arXiv subjects

D. Neise

Publications and source records attributed to D. Neise.

At least 19 recordsLinked to original sources

arXiv2026

The Array Control and Data Acquisition software of the Cherenkov Telescope Array Observatory

The Cherenkov Telescope Array Observatory (CTAO) aims to advance knowledge of the gamma-ray sky as the largest gamma-ray observatory ever built. The CTAO will be deployed at two sites, one in the Northern Hemisphere and the other in the Southern Hemisphere, containing telescopes of three sizes to cover different energy domains. Commissioning of the prototype CTAO Large-Sized Telescope (LST-1) is being finalized at the northern site, while three additional LSTs are under construction. Additional calibration and environmental monitoring instruments, such as laser imaging detection and ranging (LIDAR) systems and weather stations, will support telescope operations. The Array Control and Data Acquisition (ACADA) system serves as the central element for on-site CTAO operations. ACADA controls, supervises, and handles the data generated by the telescopes and the auxiliary instruments. It drives the efficient planning and execution of observations while managing the multi-gigabit-per-second data streams produced by each CTAO telescope. The ACADA system contains the CTAO Science Alert Generation Pipeline - a real-time data processing and analysis pipeline, dedicated to automatically generating science alert candidates as data are acquired. These science alerts, along with external alerts received from other scientific instruments, are managed by the Transients Handler (TH) component. The TH informs ACADA's Short-Term Scheduler (STS) about relevant science alerts, enabling modification of ongoing observations on sub-minute timescales. This capability for rapid response, combined with the fast slewing of CTAO telescopes, makes the Observatory an excellent instrument for studying high-impact astronomical transients.

astro-ph.IM↗

arXiv2026

Prospects for the detection of gamma rays using Cherenkov telescopes enhanced by a ground array observatory

We study through detailed simulated data and their optimized analysis the expected performance of the Single-Mirror Small-Size imaging atmospheric Cherenkov Telescopes (SST-1M) potentially located inside a high-altitude array of Water-Cherenkov Detectors (WCDs) inspired by the current foreseen design of the Southern Wide-field Gamma-ray Observatory (SWGO). For such a hybrid setup, we show an improvement in the flux sensitivity above 10 TeV by about 60% for monocular and 30% for stereoscopic SST-1M observation, due to the improved gamma/hadron separation when additional parameters from the WCD array are used. We also discuss further benefits of the hybrid gamma observatory concept and its technical challenges.

astro-ph.IM↗

arXiv2025

The SST-1M stereoscopic system

The Single-Mirror Small-Size Telescope (SST-1M) is an Imaging Atmospheric Cherenkov Telescope designed for detecting very high-energy gamma rays. With a compact design achieved through the adoption of silicon-photomultiplier pixels and a lightweight structure, SST-1M offers a large field of view of about 9{\deg} and features a mirror system of 4 m diameter with an optical PSF (at 80% of photon inclusion) of 0.08{\deg} on axis and 0.21{\deg} at 4{\deg} off-axis, and a fully digitizing readout almost deadtime free up to few kHz. The SST-1M achieved a high-performance and cost-effective solution for implementing an array of small-sized telescopes. The stereoscopic system of two SST-1Ms is temporarily installed at the Ond\v{r}ejov Observatory in the Czech Republic. From an altitude of only about 510 m and in harsh meteorological conditions, the system is detecting galactic sources and flares of AGNs. The accurate calibration of the detector and the simulation benchmark are ongoing. The results of its performance are shown. A future final location is being considered and a future performance outlook is discussed.

astro-ph.IM↗

arXiv2025

Observation of the Crab Nebula with the Single-Mirror Small-Size Telescope stereoscopic system at low altitude

The Single-Mirror Small-Size Telescope (SST-1M) stereoscopic system is composed of two Imaging Atmospheric Cherenkov Telescopes (IACTs) designed for optimal performance for gamma-ray astronomy in the multi-TeV energy range. It features a 4-meter-diameter tessellated mirror dish and an innovative SiPM-based camera. Its optical system features a 4-m diameter spherical mirror dish based on the Davies-Cotton design, maintaining a good image quality over a large FoV while minimizing optical aberrations. In 2022, two SST-1M telescopes were installed at the Ond\v{r}ejov Observatory, Czech Republic, at an altitude of 510 meters above sea level, and have been collecting data for commissioning and astronomical observations since then. We present the first SST-1M observations of the Crab Nebula, conducted between September 2023 and March 2024 in both mono and stereoscopic modes. During this observation period, 46 hours for the SST-1M-1 and 52 hours for the SST-1M-2 were collected for which 33 hours are in stereoscopic mode. We use the Crab Nebula observation to validate the expected performance of the instrument, as evaluated by Monte Carlo simulations carefully tuned to account for instrumental and atmospheric effects. We determined that the energy threshold at the analysis level for the zenith angles below $30^\circ$ is 1 TeV for mono mode and 1.3 TeV for stereo mode. The energy and angular resolutions are approximately 20% and $0.18^\circ$ for mono mode and 10% and $0.10^\circ$ for stereo mode, respectively. We present the off-axis performance of the instrument and a detailed study of systematic uncertainties. The results of a full simulation of the telescope and its camera is compared to the data for the first time, allowing a deep understanding of the SST-1M array performance.

