experience a spin-orbit interaction that has been predicted to be both strong and electrically tunable, making them a particularly promising platform for research in these fields. We experimentally determine the strength of spin-orbit interaction of hole spins confined to a double quantum dot in a Ge/Si nanowire by measuring spin-mixing transitions inside a regime of spin-blockaded transport. We find a remarkably short spin-orbit length of $\sim$65 nm, comparable to the quantum dot length and the interdot distance. We additionally observe a large orbital effect of the applied magnetic field on the hole states, resulting in a large magnetic field dependence of the spin-mixing transition energies. Strikingly, together with these orbital effects, the strong spin-orbit interaction causes a significant enhancement of the $g$-factor with magnetic field.The large spin-orbit interaction strength demonstrated is consistent with the predicted direct Rashba spin-orbit interaction in this material system and is expected to enable ultrafast Rabi oscillations of spin qubits and efficient qubit-qubit interactions, as well as provide a platform suitable for studying Majorana zero modes.

cond-mat.mes-hall↗

arXiv2020

Radio-frequency reflectometry of a quantum dot using an ultra-low-noise SQUID amplifier

Fault-tolerant spin-based quantum computers will require fast and accurate qubit readout. This can be achieved using radio-frequency reflectometry given sufficient sensitivity to the change in quantum capacitance associated with the qubit states. Here, we demonstrate a 23-fold improvement in capacitance sensitivity by supplementing a cryogenic semiconductor amplifier with a SQUID preamplifier. The SQUID amplifier operates at a frequency near 200 MHz and achieves a noise temperature below 600 mK when integrated into a reflectometry circuit, which is within a factor 120 of the quantum limit. It enables a record sensitivity to capacitance of 0.07 aF/\sqrt{Hz}. The setup is used to acquire charge stability diagrams of a gate-defined double quantum dot in a short time with a signal-to-noise ration of about 38 in 1 microsecond of integration time.

quant-ph↗

arXiv2020

Progress in cooling nanoelectronic devices to ultra-low temperatures

Here we review recent progress in cooling micro/nanoelectronic devices significantly below 10 mK. A number of groups worldwide are working to produce sub-millikelvin on-chip electron temperatures, motivated by the possibility of observing new physical effects and improving the performance of quantum technologies, sensors and metrological standards. The challenge is a longstanding one, with the lowest reported on-chip electron temperature having remained around 4 mK for more than 15 years. This is despite the fact that microkelvin temperatures have been accessible in bulk materials since the mid 20th century. In this review we describe progress made in the last five years using new cooling techniques. Developments have been driven by improvements in the understanding of nanoscale physics, material properties and heat flow in electronic devices at ultralow temperatures, and have involved collaboration between universities and institutes, physicists and engineers. We hope that this review will serve as a summary of the current state-of-the-art, and provide a roadmap for future developments. We focus on techniques that have shown, in experiment, the potential to reach sub-millikelvin electron temperatures. In particular, we focus on on-chip demagnetisation refrigeration. Multiple groups have used this technique to reach temperatures around 1 mK, with a current lowest temperature below 0.5 mK.

cond-mat.mes-hall↗

arXiv2020

Edge State Wave Functions from Momentum-Conserving Tunneling Spectroscopy

We perform momentum-conserving tunneling spectroscopy using a GaAs cleaved-edge overgrowth quantum wire to investigate adjacent quantum Hall edge states. We use the lowest five wire modes with their distinct wave functions to probe each edge state and apply magnetic fields to modify the wave functions and their overlap. This reveals an intricate and rich tunneling conductance fan structure which is succinctly different for each of the wire modes. We self-consistently solve the Poisson-Schrödinger equations to simulate the spectroscopy, reproducing the striking fans in great detail, thus confirming the calculations. Further, the model predicts hybridization between wire states and Landau levels, which is also confirmed experimentally. This establishes momentum-conserving tunneling spectroscopy as a powerful technique to probe edge state wave functions.

cond-mat.mes-hall↗

arXiv2020

Quantum device fine-tuning using unsupervised embedding learning

Quantum devices with a large number of gate electrodes allow for precise control of device parameters. This capability is hard to fully exploit due to the complex dependence of these parameters on applied gate voltages. We experimentally demonstrate an algorithm capable of fine-tuning several device parameters at once. The algorithm acquires a measurement and assigns it a score using a variational auto-encoder. Gate voltage settings are set to optimise this score in real-time in an unsupervised fashion. We report fine-tuning times of a double quantum dot device within approximately 40 min.

cond-mat.mes-hall↗

arXiv2020

Machine learning enables completely automatic tuning of a quantum device faster than human experts

Device variability is a bottleneck for the scalability of semiconductor quantum devices. Increasing device control comes at the cost of a large parameter space that has to be explored in order to find the optimal operating conditions. We demonstrate a statistical tuning algorithm that navigates this entire parameter space, using just a few modelling assumptions, in the search for specific electron transport features. We focused on gate-defined quantum dot devices, demonstrating fully automated tuning of two different devices to double quantum dot regimes in an up to eight-dimensional gate voltage space. We considered a parameter space defined by the maximum range of each gate voltage in these devices, demonstrating expected tuning in under 70 minutes. This performance exceeded a human benchmark, although we recognise that there is room for improvement in the performance of both humans and machines. Our approach is approximately 180 times faster than a pure random search of the parameter space, and it is readily applicable to different material systems and device architectures. With an efficient navigation of the gate voltage space we are able to give a quantitative measurement of device variability, from one device to another and after a thermal cycle of a device. This is a key demonstration of the use of machine learning techniques to explore and optimise the parameter space of quantum devices and overcome the challenge of device variability.

