arXiv subjects

D. Pugliese

Publications and source records attributed to D. Pugliese.

At least 19 recordsLinked to original sources

arXiv2025

On the red--shift emission from the black hole horizons replicas

We examine the red-shift emission from special orbits (horizons replicas) where photons have the same angular velocity, in magnitude, as those of the Kerr black hole (BH) Killing horizons. We focus on two particular contexts of special significance for their observational implications. A set of these orbits is located in the BH photons shell. Therefore the analysis also connects the red-shifting or blue-shifting from replicas (defined through the BH light surfaces) to the BH shadow boundaries. We then concentrate on the equatorial, general relativistic, axially symmetric accretion disks, orbiting around the central attractor. In the analysis we adopted in particular the Polish doughnut models of geometrically thick toroids, to investigate the signals frequency-shifting from the horizons replica as related to the disks surface, inner edge and accretion flows. The findings map the red-shifting and blue-shifting regions of the signals in dependence to the photons impact parameter, view-angle, angular velocity of the emitter and BH spin. Co-rotating and counter-rotating replica could be identified through the red-shifting or blue-shifting of the emitted signals from the mapped regions.

gr-qc↗

arXiv2024

Inter--disks inversion surfaces

We consider a counter--rotating torus orbiting a central Kerr black hole (\textbf{BH}) with dimensionless spin $a$, and its accretion flow into the \textbf{BH}, in an agglomerate of an outer counter--rotating torus and an inner co--rotating torus. This work focus is the analysis of the inter--disks inversion surfaces. Inversion surfaces are spacetime surfaces, defined by the condition $u^{\phi}=0$ on the flow torodial velocity, located out of the \textbf{BH} ergoregion, and totally embedding the \textbf{BH}. They emerge as a necessary condition, related to the spacetime frame--dragging, for the counter--rotating flows into the central Kerr \textbf{BH}. In our analysis we study the inversion surfaces of the Kerr spacetimes for the counter--rotating flow from the outer torus, impacting on the inner co--rotating disk. Being totally or partially embedded in (internal to) the inversion surfaces, the inner co--rotating torus (or jet) could be totally or in part ``shielded", respectively, from the impact with flow with $a u^{\phi}<0$. We prove that, in general, in the spacetimes with $a<0.551$ the co--rotating toroids are always external to the accretion flows inversion surfaces. For $0.551 0.886$, a co--rotating torus could be entirely embedded in the inversion surface and, for larger spins, it is internal to the inversion surfaces. Tori orbiting in the \textbf{BH} outer ergoregion are a particular case. Further constraints on the \textbf{BHs} spins are discussed in the article.

gr-qc↗

arXiv2024

Horizon replicas in black hole shadows

Recently, new exploratory channels have opened up for the physics of highly compact objects, such as gravitational waves and black hole shadows. Moreover, more precise analysis and observations are now possible in the physics of accretion around compact objects. These advancements provide in particular an unprecedented insight into the physics near the horizons of a black hole. In this work we focus on the shadow boundary of a Kerr black hole, introducing observables related to special null orbits, called horizons replicas, solutions of the shadow edge equations which are related to particular photon orbits, defined by constraints on their impact parameter, carrying information about the angular momentum of the central spinning object. These orbits are related to particular regions on the shadow boundary and might be used to determine the spin of the black hole. The results provide the conditions by which horizon replicas are imprinted in the black hole shadow profile, in dependence on the black hole dimensionless spin and observational angle, providing eventually new templates for the future observations.

gr-qc↗

arXiv2024

Constraining photon trajectories in black hole shadows

We examine the shadow cast by a Kerr black hole, focusing on constraints on photons corresponding to different shadow boundaries. The photons are related to different orbital ranges and impact parameter values, creating a map of the shadow boundaries. Our analysis fixes also the conditions under which it is possible to observe an "imprint" of the black hole (outer) ergosurface and (outer) ergoregion on the Kerr black hole shadow boundary. The counter-rotating case resulted strongly constrained with respect to the co-rotating case, constituting a remarkable and significant difference where the counter-rotating component associated with the shadow boundary is strongly distinct from the co-rotating one. However, in this framework, even the co-rotating photons imply restrictions on conditions on the spins and planes, which are bounded by limiting values. We believe the results found here, being a tracer for the central black hole, can constitute new templates for the ongoing observations.

