Searcharxiv⌕ Search

arXiv subjects

Daisuke Iwai

Publications and source records attributed to Daisuke Iwai.

At least 19 recordsLinked to original sources
arXiv2026

Breaking the Scalability Limit of Multi-Projector Calibration with Embedded Cameras

Conventional multi-projector calibration requires projecting and capturing structured light patterns for each projector sequentially, causing calibration time and effort to increase linearly with the number of projectors. This scalability bottleneck has long limited the deployment of large-scale projection mapping systems. We present a new calibration framework that breaks this limitation by embedding cameras into the surface of the calibration target. The embedded cameras directly capture the incoming projection light, enabling the separation of simultaneously projected structured light patterns from multiple projectors according to their incident directions. Our method establishes correspondences between the optical centers of the embedded cameras and the projector pixels, allowing the intrinsic and extrinsic parameters of all projectors to be simultaneously estimated. We further introduce a correction technique for small misalignments between the calibration board and camera optical centers. As a result, our system achieves calibration accuracy comparable to conventional methods while reducing the required number of projection-capture cycles from linear to nearly constant with respect to the number of projectors, dramatically improving scalability for dense multi-projector systems with overlapping projection regions, such as high-brightness stacking, super-resolution, light-field, and shadow-suppression displays.

cs.CV↗
arXiv2026

Shadowless Projection Mapping for Tabletop Workspaces with Synthetic Aperture Projector

Projection mapping (PM) enables augmented reality (AR) experiences without requiring users to wear head-mounted displays and supports multi-user interaction. It is regarded as a promising technology for a variety of applications in which users interact with content superimposed onto augmented objects in tabletop workspaces, including remote collaboration, healthcare, industrial design, urban planning, artwork creation, and office work. However, conventional PM systems often suffer from projection shadows when users occlude the light path. Prior approaches employing multiple distributed projectors can compensate for occlusion, but suffer from latency due to computational processing, degrading the user experience. In this research, we introduce a synthetic-aperture PM system that uses a significantly larger number of projectors, arranged densely in the environment, to achieve delay-free, shadowless projection for tabletop workspaces without requiring computational compensation. To address spatial resolution degradation caused by subpixel misalignment among overlaid projections, we develop and validate an offline blur compensation method whose computation time remains independent of the number of projectors. Furthermore, we demonstrate that our shadowless PM plays a critical role in achieving a fundamental goal of PM: altering material properties without evoking projection-like impression. Specifically, we define this perceptual impression as ``sense of projection (SoP)'' and establish a PM design framework to minimize the SoP based on user studies.

cs.HC↗
arXiv2026

High-Contrast Projection Mapping under Light Field Illumination with LED Display and Aperiodic Lens Array

Projection Mapping (PM) is a technology that projects images onto the surfaces of physical objects, allowing multiple users to share an augmented reality experience without special devices. However, its practical use has been constrained by the need for dark environments to ensure high-quality projection. To overcome this ``dark-room constraint,'' we propose a novel target-excluding lighting method that selectively illuminates the surrounding environment while avoiding the PM target. Our system achieves light-field illumination by combining an LED display panel with an optimized aperiodic lens array. The key contributions include a compact form factor that provides a large effective light source area, reproducing natural soft shadows comparable to typical lighting, while maintaining the spatial controllability needed to precisely avoid the target. We also introduce a computational technique for optimizing aperiodic lens placement to suppress undesired dark spots caused by crosstalk, and efficient methods for computing LED luminance patterns that enable dynamic PM. Experiments with a prototype system demonstrate that our approach achieves high-contrast PM even in bright environments.

