arXiv subjects

D. Salabert

Publications and source records attributed to D. Salabert.

At least 19 recordsLinked to original sources

arXiv2026

Interferometric Survey of Stellar Parameters: Mass of the metallic A-type binary $\beta$ Aur

With the capabilities of the new visible CHARA/SPICA instrument and the multiple spectral band operation of CHARA, our goal is to resolve orbits of short-period binaries and develop a robust framework for combining interferometric, spectroscopic, and photometric observations into a single consistent model. For our target sample, we selected suitable binaries based on brightness, angular separation, and orbital properties based on the expected performance of the CHARA/SPICA instrument. As a case study, we analysed the bright eclipsing binary $\beta$ Aurigae, composed of two slightly evolved A1 stars. We combined new interferometric observations of $\beta$ Aur obtained with CHARA/SPICA, MIRC-X, and MYSTIC with archival MIRC data, radial velocities, and light curves. We first derived astrometric positions from interferometric observables and computed an orbital solution. Afterwards, we implemented a unified model, capable of tying interferometric modelling with the ellc code to simultaneously fit all observables using MCMC sampling. We performed a detailed analysis of the noise statistics of each data set and in the end we adopted a profile likelihood approach to account for underestimated noise and systematics. We derived a consistent orbital and physical solution for $\beta$ Aur through joint modelling. The inclusion of interferometric data tightly constrains the angular semi-major axis and inclination. Using profile likelihood to account for the different intrinsic levels of uncertainty of the fundamentally different observables, we derived the masses of the two stars, $M_1 = 2.359 \pm 0.005$ M$_S$ and $M_2 = 2.293 \pm 0.004$ M$_S$, their radii $R_1 = 2.752 \pm 0.002$ R$_S$ and $R_2 = 2.622 \pm 0.002$ R$_S$, and the distance to the binary, $d = 24.30\pm0.05$ pc.

astro-ph.SR↗

arXiv2026

CHARA/SPICA: The six-telescope visible combiner and near-infrared fringe tracker for the CHARA Array

The suite called Stellar Parameters and Images with a Cophased Array (SPICA) has two interferometric instruments installed at the focus of the CHARA Array located at Mount Wilson, CA. SPICA is made of SPICA-VIS, a fiber-fed six-beam visible spectrograph with three spectral resolutions, and SPICA-FT, a six-beam near-infrared fringe tracker for the fast stabilization of the fringes. SPICA is opening access to imaging in the visible domain with an unprecedented angular resolution down to 0.2 milliarcseconds. It has been designed around a large survey of fundamental parameters of stars over the Hertzsprung- Russell diagram, aiming at understanding the deviations from the standard empirical relations of stellar physics as a function of activity: limb darkening, multiplicity, rotation, winds, and environments. SPICA makes use of the advanced technologies in electron multiplying detectors in the visible and electron- avalanche photodiode arrays in the near-infrared. It benefits from the newly commissioned adaptive optics on the one-meter telescopes of the array. The modules of the visible instrument, SPICA-VIS, optimize the injection of light into single-mode fibers for spatial filtering before spectral dispersion in the image plane. The fringe tracker, SPICA-FT, performs group-delay and phase-delay tracking for six beams in the H band. SPICA-FT can use an all-in-one or ABCD encoding of the fringe signals. SPICA is operational on sky and is close to reaching the expected performance in low spectral resolution, in particular, for the Interferometric Survey of Stellar Parameters (ISSP). More work is still needed to achieve the ultimate performance in terms of sensitivity and to allow operations with higher spectral resolutions.

astro-ph.IM↗

arXiv2024

GRAVITY for MATISSE -- Improving the MATISSE performance with the GRAVITY fringe tracker