gr-qc↗

arXiv2024

Dark matter effect on black hole accretion disks

Comparing different dark matter (DM) models, we explore the DM influence on black hole (BH) accretion disk physics, considering corotating and counterrotating thick accretion tori orbiting a central spinning BH. Our results identify accretion onto a central BH as a good indicator of DM presence, signaling possible DM tracers in accretion physics. We analyze accretion around a spinning BH immersed in perfect-fluid dark matter, cold dark matter and scalar field dark matter. Our investigation addresses observational evidence of distinctive DM effects on toroidal accretion disks and protojet configurations, proving that BH accretion tori immersed in DM can present characteristics, such as interdisk cusp or double tori, which have usually been considered as tracers for superspinars and naked singularity attractors. Therefore, in this context DM influence on the BH geometry could manifest as superspinar mimickers. DM also affects the central spinning attractor energetics associated with accretion physics, and its influence on accretion disks can be searched for in a variation of the central BH energetics as an increase of the mass accretion rates.

gr-qc↗

arXiv2024

On photons and matter inversion spheres from complex super-spinars accretion structures

Our analysis focus on the dragging effects on the accretion flows and jet emission in Kerr super-spinars. These attractors are characterized by peculiar accretion structures as double tori, or special dragged tori in the ergoregion, produced by the balance of the hydrodynamic and centrifugal forces and also effects of super-spinars repulsive gravity. We investigate the accretion flows, constituted by particles and photons, from toroids orbiting a central Kerr super-spinar. As results of our analysis, in both accretion and jet flows, properties characterizing these geometries, that constitute possible strong observational signatures or these attractors, are highlighted. We found that the flow is characterized by closed surfaces, defining inversion coronas (spherical shell), with null the particles flow toroidal velocity ($u^ϕ=0$) embedding the central singularity. We proved that this region distinguishes proto-jets and accretion driven flows, co-rotating and counter-rotating flows. Therefore in both cases the flow carries information about the accretion structures around the central attractor, demonstrating that inversion points can constitute an observational aspect capable of distinguishing the super-spinars.

astro-ph.HE↗

arXiv2024

Inversion points of the accretion flows onto super-spinning Kerr attractors

We study the accretion flows towards a central Kerr super-spinning attractor, discussing the formation of the flow inversion points, defined by condition $u^ϕ=0$ on the particles flow axial velocity. We locate two closed surfaces, defining \emph{inversion coronas} (spherical shells), surrounding the central attractor. The coronas analysis highlights observational aspects distinguishing the central attractors and providing indications on their spin and the orbiting fluids. The inversion corona is a closed region, generally of small extension and thickness, which is for the counter-rotating flows of the order of $\lesssim 1.4 M$ (central attractor mass) on the vertical rotational axis. There are no co-rotating inversion points (from co-rotating flows). The results point to strong signatures of the Kerr super-spinars, provided in both accretion and jet flows. With very narrow thickness, and varying little with the fluid initial conditions and the emission process details, inversion coronas can have remarkable observational significance for primordial Kerr super-spinars predicted by string theory. The corona region closest to the central attractor is the most observably recognizable and active part, distinguishing black holes solutions from super-spinars. Our analysis expounds the Lense--Thirring effects and repulsive gravity effects in the super-spinning ergoregions.

gr-qc↗

arXiv2022

On light surfaces in black hole thermodynamics

We discuss the fundamentals of classical black hole (BH) thermodynamics in a new framework determined by light surfaces and their frequencies. This new approach allows us to study BH transitions inside the Kerr geometry. In the case of BHs, we introduce a new parametrization of the metric in terms of the maximum extractable rotational energy or, correspondingly, the irreducible mass, which is an alternative to the spin parametrization. It turns out that BH spacetimes with spins $a/M= \sqrt {8/9}$ and $a/M=1/\sqrt{2}$ show anomalies in the rotational energy extraction and surface gravity whereas the case $a/M=\sqrt{3}/2$ is of particular relevance to study the variations of the horizon area. We find the general conditions under which BH transitions can occur and express them in terms of the masses of the initial and final states. This shows that BH transitions in the Kerr geometry are not arbitrary but depend on the relationship between the mass and spin of the initial and final states. From an observational point of view, we argue that near the BH poles it is possible to detect photon orbits with frequencies that characterize the light surfaces analyzed in this work.

