arXiv subjects

D. R. Reese

Publications and source records attributed to D. R. Reese.

At least 19 recordsLinked to original sources

arXiv2026

PlatoSim: An end-to-end PLATO camera simulator for modelling high-precision space-based photometry

PLAnetary Transits and Oscillations of stars (PLATO) is the ESA M3 space mission dedicated to detect and characterise transiting exoplanets including information from the asteroseismic properties of their stellar hosts. The uninterrupted and high-precision photometry provided by space-borne instruments such as PLATO require long preparatory phases. An exhaustive list of tests are paramount to design a mission that meets the performance requirements, and as such, simulations are an indispensable tool in the mission preparation. To accommodate PLATO's need of versatile simulations prior to mission launch - that at the same time describe accurately the innovative but complex multi-telescope design - we here present the end-to-end PLATO simulator specifically developed for the purpose, namely PlatoSim. We show step-by-step the algorithms embedded into the software architecture of PlatoSim that allow the user to simulate photometric time series of CCD images and light curves in accordance to the expected observations of PLATO. In the context of the PLATO payload, a general formalism of modelling, end-to-end, incoming photons from the sky to the final measurement in digital units is discussed. We show the strong predictive power of PlatoSim through its diverse applicability and contribution to numerous working groups within the PLATO Mission Consortium. This involves the on-going mechanical integration and alignment, performance studies of the payload, the pipeline development and assessments of the scientific goals. PlatoSim is a state-of-the-art simulator that is able to produce the expected photometric observations of PLATO to a high level of accuracy. We demonstrate that PlatoSim is a key software tool for the PLATO mission in the preparatory phases until mission launch and prospectively beyond.

astro-ph.IM↗

arXiv2026

Stellar age determination using deep neural networks: Isochrone ages for 1.3 million stars, based on BaSTI, MIST, PARSEC, Dartmouth and SYCLIST evolutionary grids

We aim to develop a model-driven deep learning approach to age determination, by training neural networks on stellar evolutionary grids. Contrary to the usual data-driven deep learning approach of using prior age estimates as training data, our method has the potential for a wider and less biased range of application. The low computational cost of deep learning methods compared to bayesian isochrone-fitting allows for a broad analysis of large spectroscopic catalogues. We train multilayer perceptrons on different stellar evolutionary grids to map [M/H], MG, (GBP - GRP) to stellar age $τ$. We combine Gaia photometry and parallaxes, metallicities and $α$ elements from spectroscopic surveys and extinction maps, which are passed through the neural networks to estimate stellar ages. We apply our method to the LAMOST DR10, GALAH DR3 & DR4 and APOGEE DR17 spectroscopic surveys, for which we estimate the ages using the BaSTI tracks, along with other stellar evolutionary models. We leverage this novel technique to study, for the first time, differences in age estimates from several evolutionary grids applied on very large datasets. In addition, we date 13 open clusters and one globular cluster and find a median absolute deviation with literature ages of 0.20 Gyr. Along with the stellar ages catalogues from our estimates, we release NEST (Neural Estimator of Stellar Times), a python package to estimate stellar age based on this work, as well as a web interface. We show that, when using the same evolutionary grid, our method retrieves the same ages as a bayesian approach like SPInS, for only a fraction of the computational cost, with a 60,000 speedup factor for a typical star. This model-driven deep learning technique thus opens up the way for broad galactic archeology studies on the largest datasets available today and in the near future with upcoming surveys such as 4MOST.

astro-ph.GA↗

arXiv2025

Is a 1D perturbative method sufficient for asteroseismic modelling of $β$ Cephei pulsators? Implications for measurements of rotation and internal magnetic fields

