arXiv subjects

Daiki Tanabe

Publications and source records attributed to Daiki Tanabe.

16 recordsLinked to original sources

arXiv2026

Estimation of systematic error from bulk deformation of end test mass induced by photon calibrator for LIGO post-O5 gravitational wave projects

We studied the bulk deformation of the end test masses (ETMs) of gravitational wave (GW) detectors caused by calibration devices named Photon Calibrator (Pcal). This bulk deformation is one of the source of calibration error since it induces non-linear displacement from the ideal pendulum motion of the ETM. Particularly, it is the dominant error source above 1500 Hz which is crucial to the studies of neutron star mergers. The displacement also depends on beam offsets of the main interferometer (IFO) beam and Pcal beams. We conceptually described frequency dependent effect of bulk deformation and evaluated it in several cases of the beam offset with finite-element analysis (FEA) software, for ETM models of Advanced LIGO (aLIGO), KAGRA, Advanced Virgo (AdVirgo), and LIGO A#.

astro-ph.IM↗

arXiv2026

Noise reduction in suspension control with photon-pressure actuator for CHRONOS gravitational wave detector

Improving sub-Hz sensitivity of gravitational wave (GW) detectors is important to detect heavier binary black hole mergers and study phenomena in stronger gravity fields. Torsion-bar-based GW detectors have been projected to focus on low-frequency GW. Among noise sources of GW detector, actuation noise induced by vibration of force sources and fluctuation of environmental magnetic fields is one that increases in low frequency. In this study, we propose photon-pressure actuator as a solution to isolate an actuator from seismic and magnetic noise. It can also be used as a photon calibrator. We designed an optical layout of the photon-pressure actuator having four beams independently controlled and applied it to CHRONOS experiment. Based on a realistic power control system, we estimated its maximum torque amplitude around yaw rotation axis as $1.0\times 10^{-8}$ N$\cdot$m and actuation efficiency as $6.6\times 10^{-13}$ rad/V, which are sufficiently large for controlling the CHRONOS torsion bar. The actuation noise was estimated as $5.3\times 10^{-19}$ rad ${\rm Hz}^{-1/2}$ at 1 Hz, lower than the target sensitivity of CHRONOS. Assuming its usage as a photon calibrator, the estimated systematic error was 1.14%.

astro-ph.IM↗

arXiv2026

Prospects for Observing Gravity-gradient Noise and Earthquake Gravity Signals with CHRONOS

Ground-based gravitational-wave detectors operating in the sub-Hertz regime are expected to be strongly limited by environmental gravity-gradient fluctuations, commonly referred to as Newtonian Noise (NN). At the same time, this frequency band provides unique opportunities to probe terrestrial gravitational perturbations associated with seismic and atmospheric processes. In this work, we investigate the feasibility of using the proposed Cryogenic sub-Hz cROss torsion-bar detector with quantum NOn-demolition speed meter (CHRONOS) as a platform for studying gravity-gradient noise and detecting prompt gravitational signals from earthquakes. We model gravity-gradient contributions from Rayleigh-wave-induced seismic fields, atmospheric infrasound fluctuations, and transient mass redistribution during earthquakes, and project these onto the CHRONOS torsion-bar response. CHRONOS achieves a peak strain sensitivity of order ~1e-18 Hz^(-1/2) near ~2 Hz. Rayleigh-wave NN is found to be the dominant environmental contribution below approximately 0.5 Hz, while atmospheric NN remains several orders of magnitude smaller throughout the frequency range considered. We further assess the detectability of prompt gravitational signals from earthquakes. For a representative Mw = 5.2 event, sources within approximately 90 km may produce detectable signals. At 40 km distance, we obtain a signal-to-noise ratio (SNR) of approximately 3.62 integrated over the sub-Hz band, with a corresponding strain amplitude reaching the CHRONOS sensitivity curve around 0.2 to 0.6 Hz. The gravitational signal is expected to precede seismic P-wave arrival by several seconds, depending on the assumed propagation velocity. These results demonstrate the potential of CHRONOS to probe both gravity-gradient noise and transient geophysical gravity signals in the sub-Hertz regime.

physics.ins-det↗

arXiv2026

Probing Yukawa Gravity with Modulated Newtonian Cancellation in the CHRONOS Detector

