arXiv subjects

Dallas Wulf

Publications and source records attributed to Dallas Wulf.

36 records · Page 2Linked to original sources

arXiv2023

Low-cost, Low-loss, Ultra-wideband Compact Feed for Interferometric Radio Telescopes

We have developed, built, and tested a new feed design for interferometric radio telescopes with "large-$N$, small-$D$" designs. Those arrays require low-cost and low-complexity feeds for mass production on reasonable timescales and budgets, and also require those feeds to be compact to minimize obstruction of the dishes, along with having ultra wide bands of operation for most current and future science goals. The feed presented in this paper modifies the exponentially tapered slot antenna (Vivaldi) and quad-ridged flared horn antenna designs by having an oversized backshort, a novel method of maintaining a small size that is well-suited for deeper dishes ($f/D\leq 0.25$). It is made of laser cut aluminum and printed circuit boards, such that it is inexpensive ($\lesssim$ 75 USD per feed in large-scale production) and quick to build; it has a 5:1 frequency ratio, and its size is approximately a third of its longest operating wavelength. We present the science and engineering constraints that went into design decisions, the development and optimization process, and the simulated performance. A version of this feed design was optimized and built for the Canadian Hydrogen Observatory and Radio-transient Detector (CHORD) prototypes. When simulated on CHORD's very deep dishes ($f/D=0.21$) and with CHORD's custom first stage amplifiers, the on-sky system temperature $T_\mathrm{sys}$ of the complete receiving system from dish to digitizer remains below 30 K over most of the 0.3-1.5 GHz band, and maintains an aperture efficiency $η_\mathrm{A}$ between 0.4 and 0.6. The entire receiving chain operates at ambient temperature. The feed is designed to slightly under-illuminate the CHORD dishes, in order to minimize coupling between array elements and spillover.

astro-ph.IM↗

arXiv2023

CHIME/FRB Discovery of 25 Repeating Fast Radio Burst Sources

We present the discovery of 25 new repeating fast radio burst (FRB) sources found among CHIME/FRB events detected between 2019 September 30 and 2021 May 1. The sources were found using a new clustering algorithm that looks for multiple events co-located on the sky having similar dispersion measures (DMs). The new repeaters have DMs ranging from $\sim$220 pc cm$^{-3}$ to $\sim$1700 pc cm$^{-3}$, and include sources having exhibited as few as two bursts to as many as twelve. We report a statistically significant difference in both the DM and extragalactic DM (eDM) distributions between repeating and apparently nonrepeating sources, with repeaters having lower mean DM and eDM, and we discuss the implications. We find no clear bimodality between the repetition rates of repeaters and upper limits on repetition from apparently nonrepeating sources after correcting for sensitivity and exposure effects, although some active repeating sources stand out as anomalous. We measure the repeater fraction over time and find that it tends to an equilibrium of $2.6_{-2.6}^{+2.9}$% over our total time-on-sky thus far. We also report on 14 more sources which are promising repeating FRB candidates and which merit follow-up observations for confirmation.