astro-ph.IM↗

arXiv2024

Analysis of commissioning data from SST-1M : A Prototype of Single-Mirror Small Size Telescope

SST-1M is a prototype of a single-mirror Small Size Telescope developed by a consortium of institutes from Poland, Switzerland and the Czech Republic. With a wide field of view of 9 degrees, SST-1Ms are designed to detect gamma-rays in the energy range between 1 and 300 TeV. The design of the SST-1M follows the Davies-Cotton concept, with a 9.42m2 multi-segment mirror. SST-1M is equipped with DigiCam camera, which features a fully digital readout and trigger system using 250 MHz ADC, and a compact Photo-Detector Plane (PDP) composed of 1296 pixels, each made of a hexagonal light guide coupled to silicone photomultipliers (SiPM). Two SST-1M telescopes are currently being commissioned at the Ondrejov Observatory in the Czech Republic, where they are successfully observing Cerenkov events in stereo. This contribution will present an overview of calibration strategies and performance evaluation based on data collected at the observatory.

astro-ph.IM↗

arXiv2024

The SST-1M imaging atmospheric Cherenkov telescope for gamma-ray astrophysics

The SST-1M is a Small-Sized Telescope (SST) designed to provide a cost-effective and high-performance solution for gamma-ray astrophysics, particularly for energies beyond a few TeV. The goal is to integrate this telescope into an array of similar instruments, leveraging its lightweight design, earthquake resistance, and established Davies-Cotton configuration. Additionally, its optical system is designed to function without a protective dome, allowing it to withstand the harsh atmospheric conditions typical of mountain environments above 2000 m. The SST-1M utilizes a fully digitizing camera system based on silicon photomultipliers (SiPMs). This camera is capable of digitizing all signals from the UV-optical light detectors, allowing for the implementation of various triggers and data analysis methods. We detail the process of designing, prototyping, and validating this system, ensuring that it meets the stringent requirements for gamma-ray detection and performance. An SST-1M stereo system is currently operational and collecting data at the Ond\v{r}ejov observatory in the Czech Republic, situated at 500 m. Preliminary results from this system are promising. A forthcoming paper will provide a comprehensive analysis of the performance of the telescopes in detecting gamma rays and operating under real-world conditions.

astro-ph.IM↗

arXiv2023

Mono and stereo performance of the two SST-1M telescope prototypes

The Single-Mirror Small-Sized Telescope, or SST-1M, was originally developed as a prototype of a small-sized telescope for CTA, designed to form an array for observations of gamma-ray-induced atmospheric showers for energies above 3 TeV. A pair of SST-1M telescopes is currently being commissioned at the Ondrejov Observatory in the Czech Republic, and the telescope capabilities for mono and stereo observations are being tested in better astronomical conditions. The final location for the telescopes will be decided based on these tests. In this contribution, we present a data analysis pipeline called sst1mpipe, and the performance of the telescopes when working independently and in a stereo regime.

astro-ph.IM↗

arXiv2021

Multi-wavelength study of Mrk 421 during a TeV flare

The blazar Mrk 421 shows frequent, short flares in the TeV energy regime. Due to the fast nature of such episodes, we often fail to obtain sufficient simultaneous information about flux variations in several energy bands. To overcome this lack of multi-wavelength (MWL) coverage, especially for the pre- and post-flare periods, we have set up a monitoring program with the FACT telescope (TeV energies) and the Neil Gehrels Swift Observatory (X-rays). On 2019 June 9, Mrk 421 showed a TeV outburst reaching a flux level of more than two times the flux of the Crab Nebula at TeV energies. We acquired simultaneous data in the X-rays with additional observations by XMM-Newton and INTEGRAL. For the first time, we can study a TeV blazar in outburst taking advantage of highly sensitive X-ray data from XMM-Newton and INTEGRAL combined. Our dataset is complemented by pointed radio observations by Effelsberg at GHz frequencies. We present our first results, including the {\gamma}-ray and X-ray light curves, a timing analysis of the X-ray data obtained with XMM-Newton , as well as the radio spectra before, during and after the flare.

astro-ph.HE↗

arXiv2020

Large scale characterization and calibration strategy of a SiPM-based camera for gamma-ray astronomy

