arXiv subjects

D. O. Moskalev

Publications and source records attributed to D. O. Moskalev.

5 recordsLinked to original sources

arXiv2024

Aluminum Josephson junction microstructure and electrical properties modification with thermal annealing

Superconducting qubits based on Al/AlOx/Al Josephson junction are one of the most promising candidates for the physical implementation of universal quantum computers. Due to scalability and compatibility with the state-of-the-art nanoelectronic processes one can fabricate hundreds of qubits on a single silicon chip. However, decoherence in these systems caused by two-level-systems in amorphous dielectrics, including a tunneling barrier AlOx, is one of the major problems. We report on a Josephson junction thermal annealing process development to crystallize an amorphous barrier oxide (AlOx). The dependences of the thermal annealing parameters on the room temperature resistance are obtained. The developed method allows not only to increase the Josephson junction resistance by 175%, but also to decrease by 60% with precisions of 10% in Rn. Finally, theoretical assumptions about the structure modification in tunnel barrier are proposed. The suggested thermal annealing approach can be used to form a stable and reproducible tunneling barriers and scalable frequency trimming for a widely used fixed-frequency transmon qubits.

quant-ph↗

arXiv2023

High-Q trenched aluminum coplanar resonators with an ultrasonic edge microcutting for superconducting quantum devices

Dielectric losses are one of the key factors limiting the coherence of superconducting qubits. The impact of materials and fabrication steps on dielectric losses can be evaluated using coplanar waveguide (CPW) microwave resonators. Here, we report on superconducting CPW microwave resonators with internal quality factors systematically exceeding 5x106 at high powers and 2x106 (with the best value of 4.4x106) at low power. Such performance is demonstrated for 100-nm-thick aluminum resonators with 7-10.5 um center trace on high-resistivity silicon substrates commonly used in quantum Josephson junction circuits. We investigate internal quality factors of the resonators with both dry and wet aluminum etching, as well as deep and isotropic reactive ion etching of silicon substrate. Josephson junction compatible CPW resonators fabrication process with both airbridges and silicon substrate etching is proposed. Finally, we demonstrate the effect of airbridges positions and extra process steps on the overall dielectric losses. The best quality fa ctors are obtained for the wet etched aluminum resonators and isotropically removed substrate with the proposed ultrasonic metal edge microcutting.

quant-ph↗

arXiv2022

Improving Josephson junction reproducibility for superconducting quantum circuits: shadow evaporation and oxidation

The most commonly used physical realization of superconducting qubits for quantum circuits is a transmon. There are a number of superconducting quantum circuits applications, where Josephson junction critical current reproducibility over a chip is crucial. Here, we report on a robust chip scale $Al/AlO_x/Al$ junctions fabrication method due to comprehensive study of shadow evaporation and oxidation steps. We experimentally demonstrate the evidence of optimal Josephson junction electrodes thickness, deposition rate and deposition angle, which ensure minimal electrode surface and line edge roughness. The influence of oxidation method, pressure and time on critical current reproducibility is determined. With the proposed method we demonstrate $Al/AlO_x/Al$ junction fabrication with the critical current variation ($σ/I_c$) less than 3.9% (from $150\times200$ to $150\times600$ $nm^2$ area) and 7.7% (for $100\times100$ $nm^2$ area) over $20\times20$ $mm^2$ chip. Finally, we fabricate separately three $5\times10$ $mm^2$ chips with 18 transmon qubits (near 4.3 GHz frequency) showing less than 1.9% frequency variation between qubit on different chips. The proposed approach and optimization criteria can be utilized for a robust wafer-scale superconducting qubit circuits fabrication.

quant-ph↗

arXiv2022

Improving Josephson junction reproducibility for superconducting quantum circuits: junction area fluctuation

Josephson superconducting qubits and parametric amplifiers are prominent examples of superconducting quantum circuits that have shown rapid progress in recent years. With the growing complexity of such devices, the requirements for reproducibility of their electrical properties across a chip have become stricter. Thus, the critical current $I_c$ variation of the Josephson junction, as the most important electrical parameter, needs to be minimized. Critical current, in turn, is related to normal-state resistance the Ambegaokar-Baratoff formula, which can be measured at room temperature. Here, we focus on the dominant source of Josephson junction critical current non-uniformity junction area variation. We optimized Josephson junctions fabrication process and demonstrate resistance variation of $9.8-4.4\%$ and $4.8-2.3\%$ across $22{\times}22$ $mm^2$ and $5{\times}10$ $mm^2$ chip areas, respectively. For a wide range of junction areas from $0.008$ $μm^2$ to $0.12$ $μm^2$ we ensure a small linewidth standard deviation of $4$ $nm$ measured over 4500 junctions with linear dimensions from $80$ to $680$ $nm$. The developed process was tested on superconducting highly coherent transmon qubits $(T_1 > 100\:μs)$ and a nonlinear asymmetric inductive element parametric amplifier.

quant-ph↗

arXiv2020

Light-dressing of a diatomic superconducting artificial molecule

In this work, we irradiate a superconducting artificial molecule composed of two coupled tunable transmons with microwave light while monitoring its state via joint dispersive readout. Performing high-power spectroscopy, we observe and identify a variety of single- and multiphoton transitions. We also find that at certain fluxes, the measured spectrum of the system deviates significantly from the solution of the stationary Schrödinger equation with no driving. We reproduce these unusual spectral features by solving numerically the full master equation for a steady-state and attribute them to an Autler-Townes-like effect in which a single tone is simultaneously dressing the system and probing the transitions between new eigenstates. We show that it is possible to find analytically the exact frequencies at which the satellite spectral lines appear by solving self-consistent equations in the rotating frame. Our approach agrees well with both the experiment and the numerical simulation.

physics.atom-ph↗