Searcharxiv⌕ Search

arXiv subjects

Daan Frenkel

Publications and source records attributed to Daan Frenkel.

At least 55 records · Page 3Linked to original sources

Non-equilibrium simulations of thermally induced electric fields in water

Using non-equilibrium molecular dynamics simulations, it has been recently demonstrated that water molecules align in response to an imposed temperature gradient, resulting in an effective electric field. Here, we investigate how thermally induced fields depend on the underlying treatment of long-ranged interactions. For the short-ranged Wolf method and Ewald summation, we find the peak strength of the field to range between $2 \times 10^7$ and $5 \times 10^7~\text{V/m}$ for a temperature gradient of $5.2~\text{K/}\unicode{x212B}$. Our value for the Wolf method is therefore an order of magnitude lower than the literature value [J. Chem. Phys. 139, 014504 (2013) and 143, 036101 (2015)]. We show that this discrepancy can be traced back to the use of an incorrect kernel in the calculation of the electrostatic field. More seriously, we find that the Wolf method fails to predict correct molecular orientations, resulting in dipole densities with opposite sign to those computed using Ewald summation. By considering two different multipole expansions, we show that, for inhomogeneous polarisations, the quadrupole contribution can be significant and even outweigh the dipole contribution to the field. Finally, we propose a more accurate way of calculating the electrostatic potential and the field. In particular, we show that averaging the microscopic field analytically to obtain the macroscopic Maxwell field reduces the error bars by up to an order of magnitude. As a consequence, the simulation times required to reach a given statistical accuracy decrease by up to two orders of magnitude.

physics.comp-ph↗

Nanoparticle ordering in sandwiched polymer brushes

The organization of nano-particles inside grafted polymer layers is governed by the interplay of polymer-induced entropic interactions and the action of externally applied fields. Earlier work had shown that strong external forces can drive the formation of colloidal structures in polymer brushes. Here we show that external fields are not essential to obtain such colloidal patterns: we report Monte Carlo and Molecular dynamics simulations that demonstrate that ordered structures can be achieved by compressing a `sandwich' of two grafted polymer layers, or by squeezing a coated nanotube, with nano-particles in between. We show that the pattern formation can be efficiently controlled by the applied pressure, while the characteristic length--scale, i.e. the typical width of the patterns, is sensitive to the length of the polymers. Based on the results of the simulations, we derive an approximate equation of state for nano-sandwiches.

cond-mat.soft↗

DNA brick self-assembly with an off-lattice potential

We report Monte Carlo simulations of a simple off-lattice patchy-particle model for DNA `bricks'. We relate the parameters that characterise this model with the binding free energy of pairs of single-stranded DNA molecules. We verify that an off-lattice potential parameterised in this way reproduces much of the behaviour seen with a simpler lattice model we introduced previously, although the relaxation of the geometric constraints leads to a more error-prone self-assembly pathway. We investigate the self-assembly process as a function of the strength of the non-specific interactions. We show that our off-lattice model for DNA bricks results in robust self-assembly into a variety of target structures.

cond-mat.soft↗

Switch-like surface binding of competing multivalent particles

Multivalent particles competing for binding on the same surface can exhibit switch-like behaviour, depending on the concentration of receptors on the surface. When the receptor concentration is low, energy dominates the free energy of binding, and particles having a small number of strongly-binding ligands preferentially bind to the surface. At higher receptor concentrations, multivalent effects become significant, and entropy dominates the binding free energy; particles having many weakly-binding ligands preferentially bind to the surface. Between these two regimes there is a "switch-point", at which the surface binds the two species of particles equally strongly. We demonstrate that a simple theory can account for this switch-like behaviour and present numerical calculations that support the theoretical predictions. We argue that binding selectivity based on receptor density, rather than identity, may have practical applications.

cond-mat.soft↗

Hot nano-particles in polar or paramagnetic liquids interact as monopoles

When neutral nano-particles are heated or cooled in a polar liquid, they will interact with each other as if they carry an electrostatic charge that is proportional to the temperature difference between the particle and the surrounding fluid. The same should hold for paramagnetic liquids, in which case the nano-particles should behave as magnetic monopoles. However, the analogy with electrostatics/magnetostatics is not complete: heated/cooled nano-particles do not move under the influence of an applied field. They should, however, interact as monopoles.