cs.HC↗
arXiv2025

Computational Design and Fabrication of Modular Robots with Untethered Control

Natural organisms utilize distributed actuation through their musculoskeletal systems to adapt their gait for traversing diverse terrains or to morph their bodies for varied tasks. A longstanding challenge in robotics is to emulate this capability of natural organisms, which has motivated the development of numerous soft robotic systems. However, such systems are generally optimized for a single functionality, lack the ability to change form or function on demand, or remain tethered to bulky control systems. To address these limitations, we present a framework for designing and controlling robots that utilize distributed actuation. We propose a novel building block that integrates 3D-printed bones with liquid crystal elastomer (LCE) muscles as lightweight actuators, enabling the modular assembly of musculoskeletal robots. We developed LCE rods that contract in response to infrared radiation, thereby providing localized, untethered control over the distributed skeletal network and producing global deformations of the robot. To fully capitalize on the extensive design space, we introduce two computational tools: one for optimizing the robot's skeletal graph to achieve multiple target deformations, and another for co-optimizing skeletal designs and control gaits to realize desired locomotion. We validate our framework by constructing several robots that demonstrate complex shape morphing, diverse control schemes, and environmental adaptability. Our system integrates advances in modular material building, untethered and distributed control, and computational design to introduce a new generation of robots that brings us closer to the capabilities of living organisms.

cs.RO↗
arXiv2025

Efficient Proxy Raytracer for Optical Systems using Implicit Neural Representations

Ray tracing is a widely used technique for modeling optical systems, involving sequential surface-by-surface computations, which can be computationally intensive. We propose Ray2Ray, a novel method that leverages implicit neural representations to model optical systems with greater efficiency, eliminating the need for surface-by-surface computations in a single pass end-to-end model. Ray2Ray learns the mapping between rays emitted from a given source and their corresponding rays after passing through a given optical system in a physically accurate manner. We train Ray2Ray on nine off-the-shelf optical systems, achieving positional errors on the order of 1μm and angular deviations on the order 0.01 degrees in the estimated output rays. Our work highlights the potential of neural representations as a proxy for optical raytracer.

cs.LG↗
arXiv2025

Artificial Blur Effect for Optical See-through Near-Eye Displays

Saliency modulation has significant potential for various applications. In our pursuit of implementing saliency modulation for optical see-through near-eye displays, we decided to introduce a blur effect to reduce the sharpness of specific areas while preserving the sharpness of others. In this study, we used a digital micromirror device (DMD) to separate the incoming light from a scene into sharp and blurred areas. To achieve this, we integrated an electrically tunable lens (ETL), which operates in its zero optical power mode when the reflected light from the DMD represents the sharp area (i.e., the blur area is masked). Conversely, when the reflected light indicates the blur area, the ETL adjusts to non-zero optical powers. Importantly, these modulations occur at a speed that surpasses the critical flicker frequency threshold of the human eye. Furthermore, we proposed an algorithm to mitigate the artifacts around the border area between the sharp and blur areas that are caused by the magnification of the ETL. We have also developed a prototype system to demonstrate the feasibility of our method.

physics.optics↗
arXiv2024

Casper DPM: Cascaded Perceptual Dynamic Projection Mapping onto Hands

We present a technique for dynamically projecting 3D content onto human hands with short perceived motion-to-photon latency. Computing the pose and shape of human hands accurately and quickly is a challenging task due to their articulated and deformable nature. We combine a slower 3D coarse estimation of the hand pose with high speed 2D correction steps which improve the alignment of the projection to the hands, increase the projected surface area, and reduce perceived latency. Since our approach leverages a full 3D reconstruction of the hands, any arbitrary texture or reasonably performant effect can be applied, which was not possible before. We conducted two user studies to assess the benefits of using our method. The results show subjects are less sensitive to latency artifacts and perform faster and with more ease a given associated task over the naive approach of directly projecting rendered frames from the 3D pose estimation. We demonstrate several novel use cases and applications.

cs.GR↗
arXiv2024

Projection Mapping under Environmental Lighting by Replacing Room Lights with Heterogeneous Projectors

Projection mapping (PM) is a technique that enhances the appearance of real-world surfaces using projected images, enabling multiple people to view augmentations simultaneously, thereby facilitating communication and collaboration. However, PM typically requires a dark environment to achieve high-quality projections, limiting its practicality. In this paper, we overcome this limitation by replacing conventional room lighting with heterogeneous projectors. These projectors replicate environmental lighting by selectively illuminating the scene, excluding the projection target. Our contributions include a distributed projector optimization framework designed to effectively replicate environmental lighting and the incorporation of a large-aperture projector, in addition to standard projectors, to reduce high-luminance emitted rays and hard shadows -- undesirable factors for collaborative tasks in PM. We conducted a series of quantitative and qualitative experiments, including user studies, to validate our approach. Our findings demonstrate that our projector-based lighting system significantly enhances the contrast and realism of PM results even under environmental lighting compared to typical lights. Furthermore, our method facilitates a substantial shift in the perceived color mode from the undesirable aperture-color mode, where observers perceive the projected object as self-luminous, to the surface-color mode in PM.

