arXiv subjects

D. P. Rai

Publications and source records attributed to D. P. Rai.

At least 19 recordsLinked to original sources

arXiv2026

Performance Analysis of Double Perovskite-Based Solar Cells Using SCAPS-1D Simulation: A brief review

Lead-free double perovskites are among the rapidly developing next-generation solar cell technologies, providing the required low toxicity, stability, as well as high optoelectronic potential. So far, experimentally prepared lead-free perovskite solar cell devices are reported to have low power conversion efficiency (PCE) for practical application as compared to the lead-based perovskites. In recent years, numerical simulations have emerged as a cost-effective approach that plays a crucial role in expediting scientific research, can bridge the gap between experiment and theory, and provide predictive information regarding the preparation of solar cells and their PCEs without undergoing real-time experiments. The tools, such as 1D numerical simulation software SCAPS-1D, are now needed to test newer architectures and determine what exactly is holding them back. So far in the field of solar cell research, SCAPS-1D has been extensively used and looks like a powerful software due to its user-friendliness and simulation of results in a few seconds. The speed and ease of simulation make SCAPS-1D a very popular tool; as a result, it enables rapid optimization of a large number of photovoltaic devices and their performances without undergoing any experimental work, which can save time and money. However, one serious drawback is that the SCAPS-1D simulator works only for 1D configurations. It is ineffective in incorporating atomistic interactions and 3D effects. Hence, the efficacy of the SCAPS-1D simulator solely relies on the accuracy of the input parameters that the user provides, failing which may give wrong results and large deviations from accuracy.

cond-mat.mtrl-sci↗

arXiv2026

A DFT and Machine Learning-Assisted Study on the Lattice Thermal Conductivity of LiCdSb for Thermoelectric Applications

By using first-principles density functional theory (DFT) and the Boltzmann transport equation, we have calculated the corresponding electronic and thermoelectric properties of LiCdSb. For calculating electron transport properties, accurate band-structure estimation is crucial. Hence, for the precise band gap calculation, we have implemented a hybrid functional HSE06, which is widely known for its high accuracy. To evaluate the thermoelectric performance of a material, the calculation of lattice thermal conductivity (Kl) is a key parameter. However, from a theoretical perspective, the calculation of lattice thermal conductivity is very complex and demands huge computational resources. Therefore, in this work, we have opted for an alternative method of machine-learning interatomic potentials (MLIPs) for the calculation of Kl. Our result of Kl=0.24 Wm^-1K^-1 at room temperature is in qualitative agreement with the available theoretical and experimental data. The figure of merit (ZT) with Kl estimated from Slack+TDEC ZT is 0.18 at 300 K, and machine learning (ML) models ZT is 0.17 at 300K, combining with HSE06-based electronic transport properties agreed well with the available experimentally reported value of ZT is 0.10 at 300K. However, we report the ZT value well above the benchmark value of 1 beyond 600K. The ZT value exceeding 1 at higher temperatures makes LiCdSb a promising material for high-temperature energy conversion.

cond-mat.mtrl-sci↗

arXiv2025

Interfacial effect on the optoelectronic and piezoelectric properties of Ge-Sn terminated Halide Perovskite heterostructure from first-principles study

Since the very early stages of research on sustainable technologies, green energy conversion has always been a prime focus. With the discoveries of countless functional materials in recent years, significant progress has been made to meet the global energy demand for sustainable development. Among them, halide perovskites have emerged as one of the most promising and reliable materials. In this work, we have investigated the lead-free halide perovskites, vis CsGeCl3 and RbSnBr3, within a framework of density functional theory (DFT) to explore their potential applicability in harvesting clean and renewable energy. This study gives a comprehensive analysis of the bulk, surface (001), and Ge-Sn-terminated interfaces within GGA and mGGA functionals. Interestingly, the inherent asymmetric arrangements of the systems exhibit remarkable optoelectronic and piezoelectric properties. The piezoelectric performance of each surface cut has been validated through the electromechanical coupling calculation.

