arXiv subjects

D. Sluse

Publications and source records attributed to D. Sluse.

At least 55 records · Page 3Linked to original sources

arXiv2022

Shape, alignment, and mass distribution of baryonic and dark-matter halos in one EAGLE simulation

Accurate knowledge of the morphology of halos and its evolution are key constraints on the galaxy formation model as well as a determinant parameter of the strong-lensing phenomenon. Using the cosmological hydrodynamic simulation, the Evolution and Assembly of GaLaxies and their Environments (EAGLE), we aim to provide a comprehensive analysis of the evolution of the morphology of galaxy halos and of their mass distributions with a focus on the snapshot at redshift $z=0.5$. We developed an iterative strategy involving a principal component analysis (PCA) to investigate the properties of the EAGLE halos and the differences in alignment between the various components. The mass distributions of the dark-matter (DM), gas, and star halos are characterised by a half-mass radius, a concentration parameter and (projected) axis ratios. We present statistics of the shape parameters of 336\,540 halos from the EAGLE RefL0025N0376 simulation and describe their evolution from redshift $z=15$ to $z=0$. We measured the three-dimensional and two-dimensional projected shape parameters for the DM, the gas, and the star components as well as for all particles. At $z=0.5$, the minor axis of gas aligns with the minor axis of DM for massive halos ($M>10^{12}$ M$_\odot$), but this alignment is poorer for less massive halos. The DM halos axis ratios $b/a$ and $c/a$ have median values of $0.82 \pm 0.11$ and $0.64 \pm 0.12$, respectively. The sphericity of gas in halos w/ and w/o stars appears to be negatively correlated to the total mass, while the sphericity of DM is insensitive to it. The measured projected axis ratios, $b_p/a_p$, of star halos at $z=0.5$ have a median value of $0.80 \pm 0.07$, which is in good agreement with ground-based and space-based measurements within 1 $σ$. For DM halos, we measure a value of $0.85 \pm 0.06$.

astro-ph.GA↗

arXiv2022

Evidence for a milliparsec-separation Supermassive Binary Black Hole with quasar microlensing

We report periodic oscillations in the 15-year long optical light curve of the gravitationally lensed quasar QJ0158-4325. The signal is enhanced during a high magnification microlensing event undergone by the fainter lensed image of the quasar, between 2003 and 2010. We measure a period of $P_{o}=172.6\pm0.9$ days. We explore four scenarios to explain the origin of the periodicity: 1- the high magnification microlensing event is due to a binary star in the lensing galaxy, 2- QJ0158-4325 contains a massive binary black hole system in its final dynamical stage before merging, 3- the quasar accretion disk contains a bright inhomogeneity in Keplerian motion around the black hole, and 4- the accretion disk is in precession. Among these four scenarios, only a supermassive binary black hole can account for both the short observed period and the amplitude of the signal, through the oscillation of the accretion disk towards and away from high-magnification regions of a microlensing caustic. The short measured period implies that the semi-long axis of the orbit is $\sim10^{-3}$pc, and the coalescence timescale is $t_{coal}\sim1000$ years, assuming that the decay of the orbit is solely powered by the emission of gravitational waves. The probability of observing a system so close to coalescence suggests either a much larger population of supermassive black hole binaries than predicted, or, more likely, that some other mechanism significantly increases the coalescence timescale. Three tests of the binary black hole hypothesis include: i) the recurrence of oscillations in photometric monitoring during any future microlensing events in either image, ii) spectroscopic detection of Doppler shifts (up to 0.01$c$), and iii) the detection of gravitational waves through Pulsar Timing Array experiments, such as the SKA, which will have the sensitivity to detect the $\sim$100 nano-hertz emission.

astro-ph.GA↗

arXiv2022

TDCOSMO. IX. Systematic comparison between lens modelling software programs: time delay prediction for WGD 2038-4008