cs.GR↗
arXiv2023

Topology Optimization with Text-Guided Stylization

We propose an approach for the generation of topology-optimized structures with text-guided appearance stylization. This methodology aims to enrich the concurrent design of a structure's physical functionality and aesthetic appearance. Users can effortlessly input descriptive text to govern the style of the structure. Our system employs a hash-encoded neural network as the implicit structure representation backbone, which serves as the foundation for the co-optimization of structural mechanical performance, style, and connectivity, to ensure full-color, high-quality 3D-printable solutions. We substantiate the effectiveness of our system through extensive comparisons, demonstrations, and a 3D printing test.

cs.CE↗
arXiv2023

Focal Surface Projection: Extending Projector Depth-of-Field Using a Phase-Only Spatial Light Modulator

We present a focal surface projection to solve the narrow depth-of-field problem in projection mapping applications. We apply a phase-only spatial light modulator to realize nonuniform focusing distances, whereby the projected contents appear focused on a surface with considerable depth variations. The feasibility of the proposed technique was validated through a physical experiment.

physics.optics↗
arXiv2023

Neural Projection Mapping Using Reflectance Fields

We introduce a high resolution spatially adaptive light source, or a projector, into a neural reflectance field that allows to both calibrate the projector and photo realistic light editing. The projected texture is fully differentiable with respect to all scene parameters, and can be optimized to yield a desired appearance suitable for applications in augmented reality and projection mapping. Our neural field consists of three neural networks, estimating geometry, material, and transmittance. Using an analytical BRDF model and carefully selected projection patterns, our acquisition process is simple and intuitive, featuring a fixed uncalibrated projected and a handheld camera with a co-located light source. As we demonstrate, the virtual projector incorporated into the pipeline improves scene understanding and enables various projection mapping applications, alleviating the need for time consuming calibration steps performed in a traditional setting per view or projector location. In addition to enabling novel viewpoint synthesis, we demonstrate state-of-the-art performance projector compensation for novel viewpoints, improvement over the baselines in material and scene reconstruction, and three simply implemented scenarios where projection image optimization is performed, including the use of a 2D generative model to consistently dictate scene appearance from multiple viewpoints. We believe that neural projection mapping opens up the door to novel and exciting downstream tasks, through the joint optimization of the scene and projection images.

cs.CV↗
arXiv2023

NSTO: Neural Synthesizing Topology Optimization for Modulated Structure Generation

Nature evolves structures like honeycombs at optimized performance with limited material. These efficient structures can be artificially created with the collaboration of structural topology optimization and additive manufacturing. However, the extensive computation cost of topology optimization causes low mesh resolution, long solving time, and rough boundaries that fail to match the requirements for meeting the growing personal fabrication demands and printing capability. Therefore, we propose the neural synthesizing topology optimization that leverages a self-supervised coordinate-based network to optimize structures with significantly shorter computation time, where the network encodes the structural material layout as an implicit function of coordinates. Continuous solution space is further generated from optimization tasks under varying boundary conditions or constraints for users' instant inference of novel solutions. We demonstrate the system's efficacy for a broad usage scenario through numerical experiments and 3D printing.