Context: MATISSE, the mid-infrared spectro-imaging instrument of VLTI, was designed to deliver its advertised performance when paired with an external second generation fringe tracker. Science observation started in 2019, demonstrating imaging capabilities and faint science target observations. Now, The GRAVITY fringe tracker stabilizes the MATISSE fringes which allows using all spectroscopic modes and improves sensitivity and data accuracy. Aims: We present how the MATISSE and GRAVITY instruments were adapted to make the GRAVITY fringe tracker work with MATISSE, under the umbrella of the aptly-named GRA4MAT project, led by ESO in collaboration with the two instrument consortia. Methods: We detail the software modifications needed to implement an acquisition and observing sequence specific to GRA4MAT, including simultaneous fringe tracking and chopping and a narrow off-axis capability inspired by the galactic center and exoplanet capability of GRAVITY. We explain the modified data collection and reduction processes. We show how we leveraged the recent fringe tracker upgrade to implement features specific to its use with MATISSE, e.g. fringe jumps mitigation with an improved group delay control and simultaneous fringe tracking and chopping with a new state machine. Results: We successfully demonstrate significant improvements to the MATISSE instrument. Observations can now be performed at higher spectral resolutions of up to $R\sim3300$ and across the full LM bands at once. Long detector integration times, made possible with stabilized fringes, have improved the LM-bands sensitivity by a factor of 10. Low flux biases in coherently-reduced N-band data have been eliminated. The L-band transfer function is now higher and more stable. We finally illustrate the scientific potential of GRA4MAT with a preview of the first exoplanet observation made by MATISSE on $\beta$ Pictoris b.

astro-ph.IM↗

arXiv2022

Deciphering stellar chorus: apollinaire, a Python 3 module for Bayesian peakbagging in helio- and asteroseismology

Since the asteroseismic revolution, availability of efficient and reliable methods to extract stellar-oscillation mode parameters has been one of the keystone of modern stellar physics. In the helio- and asteroseismology fields, these methods are usually referred as peakbagging. We introduce in this paper the apollinaire module, a new Python 3 open-source Markov Chains Monte Carlo (MCMC) framework dedicated to peakbagging. The theoretical framework necessary to understand MCMC peakbagging methods for disk-integrated helio- and asteroseismic observations are extensively described. In particular, we present the models that are used to estimate the posterior probability function in a peakbagging framework. A description of the apollinaire module is then provided. We explain how the module enables stellar background, p-mode global pattern and individual-mode parameters extraction. By taking into account instrumental specificities, stellar inclination angle, rotational splittings, and asymmetries, the module allows fitting a large variety of p-mode models suited for solar as well as stellar data analysis with different instruments. After having been validated through a Monte Carlo fitting trial on synthetic data, the module is benchmarked by comparing its outputs with results obtained with other peakbagging codes. An analysis of the PSD of 89 one-year subseries of GOLF observations is performed. Six stars are also selected from the Kepler LEGACY sample in order to demonstrate the code abilities on asteroseismic data. The parameters we extract with apollinaire are in good agreement with those presented in the literature and demonstrate the precision and reliability of the module.

astro-ph.SR↗

arXiv2022

Improving the diameters of interferometric calibrators with MATISSE

A good knowledge of the angular diameters of stars used to calibrate the observables in stellar interferometry is fundamental. As the available precision for giant stars is worse than the required per cent level, we aim to improve the knowledge of many diameters using MATISSE (Multiple AperTure mid-Infrared SpectroScopic Experiment) data in its different instrumental configurations. Using the squared visibility MATISSE observable, we compute the angular diameter value, which ensures the best-fitting curves, assuming an intensity distribution of a uniform disc. We take into account that the transfer function varies over the wavelength and is different from one instrumental configuration to another. The uncertainties on the diameters are estimated using the residual bootstrap method. Using the low spectral resolution mode in the L band, we observed a set of 35 potential calibrators selected in the Mid-infrared stellar Diameter and Flux Compilation Catalogue with diameters ranging from about 1 to 3 mas. We reach a precision on the diameter estimates in the range 0.6 per cent to 4.1 per cent. The study of the stability of the transfer function in visibility over two nights makes us confident in our results. In addition, we identify one star, 75 Vir initially present in the calibrator lists, for which our method does not converge, and prove to be a binary star. This leads us to the conclusion that our method is actually necessary to improve the quality of the astrophysical results obtained with MATISSE, and that it can be used as a useful tool for 'bad calibrator' detection.

