arXiv subjects

D. Schmidt

Publications and source records attributed to D. Schmidt.

At least 19 recordsLinked to original sources

arXiv2025

Auger@TA: In-situ Cross-Calibration of the World's Largest Cosmic Ray Observatories

The Pierre Auger Observatory (Auger) and the Telescope Array (TA) are the world's two largest ultra-high-energy cosmic ray (UHECR) observatories. They operate in the Southern and Northern hemispheres, respectively, at similar latitudes but with distinct surface detector (SD) designs. A significant challenge in studying UHECR physics across the full sky is the apparent discrepancy in flux measurements between the two experiments. This discrepancy could arise from astrophysical differences and/or systematic effects related to their detector designs and sensitivities to extensive air shower components. To address this, the Auger@TA working group aims to cross-calibrate the two observatories with a self-triggering micro-Auger array within the TA array. This micro-array consists of eight Auger Surface Detector (SD) stations equipped with Water Cherenkov Detectors (WCDs) and AugerPrime Surface Scintillator Detectors. Seven SD stations, configured with a centered-1-PMT design, are arranged in a hexagonal pattern with one station in the center, with 1.5 km spacing, mirroring the Auger layout. The eighth station, which features a standard 3-PMT Auger station, is located in conjunction with a TA detector at the center of the hexagon, forming a triplet for high-statistics and low-uncertainty cross-calibration. A custom communication system that uses readily available components enables seamless communication between stations and remote access to each station through a central computer. The micro-array is now fully deployed, and initial data-taking is about to start. This presentation will detail the instrumentation, communication systems, central data acquisition system, expected performance of the micro-array, and preliminary results as appropriate.

astro-ph.HE↗

arXiv2025

How does picosecond structural deformation of (Ba,Sr)TiO$_{3}$ relate to the pyroelectric effect?

The pyroelectric effect in ferroelectric thin films is typically composed of different contributions, which are difficult to disentangle. In addition, clamping to the substrate interface plays an important role. We studied epitaxial (Ba,Sr)TiO$_3$ thin films grown on NdScO$_3$ to see if time-resolved measurements can shed more light on the complex interaction. In particular, we compare standard measurements of the pyroelectric coefficient by temperature-dependent hysteresis loops to transient deformation measurements on picosecond timescales in the same material. The advantage of the time-resolved approach lies in its increased sensitivity in thin films compared to that of polarization hysteresis measurements. Whereas a fast thermal expansion of the ferroelectric thin film was observed after femtosecond laser excitation of the intermediate SrRuO$_3$ layer, heat diffusion simulations reveal frustration of the thermal expansion, which might be explained with the charge dynamics at the Schottky barrier formed at the SrRuO$_3$/(Ba,Sr)TiO$_3$. More studies are required to quantitatively assess the individual contributions to the pyroelectric coefficient of the materials used in our layer architecture.

cond-mat.mtrl-sci↗

arXiv2025

Noise limits for dc SQUID readout of high-$Q$ resonators below 300 MHz

We present the limits on noise for the readout of cryogenic high-$Q$ resonators using dc Superconducting Quantum Interference Devices (SQUIDs) below 300 MHz. This analysis uses realized first-stage SQUIDs (previously published), whose performance is well described by Tesche-Clarke (TC) theory, coupled directly to the resonators. We also present data from a prototype second-stage dc SQUID array designed to couple to this first-stage SQUID as a follow-on amplifier with high system bandwidth. This analysis is the first full consideration of dc SQUID noise performance referred to a high-$Q$ resonator over this frequency range, and is presented relative to the standard quantum limit. We include imprecision, backaction, and backaction-imprecision noise correlations from TC theory, the noise contributed by the second-stage SQUIDs, wiring, and preamplifiers, and optimizations for both on-resonance measurements and off-resonance scan sensitivity. This architecture has modern relevance due to the increased interest in axion searches and the requirements of the DMRadio-m$^3$ axion search, which will use dc SQUIDs in this frequency range.