Asymmetries in the observed rotational splittings of a multiplet contain information about the star's rotation profile and internal magnetic field. However, to exploit this information, highly accurate theoretical predictions are needed. We aim to quantify the difference in the predicted mode asymmetries between a 1D perturbative method, and a 2D method that includes a 2D stellar structure model, which takes rotation into account. We then put these differences in the context of asteroseismic measurements of internal magnetic fields. We couple the 1D pulsation codes GYRE and StORM to the 2D stellar structure code ESTER and compare the oscillation predictions with the results from the 2D TOP pulsation code. We focus on ZAMS models representative of rotating $β$~Cephei pulsators, going up to 20% of the critical rotation rate. We find a generally good agreement between the oscillation frequencies resulting from the 1D and 2D pulsation codes. Since the magnetic asymmetries are small compared to the differences in the rotational asymmetries resulting from the 1D and 2D predictions, accurate measurements of the magnetic field are in most cases challenging. Differences in the predicted mode asymmetries between 1D perturbative methods and 2D non-perturbative methods can greatly hinder accurate measurements of internal magnetic fields in main-sequence pulsators with low-order modes. Nevertheless, reasonably accurate measurements could be possible with $n_{pg} \ge 2$ modes if the internal rotation is roughly below 10% of the critical rotation frequency for (aligned) magnetic fields on the order of a few hundred kG. While the differences between the 1D and 2D predictions are mostly too large for internal magnetic field detections, the rotational asymmetries predicted by StORM are in general accurate enough for asteroseismic modelling of the stellar rotation in main-sequence stars.

astro-ph.SR↗

arXiv2024

New stellar age estimates using SPInS based on Gaia DR3 photometry and LAMOST DR8 abundances

Reliable stellar age estimates are fundamental for testing several problems in modern astrophysics, in particular since they set the time scales of Galactic dynamical and chemical evolution. In this study, we determine ages using only Gaia DR3 photometry and parallaxes, in combination with interstellar extinction maps, spectroscopic metallicities and $α$ abundances from the latest data release (DR8) of the LAMOST survey. In contrast with previous age estimates, we do not use spectroscopic effective temperatures or surface gravities, thus relying on the excellent precision and accuracy of the Gaia photometry. We use a new version of the publicly available SPInS code with improved features, including the on-the-fly computation of the autocorrelation time and the automatic convergence evaluation. We determine reliable age estimates for 35,096 and 243,768 sub-giant and main-sequence turn-off stars in the LAMOST DR8 low- and medium-resolution surveys with typical uncertainties smaller than 10%. In addition, we successfully test our method on more than 4,000 stars of 14 well-studied open and globular star clusters covering a wide range of ages, confirming the reliability of our age and uncertainty estimates.

astro-ph.GA↗

arXiv2024

Predicted asteroseismic detection yield for solar-like oscillating stars with PLATO

We determine the expected yield of detections of solar-like oscillations for the PLATO ESA mission. We used a formulation from the literature to calculate the probability of detection and validated it with Kepler data. We then applied this approach to the PLATO P1 and P2 samples with the lowest noise level and the much larger P5 sample, which has a higher noise level. We used the information available in in the PIC 1.1.0, including the current best estimate of the signal-to-noise ratio. We also derived relations to estimate the uncertainties of seismically inferred stellar mass, radius and age and applied those relations to the main sequence stars of the PLATO P1 and P2 samples with masses equal to or below 1.2 $\rm{M}_\odot$ for which we had obtained a positive seismic detection. We found that one can expect positive detections of solar-like oscillations for more than 15 000 FGK stars in one single field after a two-years run of observation. For main sequence stars with masses $\leq 1.2 \rm{M}_\odot$, we found that about 1131 stars satisfy the PLATO requirements for the uncertainties of the seismically inferred stellar masses, radii and ages in one single field after a two-year run of observation. The baseline observation programme of PLATO consists in observing two fields of similar size (in the Southern and Northern hemispheres) for two years each. The expected seismic yields of the mission are more 30000 FGK dwarfs and subgiants with positive detections of solar-like oscillations, enabling to achieve the mission stellar objectives. The PLATO mission should produce a sample of seismically extremely well characterized stars of quality equivalent to the Kepler Legacy sample but containing a number of stars $\sim$ 80 times larger if observing two PLATO fields for two years each. They will represent a goldmine which will make possible significant advances in stellar modelling.

astro-ph.SR↗

arXiv2021

PLATO Hare-and-Hounds exercise: Asteroseismic model fitting of main-sequence solar-like pulsators