gr-qc↗

arXiv2022

Dragged surfaces. On the accretion tori in the ergoregion

We discuss the conditions for the existence of extended matter configurations orbiting in the ergoregion or close to the outer ergosurface of the Kerr black hole ("dragged" configurations). The corotating tori under consideration are perfect fluid configurations with barotropic equation of state, orbiting on the equatorial plane of the central Kerr black hole. The possibility of magnetized tori with a toroidal magnetic field is also discussed. Indications on the attractors where dragged tori can be observed are provided with the analysis of the fluid characteristics and geometrical features, relevant for the tori stability and their observations. QPOs emissions from the inner edges of the dragged tori are also discussed. We argue that the smaller dragged tori could be subjected to a characteristic instability, effect of the frame-dragging. This possibility is thoroughly explored. This can finally lead to the destruction of the torus (disk exfoliation) which can combine with accretion and processes present in the regions very close to the black hole horizon. Tori are characterized according to the central attractor dimensionless spin. These structures can be observed orbiting black holes with dimensionless spin a > 0.9897M.

gr-qc↗

arXiv2022

Extracting information on black hole horizons

We present some features of Kerr black hole horizons that are replicated on orbits accessible to outside observers. We use the concepts of horizon confinement and replicas to show that outside the outer horizon there exist photon orbits whose frequencies contain information about the inner horizon and that can, in principle, be detected through the emission spectra of black holes. It is shown that such photon orbits exist close to the rotation axis of the Kerr geometry. We argue that these results could be used to recognize and further investigate black holes and their horizons

gr-qc↗

arXiv2022

Limiting effects in tori clusters

We consider agglomerates of misaligned tori orbiting a supermassive black hole. The aggregate of tilted tori is modeled as a single orbiting configuration by introducing a leading function governing the distribution of toroids (and maximum pressure points inside the disks) around the black hole attractor. The orbiting clusters are composed by geometrically thick, pressure supported, perfect fluid tori. This analysis places constraints on the existence and properties of tilted tori and more general aggregates of orbiting disks. We study the constraints on the tori collision emergence and the instability of the agglomerates of tori with general relative inclination angles, the possible effects of the tori geometrical thickness and on the oscillatory phenomena. Some notes are discussed on the orbiting ringed structure in dependence of the dimensionless parameter $ξ$ representing the (total) BH rotational energy extracted versus the mass of the BH, associating $ξ$ to the characteristics of the accretion processes.

astro-ph.HE↗

arXiv2022

Lense-Thirring effect on accretion flow from counter-rotating tori

We study the accretion flow from a counter-rotating torus orbiting a central Kerr black hole (BH). We characterize the flow properties at the turning point of the accreting matter flow from the orbiting torus, defined by the condition $u^ϕ= 0$ on the flow torodial velocity. The counter-rotating accretion flow and jet-like flow turning point location along BH rotational axis is given. Some properties of the counter-rotating flow thickness and counter-rotating tori energetics are studied.The maximum amount of matter swallowed by the BH from the counter-rotating tori is determined by the background properties. The fast spinning BH energetics depends mostly on BH spin rather than on the properties of the counter-rotating fluids or the tori masses. The turning point is located in a narrow orbital corona (spherical shell), for photons and matter flow constituents, surrounding the BH stationary limit (outer ergosurface), depending on the BH spin-mass ratio and the fluid initial momentum only. The turning corona for jet-like-flow has larger thickness, it is separated from the torus flow turning corona and it is closer to the BH stationary limit. Turning points of matter accreting from torus and from jets are independent explicitly of the details of the accretion and tori model. The turning corona could be observable due to an increase of flow luminosity and temperature. The corona is larger on the BH equatorial plane, where it is the farthest from the central attractor, and narrower on the BH poles.

