arXiv subjects

D. T. C. Allcock

Publications and source records attributed to D. T. C. Allcock.

30 records · Page 2Linked to original sources

arXiv2017

High-fidelity spatial and polarization addressing of Ca-43 qubits using near-field microwave control

Individual addressing of qubits is essential for scalable quantum computation. Spatial addressing allows unlimited numbers of qubits to share the same frequency, whilst enabling arbitrary parallel operations. We demonstrate addressing of long-lived $^{43}\text{Ca}^+$ "atomic clock" qubits held in separate zones ($960μ$m apart) of a microfabricated surface trap with integrated microwave electrodes. Such zones could form part of a "quantum CCD" architecture for a large-scale quantum information processor. By coherently cancelling the microwave field in one zone we measure a ratio of Rabi frequencies between addressed and non-addressed qubits of up to 1400, from which we calculate a spin-flip probability on the qubit transition of the non-addressed ion of $1.3\times 10^{-6}$. Off-resonant excitation then becomes the dominant error process, at around $5 \times 10^{-3}$. It can be prevented either by working at higher magnetic field, or by polarization control of the microwave field. We implement polarization control with error $2 \times 10^{-5}$, which would suffice to suppress off-resonant excitation to the $\sim 10^{-9}$ level if combined with spatial addressing. Such polarization control could also enable fast microwave operations.

quant-ph↗

arXiv2016

High-fidelity trapped-ion quantum logic using near-field microwaves

We demonstrate a two-qubit logic gate driven by near-field microwaves in a room-temperature microfabricated ion trap. We measure a gate fidelity of 99.7(1)\%, which is above the minimum threshold required for fault-tolerant quantum computing. The gate is applied directly to $^{43}$Ca$^+$ "atomic clock" qubits (coherence time $T_2^*\approx 50\,\mathrm{s}$) using the microwave magnetic field gradient produced by a trap electrode. We introduce a dynamically-decoupled gate method, which stabilizes the qubits against fluctuating a.c.\ Zeeman shifts and avoids the need to null the microwave field.

quant-ph↗

arXiv2015

Hybrid quantum logic and a test of Bell's inequality using two different atomic isotopes

Entanglement is one of the most fundamental properties of quantum mechanics, and is the key resource for quantum information processing. Bipartite entangled states of identical particles have been generated and studied in several experiments, and post-selected or heralded entangled states involving pairs of photons, single photons and single atoms, or different nuclei in the solid state, have also been produced. Here, we use a deterministic quantum logic gate to generate a "hybrid" entangled state of two trapped-ion qubits held in different isotopes of calcium, perform full tomography of the state produced, and make a test of Bell's inequality with non-identical atoms. We use a laser-driven two-qubit gate, whose mechanism is insensitive to the qubits' energy splittings, to produce a maximally-entangled state of one Ca-40 qubit and one Ca-43 qubit, held 3.5 microns apart in the same ion trap, with 99.8(6)% fidelity. We test the Clauser-Horne-Shimony-Holt (CHSH) version of Bell's inequality for this novel entangled state and find that it is violated by 15 standard deviations; in this test, we close the detection loophole but not the locality loophole. Mixed-species quantum logic is a powerful technique for the construction of a quantum computer based on trapped ions, as it allows protection of memory qubits while other qubits undergo logic operations, or are used as photonic interfaces to other processing units. The entangling gate mechanism used here can also be applied to qubits stored in different atomic elements; this would allow both memory and logic gate errors due to photon scattering to be reduced below the levels required for fault-tolerant quantum error correction, which is an essential pre-requisite for general-purpose quantum computing.

quant-ph↗

arXiv2015

Dark-resonance Doppler cooling and high fluorescence in trapped Ca-43 ions at intermediate magnetic field

We demonstrate simple and robust methods for Doppler cooling and obtaining high fluorescence from trapped 43Ca+ ions at a magnetic field of 146 Gauss. This field gives access to a magnetic-field-independent "atomic clock" qubit transition within the ground level hyperfine structure of the ion, but also causes the complex internal structure of the 64 states relevant to Doppler cooling to be spread over many times the atomic transition line-width. Using a time-dependent optical Bloch equation simulation of the system we develop a simple scheme to Doppler-cool the ion on a two-photon dark resonance, which is robust to typical experimental variations in laser intensities, detunings and polarizations. We experimentally demonstrate cooling to a temperature of 0.3 mK, slightly below the Doppler limit for the corresponding two-level system, and then use Raman sideband laser cooling to cool further to the ground states of the ion's radial motional modes. These methods will enable two-qubit entangling gates with this ion, which is one of the most promising qubits so far developed.

quant-ph↗

arXiv2014

High-fidelity preparation, gates, memory and readout of a trapped-ion quantum bit

We implement all single-qubit operations with fidelities significantly above the minimum threshold required for fault-tolerant quantum computing, using a trapped-ion qubit stored in hyperfine "atomic clock" states of $^{43}$Ca$^+$. We measure a combined qubit state preparation and single-shot readout fidelity of 99.93%, a memory coherence time of $T^*_2=50$ seconds, and an average single-qubit gate fidelity of 99.9999%. These results are achieved in a room-temperature microfabricated surface trap, without the use of magnetic field shielding or dynamic decoupling techniques to overcome technical noise.