Asteroseismology is a powerful tool to infer fundamental stellar properties. The use of these asteroseismic-inferred properties in a growing number of astrophysical contexts makes it vital to understand their accuracy. Consequently, we performed a hare-and-hounds exercise where the hares simulated data for 6 artificial main-sequence stars and the hounds inferred their properties based on different inference procedures. To mimic a pipeline such as that planned for the PLATO mission, all hounds used the same model grid. Some stars were simulated using the physics adopted in the grid, others a different one. The maximum relative differences found (in absolute value) between the inferred and true values of the mass, radius, and age were 4.32 per cent, 1.33 per cent, and 11.25 per cent, respectively. The largest systematic differences in radius and age were found for a star simulated assuming gravitational settling, not accounted for in the model grid, with biases of -0.88 per cent (radius) and 8.66 per cent (age). For the mass, the most significant bias (-3.16 per cent) was found for a star with a helium enrichment ratio outside the grid range. Moreover, a ~7 per cent dispersion in age was found when adopting different prescriptions for the surface corrections or shifting the classical observations by $\pm 1σ$. The choice of the relative weight given to the classical and seismic constraints also impacted significantly the accuracy and precision of the results. Interestingly, only a few frequencies were required to achieve accurate results on the mass and radius. For the age the same was true when at least one $l=2$ mode was considered.

astro-ph.SR↗

arXiv2020

Oscillations of 2D ESTER models. I. The adiabatic case

Recent numerical and theoretical considerations have shown that low-degree acoustic modes in rapidly rotating stars follow an asymptotic formula and recent observations of pulsations in rapidly rotating delta Scuti stars seem to match these expectations. However, a key question is whether strong gradients or discontinuities can adversely affect this pattern to the point of hindering its identification. Other important questions are how rotational splittings are affected by the 2D rotation profiles expected from baroclinic effects and whether it is possible to probe the rotation profile using these splittings. Accordingly, we numerically calculate pulsation modes in continuous and discontinuous rapidly rotating models produced by the 2D ESTER (Evolution STEllaire en Rotation) code. This spectral multi-domain code self-consistently calculates the rotation profile based on baroclinic effects and allows us to introduce discontinuities without loss of numerical accuracy. Pulsations are calculated using an adiabatic version of the Two-dimensional Oscillation Program (TOP) code. The variational principle is used to confirm the high accuracy of the pulsation frequencies and to derive an integral formula that closely matches the generalised rotational splittings, except when modes are involved in avoided crossings. This potentially allows us to probe the the rotation profile using inverse theory. Acoustic glitch theory, applied along the island mode orbit deduced from ray dynamics, can correctly predict the periodicity of the glitch frequency pattern produced by a discontinuity or the Gamma1 dip related to the He II ionisation zone in some of the models. The asymptotic frequency pattern remains sufficiently well preserved to potentially allow its detection in observed stars.

astro-ph.SR↗

arXiv2019

A realistic two-dimensional model of Altair

Fast rotation is responsible for important changes in the structure and evolution of stars. Optical long baseline interferometry now permits the study of its effects on the stellar surface, mainly gravity darkening and flattening. We aim to determine the fundamental parameters of the fast-rotating star Altair, in particular its evolutionary stage, mass, and differential rotation, using state-of-the-art stellar interior and atmosphere models together with interferometric, spectroscopic, and asteroseismic observations. We use ESTER 2D stellar models to produce the relevant surface parameters needed to create intensity maps from atmosphere models. Interferometric and spectroscopic observables are computed from these intensity maps and several stellar parameters are then adjusted using the MCMC algorithm Emcee. We determined Altair's equatorial radius to be 2.008 +/- 0.006 Rsun, the position angle 301.1 +/- 0.3 degrees, the inclination 50.7 +/- 1.2 degrees, and the equatorial angular velocity 0.74 +/- 0.01 times the Keplerian angular velocity. This angular velocity leads to a flattening of 0.220 +/- 0.003. We also deduce from the spectroscopically derived vsini ~ 243 km/s, a true equatorial velocity of ~314 km/s corresponding to a rotation period of 7h46m (~3 c/d). The data also impose a strong correlation between mass, metallicity, hydrogen abundance, and core evolution. Thanks to asteroseismic data, we constrain the mass of Altair to 1.86 +/- 0.03 Msun and further deduce its metallicity Z = 0.019 and its core hydrogen mass fraction Xc = 0.71, assuming an initial solar hydrogen mass fraction X = 0.739. These values suggest that Altair is ~100 Myrs old. Finally, the 2D ESTER model also gives the internal differential rotation of Altair, showing that its core rotates approximately 50% faster than the envelope, while the surface differential rotation does not exceed 6%.