The SST-1M is a 4-m diameter mirror Davies-Cotton gamma-ray telescope. It has been designed to cover the energy range above 500 GeV and to be part of an array of telescopes separated by 150-200 m. Its innovative camera is featuring large area hexagonal silicon photo-multipliers as photon detectors and a fully digital trigger and readout system. Here, the strategy and the methods for its calibration are presented, together with the obtained results. In particular, the off and on-site calibration strategies are demonstrated on the first camera prototype. The performances of the camera in terms of charge and time resolution are described.

astro-ph.IM↗

arXiv2017

Mirror Position Determination for the Alignment of Cherenkov Telescopes

Imaging Atmospheric Cherenkov Telescopes (IACTs) need imaging optics with large apertures to map the faint Cherenkov light emitted in extensive air showers onto their image sensors. Segmented reflectors fulfill these needs using mass produced and light weight mirror facets. However, as the overall image is the sum of the individual mirror facet images, alignment is important. Here we present a method to determine the mirror facet positions on a segmented reflector in a very direct way. Our method reconstructs the mirror facet positions from photographs and a laser distance meter measurement which goes from the center of the image sensor plane to the center of each mirror facet. We use our method to both align the mirror facet positions and to feed the measured positions into our IACT simulation. We demonstrate our implementation on the 4 m First Geiger-mode Avalanche Cherenkov Telescope (FACT).

astro-ph.IM↗

arXiv2016

Bokeh Mirror Alignment for Cherenkov Telescopes

Imaging Atmospheric Cherenkov Telescopes (IACTs) need imaging optics with large apertures and high image intensities to map the faint Cherenkov light emitted from cosmic ray air showers onto their image sensors. Segmented reflectors fulfill these needs, and composed from mass production mirror facets they are inexpensive and lightweight. However, as the overall image is a superposition of the individual facet images, alignment remains a challenge. Here we present a simple, yet extendable method, to align a segmented reflector using its Bokeh. Bokeh alignment does not need a star or good weather nights but can be done even during daytime. Bokeh alignment optimizes the facet orientations by comparing the segmented reflectors Bokeh to a predefined template. The optimal Bokeh template is highly constricted by the reflector's aperture and is easy accessible. The Bokeh is observed using the out of focus image of a near by point like light source in a distance of about 10 focal lengths. We introduce Bokeh alignment on segmented reflectors and demonstrate it on the First Geiger-mode Avalanche Cherenkov Telescope (FACT) on La Palma, Spain.

astro-ph.IM↗

arXiv2016

Normalized and Asynchronous Mirror Alignment for Cherenkov Telescopes

Imaging Atmospheric Cherenkov Telescopes (IACTs) need imaging optics with large apertures and high image intensities to map the faint Cherenkov light emitted from cosmic ray air showers onto their image sensors. Segmented reflectors fulfill these needs, and as they are composed from mass production mirror facets they are inexpensive and lightweight. However, as the overall image is a superposition of the individual facet images, alignment is a challenge. Here we present a computer vision based star tracking alignment method, which also works for limited or changing star light visibility. Our method normalizes the mirror facet reflection intensities to become independent of the reference star's intensity or the cloud coverage. Using two CCD cameras, our method records the mirror facet orientations asynchronously of the telescope drive system, and thus makes the method easy to integrate into existing telescopes. It can be combined with remote facet actuation, but does not require one to work. Furthermore, it can reconstruct all individual mirror facet point spread functions without moving any mirror. We present alignment results on the 4 meter First Geiger-mode Avalanche Cherenkov Telescope (FACT).

astro-ph.IM↗

arXiv2015

Data compression for the First G-APD Cherenkov Telescope

The First Geiger-mode Avalanche photodiode (G-APD) Cherenkov Telescope (FACT) has been operating on the Canary island of La Palma since October 2011. Operations were automated so that the system can be operated remotely. Manual interaction is required only when the observation schedule is modified due to weather conditions or in case of unexpected events such as a mechanical failure. Automatic operations enabled high data taking efficiency, which resulted in up to two terabytes of FITS files being recorded nightly and transferred from La Palma to the FACT archive at ISDC in Switzerland. Since long term storage of hundreds of terabytes of observations data is costly, data compression is mandatory. This paper discusses the design choices that were made to increase the compression ratio and speed of writing of the data with respect to existing compression algorithms. Following a more detailed motivation, the FACT compression algorithm along with the associated I/O layer is discussed. Eventually, the performances of the algorithm is compared to other approaches.