astro-ph.IM↗

arXiv2018

Seismic signatures of magnetic activity in solar-type stars observed by Kepler

The properties of the acoustic modes are sensitive to magnetic activity. The unprecedented long-term Kepler photometry, thus, allows stellar magnetic cycles to be studied through asteroseismology. We search for signatures of magnetic cycles in the seismic data of Kepler solar-type stars. We find evidence for periodic variations in the acoustic properties of about half of the 87 analysed stars. In these proceedings, we highlight the results obtained for two such stars, namely KIC 8006161 and KIC 5184732.

astro-ph.SR↗

arXiv2018

Signatures of magnetic activity in the seismic data of solar-type stars observed by Kepler

In the Sun, the frequencies of the acoustic modes are observed to vary in phase with the magnetic activity level. These frequency variations are expected to be common in solar-type stars and contain information about the activity-related changes that take place in their interiors. The unprecedented duration of Kepler photometric time-series provides a unique opportunity to detect and characterize stellar magnetic cycles through asteroseismology. In this work, we analyze a sample of 87 solar-type stars, measuring their temporal frequency shifts over segments of length 90 days. For each segment, the individual frequencies are obtained through a Bayesian peak-bagging tool. The mean frequency shifts are then computed and compared with: 1) those obtained from a cross-correlation method; 2) the variation in the mode heights; 3) a photometric activity proxy; and 4) the characteristic timescale of the granulation. For each star and 90-d sub-series, we provide mean frequency shifts, mode heights, and characteristic timescales of the granulation. Interestingly, more than 60% of the stars show evidence for (quasi-)periodic variations in the frequency shifts. In the majority of the cases, these variations are accompanied by variations in other activity proxies. About 20% of the stars show mode frequencies and heights varying approximately in phase, in opposition to what is observed for the Sun.

astro-ph.SR↗

arXiv2017

On the frequency dependence of p-mode frequency shifts induced by magnetic activity in Kepler solar-like stars

The variations of the frequencies of the low-degree acoustic oscillations in the Sun induced by magnetic activity show a dependence with radial order. The frequency shifts are observed to increase towards higher-order modes to reach a maximum of about 0.8 muHz over the 11-yr solar cycle. A comparable frequency dependence is also measured in two other main-sequence solar-like stars, the F-star HD49933, and the young 1-Gyr-old solar analog KIC10644253, although with different amplitudes of the shifts of about 2 muHz and 0.5 muHz respectively. Our objective here is to extend this analysis to stars with different masses, metallicities, and evolutionary stages. From an initial set of 87 Kepler solar-like oscillating stars with already known individual p-mode frequencies, we identify five stars showing frequency shifts that can be considered reliable using selection criteria based on Monte Carlo simulations and on the photospheric magnetic activity proxy Sph. The frequency dependence of the frequency shifts of four of these stars could be measured for the l=0 and l=1 modes individually. Given the quality of the data, the results could indicate that a different physical source of perturbation than in the Sun is dominating in this sample of solar-like stars.

astro-ph.SR↗

arXiv2017

Photospheric activity of the Sun with VIRGO and GOLF: Comparison with standard activity proxies

We study the variability of solar activity using new photospheric proxies originally developed for the analysis of stellar magnetism with the CoRoT and Kepler photometric observations. These proxies are obtained by tracking the temporal modulations in the observations associated to the spots and magnetic features as the Sun rotates. We analyze here 21 years, spanning solar cycles 23 and 24, of the observations collected by the space-based photometric VIRGO and radial velocity GOLF instruments on board the SoHO satellite. The photospheric activity proxy Sph is then calculated for each of the three VIRGO photometers as well as the associated Svel proxy from the radial velocity GOLF observations. Comparisons with several standard solar activity proxies sensitive to different layers of the Sun demonstrate that these new activity proxies, Sph and Svel, provide a new manner to monitor solar activity. We show that both the long- and short-term magnetic variabilities respectively associated to the 11-year cycle and the quasi-biennial oscillation are well monitored, and that the magnetic field interaction between the subsurface, the photosphere, and the chromosphere of the Sun, was modified between Cycle 24 and Cycle 23. Furthermore, the photometric proxies show a wavelength dependence of the response function of the solar photosphere among the three channels of the VIRGO photometers, providing inputs for the study of the stellar magnetism of Sun-like stars.