astro-ph.HE↗

arXiv2023

The First CHIME/FRB Fast Radio Burst Catalog

We present a catalog of 536 fast radio bursts (FRBs) detected by the Canadian Hydrogen Intensity Mapping Experiment Fast Radio Burst (CHIME/FRB) Project between 400 and 800 MHz from 2018 July 25 to 2019 July 1, including 62 bursts from 18 previously reported repeating sources. The catalog represents the first large sample, including bursts from repeaters and non-repeaters, observed in a single survey with uniform selection effects. This facilitates comparative and absolute studies of the FRB population. We show that repeaters and apparent non-repeaters have sky locations and dispersion measures (DMs) that are consistent with being drawn from the same distribution. However, bursts from repeating sources differ from apparent non-repeaters in intrinsic temporal width and spectral bandwidth. Through injection of simulated events into our detection pipeline, we perform an absolute calibration of selection effects to account for systematic biases. We find evidence for a population of FRBs - comprising a large fraction of the overall population - with a scattering time at 600 MHz in excess of 10 ms, of which only a small fraction are observed by CHIME/FRB. We infer a power-law index for the cumulative fluence distribution of $α=-1.40\pm0.11(\textrm{stat.})^{+0.06}_{-0.09}(\textrm{sys.})$, consistent with the $-3/2$ expectation for a non-evolving population in Euclidean space. We find $α$ is steeper for high-DM events and shallower for low-DM events, which is what would be expected when DM is correlated with distance. We infer a sky rate of $[525\pm30(\textrm{stat.})^{+140}_{-130}({\textrm{sys.}})]/\textrm{sky}/\textrm{day}$ above a fluence of 5 Jy ms at 600 MHz, with scattering time at $600$ MHz under 10 ms, and DM above 100 pc cm$^{-3}$.

astro-ph.HE↗

arXiv2022

Characterization of the John A. Galt telescope for radio holography with CHIME

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) will measure the 21 cm emission of astrophysical neutral hydrogen to probe large scale structure at redshifts z=0.8-2.5. However, detecting the 21 cm signal beneath substantially brighter foregrounds remains a key challenge. Due to the high dynamic range between 21 cm and foreground emission, an exquisite calibration of instrument systematics, notably the telescope beam, is required to successfully filter out the foregrounds. One technique being used to achieve a high fidelity measurement of the CHIME beam is radio holography, wherein signals from each of CHIME's analog inputs are correlated with the signal from a co-located reference antenna, the 26 m John A. Galt telescope, as the 26 m Galt telescope tracks a bright point source transiting over CHIME. In this work we present an analysis of several of the Galt telescope's properties. We employ driftscan measurements of several bright sources, along with background estimates derived from the 408 MHz Haslam map, to estimate the Galt system temperature. To determine the Galt telescope's beam shape, we perform and analyze a raster scan of the bright radio source Cassiopeia A. Finally, we use early holographic measurements to measure the Galt telescope's geometry with respect to CHIME for the holographic analysis of the CHIME and Galt interferometric data set.

astro-ph.IM↗

arXiv2022

Antenna characterization for the HIRAX experiment

The Hydrogen Intensity and Real-time Analysis eXperiment (HIRAX) aims to improve constraints on the dark energy equation of state through measurements of large-scale structure at high redshift ($0.8 $700MHz. Noise temperature measurements of the HIRAX feeds were performed in a custom apparatus built at Yale. In this system, identical loads, one cryogenic and the other at room temperature, are used to take a differential (Y-factor) measurement from which the noise of the system is inferred. Several measurement sets have been conducted using the system, involving CHIME feeds as well as four of the HIRAX active feeds. These measurements give the first noise temperature measurements of the HIRAX feed, revealing a $\sim$60K noise temperature (relative to 30K target) with 40K peak- to-peak frequency-dependent features, and provide the first demonstration of feed repeatability. Both findings inform current and future feed designs.

astro-ph.IM↗

arXiv2022

Sub-second periodicity in a fast radio burst

Fast radio bursts (FRBs) are millisecond-duration flashes of radio waves that are visible at distances of billions of light-years. The nature of their progenitors and their emission mechanism remain open astrophysical questions. Here we report the detection of the multi-component FRB 20191221A and the identification of a periodic separation of 216.8(1) ms between its components with a significance of 6.5 sigmas. The long (~3 s) duration and nine or more components forming the pulse profile make this source an outlier in the FRB population. Such short periodicity provides strong evidence for a neutron-star origin of the event. Moreover, our detection favours emission arising from the neutron-star magnetosphere, as opposed to emission regions located further away from the star, as predicted by some models.