cond-mat.mtrl-sci↗

arXiv2025

Cu2XSiS4 (X = Ge, Sn, and Pb) materials for solar-cell applications: A DFT+SCAPS-1D simulation

By means of the first-principles density functional theory (DFT), I2-II-IV-VI4 type Cu-based quaternary chalcogenides Cu 2 XSiS 4 (X = Ge, Sn, and Pb) have been thoroughly investigated. We report the study of Ge and Sn substitution in the divalent cation site for their potential applications in photovoltaics for the first time. The structural, electronic, optical, and mechanical properties have been calculated. The structural and thermal stability is verified by calculating the elastic constants, formation energy and total potential energy at 300 K from the ab-initio molecular dynamics (MD) simulation. The compounds under our investigation exhibited an indirect band gap in the range of 1.0--1.56 eV, suitable for energy harvesting by trapping the sunlight. The presence of absorption peaks within the visible region complements their potential in photovoltaic applications. For further validation, we have designed a model of a heterostructure (FTO/TiO2/Cu2XSiS4/CuO/Au) solar cell, and a numerical simulation has been performed by solving the Poisson equation and continuity equations to obtain the I-V characteristic by using SCAPS-1D. All the inputs needed for solar- cell simulation in SCAPS-1D have been taken from the DFT results. The corresponding Power Conversion Efficiency (PCE) is denoted by η% and their respective values for X=Ge, Sn and Pb are 23.46%, 23.29% and 22.60%, at room temperature. The Ge-based system exhibits the highest η%, owing to its band gap value in the visible range of the solar spectrum. Thus, we report that Ge-based compounds may act as a promising absorber layer in heterostructure solar-cell applications.

cond-mat.mtrl-sci↗

arXiv2025

Electronic properties of Kagome metal YbV$_3$Sb$_4$: A First-Principles Study

We have investigated the vanadium-based Kagome metal YbV$_3$Sb$_4$ using density functional theory (DFT) combined with the Wannier function analysis. We explore the electronic properties, de Haas-van Alphen (dHvA) effect and Fermi surface. The inclusion of spin-orbit coupling SOC induces the splitting of Yb-4f states, while its impact on the V-3d states is moderate. Furthermore, we have incorporated SOC+U, where U being the Hubbard parameter, which drastically changes the Yb-4f states creating additional splitting leading to three distinct peaks in the density of states (DOS). The V-3d atoms with the Kagome lattice contribute maximum to the transport properties, exhibits flat bands near the EF while being protected under SOC and U+SOC. Herein, we report the vulnerability of the Yb-4f states under SOC and U+SOC. Furthurmore, The Fermi surface is found to comprise of quasi-2D cylindrical sheets centered at the Gamma-point, along with smaller pockets near the Brillouin zone boundaries, which under combined U+SOC, a small spherical pocket emerges and the cylindrical sheet exhibits slight deformations. The dHvA frequencies reach as high as 70 kilotesla, which increase with tilt angle, exhibiting a nearly parabolic trend as expected for cylindrical orbits, while a low-frequency branch remains below 1 kT. Only the U+SOC case shows noticeable modification in both the Fermi surface and the dHvA oscillation. Crucially, the $Z_2$ invariant calculation identifies YbV$_3$Sb$_4$ as a strong topological metal ($r_0 = 1$). These findings not only advance our understanding of the underlying quantum phenomena in rare-earth Kagome systems, but also establish YbV$_3$Sb$_4$ as a compelling and promising platform for exploring intertwined topology and electron correlations in kagome lattices, thereby offering valuable insights for engineering quantum phases in layered materials.

cond-mat.str-el↗

arXiv2025

Effect of applied pressure on the non-relativistic spin-splitting (NRSS) of FeSb2 altermagnet: A first-principles study