astro-ph.SR↗

arXiv2017

Asymptotic g modes: Evidence for a rapid rotation of the solar core

We present the identification of very low frequency g modes in the asymptotic regime and two important parameters that have long been waited for: the core rotation rate, and the asymptotic equidistant period spacing of these g modes. The GOLF instrument on board the SOHO space observatory has provided two decades of full-disk helioseismic data. In the present study, we search for possible collective frequency modulations that are produced by periodic changes in the deep solar structure. Such modulations provide access to only very low frequency g modes, thus allowing statistical methods to take advantage of their asymptotic properties. For oscillatory periods in the range between 9 and nearly 48 hours, almost 100 g modes of spherical harmonic degree 1 and more than 100 g modes of degree 2 are predicted. They are not observed individually, but when combined, they unambiguouslyprovide their asymptotic period equidistance and rotational splittings, in excellent agreement with the requirements of the asymptotic approximations. Previously, p-mode helioseismology allowed the g-mode period equidistance parameter $P_0$ to be bracketed inside a narrow range, between approximately 34 and 35 minutes. Here, $P_0$ is measured to be 34 min 01 s, with a 1 s uncertainty. The previously unknown g-mode splittings have now been measured from a non-synodic reference with very high accuracy, and they imply a mean weighted rotation of 1277 $\pm$ 10 nHz (9-day period) of their kernels, resulting in a rapid rotation frequency of 1644 $\pm$ 23 nHz (period of one week) of the solar core itself, which is a factor 3.8 $\pm$ 0.1 faster than the rotation of the radiative envelope. The g modes are known to be the keys to a better understanding of the structure and dynamics of the solar core. Their detection with these precise parameters will certainly stimulate a new era of research in this field.

astro-ph.SR↗

arXiv2017

Surface rotation of Kepler red giant stars

Kepler allows the measurement of starspot variability in a large sample of field red giants for the first time. With a new method that combines autocorrelation and wavelet decomposition, we measure 361 rotation periods from the full set of 17,377 oscillating red giants in our sample. This represents 2.08% of the stars, consistent with the fraction of spectroscopically detected rapidly rotating giants in the field. The remaining stars do not show enough variability to allow us to measure a reliable surface rotation period. Because the stars with detected rotation periods have measured oscillations, we can infer their global properties, e.g. mass and radius, and quantitatively evaluate the predictions of standard stellar evolution models as a function of mass. Consistent with results for cluster giants when we consider only the 4881 intermediate-mass stars, M>2.0 M$_\odot$ from our full red giant sample, we do not find the enhanced rates of rapid rotation expected from angular momentum conservation. We therefore suggest that either enhanced angular momentum loss or radial differential rotation must be occurring in these stars. Finally, when we examine the 575 low-mass (M<1.1 M$_\odot$) red clump stars in our sample, which were expected to exhibit slow (non-detectable) rotation, 15% of them actually have detectable rotation. This suggests a high rate of interactions and stellar mergers on the red giant branch.

astro-ph.SR↗

arXiv2017

Metallicity effect on stellar granulation detected from oscillating red giants in open clusters

The effect of metallicity on the granulation activity in stars is still poorly understood. Available spectroscopic parameters from the updated APOGEE-\textit{Kepler} catalog, coupled with high-precision photometric observations from NASA's \textit{Kepler} mission spanning more than four years of observation, make oscillating red giant stars in open clusters crucial testbeds. We determine the role of metallicity on the stellar granulation activity by discriminating its effect from that of different stellar properties such as surface gravity, mass, and temperature. We analyze 60 known red giant stars belonging to the open clusters NGC 6791, NGC 6819, and NGC 6811, spanning a metallicity range from [Fe/H] $\simeq -0.09$ to $0.32$. The parameters describing the granulation activity of these stars and their $ν_\mathrm{max}$, are studied by considering the different masses, metallicities, and stellar evolutionary stages. We derive new scaling relations for the granulation activity, re-calibrate existing ones, and identify the best scaling relations from the available set of observations. We adopted the Bayesian code DIAMONDS for the analysis of the background signal in the Fourier spectra of the stars. We performed a Bayesian parameter estimation and model comparison to test the different model hypotheses proposed in this work and in the literature. Metallicity causes a statistically significant change in the amplitude of the granulation activity, with a dependency stronger than that induced by both stellar mass and surface gravity. We also find that the metallicity has a significant impact on the corresponding time scales of the phenomenon. The effect of metallicity on the time scale is stronger than that of mass. A higher metallicity increases the amplitude of granulation and meso-granulation signals and slows down their characteristic time scales toward longer periods.