We investigate the sensitivity of a torsion-bar gravitational-wave detector to Yukawa-type deviations from Newtonian gravity using a differential gravitational calibrator (GCal), where two rotating mass systems cancel the leading Newtonian torque. We derive an exact expression for the residual torque and map the Yukawa signal into a strain-equivalent response in the sub-Hz band. We evaluate the sensitivity in the $(\alpha_Y,\lambda)$ parameter space, finding optimal performance at scales comparable to the experimental geometry, reaching $|\alpha_Y| = 2.4\times10^{-5}$ at $\lambda = 8\mathrm{m}$. The sensitivity is limited by residual Newtonian torque from imperfect cancellation rather than statistical noise, with a systematic floor reached at $T_{\rm eq} \simeq 9.25\times10^{4}\mathrm{s}$ ($\sim 26$ hours). This limit is dominated by uncertainties in the source-mass geometry. The differential configuration retains sensitivity even at large interaction ranges, enabling constraints at meter-scale distances. These results establish torsion-bar detectors as a systematics-limited probe of non-Newtonian gravity in the sub-Hz band.

gr-qc↗

arXiv2026

Instrumental development for Cryogenic sub-Hz cROss torsion bar detector with quantum NOn-demolition Speed meter (CHRONOS)

Gravitational waves from intermediate-mass black-hole (IMBH) binaries is a probe of strong-field gravity and black-hole evolution. Detection of IMBH is challenging because of their typically low frequency where the seismic noise, radiation pressure noise, and thermal noise dominate. The Cryogenic sub-Hz cROss torsion bar detector with quantum NOn-demolition Speed meter (CHRONOS) has been proposed to reach a strain sensitivity of $10^{-18} {\rm Hz}^{-1/2}$ at 2 Hz. It aims to detect GW from IMBH mergers with the mass of $\mathcal{O}(10^4)$ M$_{\odot}$ and to explore stochastic gravitational background of $\Omega_{\rm GW} \sim 2\times 10^{-3}$ at 2 Hz. We present the overview of the CHRONOS hardware which is designed to integrate key techniques for improving low frequency sensitivity; torsion bar, speed meter, and cryogenic mirror. As a demonstration of the interferometer operation, we also report the commissioning status of a Michelson interferometer in National Central University in Taiwan which has been assembled as a partial component of CHRONOS.

astro-ph.IM↗

arXiv2026

Noise budget of Cryogenic sub-Hz cROss torsion bar detector with quantum NOn-demolition Speed meter (CHRONOS)

CHRONOS is a proposed gravitational-wave detector designed to operate in the sub-Hz frequency range (0.1 to 10 Hz), a largely unexplored band due to strong noise sources that hamper ground-based detectors. It employs cryogenic operation, a cross torsion-bar configuration, a triangular Sagnac interferometer, and a speed meter readout scheme to overcome key noise limitations, targeting a strain sensitivity of $h \sim 10^{-18} Hz^{-1/2}$ around 2 Hz and a stochastic gravitational wave background of $\Omega_{GW}$ approximately $2 \times 10^{-3}$ at 2 Hz. Using analytical and interferometric simulations with FINESSE3, we evaluate the noise budget of CHRONOS and characterize the relative contributions of quantum, thermal, and environmental noise sources. Our results demonstrate that CHRONOS achieves competitive sensitivity at low frequencies. The feasibility of using CHRONOS in an earthquake early-warning system by detecting prompt gravity-gradient signals is also investigated, and is predicted to be faster by approximately 2.92 to 6.90 seconds within 40 km. These findings highlight the scientific potential of CHRONOS, bridging gravitational-wave astronomy and geophysical monitoring, and motivating further development of low-frequency detector technologies.

physics.ins-det↗

arXiv2026

Science of Cryogenic sub-Hz cROss torsion bar detector with quantum NOn-demolition Speed meter (CHRONOS)

The frequency band between $0.1$ and $10\mathrm{Hz}$ remains largely unexplored in gravitational-wave astronomy due to strong seismic, Newtonian, and suspension thermal noise that limit ground-based detectors. The Cryogenic sub-Hz cROss torsion-bar detector with quantum NOn-demolition Speed meter (CHRONOS) is a novel detector concept designed to access this frequency range from the ground. CHRONOS combines cryogenic torsion-bar test masses with a triangular Sagnac interferometer implementing a speed-meter readout, which suppresses quantum radiation-pressure noise and enables quantum non-demolition measurements in the sub-Hz regime. The detector targets a strain sensitivity of $h \sim 10^{-18}\mathrm{Hz^{-1/2}}$ around $2\mathrm{Hz}$ and stochastic gravitational wave background of $\Omega_{GW} \sim 2\times 10^{-3}$ at $2\mathrm{Hz}$. This sensitivity opens a new observational window between space-based detectors such as LISA and ground-based interferometers, enabling observations of intermediate-mass black hole binaries, searches for stochastic gravitational-wave backgrounds, and tests of macroscopic quantum measurements.