The importance of alternative methods for measuring the Hubble constant, such as time-delay cosmography, is highlighted by the recent Hubble tension. It is paramount to thoroughly investigate and rule out systematic biases in all measurement methods before we can accept new physics as the source of this tension. In this study, we perform a check for systematic biases in the lens modelling procedure of time-delay cosmography by comparing independent and blind time-delay predictions of the system WGD 2038-4008 from two teams using two different software programs: GLEE and LENSTRONOMY. The predicted time delays from the two teams incorporate the stellar kinematics of the deflector and the external convergence from line-of-sight structures. The un-blinded time-delay predictions from the two teams agree within $1.2σ$, implying that once the time delay is measured the inferred Hubble constant will also be mutually consistent. However, there is a $\sim$4$σ$ discrepancy between the power-law model slope and external shear, which is a significant discrepancy at the level of lens models before the stellar kinematics and the external convergence are incorporated. We identify the difference in the reconstructed point spread function (PSF) to be the source of this discrepancy. When the same reconstructed PSF was used by both teams, we achieved excellent agreement, within $\sim$0.6$σ$, indicating that potential systematics stemming from source reconstruction algorithms and investigator choices are well under control. We recommend that future studies supersample the PSF as needed and marginalize over multiple algorithms or realizations for the PSF reconstruction to mitigate the systematics associated with the PSF. A future study will measure the time delays of the system WGD 2038-4008 and infer the Hubble constant based on our mass models.

astro-ph.CO↗

arXiv2022

STRIDES: Automated uniform models for 30 quadruply imaged quasars

Gravitational time delays provide a powerful one step measurement of $H_0$, independent of all other probes. One key ingredient in time delay cosmography are high accuracy lens models. Those are currently expensive to obtain, both, in terms of computing and investigator time (10$^{5-6}$ CPU hours and $\sim$ 0.5-1 year, respectively). Major improvements in modeling speed are therefore necessary to exploit the large number of lenses that are forecast to be discovered over the current decade. In order to bypass this roadblock, building on the work by Shajib et al. (2019), we develop an automated modeling pipeline and apply it to a sample of 30 quadruply imaged quasars and one lensed compact galaxy, observed by the Hubble Space Telescope in multiple bands. Our automated pipeline can derive models for 30/31 lenses with few hours of human time and <100 CPU hours of computing time for a typical system. For each lens, we provide measurements of key parameters and predictions of magnification as well as time delays for the multiple images. We characterize the cosmography-readiness of our models using the stability of differences in Fermat potential (proportional to time delay) w.r.t. modeling choices. We find that for 10/30 lenses our models are cosmography or nearly cosmography grade (<3% and 3-5% variations). For 6/30 lenses the models are close to cosmography grade (5-10%). These results are based on informative priors and will need to be confirmed by further analysis. However, they are also likely to improve by extending the pipeline modeling sequence and options. In conclusion, we show that uniform cosmography grade modeling of large strong lens samples is within reach.

astro-ph.CO↗

arXiv2021

Constraining quasar structure using high-frequency microlensing variations and continuum reverberation

Gravitational microlensing is a powerful tool to probe the inner structure of strongly lensed quasars and to constrain parameters of the stellar mass function of lens galaxies. This is done by analysing microlensing light curves between the multiple images of strongly lensed quasars, under the influence of three main variable components: 1- the continuum flux of the source, 2- microlensing by stars in the lens galaxy and 3- reverberation of the continuum by the Broad Line Region (BLR). The latter, ignored by state-of-the-art microlensing techniques, can introduce high-frequency variations which we show carry information on the BLR size. We present a new method which includes all these components simultaneously and fits the power spectrum of the data in the Fourier space, rather than the observed light curve itself. In this new framework, we analyse COSMOGRAIL light curves of the two-image system QJ0158-4325 known to display high-frequency variations. Using exclusively the low frequency part of the power spectrum our constraint on the accretion disk radius agrees with the thin disk model estimate and previous work that fit the microlensing light curves in real space. However, if we also take into account the high-frequency variations, the data favour significantly smaller disk sizes than previous microlensing measurements. In this case, our results are in agreement with the thin disk model prediction only if we assume very low mean masses for the microlens population, i.e. = 0.01 $M_\odot$. Eventually, including the differentially microlensed continuum reverberation by the BLR successfully explains the high frequencies without requiring such low mass microlenses. This allows us to measure, for the first time, the size of the BLR using single-band photometric monitoring, $R_{BLR}$ = $1.6^{+1.5}_{-0.8}\times 10^{17}$cm, in agreement with estimates using the BLR size-luminosity relation.