We have investigated the pressure-dependent electronic structure, phonon stability, and anomalous Hall response of the recently discovered altermagnet FeSb2 from density functional theory (DFT) and Wannier function analysis. From density functional perturbation theory (DFPT) calculations, we have found that FeSb2 remains dynamically stable up to 10 GPa, evidenced by positive phonon frequencies. Our spin-polarised band structure shows that the node of band crossing between spin-up and spin-down bands around the Fermi energy exactly lies at the Gamma and A-symmetry points. The Fermi crossing is mostly exhibited by band-24, band-25 and band-26. The non-relativistic spin-splitting (NRSS) along M'-Gamma-M and A-Z-A' symmetry is attributed to the broken time-reversal (PT ) symmetry. There are significant changes in the band profile under applied pressure, as one can see the shifting of the node of band-24 and band-26 towards the lower energy side. The NRSS exhibited by band-24 along M'-Gamma-M symmetry is notably small. Although the strength of NRSS of band-26 along A-Z-A' symmetry is significant but reduces under applied pressure. The anomalous Hall conductivity (AHC) values are prominent in -1 to 1 eV range. A sharp peaked and positive AHC values at ambient pressure, becomes spectrally broadened and negative at 10 GPa due to pressure-induced band crossings and redistribution of Berry curvature near the Fermi level. We have observed that the values of spin hall conductivity (SHC) are around 2-2.5 times lower as compared to AHC and prominent in between -1.0 eV to 1.0 eV. Our results establish FeSb2 as a tunable altermagnetic candidate where pressure can modulate both topological transport and dynamic stability, offering opportunities for strain-engineered Hall responses in compensated magnetic systems.

cond-mat.str-el↗

arXiv2025

A comprehensive first principles investigation of A$_2$BH$_6$ type (A= Li,Na, and K; B= Al, and Si) double perovskite hydrides for high capacity hydrogen storage

Recent breakthroughs in vacancy-ordered double perovskite hydride materials have underscored their significant potential for integration into next-generation high-capacity hydrogen energy storage systems. We perform extensive first principles calculations leveraging both the GGA and hybrid-HSE06 functionals to systematically explore the intrinsic properties of A$_2$BH$_6$ complex hydrides. Thermodynamic stability for each hydride is demonstrated and confirmed by negative formation energies, determined by both the GGA and HSE06 formalisms. Additionally, mechanical stability is validated through compliance with Born's stability criteria. Electronic properties analysis reveals a semiconducting behavior in Si based hydrides (A2SiH6 ), whereas Al based (A$_2$AlH$_6$) display metallic nature, regardless of the A site atoms and functionals adopted. For the semiconducting hydrides, we have observed higher optical absorption peak greater than 106 (1/cm) in the UV regime indicating potential application in UV-optoelectronic devices. Furthermore, all studied compounds adhere to Debye's low-temperature specific heat behavior and converge to the classical Dulong-Petit limit at elevated temperatures, in accordance with fundamental thermodynamic principles. For hydrogen storage applications, both Al- and Si-based hydrides. meet key benchmarks set by the U.S. Department of Energy (DOE), achieving gravimetric hydrogen capacities (C$_{wt}$) exceeding 5.5 percent when A = Li or Na, and exhibiting volumetric hydrogen densities greater than 40 g.H2/L. Among all studied hydrides, Li$_2$AlH$_6$ and Li$_2$SiH$_6$ emerge as the two most promising candidates due to their outstanding Cwt greater than 12.0 percent , elevated density greater than 140 g.H$_2$/L, and favorable hydrogen desorption temperature ranges TD = 450 to 650 K.

cond-mat.mtrl-sci↗

arXiv2025

Group-I lead oxide X$_2$PbO$_3$ (X=Li, Na, K, Rb, and Cs) glass-like materials for energy applications: A hybrid-DFT study