quant-ph↗

arXiv2024

Decay Energy Spectrometry for Improved Nuclear Material Analysis at the IAEA NML

Decay energy spectrometry (DES) is a novel radiometric technique for high-precision analysis of nuclear materials. DES employs the unique thermal detection physics of cryogenic microcalorimeters with ultra-high energy resolution and 100$\%$ detection efficiency to accomplish high precision decay energy measurements. Low-activity nuclear samples of 1 Bq or less, and without chemical separation, are used to provide elemental and isotopic compositions in a single measurement. Isotopic ratio precisions of 1 ppm - 1,000 ppm (isotope dependent), which is close to that of the mass spectrometry, have been demonstrated in 12-hour DES measurements of ~5 Bq samples of certified reference materials of uranium (U) and plutonium (Pu). DES has very different systematic biases and uncertainties, as well as different sensitivities to nuclides, compared to mass-spectrometry techniques. Therefore, the accuracy and confidence of nuclear material assays can be improved by combining this new technique with existing mass-spectrometry techniques. Commercial-level DES techniques and equipment are being developed for the implementation of DES at the Nuclear Material Laboratory (NML) of International Atomic Energy Agency (IAEA) to provide complementary measurements to the existing technologies. The paper describes details of DES measurement methods, as well as DES precision and accuracy to U and Pu standard sources to discuss its capability in analysis of nuclear safeguards samples.

physics.ins-det↗

arXiv2023

The Use of the Signal at an Optimal Distance from the Shower Core as a Surrogate for Shower Size

When analysing data from air-shower arrays, it has become common practice to use the signal at a considerable distance from the shower axis ($r_\text{opt}$) as a surrogate for the size of the shower. This signal, $S(r_\text{opt}$), can then be related to the primary energy in a variety of ways. After a brief review of the reasons behind the introduction of $r_\text{opt}$ laid out in a seminal paper by Hillas in 1969, it will be shown that $r_\text{opt}$, is a more effective tool when detectors are laid out on a triangular grid than when detectors are deployed on a square grid. This result may have implications for explaining the differences between the flux observed by the Auger and Telescope collaborations above 10\,EeV and should be kept in mind when designing new shower arrays.

astro-ph.IM↗

arXiv2020

Limits from the Funk Experiment on the Mixing Strength of Hidden-Photon Dark Matter in the Visible and Near-Ultraviolet Wavelength Range

We present results from the FUNK experiment in the search for hidden-photon dark matter. Near the surface of a mirror, hidden photons may be converted into ordinary photons. These photons are emitted perpendicular to the surface and have an energy equal to the mass of the dark matter hidden photon. Our experimental setup consists of a large, spherical mirror with an area of more than 14 m$^2$, which concentrates the emitted photons into its central point. Using a detector sensitive to visible and near-UV photons, we can exclude a kinetic-mixing coupling of stronger than $\chi \approx 10^{-12}$ in the mass range of 2.5 to 7 eV, assuming hidden photons comprise all of the dark matter. The experimental setup and analysis used to obtain this limit are discussed in detail.

astro-ph.CO↗

arXiv2019

Enhanced light-matter interaction in an atomically thin semiconductor coupled with dielectric nano-antennas

Unique structural and optical properties of atomically thin two-dimensional semiconducting transition metal dichalcogenides enable in principle their efficient coupling to photonic cavities with optical modes volumes close to or below the diffraction limit. Recently, it has become possible to make all-dielectric nano-cavities with reduced mode volumes and negligible non-radiative losses. Here, we realise low-loss high-refractive-index dielectric gallium phosphide (GaP) nano-antennas with small mode volumes coupled to atomic mono- and bilayers of WSe$_2$. We observe a photoluminescence enhancement exceeding 10$^4$ compared with WSe$_2$ placed on planar GaP, and trace its origin to a combination of enhancement of the spontaneous emission rate, favourable modification of the photoluminescence directionality and enhanced optical excitation efficiency. A further effect of the coupling is observed in the photoluminescence polarisation dependence and in the Raman scattering signal enhancement exceeding 10$^3$. Our findings reveal dielectric nano-antennas as a promising platform for engineering light-matter coupling in two-dimensional semiconductors.

physics.app-ph↗

arXiv2018

Observation of Subradiant Atomic Momentum States with Bose-Einstein Condensates in a Recoil Resolving Optical Ring Resonator