astro-ph.SR↗

arXiv2019

The first view of $δ$ Scuti and $γ$ Doradus stars with the TESS mission

We present the first asteroseismic results for $δ$ Scuti and $γ$ Doradus stars observed in Sectors 1 and 2 of the TESS mission. We utilise the 2-min cadence TESS data for a sample of 117 stars to classify their behaviour regarding variability and place them in the Hertzsprung-Russell diagram using Gaia DR2 data. Included within our sample are the eponymous members of two pulsator classes, $γ$ Doradus and SX Phoenicis. Our sample of pulsating intermediate-mass stars observed by TESS also allows us to confront theoretical models of pulsation driving in the classical instability strip for the first time and show that mixing processes in the outer envelope play an important role. We derive an empirical estimate of 74% for the relative amplitude suppression factor as a result of the redder TESS passband compared to the Kepler mission using a pulsating eclipsing binary system. Furthermore, our sample contains many high-frequency pulsators, allowing us to probe the frequency variability of hot young $δ$ Scuti stars, which were lacking in the Kepler mission data set, and identify promising targets for future asteroseismic modelling. The TESS data also allow us to refine the stellar parameters of SX Phoenicis, which is believed to be a blue straggler.

astro-ph.SR↗

arXiv2019

Revisiting the pulsational characteristics of the exoplanet host star $β$ Pictoris

Exoplanet properties crucially depend on their host stars' parameters. In case the exoplanet host star shows pulsations, asteroseismology can be used for an improved description of the stellar parameters. We aim to revisit the pulsational properties of beta Pic and identify its pulsation modes from normalised amplitudes in five different passbands. We also investigate the potential presence of a magnetic field. We conduct a frequency analysis using three seasons of BRITE-Constellation observations in the BRITE blue and red filters, the ~620-day long bRing light curve and the nearly 8-year long SMEI photometric time series. We calculate normalised amplitudes using all passbands including previously published values obtained from ASTEP observations. We investigate the magnetic properties of beta Pic using spectropolarimetric observations conducted with the HARPSpol instrument. Using 2D rotating models, we fit the normalised amplitudes and frequencies through Monte Carlo Markov Chains. We identify 15 pulsation frequencies in the range from 34 to 55c/d, where two display clear amplitude variability. We use the normalised amplitudes in up to five passbands to identify the modes as three l = 1, six l = 2 and six l = 3 modes. beta Pic is shown to be non-magnetic with an upper limit of the possible undetected dipolar field of 300G. Multiple fits to the frequencies and normalised amplitudes are obtained including one with a near equator-on inclination for beta Pic, which corresponds to our expectations based on the orbital inclination of beta Pic b and the orientation of the circumstellar disk. This solution leads to a rotation rate of 27% of the Keplerian break-up velocity, a radius of 1.497+-0.025Rsun, and a mass of 1.797+-0.035Msun. The ~2% errors in radius and mass do not account for uncertainties in the models and a potentially erroneous mode-identification.

astro-ph.SR↗

arXiv2018

Mean density inversions for red giants and red clump stars

Since the CoRoT and Kepler missions, the availability of high quality seismic spectra for red giants has made them the standard clocks and rulers for Galactic Archeology. With the expected excellent data from the TESS and PLATO missions, red giants will again play a key role in Galactic studies and stellar physics, thanks to the precise masses and radii determined by asteroseismology. The determination of these quantities is often based on so-called scaling laws, which have been used extensively for main-sequence stars. We show how the SOLA inversion technique can provide robust determinations of the mean density of red giants within 1 per cent of the real value, using only radial oscillations. Combined with radii determinations from Gaia of around 2 per cent precision, this approach provides robust, less model-dependent masses with an error lower than 10 per cent. It will improve age determinations, helping to accurately dissect the Galactic structure and history. We present results on artificial data of standard models, models including an extended atmosphere from averaged 3D simulations and non-adiabatic frequency calculations to test surface effects, and on eclipsing binaries. We show that the inversions provide very robust mean density estimates, using at best seismic information. However, we also show that a distinction between red-giant branch and red-clump stars is required to determine a reliable estimate of the mean density. The stability of the inversion enables an implementation in automated pipelines, making it suitable for large samples of stars.