astro-ph.SR↗

arXiv2017

Lithium abundance and rotation of seismic solar analogues - Solar and stellar connection from Kepler and Hermes observations

Lithium abundance A(Li) and surface rotation are good diagnostic tools to probe the internal mixing and angular momentum transfer in stars. We explore the relation between surface rotation, A(Li) and age in a sample of seismic solar-analogue (SA) stars and study their possible binary nature. We select a sample of 18 SA observed by the NASA Kepler satellite for an in-depth analysis. Their seismic properties and surface rotation are well constrained from previous studies. About 53 hours of high-resolution spectroscopy were obtained to derive fundamental parameters and A(Li). These values were combined and confronted with seismic masses, radii and ages, as well as surface rotation periods. We identify a total of 6 binary systems. A well-defined relation between A(Li) and rotation was obtained. With models constrained by the characterisation of the individual mode frequencies for single stars, we identify a sequence of three SA with similar mass (~1.1Mo) and stellar ages ranging between 1 to 9 Gyr. Within the realistic estimate of ~7% for the mass uncertainty, we find a good agreement between the measured A(Li) and the predicted A(Li) evolution from a grid of models calculated with the Toulouse-Geneva stellar evolution code, which includes rotational internal mixing, calibrated to reproduce solar chemical properties. We present A(Li) for a consistent spectroscopic survey of SA with a mass of 1.00+/-0.15Mo, and characterised through asteroseismology and surface rotation rates based on Kepler observations. The correlation between A(Li) and P_rot supports the gyrochronological concept for stars younger than the Sun. The consensus between measured A(Li) for solar analogues with model grids, calibrated onto the Sun's chemical properties suggests that these targets share the same internal physics. In this light, the solar Li and rotation rate appear to be normal for a star like the Sun.

astro-ph.SR↗

arXiv2016

Effect of Kepler calibration on global seismic and background parameters

Calibration issues associated to scrambled collateral smear affecting the Kepler short-cadence data were discovered in the Data Release 24 and were found to be present in all the previous data releases since launch. In consequence, a new Data Release 25 was reprocessed to correct for these problems. We perform here a preliminary study to evaluate the impact on the extracted global seismic and background parameters between data releases. We analyze the sample of seismic solar analogs observed by Kepler in short cadence between Q5 and Q17. We start with this set of stars as it constitutes the best sample to put the Sun into context along its evolution, and any significant differences on the seismic and background parameters need to be investigated before any further studies of this sample can take place. We use the A2Z pipeline to derive both global seismic parameters and background parameters from the Data Release 25 and previous data releases and report on the measured differences.

astro-ph.SR↗

arXiv2016

Probing seismic solar analogues through observations with the NASA Kepler space telescope and HERMES high-resolution spectrograph

Stars similar to the Sun, known as solar analogues, provide an excellent opportunity to study the preceding and following evolutionary phases of our host star. The unprecedented quality of photometric data collected by the \Kepler NASA mission allows us to characterise solar-like stars through asteroseismology and study diagnostics of stellar evolution, such as variation of magnetic activity, rotation and the surface lithium abundance. In this project, presented in a series of papers by Salabert et al. (2016a,b) and Beck et al (2016a,b), we investigate the link between stellar activity, rotation, lithium abundance and oscillations in a group of 18 solar-analogue stars through space photometry, obtained with the NASA Kepler space telescope and from currently 50+ hours of ground-based, high-resolution spectroscopy with the Hermes instrument. In these proceedings, we first discuss the selection of the stars in the sample, observations and calibrations and then summarise the main results of the project. By investigating the chromospheric and photospheric activity of the solar analogues in this sample, it was shown that for a large fraction of these stars the measured activity levels are compatible to levels of the 11-year solar activity cycle 23. A clear correlation between the lithium abundance and surface rotation was found for rotation periods shorter than the solar value. Comparing the lithium abundance measured in the solar analogues to evolutionary models with the Toulouse-Geneva Evolutionary Code (TGEC), we found that the solar models calibrated to the Sun also correctly describe the set of solar/stellar analogs showing that they share the same internal mixing physics. Finally, the star KIC 3241581 and KIC 10644353 are discussed in more detail.