We experimentally investigate the formation of subradiant atomic momentum states in Bose-Einstein condensates inside a recoil resolving optical ring resonator according to the theoretical proposal of Cola, Bigerni, and Piovella. The atoms are pumped from the side with laser light that contains two frequency components. They resonantly drive cavity assisted Raman transitions between three discreet atomic momentum states. Within a few hundred microseconds, the system evolves into a stationary subradiant state. In this state, the condensate develops two density gratings suitable to diffract the two frequency components of the pump field into the resonator. Both components destructively interfere such that scattering is efficiently suppressed. A series of subradiant states for various amplitude ratios of the two pump components between 0 and 2.1 have been observed. The results are well explained with a three state quantum model in mean field approximation.

quant-ph↗

arXiv2018

Status of the HOLMES Experiment to Directly Measure the Neutrino Mass

The assessment of neutrino absolute mass scale is still a crucial challenge in today particle physics and cosmology. Beta or electron capture spectrum end-point study is currently the only experimental method which can provide a model independent measurement of the absolute scale of neutrino mass. HOLMES is an experiment funded by the European Research Council to directly measure the neutrino mass. HOLMES will perform a calorimetric measurement of the energy released in the electron capture decay of the artificial isotope $^{163}$Ho. In a calorimetric measurement the energy released in the decay process is entirely contained into the detector, except for the fraction taken away by the neutrino. This approach eliminates both the issues related to the use of an external source and the systematic uncertainties arising from decays on excited final states. The most suitable detectors for this type of measurement are low temperature thermal detectors, where all the energy released into an absorber is converted into a temperature increase that can be measured by a sensitive thermometer directly coupled with the absorber. This measurement was originally proposed in 1982 by A. De Rujula and M. Lusignoli, but only in the last decade the technological progress in detectors development has allowed to design a sensitive experiment. HOLMES plans to deploy a large array of low temperature microcalorimeters with implanted $^{163}$Ho nuclei. In this contribution we outline the HOLMES project with its physics reach and technical challenges, along with its status and perspectives.

physics.ins-det↗

arXiv2018

Photospheric Magnetic Fields of the Trailing Sunspots in Active Region NOAA 12396

The solar magnetic field is responsible for all aspects of solar activity. Sunspots are the main manifestation of the ensuing solar activity. Combining high-resolution and synoptic observations has the ambition to provide a comprehensive description of the sunspot growth and decay processes. Active region NOAA 12396 emerged on 2015 August 3 and was observed three days later with the 1.5-meter GREGOR solar telescope on 2015 August 6. High-resolution spectropolarimetric data from the GREGOR Infrared Spectrograph (GRIS) are obtained in the photospheric Si I $\lambda$ 1082.7 nm and Ca I $\lambda$1083.9 nm lines, together with the chromospheric He I $\lambda$1083.0 nm triplet. These near-infrared spectropolarimetric observations were complemented by synoptic line-of-sight magnetograms and continuum images of the Helioseismic and Magnetic Imager (HMI) and EUV images of the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO).

astro-ph.SR↗

arXiv2018

Inference of magnetic fields in the very quiet Sun

We present high-precision spectro-polarimetric data with high spatial resolution (0.4$''$) of the very quiet Sun at 1.56$\mu$m obtained with the GREGOR telescope to shed some light on this complex magnetism. Half of our observed quiet-Sun region is better explained by magnetic substructure within the resolution element. However, we cannot distinguish whether this substructure comes from gradients of the physical parameters along the line of sight or from horizontal gradients (across the surface). In these pixels, a model with two magnetic components is preferred, and we find two distinct magnetic field populations. The population with the larger filling factor has very weak ($\sim$150 G) horizontal fields similar to those obtained in previous works. We demonstrate that the field vector of this population is not constrained by the observations, given the spatial resolution and polarimetric accuracy of our data. The topology of the other component with the smaller filling factor is constrained by the observations for field strengths above 250 G: we infer hG fields with inclinations and azimuth values compatible with an isotropic distribution. The filling factors are typically below 30\%. We also find that the flux of the two polarities is not balanced. From the other half of the observed quiet-Sun area $\sim$50\% are two-lobed Stokes $V$ profiles, meaning that 23\% of the field of view can be adequately explained with a single constant magnetic field embedded in a non-magnetic atmosphere. The magnetic field vector and filling factor are reliable inferred in only 50\% based on the regular profiles. Therefore, 12\% of the field of view harbour hG fields with filling factors typically below 30\%. At our present spatial resolution, 70\% of the pixels apparently are non-magnetised.

