arXiv subjects

Daiki Hatanaka

Publications and source records attributed to Daiki Hatanaka.

At least 19 recordsLinked to original sources

arXiv2026

Phase control of magnon-phonon coupling via magnetic field

We study the phase of the coupling between magnons and surface acoustic wave (SAW) phonons in magnetic thin films. The coupling constant changes from a real to a complex number as the external magnetic field is reduced. Below a transition field, the imaginary coupling constant allows SAW phonons to couple to overdamped magnons whose resonance frequency is close to zero and far from the SAW resonance. The strength of the imaginary coupling constant and the magnitude of the transition field both scale with magnetic damping. We find the coupling produces a broad, pronounced minimum in the SAW transmittance spectrum near zero magnetic field in a Ni/Ru/Ni synthetic antiferromagnet with large magnetic damping. These results demonstrate that the phase of the complex magnon-phonon coupling constant can be tuned via magnetic field in strongly damped magnets, offering a platform to explore novel regimes of magnon-phonon interactions.

cond-mat.mes-hall↗

arXiv2026

Nonreciprocal phonon propagation via spatially asymmetric magnon-phonon coupling

Nonreciprocal propagation of surface acoustic waves (SAWs) based on the spatial asymmetry of magnon-phonon coupling is demonstrated. This nonreciprocity is enabled by an acoustic wavelength scale thick magnetic layer formed under a thin piezoelectric film. In this configuration, magnon modes activated by dipole-dipole interactions are localized near either the top or bottom interface depending on the propagation direction of the SAW. As a result, the spatial overlap between interfacial magnon and surface phonon modes is expected to become direction dependent, in a manner that leads to distinct unidirectional propagation of SAWs. Notably, the resulting nonreciprocity reaches the highest level among those reported for SAW devices based on a single magnetic layer. This finding will establish a new strategy of nonreciprocal acoustic propagation in a structurally simple magnomechanical device.

cond-mat.mes-hall↗

arXiv2026

Magnetoelastic Waves in Ferromagnetic Thin Films Mediated by Dipolar Interactions

Magnetoelastic coupling mediated by magnetic dipolar interactions is theoretically investigated in ferromagnetic thin films under an in-plane magnetic field. We develop a theoretical description that incorporates dipolar fields derived from Maxwell's equations in the presence of elastic deformations. The resulting coupled equations of motion predict hybridization between magnetostatic and Lamb waves. Numerical calculations for a yttrium iron garnet (YIG) film reveal anti-crossings in the dispersion relations, with hybridization gaps ranging from $0.1$ to several MHz.

cond-mat.mtrl-sci↗

arXiv2025

On-chip magnon polaron generation in mode-matched cavity magnomechanics

Generation of magnon polarons, which are hybridized states resulting from strong magnon-phonon coupling, is a key to enabling coherent manipulation in acoustic and spintronic devices. However, the conventional device configuration, a magnetic thin film on a thick piezoelectric layer, often has difficulty achieving a large magnon-phonon coupling due to a very small spatial mode overlap. Here, we demonstrate generation of magnon polarons by using a mode-matched on-chip magnomechanical system. A configuration with a thin piezoelectric film on a magnetic layer several micrometers thick was found to sustain deeply distributed magnon modes that enable magnetoelastic coupling to phonons over almost the entire mode volume. The enhanced spatial mode overlap generated magnon polarons whose spectra showed distinct avoided crossing. This magnomechanical system will facilitate utilization of coherent magnon-phonon conversion and their hybrid states in functional phononic devices.

cond-mat.mes-hall↗

arXiv2023

Magnon-phonon coupling of synthetic antiferromagnets in a surface acoustic wave cavity resonator

We use a surface acoustic wave (SAW) cavity resonator to study the coupling of acoustic magnons in a synthetic antiferromagnet (SAF) and the phonons carried by SAWs. The SAF is composed of a CoFeB/Ru/CoFeB trilayer and the scattering matrix of the SAW resonator is studied to assess the coupling. We find that the spectral linewidth of the SAW resonator is modulated when the frequency of the excited magnons approaches the SAW resonance frequency. Moreover, the linewidth modulation varies with the magnitude and orientation of the external magnetic field. Such change in the spectral linewidth can be well reproduced using macrospin-like model calculations. From the model analyses, we estimate the magnon-phonon coupling strength to be $\sim$15.6 MHz at a SAW resonance frequency of 1.8 GHz: the corresponding magnomechanical cooperativity is $\sim$0.66. As the spectral shape hardly changes in a CoFeB single layer reference sample under the same experimental condition, these results show that SAF provides an ideal platform to study magnon-phonon coupling in a SAW cavity resonator.