astro-ph.SR↗

arXiv2018

Asteroseismic modelling of solar-type stars: internal systematics from input physics and surface correction methods

Asteroseismic forward modelling techniques are being used to determine fundamental properties (e.g. mass, radius, and age) of solar-type stars. The need to take into account all possible sources of error is of paramount importance towards a robust determination of stellar properties. We present a study of 34 solar-type stars for which high signal-to-noise asteroseismic data is available from multi-year Kepler photometry. We explore the internal systematics on the stellar properties, that is, associated with the uncertainty in the input physics used to construct the stellar models. In particular, we explore the systematics arising from: (i) the inclusion of the diffusion of helium and heavy elements; and (ii) the uncertainty in solar metallicity mixture. We also assess the systematics arising from (iii) different surface correction methods used in optimisation/fitting procedures. The systematics arising from comparing results of models with and without diffusion are found to be 0.5%, 0.8%, 2.1%, and 16% in mean density, radius, mass, and age, respectively. The internal systematics in age are significantly larger than the statistical uncertainties. We find the internal systematics resulting from the uncertainty in solar metallicity mixture to be 0.7% in mean density, 0.5% in radius, 1.4% in mass, and 6.7% in age. The surface correction method by Sonoi et al. and Ball & Gizon's two-term correction produce the lowest internal systematics among the different correction methods, namely, ~1%, ~1%, ~2%, and ~8% in mean density, radius, mass, and age, respectively. Stellar masses obtained using the surface correction methods by Kjeldsen et al. and Ball & Gizon's one-term correction are systematically higher than those obtained using frequency ratios.

astro-ph.SR↗

arXiv2017

Constraining convective regions with asteroseismic linear structural inversions

Context. Convective regions in stellar models are always associated with uncertainties, for example due to extra-mixing or the possible inaccurate position of the transition from convective to radiative transport of energy. These have a strong impact on stellar models and their fundamental parameters. The most promising method to reduce these uncertainties is to use asteroseismology to derive diagnostics probing the structural characteristics of these regions. Aims. We wish to use custom-made integrated quantities to improve the capabilities of seismology to probe convective regions in stellar interiors. We hope to increase the number of indicators obtained with structural seismic inversions to provide additional constraints on stellar models and the fundamental parameters determined from theoretical modeling. Methods. First, we present new kernels associated with a proxy of the entropy in stellar interiors. We then show how these kernels can be used to build custom-made integrated quantities probing convective regions inside stellar models. We present two indicators suited to probe convective cores and envelopes, respectively, and test them on artificial data. Results. We show that it is possible to probe both convective cores and envelopes using appropriate indicators obtained with structural inversion techniques. These indicators provide direct constraints on a proxy of the entropy of the stellar plasma, sensitive to the characteristics of convective regions. These constraints can then be used to improve the modeling of solar-like stars by providing an additional degree of selection of models obtained from classical forward modeling approaches. We also show that in order to obtain very accurate indicators, we need l = 3 modes for the envelope but that the core-conditions indicator is more flexible in terms of the seismic data required for its use.

astro-ph.SR↗

arXiv2017

Determining the metallicity of the solar envelope using seismic inversion techniques

The solar metallicity issue is a long-lasting problem of astrophysics, impacting multi- ple fields and still subject to debate and uncertainties. While spectroscopy has mostly been used to determine the solar heavy elements abundance, helioseismologists at- tempted providing a seismic determination of the metallicity in the solar convective enveloppe. However, the puzzle remains since two independent groups prodived two radically different values for this crucial astrophysical parameter. We aim at provid- ing an independent seismic measurement of the solar metallicity in the convective enveloppe. Our main goal is to help provide new information to break the current stalemate amongst seismic determinations of the solar heavy element abundance. We start by presenting the kernels, the inversion technique and the target function of the inversion we have developed. We then test our approach in multiple hare-and-hounds exercises to assess its reliability and accuracy. We then apply our technique to solar data using calibrated solar models and determine an interval of seismic measurements for the solar metallicity. We show that our inversion can indeed be used to estimate the solar metallicity thanks to our hare-and-hounds exercises. However, we also show that further dependencies in the physical ingredients of solar models lead to a low accuracy. Nevertheless, using various physical ingredients for our solar models, we determine metallicity values between 0.008 and 0.014.