astro-ph.GA↗

arXiv2021

Using strong lensing to understand the microJy radio emission in two radio quiet quasars at redshift 1.7

The radio quasar luminosity function exhibits an upturn around $L_{6\rm\:GHz}=10^{23}$ W Hz$^{-1}$ that is well-modelled by a star-forming host galaxy population. This distribution leads some authors to cite star formation as the main radio emission mechanism in so-called radio-quiet quasars (RQQs). Understanding the origin of RQQ radio emission is crucial for our understanding of quasar feedback mechanisms -- responsible for the regulation of star-formation in the host galaxy -- and for understanding galaxy evolution as a whole. By observing RQQs that have been magnified by strong gravitational lensing, we have direct access to the RQQ population out to cosmic noon, where evidence for twin mini-jets has recently been found in a sub-\textmu Jy RQQ. Here we present radio observations of two lensed RQQs using the VLA at 5~GHz, the latest objects to be observed in a sample of quadruply-imaged RQQs above -30$^{\circ}$. In SDSS~J1004+4112 we find strong evidence for AGN-related radio emission in the variability of the source. In PG~1115+080 we find tentative evidence for AGN-related emission, determined by comparing the radio luminosity with modelled dust components. If confirmed in the case of PG~1115+080, which lies on the radio--FIR correlation, the result would reinforce the need for caution when applying the correlation to rule out jet activity and when assuming no AGN heating of FIR-emitting dust when calculating star formation rates. Our programme so far has shown that two of the faintest radio sources ever imaged show strong evidence for AGN-dominated radio emission.

astro-ph.GA↗

arXiv2021

HOLISMOKES -- V. Microlensing of type II supernovae and time-delay inference through spectroscopic phase retrieval

We investigate strongly gravitationally lensed type II supernovae (LSNe II) for time-delay cosmography incorporating microlensing effects, which expands on previous microlensing studies of type Ia supernovae (SNe Ia). We use the radiative-transfer code ${\rm \small TARDIS}$ to recreate five spectra of the prototypical SN 1999em at different times within the plateau phase of the light curve. The microlensing-induced deformations of the spectra and light curves are calculated by placing the SN into magnification maps generated with the code ${\rm \small GERLUMPH}$. We study the impact of microlensing on the color curves and find that there is no strong influence on them during the investigated time interval of the plateau phase. The color curves are only weakly affected by microlensing due to the almost achromatic behavior of the intensity profiles. However, the lack of non-linear structure in the color curves makes time-delay measurements difficult given the possible presence of differential dust extinction. Therefore, we further investigate SN phase inference through spectral absorption lines under the influence of microlensing and Gaussian noise. As the spectral features shift to longer wavelengths with progressing time after explosion, the measured wavelength of a specific absorption line provides information on the epoch of the SN. The comparison between retrieved epochs of two observed lensing images then gives the time delay of the images. We find that the phase retrieval method using spectral features yields accurate delays with uncertainties $\small {\lesssim}$2 days, making it a promising approach.

astro-ph.CO↗

arXiv2021

J1721$+$8842: a gravitationally lensed binary quasar with a proximate damped Lyman-$α$ absorber