cond-mat.mes-hall↗

arXiv2023

Cavity magnomechanical coupling with coupled magnon modes in a synthetic antiferromagnet

On-chip cavity magnomechanics is an emerging field exploring acoustic and magnonic functionalities of various ferromagnetic materials and structures using strongly confined phonons. It is expected that such cavity magnomechanics can be extended to multilayer ferromagnets, especially synthetic antiferromagnets (SAFs) that exhibit zero net magnetization through interlayer exchange coupling. However, the conventional theoretical framework for a single ferromagnet cannot be used directly because of the antiferromagnetic magnetization dynamics associated with the interlayer exchange coupling. In this paper, we theoretically investigate phonon-magnon coupling with a three-layer SAF. Our formulation of the phonon-magnon coupling constants reveals that the acoustic (optical) magnon mode dominantly couples to the cavity phonon when the magnetization angles in the two ferromagnetic layers are antiparallel (orthogonal). Moreover, numerical calculations including the effects of dipole-dipole interactions and in-plane uniaxial magnetic anisotropy allow us to predict phonon frequency shifts and linewidth broadening that can be detected in experiments. These theoretical insights would greatly help us to make a strategy for bringing the system into the strong coupling regime and to devise novel control protocols in analogy to cavity quantum electrodynamics and cavity optomechanics.

cond-mat.mes-hall↗

arXiv2023

Evanescently coupled topological ring-waveguide systems for chip-scale ultrahigh frequency phononic circuits

Topological phononics enabling backscattering-immune transport is expected to improve the performance of electromechanical systems for classical and quantum information technologies. Nonetheless, most of the previous demonstrations utilized macroscale and low-frequency structures and thus offered little experimental insight into ultrahigh frequency phonon transport, especially in chip-scale circuits. Here, we report microwave phonon transmissions in a microscopic topological ring-waveguide coupled system, which is an important building block for wave-based signal processing. The elastic waves in the topological waveguide evanescently couple to the ring resonator, while maintaining the valley pseudospin polarization. The resultant waves are robust to backscattering even in the tiny hexagonal ring, generating a resonant phonon circulation. Furthermore, the evanescently coupled structure allows for a critical coupling, where valley-dependent ring-waveguide interference enables blocking of the topological edge transmission. Our demonstrations reveal the capability of using topological phenomena to manipulate ultrahigh frequency elastic waves in intricate phononic circuits for classical and quantum signal-processing applications.

cond-mat.mes-hall↗

arXiv2023

Quadrature skyrmions in two-dimensionally arrayed parametric resonators

Skyrmions are topological solitons in two-dimensional systems and have been observed in various physical systems. Generating and controlling skyrmions in artificial resonator arrays lead to novel acoustic, photonic, and electric devices, but it is a challenge to implement a vector variable with the chiral exchange interaction. Here, we propose to use quadrature variables, where their parametric coupling enables skyrmions to be stabilized. A finite-element simulation indicates that a acoustic skyrmion would exist in a realistic structure consisting of a piezoelectric membrane array.

cond-mat.mes-hall↗

arXiv2023

Impedance-matched High-overtone Bulk Acoustic Resonator

A high-overtone bulk acoustic resonator (HBAR), in which a piezoelectric transducer is set on an acoustic cavity, has been attracting attention in both fundamental research and RF applications due to its scalability, high frequency, and high quality factor. The acoustic impedance matching in HBARs is crucial for efficient acoustic power transfer from the piezoelectric transducer to the cavity. However, impedance mismatch remains in most HBARs due to the metal layer insertion between the piezoelectric layer and cavity substrate. In this study, we fabricated a nearly impedance-matched high-quality HBAR using an epitaxial AlN piezoelectric layer directly grown on a conductive SiC cavity substrate with no metal layer insertion. The small impedance mismatch was verified from the variation in the free spectral range (FSR), which is comparable to the best value in previously reported HBARs. The experimentally obtained FSR spectra was greatly reproduced by using the Mason model. Broadband phonon cavity modes up to the K-band (26.5 GHz) were achieved by reducing the thickness of the AlN layer from 800 to 200 nm. The high figure of merit of $f\times\text{Q} \sim 1.3\times 10^{13}\ \textrm{Hz}$ at 10 GHz was also obtained. Our nearly impedance-matched high-quality HBAR will enable the development of RF applications, such as low-phase noise oscillators and acoustic filters, as well as research on high-frequency acoustic systems hybridized with electric, optical, and magnetic systems.