cs.CE↗
arXiv2021

Multifocal Stereoscopic Projection Mapping

Stereoscopic projection mapping (PM) allows a user to see a three-dimensional (3D) computer-generated (CG) object floating over physical surfaces of arbitrary shapes around us using projected imagery. However, the current stereoscopic PM technology only satisfies binocular cues and is not capable of providing correct focus cues, which causes a vergence--accommodation conflict (VAC). Therefore, we propose a multifocal approach to mitigate VAC in stereoscopic PM. Our primary technical contribution is to attach electrically focus-tunable lenses (ETLs) to active shutter glasses to control both vergence and accommodation. Specifically, we apply fast and periodical focal sweeps to the ETLs, which causes the "virtual image'" (as an optical term) of a scene observed through the ETLs to move back and forth during each sweep period. A 3D CG object is projected from a synchronized high-speed projector only when the virtual image of the projected imagery is located at a desired distance. This provides an observer with the correct focus cues required. In this study, we solve three technical issues that are unique to stereoscopic PM: (1) The 3D CG object is displayed on non-planar and even moving surfaces; (2) the physical surfaces need to be shown without the focus modulation; (3) the shutter glasses additionally need to be synchronized with the ETLs and the projector. We also develop a novel compensation technique to deal with the "lens breathing" artifact that varies the retinal size of the virtual image through focal length modulation. Further, using a proof-of-concept prototype, we demonstrate that our technique can present the virtual image of a target 3D CG object at the correct depth. Finally, we validate the advantage provided by our technique by comparing it with conventional stereoscopic PM using a user study on a depth-matching task.

cs.CV↗
arXiv2021

Directionally Decomposing Structured Light for Projector Calibration

Intrinsic projector calibration is essential in projection mapping (PM) applications, especially in dynamic PM. However, due to the shallow depth-of-field (DOF) of a projector, more work is needed to ensure accurate calibration. We aim to estimate the intrinsic parameters of a projector while avoiding the limitation of shallow DOF. As the core of our technique, we present a practical calibration device that requires a minimal working volume directly in front of the projector lens regardless of the projector's focusing distance and aperture size. The device consists of a flat-bed scanner and pinhole-array masks. For calibration, a projector projects a series of structured light patterns in the device. The pinholes directionally decompose the structured light, and only the projected rays that pass through the pinholes hit the scanner plane. For each pinhole, we extract a ray passing through the optical center of the projector. Consequently, we regard the projector as a pinhole projector that projects the extracted rays only, and we calibrate the projector by applying the standard camera calibration technique, which assumes a pinhole camera model. Using a proof-of-concept prototype, we demonstrate that our technique can calibrate projectors with different focusing distances and aperture sizes at the same accuracy as a conventional method. Finally, we confirm that our technique can provide intrinsic parameters accurate enough for a dynamic PM application, even when a projector is placed too far from a projection target for a conventional method to calibrate the projector using a fiducial object of reasonable size.

cs.CV↗
arXiv2021

A Projector-Camera System Using Hybrid Pixels with Projection and Capturing Capabilities

We propose a novel projector-camera system (ProCams) in which each pixel has both projection and capturing capabilities. Our proposed ProCams solves the difficulty of obtaining precise pixel correspondence between the projector and the camera. We implemented a proof-of-concept ProCams prototype and demonstrated its applicability to a dynamic projection mapping.

cs.CV↗
arXiv2021

Projector Pixel Redirection Using Phase-Only Spatial Light Modulator

In projection mapping from a projector to a non-planar surface, the pixel density on the surface becomes uneven. This causes the critical problem of local spatial resolution degradation. We confirmed that the pixel density uniformity on the surface was improved by redirecting projected rays using a phase-only spatial light modulator.

cs.GR↗
arXiv2020

FibAR: Embedding Optical Fibers in 3D Printed Objects for Active Markers in Dynamic Projection Mapping

This paper presents a novel active marker for dynamic projection mapping (PM) that emits a temporal blinking pattern of infrared (IR) light representing its ID. We used a multi-material three dimensional (3D) printer to fabricate a projection object with optical fibers that can guide IR light from LEDs attached on the bottom of the object. The aperture of an optical fiber is typically very small; thus, it is unnoticeable to human observers under projection and can be placed on a strongly curved part of a projection surface. In addition, the working range of our system can be larger than previous marker-based methods as the blinking patterns can theoretically be recognized by a camera placed at a wide range of distances from markers. We propose an automatic marker placement algorithm to spread multiple active markers over the surface of a projection object such that its pose can be robustly estimated using captured images from arbitrary directions. We also propose an optimization framework for determining the routes of the optical fibers in such a way that collisions of the fibers can be avoided while minimizing the loss of light intensity in the fibers. Through experiments conducted using three fabricated objects containing strongly curved surfaces, we confirmed that the proposed method can achieve accurate dynamic PMs in a significantly wide working range.

cs.GR↗