High-redshift binary quasars provide key insights into mergers and quasar activity, and are useful tools for probing the spatial kinematics and chemistry of galaxies along the line-of-sight. However, only three sub-10-kpc binaries have been confirmed above $z=1$. Gravitational lensing would provide a way to easily resolve such binaries, study them in higher resolution, and provide more sightlines, though the required alignment with a massive foreground galaxy is rare. Through image deconvolution of StanCam Nordic Optical Telescope (NOT) monitoring data, we reveal two further point sources in the known, $z \approx 2.38$, quadruply lensed quasar (quad), J1721+8842. An ALFOSC/NOT long-slit spectrum shows that the brighter of these two sources is a quasar with $z = 2.369 \pm 0.007$ based on the C III] line, while the C III] redshift of the quad is $z = 2.364 \pm 0.003$. Lens modelling using point source positions rules out a single source model, favouring an isothermal lens mass profile with two quasar sources separated by $\sim6.0$ kpc (0.73$^{\prime \prime}$) in projection. Given the resolving ability from lensing and current lensed quasar statistics, this discovery suggests a large population of undiscovered, unlensed sub-10-kpc binaries. We also analyse spectra of two images of the quad, showing narrow Ly$α$ emission within the trough of a proximate damped Ly$α$ absorber (PDLA). An apparent mismatch between the continuum and narrow line flux ratios provides a new potential tool for simultaneously studying microlensing and the quasar host galaxy. Signs of the PDLA are also seen in the second source, however a deeper spectrum is still required to confirm this. Thanks to the multiple lines-of-sight from lensing and two quasar sources, this system offers simultaneous sub-parsec and kpc-scale probes of a PDLA.

astro-ph.GA↗

arXiv2021

Time Delay Lens Modelling Challenge

In recent years, breakthroughs in methods and data have enabled gravitational time delays to emerge as a very powerful tool to measure the Hubble constant $H_0$. However, published state-of-the-art analyses require of order 1 year of expert investigator time and up to a million hours of computing time per system. Furthermore, as precision improves, it is crucial to identify and mitigate systematic uncertainties. With this time delay lens modelling challenge we aim to assess the level of precision and accuracy of the modelling techniques that are currently fast enough to handle of order 50 lenses, via the blind analysis of simulated datasets. The results in Rung 1 and Rung 2 show that methods that use only the point source positions tend to have lower precision ($10 - 20\%$) while remaining accurate. In Rung 2, the methods that exploit the full information of the imaging and kinematic datasets can recover $H_0$ within the target accuracy ($ |A| < 2\%$) and precision ($< 6\%$ per system), even in the presence of poorly known point spread function and complex source morphology. A post-unblinding analysis of Rung 3 showed the numerical precision of the ray-traced cosmological simulations to be insufficient to test lens modelling methodology at the percent level, making the results difficult to interpret. A new challenge with improved simulations is needed to make further progress in the investigation of systematic uncertainties. For completeness, we present the Rung 3 results in an appendix, and use them to discuss various approaches to mitigating against similar subtle data generation effects in future blind challenges.

astro-ph.CO↗

arXiv2021

HOLISMOKES -- III. Achromatic Phase of Strongly Lensed Type Ia Supernovae

To use strongly lensed Type Ia supernovae (LSNe Ia) for cosmology, a time-delay measurement between the multiple supernova (SN) images is necessary. The sharp rise and decline of SN Ia light curves make them promising for measuring time delays, but microlensing can distort these light curves and therefore add large uncertainties to the measurements. An alternative approach is to use color curves where uncertainties due to microlensing are significantly reduced for a certain period of time known as the achromatic phase. In this work, we investigate in detail the achromatic phase, testing four different SN Ia models with various microlensing configurations. We find on average an achromatic phase of around three rest-frame weeks or longer for most color curves but the spread in the duration of the achromatic phase (due to different microlensing maps and filter combinations) is quite large and an achromatic phase of just a few days is also possible. Furthermore, the achromatic phase is longer for smoother microlensing maps, lower macro-magnifications and larger mean Einstein radii of microlenses. From our investigations, we do not find a strong dependency on the model or on asymmetries in the SN ejecta. Further, we find that three independent LSST color curves exhibit features such as extreme points or turning points within the achromatic phase, which make them promising for time-delay measurements. These curves contain combinations of rest-frame bands $u$, $g$, $r$, and $i$ and to observe them for typical LSN Ia redshifts, it would be ideal to cover (observer-frame) filters $r$, $i$, $z$, $y$, $J$, and $H$.