cond-mat.mes-hall↗

arXiv2022

Phononic-crystal cavity magnomechanics

Establishing a way to control magnetic dynamics and elementary excitations (magnons) is crucial to fundamental physics and the search for novel phenomena and functions in magnetic solid-state systems. Electromagnetic waves have been developed as means of driving and sensing in magnonic and spintronics devices used in magnetic spectroscopy, non-volatile memory, and information processors. However, their millimeter-scale wavelengths and undesired cross-talk have limited operation efficiency and made individual control of densely integrated magnetic systems difficult. Here, we utilize acoustic waves (phonons) to control magnetic dynamics in a miniaturized phononic crystal micro-cavity and waveguide architecture. We demonstrate acoustic pumping of localized ferromagnetic magnons, where their back-action allows dynamic and mode-dependent modulation of phononic cavity resonances. The phononic crystal platform enables spatial driving, control and read-out of tiny magnetic states and provides a means of tuning acoustic vibrations with magnons. This alternative technology enhances the usefulness of magnons and phonons for advanced sensing, communications and computation architectures that perform transduction, processing, and storage of classical and quantum information.

cond-mat.mes-hall↗

arXiv2021

Buckling-induced quadratic nonlinearity in silicon phonon waveguide structures

We fabricated and characterized a single-crystal silicon phonon waveguide structure with lead zirconate titanate (PZT) piezoelectric transducers. The compressive stress in a silicon-on-insulator wafer causes a membrane waveguide to buckle, leading to the quadratic nonlinearity. The PZT transducer integrated in an on-chip configuration enables us to excite high-intensity mechanical vibration, which allows the characterization of nonlinear behavior. We observed a softening nonlinear response as a function of the drive power and demonstrated the mode shift and frequency conversion. This is the first report of the nonlinear behavior caused by the quadratic nonlinearity in a buckled phonon waveguide structure. This study provides a method to control the sign and the order of nonlinearity in a phonon waveguide by utilizing the internal stress, which allows the precise manipulation of elastic waves in phononic integrated circuits.

cond-mat.mes-hall↗

arXiv2019

Real-space characterization of cavity-coupled waveguide systems in hypersonic phononic crystals

A phononic crystal formed in a suspended membrane provides full confinement of hypersonic waves and thus realizes a range of chip-scale manipulations. In this letter, we demonstrate the mode-resolved real-space characterization of the mechanical vibration properties in cavities and waveguide systems. Multiple resonant modes are independently characterized in various designed cavities, and wavelength-scale high-$Q$ resonances up to $Q=$ 4200 under atmospheric conditions are confirmed. This also reveals that the waveguide allows us to resolve single-mode wave transmission and thereby drive evanescently-coupled cavities. The methods offer a significant tool with which to build compact and low-power microwave phononic circuitry for signal processing and hybrid quantum system applications.

physics.app-ph↗

arXiv2019

Acoustic Kerr nonlinearity of wave propagation in a planar nanoelectromechanical waveguide

Nonlinearity is the key to introducing novel concepts in various technologies utilizing traveling waves. In contrast to the field of optics, where highly functional devices have been developed using optical Kerr nonlinearity, such a nonlinear effect in acoustic devices has yet to be fully exploited. Here, we show that most fundamental nonlinear phenomena of self-phase modulation (SPM), cross-phase modulation (XPM) and four-wave mixing (FWM) caused by the acoustic Kerr effect are quantitatively characterized using a newly developed platform consisting of a planar nanoelectromechanical waveguide (NEMW). Combining the cutting-edge technology of a high crystalline quality NEMW with a piezoelectric interdigital transducer (IDT), we efficiently excite an intense and long-lived traveling wave sufficiently to induce and characterize acoustic nonlinearity. The observed nonlinear phenomena are precisely described by the model using the nonlinear Schrödinger (NLS) equation, so that this architecture enables the nonlinear dynamics to be perfectly tailored. The flexible and integratable platform extends the ability to manipulate acoustic wave propagation on a chip, thus offering the potential to develop highly functional devices and study novel nonlinear acoustics.