astro-ph.SR↗

arXiv2018

Spectropolarimetric Observations of an Arch Filament System with GREGOR

We observed an arch filament system (AFS) in a sunspot group with the GREGOR Infrared Spectrograph attached to the GREGOR solar telescope. The AFS was located between the leading sunspot of negative polarity and several pores of positive polarity forming the following part of the sunspot group. We recorded five spectro-polarimetric scans of this region. The spectral range included the spectral lines Si I 1082.7 nm, He I 1083.0 nm, and Ca I 1083.9 nm. In this work we concentrate on the silicon line which is formed in the upper photosphere. The line profiles are inverted with the code `Stokes Inversion based on Response functions' to obtain the magnetic field vector. The line-of-sight velocities are determined independently with a Fourier phase method. Maximum velocities are found close to the ends of AFS fibrils. These maximum values amount to 2.4 km/s next to the pores and to 4 km/s at the sunspot side. Between the following pores, we encounter an area of negative polarity that is decreasing during the five scans. We interpret this by new emerging positive flux in this area canceling out the negative flux. In summary, our findings confirm the scenario that rising magnetic flux tubes cause the AFS.

astro-ph.SR↗

arXiv2018

Pinning Transition of Bose-Einstein Condensates in Optical Ring Resonators

We experimentally investigate the dynamic instability of Bose-Einstein condensates in an optical ring resonator that is asymmetrically pumped in both directions. We find that, beyond a critical resonator-pump detuning, the system becomes stable regardless of the pump strength. Phase diagrams and quenching curves are presented and described by numerical simulations. We discuss a physical explanation based on a geometric interpretation of the underlying nonlinear equations of motion.

physics.atom-ph↗

arXiv2017

Flows along arch filaments observed in the GRIS 'very fast spectroscopic mode'

A new generation of solar instruments provides improved spectral, spatial, and temporal resolution, thus facilitating a better understanding of dynamic processes on the Sun. High-resolution observations often reveal multiple-component spectral line profiles, e.g., in the near-infrared He I 10830 \AA\ triplet, which provides information about the chromospheric velocity and magnetic fine structure. We observed an emerging flux region, including two small pores and an arch filament system, on 2015 April 17 with the 'very fast spectroscopic mode' of the GREGOR Infrared Spectrograph (GRIS) situated at the 1.5-meter GREGOR solar telescope at Observatorio del Teide, Tenerife, Spain. We discuss this method of obtaining fast (one per minute) spectral scans of the solar surface and its potential to follow dynamic processes on the Sun. We demonstrate the performance of the 'very fast spectroscopic mode' by tracking chromospheric high-velocity features in the arch filament system.

astro-ph.SR↗

arXiv2016

Observation of three-particle complexes in WS$_2$ monolayers

Atomically thin semiconducting transition-metal dichalcogenides provide novel insights into the physics of many-body effects mediated by Coulomb interactions. Here, we report on temperature-dependent ($T$ = 7-295 K) reflectance contrast and photoluminescence studies of three-particle complexes in n-doped WS$_2$ monolayers. In low-temperature reflectance contrast spectra we observe distinct resonances of the neutral exciton, negative trion and exciton bound to a donor (X, X$^-$ and X$^D$). For temperatures above 80 K, reflectance contrast signatures of the X$^D$ disappear, whereas the X$^-$ remains detectable up to 240 K, despite the fact that the X$^D$ signal is more red-shifted from the neutral exciton than that of the X$^-$. This experimental observation underlines that in WS$_2$ the dissociation energy of X$^-$ considerably exceeds (factor of 2.5) that of X$^D$. In the laser-power dependent photoluminescence experiments, performed at room temperature, we demonstrate the control of the intensity ratio and energy position of the X and X$^-$ lines, which allows us to evaluate the trion binding energy. Moreover, we demonstrate that the room-temperature PL is sensitive to the environmental gas (ambient, N$_2$, He).

cond-mat.mes-hall↗

arXiv2016

Measuring the electron neutrino mass with improved sensitivity: the HOLMES experiment