cond-mat.soft↗

Simple approach for calculating the binding free energy of a multivalent particle

We present a simple yet accurate numerical approach to compute the free energy of binding of multivalent objects on a receptor-coated surface. The method correctly accounts for the fact that one ligand can bind to at most one receptor. The numerical approach is based on a saddle-point approximation to the computation of a complex residue. We compare our theory with the powerful Valence-Limited Interaction Theory (VLIT) (J. Chem. Phys. 137, 094108(2012), J. Chem. Phys. 138, 021102(2013)) and find excellent agreement in the regime where that theory is expected to work. However, the present approach even works for low receptor/ligand densities, where VLIT breaks down.

cond-mat.soft↗

Oligomers of heat-shock proteins: Structures that don't imply function

Most proteins must remain soluble in the cytosol in order to perform their biological functions. To protect against undesired protein aggregation, living cells maintain a population of molecular chaperones that ensure the solubility of the proteome. Here we report simulations of a lattice model of interacting proteins to understand how low concentrations of passive molecular chaperones, such as small heat-shock proteins, suppress thermodynamic instabilities in protein solutions. Given fixed concentrations of chaperones and client proteins, the solubility of the proteome can be increased by tuning the chaperone--client binding strength. Surprisingly, we find that the binding strength that optimizes solubility while preventing irreversible chaperone binding also promotes the formation of weakly bound chaperone oligomers, although the presence of these oligomers does not significantly affect the thermodynamic stability of the solution. Such oligomers are commonly observed in experiments on small heat-shock proteins, but their connection to the biological function of these chaperones has remained unclear. Our simulations suggest that this clustering may not have any essential biological function, but rather emerges as a natural side-effect of optimizing the thermodynamic stability of the proteome.

physics.bio-ph↗

Theory and Simulation of DNA-Coated Colloids: a Guide for Rational Design

By exploiting the exquisite selectivity of DNA hybridization, DNA-Coated Colloids (DNACCs) can be made to self-assemble in a wide variety of structures. The beauty of this system stems largely from its exceptional versatility and from the fact that a proper choice of the grafted DNA sequences yields fine control over the colloidal interactions. Theory and simulations have an important role to play in the optimal design of self- assembling DNACCs. At present, the powerful model-based design tools are not widely used, because the theoretical literature is fragmented and the connection between different theories is often not evident. In this Perspective, we aim to discuss the similarities and differences between the different models that have been described in the literature, their underlying assumptions, their strengths and their weaknesses. Using the tools described in the present Review, it should be possible to move towards a more rational design of novel self-assembling structures of DNACCs and, more generally, of systems where ligand-receptors bonds are used to control interactions.

cond-mat.soft↗

Turning intractable counting into sampling: computing the configurational entropy of three-dimensional jammed packings

We report a numerical calculation of the total number of disordered jammed configurations $Ω$ of $N$ repulsive, three-dimensional spheres in a fixed volume $V$. To make these calculations tractable, we increase the computational efficiency of the approach of Xu et al. (Phys. Rev. Lett. 106, 245502 (2011)) and Asenjo et al. (Phys. Rev. Lett. 112, 098002 (2014)) and we extend the method to allow computation of the configurational entropy as a function of pressure. The approach that we use computes the configurational entropy by sampling the absolute volume of basins of attraction of the stable packings in the potential energy landscape. We find a surprisingly strong correlation between the pressure of a configuration and the volume of its basin of attraction in the potential energy landscape. This relation is well described by a power law. Our methodology to compute the number of minima in the potential energy landscape should be applicable to a wide range of other enumeration problems in statistical physics, string theory, cosmology and machine learning, that aim to find the distribution of the extrema of a scalar cost function that depends on many degrees of freedom.

cond-mat.stat-mech↗

Evidence for non-ergodicity in quiescent states of periodically sheared suspensions