cond-mat.mes-hall↗

arXiv2019

Modal Analysis Investigation of Mechanical Kerr Frequency Combs

The aim of this work is to theoretically investigate the possibility of Kerr frequency combs in mechanical systems. In particular, whether microelectrome-chanical devices (MEMS) can be used to generate frequency combs in a manner that is analogous to the optical frequency combs generated in optical microresona-tors with Kerr-type nonlinearity. The analysis assumes a beam-like micromechani-cal structure, and starting from the Euler-Bernoulli beam equation derives the nec-essary conditions in parameter space for the comb generation. The chapter equally presents potential means for the physical implementation of mechanical Kerr combs.

cond-mat.mes-hall↗

arXiv2018

Electrostatically induced phononic crystal

The possibility of realizing an electrostatically induced phononic crystal is investigated numerically in an acoustic waveguide based on a graphene sheet that is suspended over periodically arrayed electrodes. The application of dc voltage to these electrodes exerts electrostatic force on the graphene and this results in the periodic formation of stress in the waveguide structure in a non-invasive way, unlike the cases with mass loading and air holes. This non-invasive scheme enables a bandgap, namely a phononic crystal, to be created in the waveguide that can be used to dynamically tune the acoustic transparency in the medium. Our approach will allow the dispersion relation to be locally modified, thus modulating the temporal response of traveling acoustic phonon waves. This novel phonon architecture is promising in terms of realizing the advanced control of phonon dynamics such as waveform and dissipation engineering in the device.

cond-mat.mes-hall↗

arXiv2017

On-chip phononic time lens

The ability to manipulate phonon waveforms in continuous media has attracted significant research interest and is crucial for practical applications ranging from biological imaging to material characterization. Although several spatial focusing techniques have been developed, these systems require sophisticated artificial structures, which limit their practical applications. This is because the spatial control of acoustic phonon waves is not as straightforward as photonics so there is a strong demand for an alternative approach. Here we demonstrate a phononic time lens in a dispersive one-dimensional phononic crystal waveguide, which enables the temporal control of phonon wave propagation. Pulse focusing is realized at a desired time and position with chirped input pulses that agree perfectly with the theoretical prediction. This technique can be applied to arbitrary systems and will offer both an improvement in time and spatial sensing resolution and allow the creation of a highly intense strain field, enabling the investigation of novel nonlinear phononic phenomena such as phononic solitons and rogue waves.

cond-mat.mes-hall↗

arXiv2016

Broadband reconfigurable logic gates in phonon waveguides

The high-quality-factor mechanical resonator in electromechanical systems has facilitated dynamic control of phonons via parametric nonlinear processes and paved the development of mechanical logic-elements. However the resonating element with a narrow bandwidth limits the resultant operation speeds as well as constraining the availability of nonlinear phenomena to a narrow spectral range. To overcome these drawbacks we have developed phonon waveguides in which the mechanical analogue of four-wave-mixing is demonstrated that enables the frequency of phonon waves to be converted over 1 MHz. We harness this platform to execute multiple binary mechanical logic gates in parallel, via frequency division multiplexing in a two-octave-wide phonon transmission band, where each gate can be independently reconfigured. The fidelity of the binary gates is verified via temporal measurements yielding eye diagrams which confirm the availability of high speed logic operations. The phonon waveguide architecture thus offers the broadband functionality that is essential to realising mechanical signal processors.

cond-mat.mes-hall↗

arXiv2015

Phonon propagation dynamics in band-engineered one-dimensional phononic crystal waveguides

The phonon propagation dynamics in a phononic crystal waveguide, realized via a suspended one-dimensional membrane array with periodic air holes, is investigated as function of its geometry. The bandstructure of the phononic crystal can be engineered by modifying the characteristics of the phonon standing waves in the waveguide by varying the waveguide width and the pitch of the air holes. This enables the phonon transmission bands, the bandgaps, the velocity and the nonlinear dispersion in the phononic crystal to be controlled. Indeed the engineered bandstructure can also be tuned to sustain multiple phonon modes in a given branch which whilst being spectrally degenerate can be temporally resolved via their differing group velocities. This systematic study reveals the key geometric parameters that enable the phonon transport in phononic crystal waveguides to be fully controlled.

cond-mat.mes-hall↗