quant-ph↗

arXiv2014

Ion-trap electrode preparation with Ne$^+$ bombardment

We describe an ex-situ surface-cleaning procedure that is shown to reduce motional heating from ion-trap electrodes. This precleaning treatment, to be implemented immediately before the final assembly and vacuum processing of ion traps, removes surface contaminants remaining after the electrode-fabrication process. We incorporate a multi-angle ion-bombardment treatment intended to clean the electrode surfaces and interelectrode gaps of microfabricated traps. This procedure helps to minimize redeposition in the gaps between electrodes that can cause electrical shorts. We report heating rates in a stylus-type ion trap prepared in this way that are lower by one order of magnitude compared to a similar untreated stylus-type trap using the same experimental setup.

physics.atom-ph↗

arXiv2013

Experimental recovery of a qubit from partial collapse

We describe and implement a method to restore the state of a single qubit, in principle perfectly, after it has partially collapsed. The method resembles the classical Hahn spin-echo, but works on a wider class of relaxation processes, in which the quantum state partially leaves the computational Hilbert space. It is not guaranteed to work every time, but successful outcomes are heralded. We demonstrate using a single trapped ion better performance from this recovery method than can be obtained employing projection and post-selection alone. The demonstration features a novel qubit implementation that permits both partial collapse and coherent manipulations with high fidelity.

quant-ph↗

arXiv2013

Microwave control electrodes for scalable, parallel, single-qubit operations in a surface-electrode ion trap

We propose a surface ion trap design incorporating microwave control electrodes for near-field single-qubit control. The electrodes are arranged so as to provide arbitrary frequency, amplitude and polarization control of the microwave field in one trap zone, while a similar set of electrodes is used to null the residual microwave field in a neighbouring zone. The geometry is chosen to reduce the residual field to the 0.5% level without nulling fields; with nulling, the crosstalk may be kept close to the 0.01% level for realistic microwave amplitude and phase drift. Using standard photolithography and electroplating techniques, we have fabricated a proof-of-principle electrode array with two trapping zones. We discuss requirements for the microwave drive system and prospects for scalability to a large two-dimensional trap array.

quant-ph↗

arXiv2012

A microfabricated ion trap with integrated microwave circuitry

We describe the design, fabrication and testing of a surface-electrode ion trap, which incorporates microwave waveguides, resonators and coupling elements for the manipulation of trapped ion qubits using near-field microwaves. The trap is optimised to give a large microwave field gradient to allow state-dependent manipulation of the ions' motional degrees of freedom, the key to multiqubit entanglement. The microwave field near the centre of the trap is characterised by driving hyperfine transitions in a single laser-cooled 43Ca+ ion.

physics.atom-ph↗

arXiv2012

Background-free detection of trapped ions

We demonstrate a Doppler cooling and detection scheme for ions with low-lying D levels which almost entirely suppresses scattered laser light background, while retaining a high fluorescence signal and efficient cooling. We cool a single ion with a laser on the 2S1/2 to 2P1/2 transition as usual, but repump via the 2P3/2 level. By filtering out light on the cooling transition and detecting only the fluorescence from the 2P_3/2 to 2S1/2 decays, we suppress the scattered laser light background count rate to 1 per second while maintaining a signal of 29000 per second with moderate saturation of the cooling transition. This scheme will be particularly useful for experiments where ions are trapped in close proximity to surfaces, such as the trap electrodes in microfabricated ion traps, which leads to high background scatter from the cooling beam.

physics.atom-ph↗

arXiv2011

Heating rate and electrode charging measurements in a scalable, microfabricated, surface-electrode ion trap

We characterise the performance of a surface-electrode ion "chip" trap fabricated using established semiconductor integrated circuit and micro-electro-mechanical-system (MEMS) microfabrication processes which are in principle scalable to much larger ion trap arrays, as proposed for implementing ion trap quantum information processing. We measure rf ion micromotion parallel and perpendicular to the plane of the trap electrodes, and find that on-package capacitors reduce this to <~ 10 nm in amplitude. We also measure ion trapping lifetime, charging effects due to laser light incident on the trap electrodes, and the heating rate for a single trapped ion. The performance of this trap is found to be comparable with others of the same size scale.

quant-ph↗

arXiv2009

Implementation of a symmetric surface electrode ion trap with field compensation using a modulated Raman effect

We describe the fabrication and characterization of a new surface-electrode Paul ion trap designed for experiments in scalable quantum information processing with Ca+. A notable feature is a symmetric electrode pattern which allows rotation of the normal modes of ion motion, yielding efficient Doppler cooling with a single beam parallel to the planar surface. We propose and implement a technique for micromotion compensation in all directions using an infrared repumper laser beam directed into the trap plane. Finally, we employ an alternate repumping scheme that increases ion fluorescence and simplifies heating rate measurements obtained by time-resolved ion fluorescence during Doppler cooling.

quant-ph↗