astro-ph.HE↗

arXiv2021

General relativistic rotational energy extraction from black holes-accretion disk systems

We constrain the BHs spin with the evaluation of the dimensionless parameter ξ, the total rotational energy extracted versus the BH mass. The energy extraction can power an outflow which can be then observed. We relate the energy extraction to the accreting configurations and the accretion processes occurring in a cluster of corotating and counter-rotating tori orbiting one central Kerr SMBH, associating ξto the accretion processes characteristics. We relate the regions of tori parameters to the energy extraction processes, binding ξto properties of light surfaces by using the bundles, relating measures in different regions of the spacetimes. We evaluate properties of the BH accretions disks, and correlate spacetimes prior and after their transition due to the energy extraction. Light surfaces are related to the generators of Killing horizons, proving limiting frequency of the stationary observers of the geometries. We consider the photon limiting curves of the stationary observers as constraints for various processes regulated by these frequencies, to relate different BH states, prior and after the energy extraction, investigating regions close to the BH horizons and rotational axis. From methodological view-point we used a naked singularity -BH correspondence defined with metric bundles to predict the BH--accretion disk system observational characteristics. The analysis points relevant BH spins a\approx0.94M, a\approx 0.7M and a\approx0.3M. We show the relation between the rotational law of the tori, the bundle characteristic frequency and the relativistic velocity defining the von Zeipel surfaces. The inferior limit on the formation of corotating is \ell/a\geq2, for counter-rotating tori \ell/a\leq -22/5 (\ell is the fluids specific angular momentum).

gr-qc↗

arXiv2021

Jet collision with accreting tori around SMBHs. GRHD and light surfaces constraints in aggregates of misaligned tori

We explore the possibility of jet collisions with accreting tori orbiting around SMBHs. The analysis provides constraints on formation and the observational evidences of the host configurations. We use a GRHD model, investigating the light surfaces contraints in aggregates of misaligned tori orbiting a central static Schwarzschild black hole. Each (toroidal) configuration of the agglomeration is a geometrically thick, pressure supported, perfect fluid torus. Aggregates include proto-jets, the open cusped solutions associated to the geometrically thick tori. Collision emergence and the stability properties of the aggregates are considered at different inclination angles relative to a fixed distant observer. We relate the constraints to the relevant frequencies of the configurations and fluid specific angular momentum, separating the constraints related to the fluids hydrodynamics and to the geometric backgrounds. We analyze existence of accreting tori supporting jet-emission. We discuss the existence of orbit-replicas that could host shadowing effects in replicas of the emissions in two regions, close and far from the BH (horizon replicas in jet shells). The investigation clarifies the role of the pressure gradients of the orbiting matter and the essential role of the radial gradient of the pressure in the determination of the disk verticality. Finally we analyze the possibility that a toroidal magnetic field could be related to the collimation of proto-jets.

astro-ph.HE↗

arXiv2020

Graph model overview, events scales structure and chains of events

We present a graph model for a background independent, relational approach to spacetime emergence. The general idea and the graph main features, detailed in [1], are discussed. This is a combinatorial (dynamical) metric graph, colored on vertexes, endowed with a classical distribution of colors probability on the graph vertexes. The graph coloring determines the graph structure in clusters of graph vertices (events) that can be monochromatic (homogeneous loops) or polychromatic (inhomogeneous loops). The probability is conserved after the graph conformal expansion from an initial seed graph state to higher (conformally expanded) graph states. The emerging structure has self-similar characteristics on different scales (states). From the coloring, different levels of vertices and thus graph levels arise as new aggregates of colored vertices. In this second (derived) graphs level, the derived graph vertices correspond to the polychromatic edges (with differently colored vertices) of the initial graph. Vertex aggregates are related, as some levels (graph states) to plexors and twistors (involving Clifford statistics). Two metric levels are defined on the colored graph, the first level is a natural metric defined on the graph, the second level emerges from the first and related, due to symmetries. Metric structure reflects the graph colored structure under conformal transformations evolving with its states under conformal expansion. In some special cases vertices/events chains could be related to strings generalizations.

gr-qc↗

arXiv2020

Embedded BHs and multipole globules: Clustered misaligned thick accretion disks around static SMBHs

