arXiv subjects

D. Serebryakov

Publications and source records attributed to D. Serebryakov.

6 recordsLinked to original sources

arXiv2024

The Highly-Granular Time-of-Flight Neutron Detector for the BM@N experiment

A new Highly-Granular time-of-flight Neutron Detector (HGND) is being developed and constructed to measure azimuthal neutron flow and neutron yields in nucleus-nucleus interactions in heavy-ion collisions with energies up to 4A GeV in the fixed target experiment BM@N at JINR. Details of the detector design and results of performance studies for neutron identification and reconstruction are shown. Comparison of simulations for different options of the HGND layout at the BM@N is presented. Several proposed methods of neutron reconstruction including machine learning and cluster methods are discussed.

hep-ex↗

arXiv2024

Analytical description of the time-over-threshold method based on the time properties of plastic scintillators equipped with silicon photomultipliers

A new high-granular compact time-of-flight neutron detector for the identification and energy measurement of neutrons produced in nucleus-nucleus interactions at the BM@N experiment, Dubna, Russia, at energies up to 4 AGeV is under development. The detector consists of approximately 2000 fast plastic scintillators, each with dimensions of 40$\times$40$\times$25 mm$^3$, equiped with SiPM (Silicon Photomultiplier) with an active area of 6$\times$6 mm$^2$. The signal readout from these scintillators will employ a single-threshold multichannel Time-to-Digital Converter (TDC) to measure their response time and amplitude using the time-over-threshold (ToT) method. This article focuses on the analytical description of the signals from the plastic scintillator detectors equipped with silicon photomultipliers. This description is crucial for establishing the ToT-amplitude relationship and implementing slewing correction techniques to improve the time resolution of the detector. The methodology presented in this paper demonstrates that a time resolution at the 70 ps level can be achieved for the fast plastic scintillator coupled with silicon photomultiplier with epitaxial quenching resistors.

physics.ins-det↗

arXiv2024

Development of a 100 ps TDC based on a Kintex 7 FPGA for the High Granular Neutron Time-of-Flight detector for the BM@N experiment

The prototype of a TDC board has been developed for the new high granular time-of-flight neutron detector (HGND). The board is based on the standard LVDS 4x asynchronous oversampling using the xc7k160 FPGA with a 100 ps bin width. The HGND is being developed for the BM@N (Baryonic Matter at Nuclotron) experiment to identify neutrons and to measure their energies in heavy-ion collisions at ion beam energies up to 4 A GeV. The HGND consists of about 2000 scintillator detectors (cells) with a size of $40 \times 40 \times 25 mm^3$ and light readout with EQR15 11-6060D-S photodetectors. To measure the time resolution of the scintillator cells, the two-channel FPGA TDC board prototype with two scintillator cells was tested with an electron beam of "Pakhra" synchrotron at the LPI institute (Moscow, Russia). The measured cell time resolution is 146 ps, which is in a good agreement with the 142 ps time resolution measured with a 12-bit @ 5 GS/s CAEN DT5742 digitizer. For the full HGND, the TDC readout board with three such FPGAs will read 250 channels. In total, eight such TDC boards will be used for the full HGND at the BM@N experiment.

physics.ins-det↗

arXiv2023

Measurement of Time Resolution of Scintillation Detectors with EQR-15 Silicon Photodetectors for the Time-of-Flight Neutron Detector of the BM@N Experiment

To study the dependence of the equation of state of high density nuclear matter on the term characterizing the isospin (proton-neutron) asymmetry of nuclear matter, it is necessary to measure azimuthal flow of neutrons as well as azimuthal flow of charged particles from a dense nuclear matter in the nuclear-nuclear collisions. For this purpose INR RAS is developing a new high-granular neutron detector which will be used in the BM@N experiment at the extracted beam of the Nuclotron accelerator at JINR (Dubna). This detector will identify neutrons and measure their energies in the heavy-ion collisions up to 4 GeV per nucleon. This article presents the results of measurements of the time resolution and light yields of samples of scintillation detectors with sizes 40$\times$40$\times$25 mm$^3$ that will be used in a neutron detector based on the currently available fast plastic scintillator manufactured by JINR using an EQR15 11-6060D-S photodetector for light readout. For comparison, the results of measurements for a detector of the same size with a fast scintillator EJ-230 and with the same type of photodetector are given. The measurements were made on cosmic muons as well as on the electron synchrotron "Pakhra" of the Lebedev Physical Institute of the Russian Academy of Sciences located in Troitsk, Moscow.

hep-ex↗

arXiv2023

Development of High Granular Neutron Time-of-Flight Detector for the BM@N experiment

The HGND (High Granular Neutron Detector) is developed for the BM@N (Baryonic Matter at Nuclotron) experiment on the extracted beam of the Nuclotron at JINR, Dubna. The HGND will be used to measure the azimuthal flow of neutrons produced with energies ranging from 300 to 4000 MeV in heavy-ion collisions at beam energies of 2--4 AGeV. The azimuthal flow of charged particles will be measured using the BM@N magnet spectrometer. The data on the azimuthal flow of neutrons will shed light on the study of the high-density Equation of State (EoS) of isospin-symmetric nuclear matter, which is crucial for studying astrophysical phenomena such as neutron stars and their mergers. The HGND has a highly granular structure with approximately 2000 plastic scintillation detectors (cells), each measuring 4$\times$4$\times$2.5 cm$^3$. These detectors are arranged in 16 layers, with 121 detectors in each layer, and are subdivided by copper absorber plates with a thickness of 3 cm. The light from each cell is detected with SiPM (Silicon Photomultiplier) with an active area of 6$\times$6 mm$^2$. Developed multi-channel TDC board based on the Kintex FPGA chip with a bin width of 100 ps will be used to perform precise timestamp and amplitude measurement using Time-over-Threshold (ToT) method. Good spatial resolution due to the high granularity together with a cell's time resolution of 100-150 ps ensures neutron reconstruction with good energy resolution. The design of the detector as well as the results from test measurements and simulations have been presented.

hep-ex↗

arXiv2020

Performance of ALICE AD modules in the CERN PS test beam

Two modules of the AD detector have been studied with the test beam at the T10 facility at CERN. The AD detector is made of scintillator pads read out by wave-length shifters (WLS)coupled to clean fibres that carry the produced light to photo-multiplier tubes (PMTs). In ALICE the AD is used to trigger and study the physics of diffractive and ultra-peripheral collisions as well as for a variety of technical tasks like beam-gas background monitoring or as a luminometer. The position dependence of the modules' efficiency has been measured and the effect of hits on the WLS or PMTs has been evaluated. The charge deposited by pions and protons has been measured at different momenta of the test beam. The time resolution is determined as a function of the deposited charge. These results are important ingredients to better understand the AD detector, to benchmark the corresponding simulations, and very importantly they served as a baseline for a similar device, the Forward Diffractive Detector (FDD), being currently built and that will be in operation in ALICE during the LHC Runs 3 and 4.

physics.ins-det↗