cond-mat.mes-hall↗

arXiv2018

Efficiently measuring a quantum device using machine learning

Scalable quantum technologies will present challenges for characterizing and tuning quantum devices. This is a time-consuming activity, and as the size of quantum systems increases, this task will become intractable without the aid of automation. We present measurements on a quantum dot device performed by a machine learning algorithm. The algorithm selects the most informative measurements to perform next using information theory and a probabilistic deep-generative model, the latter capable of generating multiple full-resolution reconstructions from scattered partial measurements. We demonstrate, for two different measurement configurations, that the algorithm outperforms standard grid scan techniques, reducing the number of measurements required by up to 4 times and the measurement time by 3.7 times. Our contribution goes beyond the use of machine learning for data search and analysis, and instead presents the use of algorithms to automate measurement. This work lays the foundation for automated control of large quantum circuits.

quant-ph↗

arXiv2018

Single, double, and triple quantum dots in Ge/Si nanowires

We report highly tunable control of holes in Ge/Si core/shell nanowires (NWs). We demonstrate the ability to create single quantum dots (QDs) of various sizes, with low hole occupation numbers and clearly observable excited states. For the smallest dot size we observe indications of single-hole occupation. Moreover, we create double and triple tunnel-coupled quantum dot arrays. In the double quantum dot configuration we observe Pauli spin blockade (PSB). These results open the way to perform hole spin qubit experiments in these devices.

cond-mat.mes-hall↗

arXiv2017

On-and-off chip cooling of a Coulomb blockade thermometer down to 2.8 mK

Cooling nanoelectronic devices below 10 mK is a great challenge since thermal conductivities become very small, thus creating a pronounced sensitivity to heat leaks. Here, we overcome these difficulties by using adiabatic demagnetization of \emph{both} the electronic leads \emph{and} the large metallic islands of a Coulomb blockade thermometer. This reduces the external heat leak through the leads and also provides on-chip refrigeration, together cooling the thermometer down to 2.8$\pm$0.1 mK. We present a thermal model which gives a good qualitative account and suggests that the main limitation is heating due to pulse tube vibrations. With better decoupling, temperatures below 1 mK should be within reach, thus opening the door for microkelvin nanoelectronics.

cond-mat.mes-hall↗

arXiv2017

Evidence for Disorder Induced Delocalization in Graphite

We present electrical transport measurements in natural graphite and highly ordered pyrolytic graphite (HOPG), comparing macroscopic samples with exfoliated, nanofabricated specimens of nanometer thickness. The latter exhibit a very large c-axis resistivity $ρ_c$ -- much larger than expected from simple band theory -- and non-monotonic temperature dependence, similar to macroscopic HOPG, but in stark contrast to macroscopic natural graphite. A recent model of disorder-induced delocalization is consistent with our transport data. Furthermore, Micro-Raman spectroscopy reveals clearly reduced disorder in exfoliated samples and HOPG, as expected within the model -- therefore presenting further evidence for a novel paradigm of electronic transport in graphite.

cond-mat.mes-hall↗

arXiv2015

Tunnel-Junction Thermometry Down to Millikelvin Temperatures

We present a simple on-chip electronic thermometer with the potential to operate down to 1 mK. It is based on transport through a single normal-metal - superconductor tunnel junction with rapidly widening leads. The current through the junction is determined by the temperature of the normal electrode that is efficiently thermalized to the phonon bath, and it is virtually insensitive to the temperature of the superconductor, even when the latter is relatively far from equilibrium. We demonstrate here the operation of the device down to 7 mK and present a systematic thermal analysis.

cond-mat.mes-hall↗

arXiv2015

Intrinsic Metastabilities in the Charge Configuration of a Double Quantum Dot

We report a thermally activated metastability in a GaAs double quantum dot exhibiting real-time charge switching in diamond shaped regions of the charge stability diagram. Accidental charge traps and sensor back action are excluded as the origin of the switching. We present an extension of the canonical double dot theory based on an intrinsic, thermal electron exchange process through the reservoirs, giving excellent agreement with the experiment. The electron spin is randomized by the exchange process, thus facilitating fast, gate-controlled spin initialization. At the same time, this process sets an intrinsic upper limit to the spin relaxation time.

cond-mat.mes-hall↗

arXiv2014

Hybrid Quantum Dot-2D Electron Gas Devices for Coherent Optoelectronics

We present an inverted GaAs 2D electron gas with self-assembled InAs quantum dots in close proximity, with the goal of combining quantum transport with quantum optics experiments. We have grown and characterized several wafers -- using transport, AFM and optics -- finding narrow-linewidth optical dots and high-mobility, single subband 2D gases. Despite being buried 500 nm below the surface, the dots are clearly visible on AFM scans, allowing precise localization and paving the way towards a hybrid quantum system integrating optical dots with surface gate-defined nanostructures in the 2D gas.

cond-mat.mes-hall↗

arXiv2014

Silver-Epoxy Microwave Filters and Thermalizers for Millikelvin Experiments

We present Silver-epoxy filters combining excellent microwave attenuation with efficient wire thermalization, suitable for low temperature quantum transport experiments. Upon minimizing parasitic capacitances, the attenuation reaches >100 dB above ~150 MHz and - when capacitors are added - already above ~30 MHz. We measure the device electron temperature with a GaAs quantum dot and demonstrate excellent filter performance. Upon improving the sample holder and adding a second filtering stage, we obtain electron temperatures as low as 7.5 +/- 0.2 mK in metallic Coulomb blockade thermometers.

cond-mat.mes-hall↗