astro-ph.HE↗

arXiv2020

TDCOSMO IV: Hierarchical time-delay cosmography -- joint inference of the Hubble constant and galaxy density profiles

The H0LiCOW collaboration inferred via gravitational lensing time delays a Hubble constant $H_0=73.3^{+1.7}_{-1.8}$ km s$^{-1}{\rm Mpc}^{-1}$, describing deflector mass density profiles by either a power-law or stars plus standard dark matter halos. The mass-sheet transform (MST) that leaves the lensing observables unchanged is considered the dominant source of residual uncertainty in $H_0$. We quantify any potential effect of the MST with flexible mass models that are maximally degenerate with H0. Our calculation is based on a new hierarchical approach in which the MST is only constrained by stellar kinematics. The approach is validated on hydrodynamically simulated lenses. We apply the method to the TDCOSMO sample of 7 lenses (6 from H0LiCOW) and measure $H_0=74.5^{+5.6}_{-6.1}$ km s$^{-1}{\rm Mpc}^{-1}$. In order to further constrain the deflector mass profiles, we then add imaging and spectroscopy for 33 strong gravitational lenses from the SLACS sample. For 9 of the SLAC lenses we use resolved kinematics to constrain the stellar anisotropy. From the joint analysis of the TDCOSMO+SLACS sample, we measure $H_0=67.4^{+4.1}_{-3.2}$ km s$^{-1}{\rm Mpc}^{-1}$, assuming that the TDCOSMO and SLACS galaxies are drawn from the same parent population. The blind H0LiCOW, TDCOSMO-only and TDCOSMO+SLACS analyses are in mutual statistical agreement. The TDCOSMO+SLACS analysis prefers marginally shallower mass profiles than H0LiCOW or TDCOSMO-only. While our new analysis does not statistically invalidate the mass profile assumptions by H0LiCOW, and thus their $H_0$ measurement relying on those, it demonstrates the importance of understanding the mass density profile of elliptical galaxies. The uncertainties on $H_0$ derived in this paper can be reduced by physical or observational priors on the form of the mass profile, or by additional data, chiefly spatially resolved kinematics of lens galaxies.

astro-ph.CO↗

arXiv2020

Gaia GraL: Gaia DR2 Gravitational Lens Systems. VI. Spectroscopic Confirmation and Modeling of Quadruply-Imaged Lensed Quasars

Combining the exquisite angular resolution of Gaia with optical light curves and WISE photometry, the Gaia Gravitational Lenses group (GraL) uses machine learning techniques to identify candidate strongly lensed quasars, and has confirmed over two dozen new strongly lensed quasars from the Gaia Data Release 2. This paper reports on the 12 quadruply-imaged quasars identified by this effort to date, which is approximately a 20% increase in the total number of confirmed quadruply-imaged quasars. We discuss the candidate selection, spectroscopic follow-up, and lens modeling. We also report our spectroscopic failures as an aid for future investigations.

astro-ph.GA↗

arXiv2020

HOLISMOKES -- I. Highly Optimised Lensing Investigations of Supernovae, Microlensing Objects, and Kinematics of Ellipticals and Spirals