We present simulations of an equilibrium statistical-mechanics model that uniformly samples the space of quiescent states of a periodically sheared suspension. In our simulations, we compute the structural properties of this model as a function of density. We compare the results of our simulations with the structural data obtained in the corresponding non-equilibrium model of Corté et al. [Nat. Phys. 4, 420 (2008)]. We find that the structural properties of the non-equilibrium model are very different from those of the equilibrium model, even though the two models have exactly the same set of accessible states. This observation shows that the dynamical protocol does not sample all quiescent states with equal probability. In particular, we find that, whilst quiescent states prepared in a non-equilibrium protocol can be hyperuniform [see Phys. Rev. Lett. 114, 110602 (2015), Phys. Rev. Lett. 114, 148301 (2015), and Phys. Rev. Lett. 115, 108301 (2015)], ergodic sampling never leads to hyperuniformity. In addition, we observe ordering phase transitions and a percolation transition in the equilibrium model that do not show up in the non-equilibrium model. Conversely, the quiescent-to-diffusive transition in the dynamical model does not correspond to a phase transition, nor a percolation transition, in the equilibrium model.

cond-mat.stat-mech↗

Consistent treatment of hydrophobicity in protein lattice models accounts for cold denaturation

The hydrophobic effect stabilizes the native structure of proteins by minimizing the unfavourable interactions between hydrophobic residues and water through the formation of a hydrophobic core. Here we include the entropic and enthalpic contributions of the hydrophobic effect explicitly in an implicit solvent model. This allows us to capture two important effects: a length-scale dependence and a temperature dependence for the solvation of a hydrophobic particle. This consistent treatment of the hydrophobic effect explains cold denaturation and heat capacity measurements of solvated proteins.

cond-mat.soft↗

Effects of co-ordination number on the nucleation behaviour in many-component self-assembly

We report canonical and grand-canonical lattice Monte Carlo simulations of the self-assembly of addressable structures comprising hundreds of distinct component types. The nucleation behaviour, in the form of free-energy barriers to nucleation, changes significantly as the co-ordination number of the building blocks is changed from 4 to 8 to 12. Unlike tetrahedral structures - which roughly correspond to DNA bricks that have been studied in experiment - the shapes of the free-energy barriers of higher co-ordination structures depend strongly on the supersaturation, and such structures require a very significant driving force for structure growth before nucleation becomes thermally accessible. Although growth at high supersaturation results in more defects during self-assembly, we show that high co-ordination number structures can still be assembled successfully in computer simulations and that they exhibit self-assembly behaviour analogous to DNA bricks. In particular, the self-assembly remains modular, enabling in principle a wide variety of nanostructures to be assembled, with a greater spatial resolution than is possible in low co-ordination structures.

cond-mat.soft↗

Rational design of self-assembly pathways for complex multicomponent structures

The field of complex self-assembly is moving toward the design of multi-particle structures consisting of thousands of distinct building blocks. To exploit the potential benefits of structures with such `addressable complexity,' we need to understand the factors that optimize the yield and the kinetics of self-assembly. Here we use a simple theoretical method to explain the key features responsible for the unexpected success of DNA-brick experiments, which are currently the only demonstration of reliable self-assembly with such a large number of components. Simulations confirm that our theory accurately predicts the narrow temperature window in which error-free assembly can occur. Even more strikingly, our theory predicts that correct assembly of the complete structure may require a time-dependent experimental protocol. Furthermore, we predict that low coordination numbers result in non-classical nucleation behavior, which we find to be essential for achieving optimal nucleation kinetics under mild growth conditions. We also show that, rather surprisingly, the use of heterogeneous bond energies improves the nucleation kinetics and in fact appears to be necessary for assembling certain intricate three-dimensional structures. This observation makes it possible to sculpt nucleation pathways by tuning the distribution of interaction strengths. These insights not only suggest how to improve the design of structures based on DNA bricks, but also point the way toward the creation of a much wider class of chemical or colloidal structures with addressable complexity.

cond-mat.soft↗

Theoretical prediction of free-energy landscapes for complex self-assembly

We present a technique for calculating free-energy profiles for the nucleation of multicomponent structures that contain as many species as building blocks. We find that a key factor is the topology of the graph describing the connectivity of the target assembly. By considering the designed interactions separately from weaker, incidental interactions, our approach yields predictions for the equilibrium yield and nucleation barriers. These predictions are in good agreement with corresponding Monte Carlo simulations. We show that a few fundamental properties of the connectivity graph determine the most prominent features of the assembly thermodynamics. Surprisingly, we find that polydispersity in the strengths of the designed interactions stabilizes intermediate structures and can be used to sculpt the free-energy landscape for self-assembly. Finally, we demonstrate that weak incidental interactions can preclude assembly at equilibrium due to the combinatorial possibilities for incorrect association.