HOLMES is a new experiment aiming at directly measuring the neutrino mass with a sensitivity below 2 eV. HOLMES will perform a calorimetric measurement of the energy released in the decay of $^{163}$Ho. The calorimetric measurement eliminates systematic uncertainties arising from the use of external beta sources, as in experiments with spectrometers. This measurement was proposed in 1982 by A. De Rujula and M. Lusignoli, but only recently the detector technological progress has allowed to design a sensitive experiment. HOLMES will deploy a large array of low temperature microcalorimeters with implanted $^{163}$Ho nuclei. HOLMES, besides being an important step forward in the direct neutrino mass measurement with a calorimetric approach, will also establish the potential of this approach to extend the sensitivity down to 0.1 eV and lower. In its final configuration HOLMES will collect about $3\cdot 10^{13}$ decays with 1000 detectors characterized by an instrumental energy resolution of the order of few eV and a time resolution of few microseconds. To embed the $^{163}$Ho into the gold absorbers a custom mass separator ion implanter is being developed. The detectors used for the HOLMES experiment will be Mo/Cu bilayers TESs (Transition Edge Sensors) on SiN$_x$ membrane with gold absorbers. Microwave multiplexed rf-SQUIDs are the best available technique to read out large array of such detectors. An extensive R&D activity is in progress in order to maximize the multiplexing factor while preserving the performances of the individual detectors. The current activities are focused on the the single detector performances optimization and on the $^{163}$Ho isotope production and embedding. A preliminary measurement of a sub-array of $4\times 16$ detectors is planned late in 2017. In this contribution we present the HOLMES project with its technical challenges, its status and perspectives.

physics.ins-det↗

arXiv2016

Three-dimensional structure of a sunspot light bridge

Active regions are the most prominent manifestations of solar magnetic fields; their generation and dissipation are fundamental problems in solar physics. Light bridges are commonly present during sunspot decay, but a comprehensive picture of their role in the removal of photospheric magnetic field is still missing. We study the three dimensional configuration of a sunspot and in particular its light bridge during one of the last stages of its decay. We present the magnetic and thermodynamical stratification inferred from full Stokes inversions of the photospheric Si I 10827 \AA\ and Ca I 10839 \AA\ lines obtained with the GREGOR Infrared Spectrograph of the GREGOR telescope at Observatorio del Teide, Tenerife, Spain. The analysis is complemented by a study of continuum images covering the disk passage of the active region, which are provided by the Helioseismic and Magnetic Imager on board the Solar Dynamics Observatory. The sunspot shows a light bridge with penumbral continuum intensity that separates the central umbra from a smaller umbra. We find that in this region the magnetic field lines form a canopy with lower magnetic field strength in the inner part. The photospheric light bridge is dominated by gas pressure (high-$\beta$), as opposed to the surrounding umbra where the magnetic pressure is higher. A convective flow is observed in the light bridge. This flow is able to bend the magnetic field lines and to produce field reversals. The field lines close above the light bridge and become as vertical and strong as in the surrounding umbra. We conclude that it develops because of two highly magnetized regions which come closer during the sunspot evolution.

astro-ph.SR↗

arXiv2016

Spectropolarimetric observations of an arch filament system with the GREGOR solar telescope

Arch filament systems occur in active sunspot groups, where a fibril structure connects areas of opposite magnetic polarity, in contrast to active region filaments that follow the polarity inversion line. We used the GREGOR Infrared Spectrograph (GRIS) to obtain the full Stokes vector in the spectral lines Si I 1082.7 nm, He I 1083.0 nm, and Ca I 1083.9 nm. We focus on the near-infrared calcium line to investigate the photospheric magnetic field and velocities, and use the line core intensities and velocities of the helium line to study the chromospheric plasma. The individual fibrils of the arch filament system connect the sunspot with patches of magnetic polarity opposite to that of the spot. These patches do not necessarily coincide with pores, where the magnetic field is strongest. Instead, areas are preferred not far from the polarity inversion line. These areas exhibit photospheric downflows of moderate velocity, but significantly higher downflows of up to 30 km/s in the chromospheric helium line. Our findings can be explained with new emerging flux where the matter flows downward along the fieldlines of rising flux tubes, in agreement with earlier results.

astro-ph.SR↗