astro-ph.SR↗

arXiv2016

Magnetic activity of seismic solar analogs

We present our latest results on the solar-stellar connection by studying 18 solar analogs that we identified among the Kepler seismic sample (Salabert et al., 2016a). We measured their magnetic activity properties using observations collected by the Kepler satellite and the ground-based, high-resolution Hermes spectrograph. The photospheric (Sph) and chromospheric (S) magnetic activity proxies of these seismic solar analogs are compared in relation to solar activity. We show that the activity of the Sun is actually comparable to the activity of the seismic solar analogs. Furthermore, we report on the discovery of temporal variability in the acoustic frequencies of the young (1 Gyr-old) solar analog KIC10644253 with a modulation of about 1.5 years, which agrees with the derived photospheric activity (Salabert et al., 2016b). It could actually be the signature of the short-period modulation, or quasi-biennal oscillation, of its magnetic activity as observed in the Sun and the 1-Gyr-old solar analog HD30495. In addition, the lithium abundance and the chromospheric activity estimated from Hermes confirms that KIC10644253 is a young and more active star than the Sun.

astro-ph.SR↗

arXiv2016

The solar-stellar connection: Magnetic activity of seismic solar analogs

Finding solar-analog stars with fundamental properties as close as possible to the Sun and studying the characteristics of their surface magnetic activity is a very promising way to understand the solar variability and its associated dynamo process. However, the identification of solar-analog stars depends on the accuracy of the estimated stellar parameters. Thanks to the photometric CoROT and Kepler space missions, the addition of asteroseismic data was proven to provide the most accurate fundamental properties that can be derived from stellar modeling today. Here, we present our latest results on the solar-stellar connection by studying 18 solar analogs that we identified among the Kepler seismic sample (Salabert et al., 2016a). We measured their magnetic activity properties using the observations collected by the Kepler satellite and the ground-based, high-resolution HERMES spectrograph. The photospheric (Sph) and chromospheric (S) magnetic activity proxies of these seismic solar analogs are compared in relation to the solar activity. We show that the activity of the Sun is comparable to the activity of the seismic solar analogs, within the maximum-to-minimum temporal variations of the 11-year solar activity cycle. Furthermore, we report on the discovery of temporal variability in the acoustic frequencies of the young (1 Gyr-old) solar analog KIC10644253 with a modulation of about 1.5 years, which agrees with the derived photospheric activity Sph (Salabert et al, 2016b). It could be the signature of the short-period modulation, or quasi-biennal oscillation, of its magnetic activity as observed in the Sun and in the 1-Gyr-old solar analog HD30495. In addition, the lithium abundance and the chromospheric activity estimated from HERMES confirms that KIC10644253 is a young and more active star than the Sun.

astro-ph.SR↗

arXiv2016

Kepler Observations of the Asteroseismic Binary HD 176465

Binary star systems are important for understanding stellar structure and evolution, and are especially useful when oscillations can be detected and analysed with asteroseismology. However, only four systems are known in which solar-like oscillations are detected in both components. Here, we analyse the fifth such system, HD 176465, which was observed by Kepler. We carefully analysed the system's power spectrum to measure individual mode frequencies, adapting our methods where necessary to accommodate the fact that both stars oscillate in a similar frequency range. We also modelled the two stars independently by fitting stellar models to the frequencies and complementary parameters. We are able to cleanly separate the oscillation modes in both systems. The stellar models produce compatible ages and initial compositions for the stars, as is expected from their common and contemporaneous origin. Combining the individual ages, the system is about 3.0$\pm$0.5 Gyr old. The two components of HD 176465 are young physically-similar oscillating solar analogues, the first such system to be found, and provide important constraints for stellar evolution and asteroseismology.

astro-ph.SR↗