Pb-based compounds have garnered considerable theoretical and experimental attention due to their promising potential in energy-related applications. In this study, we explore the glass-like alkali metal lead oxides X$_2$PbO$_3$ (X=Li, Na, K, Rb, Cs) and assess their suitability for piezoelectric and thermoelectric applications. First-principles calculations were performed using hybrid density functional theory (DFT), incorporating B3LYP, HSE06, and PBE0 functionals. Among these, PBE0 is identified as the most accurate, yielding lattice parameters in close agreement with experimental data. Structural stability was confirmed through evaluation of thermal, mechanical, and formation energies. For the non-centrosymmetric orthorhombic phase Cmc2$_1$-X$_2$PbO$_3$ (X=K, Rb, Cs), piezoelectric constants were computed via both the numerical Berry phase (BP) method and the analytical Coupled Perturbed Hartree-Fock/Kohn-Sham (CPHF/KS) formalism. Notably, Cs$_2$PbO$_3$ exhibited a piezoelectric coefficient of e$_{33}$ = 0.60 C m$^{-2}$ (CPHF/KS), while K$_2$PbO$_3$ showed e$_{32}$ = -0.51 C m$^{-2}$ (BP). Thermoelectric properties were investigated using the semiclassical Boltzmann transport theory within the rigid band approximation. The calculated thermoelectric performance reveals promising figures of merit (ZT), ranging from 0.3 to 0.63, suggesting these materials are applicable as future thermoelectric materials.

cond-mat.mtrl-sci↗

arXiv2025

Half-metallicity and anomalous Slater-Pauling behaviour in half-Heusler CrMnSb

This study provides a first-principles insight into half-Heusler CrMnSb to understand its deviation from the conventional Slater-Pauling semiconducting behavior. CrMnSb, having a valence electron count of 18, has been proposed to exhibit compensated ferrimagnetic character instead of the expected nonmagnetic semiconducting ground state. As half-Heusler systems with a valence electron count of 18 are not known to exhibit magnetic ordering, we have investigated the electronic and magnetic properties of CrMnSb using a combination of density functional theory and Green's function-based multiple-scattering theory. We show that, despite satisfying the 18 valence electron Slater-Pauling rule, CrMnSb does not exhibit ground-state nonmagnetic semiconducting behavior. Instead, it reveals a half-metallic, fully compensated ferrimagnetic ground state. This anomaly originates from the presence of localized sublattice moments, resulting from antiparallel alignment between Cr and Mn sublattices, which enforces half-metallic ferrimagnetism despite its ideal 18 valence electron count.

cond-mat.mtrl-sci↗

arXiv2025

The study of electronic, structural, mechanical, and piezoelectric properties of bulk NbOX2 (X = Cl, Br, and I) using density functional theory

In this work, we have performed a comprehensive study of dielectric materials NbOX2 (X=Cl, Br, and I) within the framework of density functional theory, incorporating both conventional and hybrid functionals.Our studies focus on the structure, electronic, elastic, and piezoelectric properties. Piezoelectricity is an innovative avenue to extract energy by manipulating the material's structures via mechanical stress. The use of non-lead-based material for piezoelectricity added an advantage of a greener approach. Among the investigated materials, bulk NbOI2 exhibits the highest piezoelectric response of 6.32 C/m$^2$, which is around 31% higher than NbOCl2, NbOBr2 and even lead zirconate titanate.

cond-mat.mtrl-sci↗

arXiv2025

2D MXene-Based Photocatalysts for Efficient Water Splitting and Hydrogen Evolution: A brief review

Photocatalytic water splitting offers a viable and sustainable method for hydrogen production. MXenes, a class of 2D transition-metal carbides/nitrides, have emerged as potential photocatalysts and co-catalysts due to their tunable electronic properties, high conductivity, and surface functionality. This review explores recent advances in MXene-based photocatalysts for hydrogen production, discussing their synthesis, electronic structures, and photocatalytic mechanisms. The key challenges, including stability issues, charge recombination, and bandgap optimisation, are critically analysed. Finally, future research directions are outlined to improve MXene-based systems for large-scale hydrogen production.