astro-ph.HE↗

arXiv2022

An Overview of CHIME, the Canadian Hydrogen Intensity Mapping Experiment

The Canadian Hydrogen Intensity Mapping Experiment (CHIME) is a drift scan radio telescope operating across the 400-800 MHz band. CHIME is located at the Dominion Radio Astrophysical Observatory near Penticton, BC Canada. The instrument is designed to map neutral hydrogen over the redshift range 0.8 to 2.5 to constrain the expansion history of the Universe. This goal drives the design features of the instrument. CHIME consists of four parallel cylindrical reflectors, oriented north-south, each 100 m $\times$ 20 m and outfitted with a 256 element dual-polarization linear feed array. CHIME observes a two degree wide stripe covering the entire meridian at any given moment, observing 3/4 of the sky every day due to Earth rotation. An FX correlator utilizes FPGAs and GPUs to digitize and correlate the signals, with different correlation products generated for cosmological, fast radio burst, pulsar, VLBI, and 21 cm absorber backends. For the cosmology backend, the $N_\mathrm{feed}^2$ correlation matrix is formed for 1024 frequency channels across the band every 31 ms. A data receiver system applies calibration and flagging and, for our primary cosmological data product, stacks redundant baselines and integrates for 10 s. We present an overview of the instrument, its performance metrics based on the first three years of science data, and we describe the current progress in characterizing CHIME's primary beam response. We also present maps of the sky derived from CHIME data; we are using versions of these maps for a cosmological stacking analysis as well as for investigation of Galactic foregrounds.

astro-ph.IM↗

arXiv2022

Using the Sun to Measure the Primary Beam Response of the Canadian Hydrogen Intensity Mapping Experiment

We present a beam pattern measurement of the Canadian Hydrogen Intensity Mapping Experiment (CHIME) made using the Sun as a calibration source. As CHIME is a pure drift scan instrument, we rely on the seasonal North-South motion of the Sun to probe the beam at different elevations. This semiannual range in elevation, combined with the radio brightness of the Sun, enables a beam measurement which spans ~7,200 square degrees on the sky without the need to move the telescope. We take advantage of observations made near solar minimum to minimize the impact of solar variability, which is observed to be <10% in intensity over the observation period. The resulting data set is highly complementary to other CHIME beam measurements -- both in terms of angular coverage and systematics -- and plays an important role in the ongoing program to characterize the CHIME primary beam.

astro-ph.IM↗

arXiv2022

A High-Time Resolution Search for Compact Objects using Fast Radio Burst Gravitational Lens Interferometry with CHIME/FRB

The gravitational field of compact objects, such as primordial black holes, can create multiple images of background sources. For transients such as fast radio bursts (FRBs), these multiple images can be resolved in the time domain. Under certain circumstances, these images not only have similar burst morphologies but are also phase-coherent at the electric field level. With a novel dechannelization algorithm and a matched filtering technique, we search for repeated copies of the same electric field waveform in observations of FRBs detected by the FRB backend of the Canadian Hydrogen Mapping Intensity Experiment (CHIME). An interference fringe from a coherent gravitational lensing signal will appear in the time-lag domain as a statistically-significant peak in the time-lag autocorrelation function. We calibrate our statistical significance using telescope data containing no FRB signal. Our dataset consists of $\sim$100-ms long recordings of voltage data from 172 FRB events, dechannelized to 1.25-ns time resolution. This coherent search algorithm allows us to search for gravitational lensing signatures from compact objects in the mass range of $10^{-4}-10^{4} ~\mathrm{M_{\odot}}$. After ruling out an anomalous candidate due to diffractive scintillation, we find no significant detections of gravitational lensing in the 172 FRB events that have been analyzed. In a companion work [Leung, Kader+2022], we interpret the constraints on dark matter from this search.

astro-ph.HE↗

arXiv2022

Detection of Cosmological 21 cm Emission with the Canadian Hydrogen Intensity Mapping Experiment