astro-ph.IM↗

arXiv2026

CHRONOS Science Program

Cryogenic sub-Hz cROss torsion-bar detector with quantum NOn-demolition Speed meter(CHRONOS) is a proposed next-generation ground-based gravitational-wave observatory designed to explore the sub-Hz frequency band with unprecedented sensitivity. Utilizing a cryogenic torsion-bar interferometric configuration with quantum non-demolition speed-meter readout, CHRONOS targets a frequency window that bridges space-based missions and current high-frequency ground-based detectors, opening a new frontier in gravitational-wave astronomy. The observatory will enable long-duration tracking of compact binary inspirals well before merger, significantly improving source localization, parameter estimation, and tests of general relativity. In addition to transient signals, CHRONOS is optimized to probe the stochastic gravitational-wave background (SGWB) in the sub-Hz regime, providing powerful constraints on primordial gravitational waves, inflationary tensor spectra with red or blue tilts, first-order phase transitions, cosmic strings, and other relics of high-energy physics. By connecting gravitational-wave measurements across cosmological frequency scales-from cosmic microwave background polarization to pulsar timing arrays and high-frequency interferometers-CHRONOS will contribute to a coherent reconstruction of the gravitational-wave spectrum over more than twenty orders of magnitude. Crossing critical sensitivity thresholds in the sub-Hz band, CHRONOS will establish a new pillar of gravitational-wave astronomy and cosmology, enabling transformative advances in astrophysics and fundamental physics.

astro-ph.IM↗

arXiv2026

Improving calibration accuracy with torque coupled gravity field calibrator for sub-Hz gravitational wave observation in CHRONOS

A fundamental challenge in low-frequency gravitational-wave detectors is the limited signal-to-noise ratio (SNR) of calibration lines, particularly in torsion-bar systems where the response is governed by rotational dynamics. In this work, we resolve this issue by optimizing the geometrical configuration of a torque-coupled gravity field calibrator (GCal), achieving an improvement in calibration-line SNR by more than an order of magnitude compared to conventional layouts. For the Cryogenic sub-Hz cROss torsion-bar detector with quantum NOn-demolition Speed-meter (CHRONOS), the calibration signal appears as a monochromatic line within the $0.1$--$10~\mathrm{Hz}$ band. At $1~\mathrm{Hz}$, the strain-equivalent calibration amplitude reaches $|h_{\rm GCal}| = 1.16 \times 10^{-14}$, corresponding to an SNR density of $|h_{\rm GCal}|/S_h = 4.16 \times 10^{3}$. This demonstrates for the first time that a high-SNR calibration line can be directly injected into the sub-Hz band of a torsion-bar detector. A first-order perturbative error propagation analysis yields a total fractional systematic uncertainty of $\delta h_{\rm GCal}/h_{\rm GCal} = 0.24\%$, dominated by geometric alignment uncertainties, while contributions from mass uncertainties and the gravitational constant remain subdominant. The corresponding absolute systematic uncertainty is $\delta h_{\rm GCal} \sim 10^{-17}$ at $1~\mathrm{Hz}$. These results establish torque-coupled gravitational calibration as a practical solution to the longstanding low-SNR problem in sub-Hz torsion-bar detectors and provide a robust pathway toward precision absolute calibration in the low-frequency regime.

gr-qc↗

arXiv2025

Torque cancellation effect of Intensity noise for Cryogenic sub-Hz cROss torsion bar detector with quantum NOn-demolition Speed meter (CHRONOS)