We present the HOLISMOKES programme on strong gravitational lensing of supernovae as a probe of supernova (SN) physics and cosmology. We investigate the effects of microlensing on early-phase SN Ia spectra using four different SN explosion models, and find that within 10 rest-frame days after SN explosion, distortions of SN Ia spectra due to microlensing are typically negligible ($<$1% distortion within the 1$σ$ spread, and $\lesssim$10% distortion within the 2$σ$ spread). This shows great prospects of using lensed SNe Ia to obtain intrinsic early-phase SN spectra for deciphering SN Ia progenitors. As a demonstration of the usefulness of lensed SNe Ia for cosmology, we simulate a sample of mock lensed SN Ia systems that are expected to have accurate and precise time-delay measurements in the era of the Rubin Observatory Legacy Survey of Space and Time (LSST). Adopting realistic yet conservative uncertainties on their time-delay distances and lens angular diameter distances (of 6.6% and 5%, respectively), we find that a sample of 20 lensed SNe Ia would allow a constraint on the Hubble constant ($H_0$) with 1.3% uncertainty in the flat $Λ$CDM cosmology. We find a similar constraint on $H_0$ in an open $Λ$CDM cosmology, while the constraint degrades to $3\%$ in a flat $w$CDM cosmology. We anticipate lensed SNe to be an independent and powerful probe of SN physics and cosmology in the upcoming LSST era.

astro-ph.CO↗

arXiv2020

TDCOSMO II: 6 new time delays in lensed quasars from high-cadence monitoring at the MPIA 2.2m telescope

We present six new time-delay measurements obtained from $R_c$-band monitoring data acquired at the Max Planck Institute for Astrophysics (MPIA) 2.2 m telescope at La Silla observatory between October 2016 and February 2020. The lensed quasars HE 0047-1756, WG 0214-2105, DES 0407-5006, 2M 1134-2103, PSJ 1606-2333 and DES 2325-5229 were observed almost daily at high signal-to-noise ratio to obtain high-quality light curves where we can record fast and small-amplitude variations of the quasars. We measured time delays between all pairs of multiple images with only one or two seasons of monitoring with the exception of the time delays relative to image D of PSJ 1606-2333. The most precise estimate was obtained for the delay between image A and image B of DES 0407-5006, where $τ_{AB} = -128.4^{+3.5}_{-3.8}$ d (2.8% precision) including systematics due to extrinsic variability in the light curves. For HE 0047-1756, we combined our high-cadence data with measurements from decade-long light curves from previous COSMOGRAIL campaigns, and reach a precision of 0.9 d on the final measurement. The present work demonstrates the feasibility of measuring time delays in lensed quasars in only one or two seasons, provided high signal-to-noise ratio data are obtained at a cadence close to daily.

astro-ph.CO↗

arXiv2020

VLA and ALMA observations of the lensed radio-quiet quasar SDSS J0924+0219: a molecular structure in a 3 microJy radio source

We present Karl G. Jansky Very Large Array (VLA) and Atacama Large Millimetre Array (ALMA) observations of SDSS J0924+0219, a z = 1.524 radio-quiet lensed quasar with an intrinsic radio flux density of about 3 micro-Jy. The four lensed images are clearly detected in the radio continuum and the CO(5-4) line, whose centroid is at z = 1.5254 +/- 0.0001, with a marginal detection in the submillimetre continuum. The molecular gas displays ordered motion, in a structure approximately 1--2.5 kpc in physical extent, with typical velocities of 50-100 km/s. Our results are consistent with the radio emission being emitted from the same region, but not with a point source of radio emission. SDSS J0924+0219 shows an extreme anomaly in the flux ratios of the two merging images in the optical continuum and broad emission lines, suggesting the influence of microlensing by stars in the lensing galaxy. We find the flux ratio in the radio, submillimetre continuum and CO lines to be slightly greater than 1 but much less than that in the optical, which can be reproduced with a smooth galaxy mass model and an extended source. Our results, supported by a microlensing simulation, suggest that the most likely explanation for the optical flux anomaly is indeed microlensing.

astro-ph.GA↗

arXiv2020

COSMOGRAIL XIX: Time delays in 18 strongly lensed quasars from 15 years of optical monitoring