We present a detection of 21-cm emission from large-scale structure (LSS) between redshift 0.78 and 1.43 made with the Canadian Hydrogen Intensity Mapping Experiment (CHIME). Radio observations acquired over 102 nights are used to construct maps which are foreground filtered and stacked on the angular and spectral locations of luminous red galaxies (LRG), emission line galaxies (ELG), and quasars (QSO) from the eBOSS clustering catalogs. We find decisive evidence for a detection when stacking on all three tracers of LSS, with the logarithm of the Bayes Factor equal to 18.9 (LRG), 10.8 (ELG), and 56.3 (QSO). An alternative frequentist interpretation, based on the likelihood-ratio test, yields a detection significance of $7.1σ$ (LRG), $5.7σ$ (ELG), and $11.1σ$ (QSO). These are the first 21-cm intensity mapping measurements made with an interferometer. We constrain the effective clustering amplitude of neutral hydrogen (HI), defined as $\mathcal{A}_{\rm HI}\equiv 10^{3}\,Ω_\mathrm{HI}\left(b_\mathrm{HI}+\langle\,fμ^{2}\rangle\right)$, where $Ω_\mathrm{HI}$ is the cosmic abundance of HI, $b_\mathrm{HI}$ is the linear bias of HI, and $\langle\,fμ^{2}\rangle=0.552$ encodes the effect of redshift-space distortions at linear order. We find $\mathcal{A}_\mathrm{HI}=1.51^{+3.60}_{-0.97}$ for LRGs $(z=0.84)$, $\mathcal{A}_\mathrm{HI}=6.76^{+9.04}_{-3.79}$ for ELGs $(z=0.96)$, and $\mathcal{A}_\mathrm{HI}=1.68^{+1.10}_{-0.67}$ for QSOs $(z=1.20)$, with constraints limited by modeling uncertainties at nonlinear scales. We are also sensitive to bias in the spectroscopic redshifts of each tracer, and find a non-zero bias $Δ\,v= -66 \pm 20 \mathrm{km/s}$ for the QSOs. We split the QSO catalog into three redshift bins and have a decisive detection in each, with the upper bin at $z=1.30$ producing the highest redshift 21-cm intensity mapping measurement thus far.

astro-ph.CO↗

arXiv2022

The Hydrogen Intensity and Real-time Analysis eXperiment: 256-Element Array Status and Overview

The Hydrogen Intensity and Real-time Analysis eXperiment (HIRAX) is a radio interferometer array currently in development, with an initial 256-element array to be deployed at the South African Radio Astronomy Observatory (SARAO) Square Kilometer Array (SKA) site in South Africa. Each of the 6m, $f/0.23$ dishes will be instrumented with dual-polarisation feeds operating over a frequency range of 400-800 MHz. Through intensity mapping of the 21 cm emission line of neutral hydrogen, HIRAX will provide a cosmological survey of the distribution of large-scale structure over the redshift range of $0.775 < z < 2.55$ over $\sim$15,000 square degrees of the southern sky. The statistical power of such a survey is sufficient to produce $\sim$7 percent constraints on the dark energy equation of state parameter when combined with measurements from the Planck satellite. Additionally, HIRAX will provide a highly competitive platform for radio transient and HI absorber science while enabling a multitude of cross-correlation studies. In this paper, we describe the science goals of the experiment, overview of the design and status of the sub-components of the telescope system, and describe the expected performance of the initial 256-element array as well as the planned future expansion to the final, 1024-element array.