cond-mat.soft↗

Lattice simulation method to model diffusion and NMR spectra in porous materials

A coarse-grained simulation method to predict NMR spectra of ions diffusing in porous carbons is proposed. The coarse-grained model uses input from molecular dynamics simulations such as the free-energy profile for ionic adsorption, and density-functional theory calculations are used to predict the NMR chemical shift of the diffusing ions. The approach is used to compute NMR spectra of ions in slit pores with pore widths ranging from 2 to 10 nm. As diffusion inside pores is fast, the NMR spectrum of an ion trapped in a single mesopore will be a sharp peak with a pore size dependent chemical shift. To account for the experimentally observed NMR line shapes, our simulations must model the relatively slow exchange between different pores. We show that the computed NMR line shapes depend on both the pore size distribution and the spatial arrangement of the pores. The technique presented in this work provides a tool to extract information about the spatial distribution of pore sizes from NMR spectra. Such information is diffcult to obtain from other characterisation techniques.

cond-mat.mtrl-sci↗

Crucial role of non-specific interactions in amyloid nucleation

Protein oligomers have been implicated as toxic agents in a wide range of amyloid-related diseases. Yet it has remained unsolved whether the oligomers are a necessary step in the formation of amyloid fibrils, or just a dangerous by-product. Analogously, it has not been resolved if the amyloid nucleation process is a classical one-step nucleation process, or a two-step process involving pre-nucleation clusters. We use coarse-grained computer simulations to study the effect of non-specific attractions between peptides on the primary nucleation process underlying amyloid fibrillization. We find that for peptides that do not attract, the classical one-step nucleation mechanism is possible, but only at non-physiologically high peptide concentrations. At low peptide concentrations, which mimic the physiologically relevant regime, attractive inter-peptide interactions are essential for fibril formation. Nucleation then inevitably takes place through a two-step mechanism involving prefibrillar oligomers. We show that oligomers not only help peptides meet each other, but create an environment that facilitates the conversion of monomers into the $β$-sheet rich form characteristic of fibrils. Nucleation typically does not proceed via the most prevalent oligomers, but via an oligomer size that is only observed in rare fluctuations, which is why such aggregates might be hard to capture experimentally. Finally, we find that the nucleation of amyloid fibrils cannot be described by classical nucleation theory: in the two-step mechanism the critical nucleus size increases both with an increase in concentration and in the inter-peptide interactions, in direct contrast with predictions from classical nucleation theory.

q-bio.BM↗

Mobile linkers on DNA-coated colloids: valency without patches

Colloids coated with single-stranded DNA (ssDNA) can bind selectively to other colloids coated with complementary ssDNA. The fact that DNA-coated colloids (DNACCs) can bind to specific partners opens the prospect of making colloidal `molecules'. However, in order to design DNACC-based molecules, we must be able to control the valency of the colloids, i.e. the number of partners to which a given DNACC can bind. One obvious, but not very simple approach is to decorate the colloidal surface with patches of single-stranded DNA that selectively bind those on other colloids. Here we propose a design principle that exploits many-body effects to control the valency of otherwise isotropic colloids. Using a combination of theory and simulation, we show that we can tune the valency of colloids coated with mobile ssDNA, simply by tuning the non-specific repulsion between the particles. Our simulations show that the resulting effective interactions lead to low-valency colloids self-assembling in peculiar open structures, very different from those observed in DNACCs with immobile DNA linkers.

cond-mat.soft↗

Gibbs, Boltzmann, and negative temperatures

In a recent paper, Dunkel and Hilbert [Nature Physics 10, 67-72 (2014)] use an entropy definition due to Gibbs to provide a 'consistent thermostatistics' which forbids negative absolute temperatures. Here we argue that the Gibbs entropy fails to satisfy a basic requirement of thermodynamics, namely that when two bodies are in thermal equilibrium, they should be at the same temperature. The entropy definition due to Boltzmann does meet this test, and moreover in the thermodynamic limit can be shown to satisfy Dunkel and Hilbert's consistency criterion. Thus, far from being forbidden, negative temperatures are inevitable, in systems with bounded energy spectra.

cond-mat.stat-mech↗