astro-ph.SR↗

arXiv2017

Inversions of the Ledoux discriminant: a closer look at the tachocline

Modelling the base of the solar convective envelope is a tedious problem. Since the first rotation inversions, solar modellers are confronted with the fact that a region of very limited extent has an enormous physical impact on the Sun. Indeed, it is the transition region from differential to solid body rotation, the tachocline, which furthermore is influenced by turbulence and is also supposed to be the seat of the solar magnetic dynamo. Moreover, solar models show significant disagreement with the sound speed profile in this region. In this paper, we show how helioseismology can provide further constraints on this region by carrying out an inversion of the Ledoux discriminant. We compare these inversions for Standard Solar Models built using various opacity tables and chemical abundances and discuss the origins of the discrepancies between Solar Models and the Sun.

astro-ph.SR↗

arXiv2017

Precise surface gravities of $δ$ Scuti stars from asteroseismology

The work reported here demonstrates that it is possible to accurately determine surface gravities of $δ$ Sct stars using the frequency content from high precision photometry and a measurement of the parallax. Using a sample of 10 eclipsing binary systems with a $δ$ Sct component and the unique $δ$ Sct star discovered with a transiting planet, WASP-33, we were able to refine the $Δν-\barρ$ relation. Using this relation and parallaxes, we obtained independent values for the masses and radii, allowing us to calculate the surface gravities without any constraints from spectroscopic or binary analysis. A remarkably good agreement was found between our results and those published, extracted from the analysis of the radial velocities and light curves of the systems. This reinforces the potential of $Δν$ as a valuable observable for $δ$ Sct stars and settles the degeneracy problem for the $\log g$ determination through spectroscopy.

astro-ph.SR↗

arXiv2017

Seismic inversion of the solar entropy: A case for improving the Standard Solar Model

The Sun is the most constrained and well-studied of all stars. As a consequence, the physical ingredients entering solar models are used as a reference to study all other stars observed in the Universe. However, our understanding of the solar structure is still imperfect, as illustrated by the current debate on the heavy element abundances in the Sun. We wish to provide additional information on the solar structure by carrying out structural inversions of a new physical quantity, a proxy of the entropy of the solar plasma which properties are very sensitive to the temperature gradient below the convective zone. We use new structural kernels to carry out direct inversions of an entropy proxy of the solar plasma and compare the solar structure to various standard solar models built using various opacity tables and chemical abundances. We also link our results to classical tests commonly found in the literature. Our analysis allows us to probe more efficiently the uncertain regions of the solar models, just below the convective zone, paving the way for new in-depth analyses of the Sun taking into account additional physical uncertainties of solar models beyond the specific question of chemical abundances.

astro-ph.SR↗

arXiv2017

Frequency regularities of acoustic modes and multi-colour mode identification in rapidly rotating stars

Context: Mode identification has remained a major obstacle in the interpretation of pulsation spectra in rapidly rotating stars. Aims: We would like to test mode identification methods and seismic diagnostics in rapidly rotating stars, using oscillation spectra based on new theoretical predictions. Methods: We investigate the auto-correlation function and Fourier transform of theoretically calculated frequency spectra, in which modes are selected according to their visibilities. Given the difficulties in predicting intrinsic mode amplitudes, we experimented with various ad-hoc prescriptions for setting these, including using random values. Furthermore, we analyse the ratios between mode amplitudes observed in different photometric bands. Results: When non-random intrinsic mode amplitudes are used, our results show that it is possible to extract the large frequency separation or half its value, and sometimes twice the rotation rate, from the auto-correlation function. The Fourier transforms are mostly sensitive to the large frequency separation or half its value. When the intrinsic mode amplitudes include random factors, the results are far less favourable. We also find that amplitude ratios provide a good way of grouping together modes with similar characteristics. By analysing the frequencies of these groups, it is possible to constrain mode identification as well as determine the large frequency separation and the rotation rate.

astro-ph.SR↗