cond-mat.mtrl-sci↗

arXiv2025

A first-principles investigation of altermagnetism in CrSb2 under applied pressure

In this study, we employed first-principles density functional theory (DFT) calculations within the GGA+U framework to explore the electronic and magnetic properties of CrSb2 under varying hydrostatic pressures. CrSb2 exhibits non-relativistic spin splitting (NRSS) of around 0.5 eV around the Fermi level and the d-wave symmetric Fermi surface. Our magnetic susceptibility measurements further confirm the collinear antiferromagnetic (AFM) ground state in CrSb2 , a prerequisite for altermagnetism. The presence of collinear AFM and spin-band splitting without the application of spin-orbit coupling (SOC) supports CrSb2 as a potential contender for altermagnet. With increasing pressure, we have observed an intricate evolution of spin splitting in the valence and conduction bands, governed by changes in orbital contributions. The observation of the structural phase transition above 10 GPa is in qualitative agreement with the previous experimental findings. Our results not only support the classification of CrSb2 as an altermagnetic candidate but also provide critical insight into the role of pressure in tuning its spin-dependent electronic structure.

cond-mat.mtrl-sci↗

arXiv2024

Recent progress on the solid-state materials for photocatalysis

Hydrogen is considered an alternative source of energy to fossil fuels for the fulfilment of current energy demands. Photocatalysis initiates the hydrogen evolution reaction which is believed to be the greenest approach to produce hydrogen through clean, safe, and environmentally friendly methods. In this Review, we focus mainly on the comprehensive analysis of the 2D and 3D bulk materials on the basis of their superior photocatalytic activities. However, several literatures have reported the superiority of 2D material over the bulk counterpart in terms of photocatalytic performance owing to their ultrathin layered structures, offer a higher surface-to-volume ratio, flexibility, large active sites for incoming H2O molecules, etc. We have thoroughly analysed the drawbacks of various hydrogen production methods focusing on the photocatalysis mechanism and the processes of evolution of hydrogen. In addition to this, a short overview of the various solid-state materials for photocatalysis that have been developed so far and their mechanisms are discussed. Lastly, we have discussed the recent developments in 2D materials and their composites as promising photocatalysts.

cond-mat.mtrl-sci↗

arXiv2024

Newly discovered magnetic phase: A brief review on Altermagnets

Recently, a new magnetic phase, termed altermagnetism, has caught the attention of the magnetism and spintronics community. This newly discovered magnetic phenomenon differs from traditional ferromagnetism and antiferromagnetic. It generally lacks net magnetization and is characterized by unusual non-relativistic spin-splitting and broken time-reversal symmetry. This leads to novel transport properties such as the anomalous Hall effect, the crystal Nernst effect, and spin-dependent phenomena that cannot be fully explained by traditional magnetic theories. Spin-dependent phenomena such as spin currents, spin-splitter torques, and high-frequency dynamics emerge as key characteristics in altermagnets. This paper reviews the main aspects pertaining to altermagnets by providing an overview of theoretical investigations and experimental realizations. We discuss the most recent developments in altermagnetism, its comparison to other magnetic orders, and future prospects for exploiting its unique properties in next-generation devices.

cond-mat.str-el↗

arXiv2024

A comprehensive study of electronic and piezoelectric properties of Li-based Tin-halide perovskites from GGA and Meta-GGA

Wide bandgap semiconductors (WBGs) are predicted to be the potential materials for energy generation and storing. In this work, we used density functional theory (DFT) that incorporates generalized gradient approximation (GGA) and meta-generalized gradient approximation (mGGA) methods to explore the various properties of the LiSnCl3 and LiSnBr3 perovskites. The structural stabilities, charge transfer, electronic, optical, mechanical, and piezoelectric properties are studied. Herein, we report that these rarely studied materials are eco-friendly and look promising for optoelectronics and piezoelectric applications.