We present the results of 15 years of monitoring lensed quasars, which was conducted by the COSMOGRAIL programme at the Leonhard Euler 1.2m Swiss Telescope. The decade-long light curves of 23 lensed systems are presented for the first time. We complement our data set with other monitoring data available in the literature to measure the time delays in 18 systems, among which nine reach a relative precision better than 15% for at least one time delay. To achieve this, we developed an automated version of the curve-shifting toolbox PyCS to ensure robust estimation of the time delay in the presence of microlensing, while accounting for the errors due to the imperfect representation of microlensing. We also re-analysed the previously published time delays of RX J1131$-$1231 and HE 0435$-$1223, by adding six and two new seasons of monitoring, respectively, and confirming the previous time-delay measurements. When the time delay measurement is possible, we corrected the light curves of the lensed images from their time delay and present the difference curves to highlight the microlensing signal contained in the data. To date, this is the largest sample of decade-long lens monitoring data, which is useful to measure $H_0$ and the size of quasar accretion discs with microlensing as well as to study quasar variability.

astro-ph.CO↗

arXiv2020

TDCOSMO. I. An exploration of systematic uncertainties in the inference of $H_0$ from time-delay cosmography

Time-delay cosmography of lensed quasars has achieved 2.4% precision on the measurement of the Hubble constant, $H_0$. As part of an ongoing effort to uncover and control systematic uncertainties, we investigate three potential sources: 1- stellar kinematics, 2- line-of-sight effects, and 3- the deflector mass model. To meet this goal in a quantitative way, we reproduced the H0LiCOW/SHARP/STRIDES (hereafter TDCOSMO) procedures on a set of real and simulated data, and we find the following. First, stellar kinematics cannot be a dominant source of error or bias since we find that a systematic change of 10% of measured velocity dispersion leads to only a 0.7% shift on $H_0$ from the seven lenses analyzed by TDCOSMO. Second, we find no bias to arise from incorrect estimation of the line-of-sight effects. Third, we show that elliptical composite (stars + dark matter halo), power-law, and cored power-law mass profiles have the flexibility to yield a broad range in $H_0$ values. However, the TDCOSMO procedures that model the data with both composite and power-law mass profiles are informative. If the models agree, as we observe in real systems owing to the "bulge-halo" conspiracy, $H_0$ is recovered precisely and accurately by both models. If the two models disagree, as in the case of some pathological models illustrated here, the TDCOSMO procedure either discriminates between them through the goodness of fit, or it accounts for the discrepancy in the final error bars provided by the analysis. This conclusion is consistent with a reanalysis of six of the TDCOSMO (real) lenses: the composite model yields $74.0^{+1.7}_{-1.8}$ $km.s^{-1}.Mpc^{-1}$, while the power-law model yields $H_0=74.2^{+1.6}_{-1.6}$ $km.s^{-1}.Mpc^{-1}$. In conclusion, we find no evidence of bias or errors larger than the current statistical uncertainties reported by TDCOSMO.

astro-ph.CO↗

arXiv2020

H0LiCOW XI. A weak lensing measurement of the external convergence in the field of the lensed quasar B1608+656 using HST and Subaru deep imaging

We investigate the environment and line of sight of the H0LiCOW lens B1608+656 using Subaru Suprime-Cam and the Hubble Space Telescope (HST) to perform a weak lensing analysis. We compare three different methods to reconstruct the mass map of the field, i.e. the standard Kaiser-Squires inversion coupled with inpainting and Gaussian or wavelet filtering, and $\tt{Glimpse}$ a method based on sparse regularization of the shear field. We find no substantial difference between the 2D mass reconstructions, but we find that the ground-based data is less sensitive to small-scale structures than the space-based observations. Marginalising over the results obtained with all the reconstruction techniques applied to the two available HST filters F606W and F814W, we estimate the external convergence, $κ_{\rm ext}$ at the position of B1608+656 is $κ_{\rm ext} = 0.11^{+0.06}_{-0.04}$, where the error bars corresponds respectively to the 16th and 84th quartiles. This result is compatible with previous estimates using the number-counts technique, suggesting that B1608+656 resides in an over-dense line of sight, but with a completely different technique. Using our mass reconstructions, we also compare the convergence at the position of several groups of galaxies in the field of B1608+656 with the mass measurements using various analytical mass profiles, and find that the weak lensing results favor truncated halo models.

astro-ph.GA↗