Detection of sub-Hz gravitational waves is of significant importance for astrophysics. It enables the observation of intermediate-mass black hole mergers, the issuance of early alerts for gravitational-wave events, and the exploration of the stochastic gravitational-wave background. The Cryogenic sub-Hz cROss torsion-bar detector with quantum NOn-demolition Speed meter (CHRONOS) is a proposed gravitational-wave detector based on a Sagnac speed-meter topology that uses torsion bars as test masses. Its prototype design aims to achieve a strain sensitivity of $3 \times 10^{-18}~\mathrm{Hz}^{-1/2}$ at 1~Hz and thus enable the detection of $\mathcal{O}(10^4),M_\odot$ intermediate-mass black hole mergers at 100~Mpc with a signal-to-noise ratio of 3. We show that the torsion-bar-based speed meter can suppress noise originating from laser intensity fluctuations by canceling the net torque on the bar and by using a balanced homodyne readout. We further present, for the first time, an analytic intensity-noise model for a gravitational-wave detector employing a torsion-bar Sagnac speed-meter configuration. Using this model, we evaluate the expected performance of a 2.5~m arm-length CHRONOS prototype. The projected laser-intensity noise is $2.9 \times 10^{-20}~\mathrm{Hz}^{-1/2}$ at 1~Hz, which is sufficiently low to allow the detection of binary intermediate-mass black hole mergers.

physics.ins-det↗

arXiv2025

Cryogenic sub-Hz cROss torsion bar detector with quantum NOn-demolition Speed meter (CHRONOS) for gravitational wave detection

We present the optical design and sensitivity modeling of the Cryogenic sub-Hz cROss torsion-bar detector with quantum NOn-demolition Speed meter (CHRONOS), a triangular Sagnac speed-meter interferometer incorporating power and signal recycling. Using ABCD-matrix analysis and \textsc{Finesse3} simulations, we obtain stable optical eigenmodes with mode-matching efficiencies above 99.5%. The optimized configuration achieves a quantum-noise-limited strain sensitivity of $h \simeq 3\times10^{-18},\mathrm{Hz^{-1/2}}$ at 1 Hz, with a ring-cavity finesse of $\mathcal{F}\simeq3.1\times10^{4}$ and a round-trip Gouy phase of $\psi\approx153^{\circ}$. The low-frequency quantum noise is primarily governed by the power-recycling cavity detuning, while the signal-recycling cavity produces an approximately uniform quadrature rotation. An optimal homodyne angle of $\zeta\simeq46^{\circ}$ provides the best sensitivity near 1 Hz. Assuming an end-mirror reflectivity of $R_{\mathrm{ETM}}=99.9999%$ at 10 K, CHRONOS can achieve quantum-noise-limited performance on a laboratory scale. Its projected science reach includes intermediate-mass black-hole binaries out to approximately $271,\mathrm{Mpc}$, a 10-year stochastic-background sensitivity of $\Omega_{\mathrm{GW}}\simeq4.7\times10^{-4}$ at $2.15,\mathrm{Hz}$, constraints on Yukawa-type deviations from Newtonian gravity, and prompt gravity-gradient signals from nearby earthquakes.

physics.ins-det↗

arXiv2025

CHRONOS: Cryogenic sub-Hz cROss torsion bar detector with quantum NOn-demolition Speed meter

We propose a next-generation ground-based gravitational-wave detector, Cryogenic sub-Hz cROss torsion-bar detector with quantum NOn-demolition Speed meter (CHRONOS), optimized for the unexplored $0.1$-$10\,\mathrm{Hz}$ band between the space-based LISA and future ground-based detectors such as Cosmic Explorer and the Einstein Telescope. CHRONOS combines a ring-cavity Sagnac interferometer with torsion-bar test masses to realize the first quantum nondemolition (QND) measurement of angular momentum in a macroscopic system. By implementing a speed-meter readout in the rotational degree of freedom, CHRONOS coherently cancels quantum radiation-pressure noise and enables sub-Hz observations. We calculate, for the first time, that detuned power-recycling and cavity-length optimization can simultaneously relax technical requirements on both torsion bars and speed meters. Assuming a realistic optical design with 1m torsion bar, we estimate strain sensitivities of $h \simeq 5\times10^{-19}\,\mathrm{Hz^{-1/2}}$ at $2\,\mathrm{Hz}$ for detectors with arm lengths of $2.5$ m, $40$ m, and $300$ m. These sensitivities enable (i) direct detection of intermediate-mass black hole binaries up to 340\,Mpc with SNR=3, (ii) probing SGWB down to $\Omega_{\mathrm{GW}}\sim\ 3\times10^{-4}$ at 0.2 Hz with 5 year accumulation. Furthermore, CHRONOS enable to prompt detection of gravity-gradient signals from M 5.5 earthquakes even with a $2.5$ m prototype. CHRONOS thus opens new opportunities for quantum-limited geophysical observation and multi-band, multi-messenger gravitational-wave astronomy.