cond-mat.mtrl-sci↗

arXiv2024

Modulation of electronic and piezoelectric properties of lead-free halide perovskites LiSnX$_3$ (X = Cl, Br, and I) under applied pressure

Pb-based perovskites are considered to be the most efficient materials for energy harvest. However, real-time application is limited because of their toxicity. As a result, lead-free perovskites that offer similar advantages are potential alternatives. Here, we have chosen LiSnX$_3$ (X = Cl, Br, and I) for further calculation and explore its possibilities for harvesting clean and green energy. Our objective is to examine strategies for optimizing the parameters that control the energy-harvesting capabilities, particularly the interplay between structural variations and electrical properties. The density functional theory (DFT) has been employed for the theoretical simulation. Within the DFT framework, we have studied the effect of applied pressure (0 to 20 GPa) and elemental substitution on their physical properties. We hereby report the variation of lattice parameters, elastic constants, band gaps, and piezoelectric constants. MD simulation with time steps of up to 5 ps was performed to verify structural stability at room temperature. We report the semi-conducting characteristic of LiSnX$_3$ and the high piezoelectric response up to 20.7 Cm2. The presence of high piezoelectric coefficients suggests that manipulation of the structure of LiSnX$_3$ may provide an alternative way to harvest energy through electromechanical processes.

cond-mat.mtrl-sci↗

arXiv2024

First-principles study of the electronic structure, Z2 invariant and quantum oscillation in the kagome material CsV3Sb5

This work presents a detailed study of the electronic structure, phonon dispersion, Z2 invariant calculation, and Fermi surface of the newly discovered kagome superconductor CsV3Sb5, using density functional theory (DFT). The phonon dispersion in the pristine state reveals two negative modes at the M and L points of the Brillouin zone, indicating lattice instability. CsV3Sb5 transitions into a structurally stable 2x2x1 charge density wave (CDW) phase, confirmed by positive phonon modes. The electronic band structure shows several Dirac points near the Fermi level, with a narrow gap opening due to spin-orbit coupling (SOC), though the effect of SOC on other bands is minimal. In the pristine phase, this material exhibits a quasi-2D cylindrical Fermi surface, which undergoes reconstruction in the CDW phase. We calculated quantum oscillation frequencies using Onsager's relation, finding good agreement with experimental results in the CDW phase. To explore the topological properties of CsV3Sb5, we computed the Z2 invariant in both pristine and CDW phases, resulting in a value of (u0; u1u2u3) = (1; 000), suggesting the strong topological nature of this material. Our detailed analysis of phonon dispersion, electronic bands, Fermi surface mapping, and Z2 invariant provides insights into the topological properties, CDW order, and unconventional superconductivity in AV3Sb5 (A = K, Rb, and Cs).

cond-mat.str-el↗

arXiv2021

Electronic and mechanical properties of Nitrogen doped (6,1) single walled carbon nanotube (SWCNT)from first-principles DFT and Molecular Dynamics approach

In this paper, we have analysed the electronic and mechanical properties of Nitrogen(N) doped (6,1) SWCNTs based on first-principles and Molecular dynamic (MD) simulation. A schematic N-doping on SWCNT was performed along zigzag(zz) and armchair(ac) direction. Armchair doping is considered parallel to the tube axis while the zigzag is along the cross-section perpendicular to the tube axis. In doping pattern (both zz and ac) we have observed the variation in electronic properties for even number of N-doping and odd number of N-doping. To study the mechanical properties we have adopted ab-initio MD-simulations. We report the dependence of the tensile response of the tube on the dopant concentration and doping pattern. The single N-doped system shows enhanced tensile stress by 55% as compared to the pristine SWCNT. While the variation of young's modulus for all N-doped systems are almost invariant.

cond-mat.mtrl-sci↗