astro-ph.IM↗

arXiv2015

FACT - Monitoring Blazars at Very High Energies

The First G-APD Cherenkov Telescope (FACT) was built on the Canary Island of La Palma in October 2011 as a proof of principle for silicon based photosensors in Cherenkov Astronomy. The scientific goal of the project is to study the variability of active galatic nuclei (AGN) at TeV energies. Observing a small sample of TeV blazars whenever possible, an unbiased data sample is collected. This allows to study the variability of the selected objects on timescales from hours to years. Results from the first three years of monitoring will be presented. To provide quick flare alerts to the community and trigger multi-wavelength observations, a quick look analysis has been installed on-site providing results publicly online within the same night. In summer 2014, several flare alerts were issued. Results of the quick look analysis are summarized.

astro-ph.IM↗

arXiv2014

FACT -- Operation of the First G-APD Cherenkov Telescope

Since more than two years, the First G-APD Cherenkov Telescope (FACT) is operating successfully at the Canary Island of La Palma. Apart from its purpose to serve as a monitoring facility for the brightest TeV blazars, it was built as a major step to establish solid state photon counters as detectors in Cherenkov astronomy. The camera of the First G-APD Cherenkov Telesope comprises 1440 Geiger-mode avalanche photo diodes (G-APD aka. MPPC or SiPM) for photon detection. Since properties as the gain of G-APDs depend on temperature and the applied voltage, a real-time feedback system has been developed and implemented. To correct for the change introduced by temperature, several sensors have been placed close to the photon detectors. Their read out is used to calculate a corresponding voltage offset. In addition to temperature changes, changing current introduces a voltage drop in the supporting resistor network. To correct changes in the voltage drop introduced by varying photon flux from the night-sky background, the current is measured and the voltage drop calculated. To check the stability of the G-APD properties, dark count spectra with high statistics have been taken under different environmental conditions and been evaluated. The maximum data rate delivered by the camera is about 240 MB/s. The recorded data, which can exceed 1 TB in a moonless night, is compressed in real-time with a proprietary loss-less algorithm. The performance is better than gzip by almost a factor of two in compression ratio and speed. In total, two to three CPU cores are needed for data taking. In parallel, a quick-look analysis of the recently recorded data is executed on a second machine. Its result is publicly available within a few minutes after the data were taken. [...]

astro-ph.IM↗

arXiv2014

Calibration and performance of the photon sensor response of FACT -- The First G-APD Cherenkov telescope

The First G-APD Cherenkov Telescope (FACT) is the first in-operation test of the performance of silicon photo detectors in Cherenkov Astronomy. For more than two years it is operated on La Palma, Canary Islands (Spain), for the purpose of long-term monitoring of astrophysical sources. For this, the performance of the photo detectors is crucial and therefore has been studied in great detail. Special care has been taken for their temperature and voltage dependence implementing a correction method to keep their properties stable. Several measurements have been carried out to monitor the performance. The measurements and their results are shown, demonstrating the stability of the gain below the percent level. The resulting stability of the whole system is discussed, nicely demonstrating that silicon photo detectors are perfectly suited for the usage in Cherenkov telescopes, especially for long-term monitoring purpose.

astro-ph.IM↗

arXiv2014

FACT -- The G-APD revolution in Cherenkov astronomy

Since two years, the FACT telescope is operating on the Canary Island of La Palma. Apart from its purpose to serve as a monitoring facility for the brightest TeV blazars, it was built as a major step to establish solid state photon counters as detectors in Cherenkov astronomy. The camera of the First G-APD Cherenkov Telesope comprises 1440 Geiger-mode avalanche photo diodes (G-APD), equipped with solid light guides to increase the effective light collection area of each sensor. Since no sense-line is available, a special challenge is to keep the applied voltage stable although the current drawn by the G-APD depends on the flux of night-sky background photons significantly varying with ambient light conditions. Methods have been developed to keep the temperature and voltage dependent response of the G-APDs stable during operation. As a cross-check, dark count spectra with high statistics have been taken under different environmental conditions. In this presentation, the project, the developed methods and the experience from two years of operation of the first G-APD based camera in Cherenkov astronomy under changing environmental conditions will be presented.

astro-ph.IM↗

arXiv2013

FACT - Long-term Monitoring of Bright TeV-Blazars

Since October 2011, the First G-APD Cherenkov Telescope (FACT) is operated successfully on the Canary Island of La Palma. Apart from the proof of principle for the use of G-APDs in Cherenkov telescopes, the major goal of the project is the dedicated long-term monitoring of a small sample of bright TeV blazars. The unique properties of G-APDs permit stable observations also during strong moon light. Thus a superior sampling density is provided on time scales at which the blazar variability amplitudes are expected to be largest, as exemplified by the spectacular variations of Mrk 501 observed in June 2012. While still in commissioning, FACT monitored bright blazars like Mrk 421 and Mrk 501 during the past 1.5 years so far. Preliminary results including the Mrk 501 flare from June 2012 will be presented.

astro-ph.HE↗