astro-ph.IM↗

arXiv2022

High-precision temperature monitoring system for room-temperature equipment in astrophysical observations

We present a precise thermometry system to monitor room-temperature components of a telescope for radio-astronomy such as cosmic microwave background (CMB) observation. The system realizes precision of 1 mK${\rm \sqrt{s}}$ on a timescale of 20 seconds at 300 K. We achieved this high precision by tracking only relative fluctuation and combining thermistors with a low-noise measurement device. We show the required precision of temperature monitors for CMB observation and introduce the performance of our thermometry system. This precise room-temperature monitoring system enables us to reduce the low-frequency noise in a wide range of radio-astronomical detector signals observation and to operate a large detector array perform at its designed high sensitivity.

astro-ph.IM↗

arXiv2019

Measurement of the Cosmic Microwave Background Polarization Lensing Power Spectrum from Two Years of POLARBEAR Data

We present a measurement of the gravitational lensing deflection power spectrum reconstructed with two seasons cosmic microwave background polarization data from the POLARBEAR experiment. Observations were taken at 150 GHz from 2012 to 2014 which survey three patches of sky totaling 30 square degrees. We test the consistency of the lensing spectrum with a Cold Dark Matter (CDM) cosmology and reject the no-lensing hypothesis at a confidence of 10.9 sigma including statistical and systematic uncertainties. We observe a value of A_L = 1.33 +/- 0.32 (statistical) +/- 0.02 (systematic) +/- 0.07 (foreground) using all polarization lensing estimators, which corresponds to a 24% accurate measurement of the lensing amplitude. Compared to the analysis of the first year data, we have improved the breadth of both the suite of null tests and the error terms included in the estimation of systematic contamination.

astro-ph.CO↗

arXiv2019

Evidence for the Cross-correlation between Cosmic Microwave Background Polarization Lensing from POLARBEAR and Cosmic Shear from Subaru Hyper Suprime-Cam

We present the first measurement of cross-correlation between the lensing potential, reconstructed from cosmic microwave background (CMB) {\it polarization} data, and the cosmic shear field from galaxy shapes. This measurement is made using data from the POLARBEAR CMB experiment and the Subaru Hyper Suprime-Cam (HSC) survey. By analyzing an 11~deg$^2$ overlapping region, we reject the null hypothesis at 3.5$\sigma$\ and constrain the amplitude of the {\bf cross-spectrum} to $\widehat{A}_{\rm lens}=1.70\pm 0.48$, where $\widehat{A}_{\rm lens}$ is the amplitude normalized with respect to the Planck~2018{} prediction, based on the flat $\Lambda$ cold dark matter cosmology. The first measurement of this {\bf cross-spectrum} without relying on CMB temperature measurements is possible due to the deep POLARBEAR map with a noise level of ${\sim}$6\,$\mu$K-arcmin, as well as the deep HSC data with a high galaxy number density of $n_g=23\,{\rm arcmin^{-2}}$. We present a detailed study of the systematics budget to show that residual systematics in our results are negligibly small, which demonstrates the future potential of this cross-correlation technique.

astro-ph.CO↗

arXiv2018

Measurements of tropospheric ice clouds with a ground-based CMB polarization experiment, POLARBEAR

The polarization of the atmosphere has been a long-standing concern for ground-based experiments targeting cosmic microwave background (CMB) polarization. Ice crystals in upper tropospheric clouds scatter thermal radiation from the ground and produce a horizontally-polarized signal. We report the detailed analysis of the cloud signal using a ground-based CMB experiment, POLARBEAR, located at the Atacama desert in Chile and observing at 150 GHz. We observe horizontally-polarized temporal increases of low-frequency fluctuations ("polarized bursts," hereafter) of $\lesssim$0.1 K when clouds appear in a webcam monitoring the telescope and the sky. The hypothesis of no correlation between polarized bursts and clouds is rejected with $>$24$σ$ statistical significance using three years of data. We consider many other possibilities including instrumental and environmental effects, and find no other reasons other than clouds that can explain the data better. We also discuss the impact of the cloud polarization on future ground-based CMB polarization experiments.

astro-ph.IM↗