We investigate clusters of misaligned (inclined) tori orbiting a central static Schwarzschild black hole. To this purpose we considered a set of geometrically thick, pressure supported, perfect fluid tori analyzing purely hydrodynamic models. We study the tori collision emergence and, consequently, the stability properties of the aggregates composed by tori with different inclination angles relative to a fixed distant observer. The aggregate of tilted tori is modeled as a single orbiting configuration, by introducing a leading function governing the distribution of toroids around the black hole attractor. Eventually the tori agglomerate can be seen, depending on the tori thickness, as a (multipole) gobules of orbiting matter, with different toroidal spin orientations , covering the embedded central black hole. These systems are shown to include tori with emerging instability phase related to accretion onto the central black hole. Therefore we provide an evaluation of quantities related to tori energetics such as the mass-flux, the enthalpy-flux, and the flux thickness depending on the model parameters for polytropic fluids. Consequently this analysis places constraints on the existence and properties of tilted tori and aggregate of misaligned disks. Some notes are included on aggregates including proto-jets, represented by open cusped solutions associated to the geometrically thick tori.

astro-ph.HE↗

arXiv2020

Aspects of GR-MHD in High-Energy Astrophysics

This work focuses on some key aspects of the General Relativistic (GR)-magnetohydrodynamic (MHD) applications in High-Energy Astrophysics. We discuss the relevance of the GR-HD counterparts formulation exploring the geometrically thick disk models and constraints of the GR-MHD shaping the physics of accreting configurations. Models of clusters of tori orbiting a central super-massive black hole (SMBH) are described. These orbiting tori aggregates form sets of geometrically thick, pressure supported, perfect fluid tori, associated to complex instability processes including tori collision emergence and empowering a wide range of activities related expectantly to the embedding matter environment of Active Galaxy Nuclei. Some notes are included on aggregates combined with proto-jets, represented by open cusped solutions associated to the geometrically thick tori. This exploration of some key concepts of the GR-MHD formulation in its applications to High-Energy Astrophysics starts with the discussion of the initial data problem for a most general Einstein-Euler-Maxwell system addressing the problem with a relativistic geometric background. The system is then set in quasi linear hyperbolic form, and the reduction procedure is argumented. Then, considerations follow on the analysis of the stability problem for self-gravitating systems with determined symmetries considering the perturbations also of the geometry part on the quasi linear hyperbolic onset. Thus we focus on the ideal GR-MHD and self-gravitating plasma ball. We conclude with the models of geometrically thick GR-HD disks gravitating around a Kerr SMBH in their GR-HD formulation and including in the force balance equation of the disks the influence of a toroidal magnetic field, determining its impact in tori topology and stability

astro-ph.HE↗

arXiv2020

Kerr metric bundles. Killing horizons confinement, light-surfaces and horizons replicas

We provide a complete characterization of the metric Killing bundles (or metric bundles) of the Kerr geometry. Metric bundles, first introduced in [21] can be generally defined for axially symmetric spacetimes with Killing horizons and, for the case of Kerr geometries, are sets of black holes (BHs) or black holes and naked singularities (NSs) geometries. Each metric of a bundle has an equal limiting photon (orbital) frequency, which defines the bundle and coincides with the frequency of a Killing horizon in the extended plane. In this plane each bundle is represented as a curve tangent to the curve that represents the horizons, which thus emerge as the envelope surfaces of the metric bundles. We show that the horizons frequency can be used to establish a connection between BHs and NSs, providing an alternative representation of such spacetimes in the extended plane and an alternative definition of the BH horizons. We introduce the concept of inner horizon confinement and horizons replicas and study the possibility of detecting their frequencies. We study the bundle characteristic frequencies constraining the inner horizon confinement in the outer region of the plane i.e. the possibility of detect frequency related to the inner horizon, and the horizons replicas, structures which may be detectable, for example, from the emission spectra of BHs spacetimes. It is shown that such observations can be performed close to the rotation axis of the Kerr geometry, depending on the BH spin. We argue that these results could be used to further investigate black holes and their thermodynamic properties.

gr-qc↗