astro-ph.IM↗

arXiv2021

Mechanical and Optical Design of the HIRAX Radio Telescope

The Hydrogen Intensity and Real-time Analysis eXperiment (HIRAX) is a planned interferometric radio telescope array that will ultimately consist of 1024 close packed 6 m dishes that will be deployed at the SKA South Africa site. HIRAX will survey the majority of the southern sky to measure baryon acoustic oscillations (BAO) using the 21 cm hyperfine transition of neutral hydrogen. It will operate between 400-800 MHz with 391 kHz resolution, corresponding to a redshift range of $0.8 < z < 2.5$ and a minimum $Δz/z$ of ~0.003. One of the primary science goals of HIRAX is to constrain the dark energy equation of state by measuring the BAO scale as a function of redshift over a cosmologically significant range. Achieving this goal places stringent requirements on the mechanical and optical design of the HIRAX instrument which are described in this paper. This includes the simulations used to optimize the instrument, including the dish focal ratio, receiver support mechanism, and instrument cabling. As a result of these simulations, the dish focal ratio has been reduced to 0.23 to reduce inter-dish crosstalk, the feed support mechanism has been redesigned as a wide (35 cm diam.) central column, and the feed design has been modified to allow the cabling for the receiver to pass directly along the symmetry axis of the feed and dish in order to eliminate beam asymmetries and reduce sidelobe amplitudes. The beams from these full-instrument simulations are also used in an astrophysical m-mode analysis pipeline which is used to evaluate cosmological constraints and determine potential systematic contamination due to physical non-redundancies of the array elements. This end-to-end simulation pipeline was used to inform the dish manufacturing and assembly specifications which will guide the production and construction of the first-stage HIRAX 256-element array.

astro-ph.IM↗

arXiv2021

Design and implementation of a noise temperature measurement system for the Hydrogen Intensity and Real-time Analysis eXperiment (HIRAX)

This paper describes the design, implementation, and verification of a test-bed for determining the noise temperature of radio antennas operating between 400-800MHz. The requirements for this test-bed were driven by the HIRAX experiment, which uses antennas with embedded amplification, making system noise characterization difficult in the laboratory. The test-bed consists of two large cylindrical cavities, each containing radio-frequency (RF) absorber held at different temperatures (300K and 77K), allowing a measurement of system noise temperature through the well-known 'Y-factor' method. The apparatus has been constructed at Yale, and over the course of the past year has undergone detailed verification measurements. To date, three preliminary noise temperature measurement sets have been conducted using the system, putting us on track to make the first noise temperature measurements of the HIRAX feed and perform the first analysis of feed repeatability.

astro-ph.IM↗

arXiv2020

Optimal Filtering of Overlapped Pulses in Microcalorimeter Data

Here we present a general algorithm for processing microcalorimeter data with special applicability to data with high photon count rates. Conventional optimal filtering, which has become ubiquitous in microcalorimeter data processing, suffers from its inability to recover overlapped pulses without sacrificing spectral resolution. The technique presented here was developed to address this particular shortcoming, and does so without imposing any assumptions beyond those made by the conventional technique. We demonstrate the algorithm's performance with a data set that approximately satisfies these assumptions, and which is representative of a wide range of microcalorimeter applications. We also apply the technique to a highly non-linear data set, examining the impact on performance in the limit that these assumptions break down.

physics.ins-det↗

arXiv2019

Canada and the SKA from 2020-2030

This white paper submitted for the 2020 Canadian Long-Range Planning process (LRP2020) presents the prospects for Canada and the Square Kilometre Array (SKA) from 2020-2030, focussing on the first phase of the project (SKA1) scheduled to begin construction early in the next decade. SKA1 will make transformational advances in our understanding of the Universe across a wide range of fields, and Canadians are poised to play leadership roles in several. Canadian key SKA technologies will ensure a good return on capital investment in addition to strong scientific returns, positioning Canadian astronomy for future opportunities well beyond 2030. We therefore advocate for Canada's continued scientific and technological engagement in the SKA from 2020-2030 through participation in the construction and operations phases of SKA1.

astro-ph.IM↗

arXiv2019

Low-redshift 21cm Cosmology in Canada

Line-intensity mapping of the 21cm line is a powerful probe of large scale structure at z<6, tracing large-scale structure via neutral hydrogen content that is found within galaxies. In principle, it enables cost-efficient surveys of the matter distribution up to z~6, unlocking orders of magnitude more modes for observational cosmology. Canada has been a traditional leader in this field, having led the first detections of the cosmological 21cm signal via cross-correlations with optical galaxy surveys and having constructed the Canadian Hydrogen Intensity Mapping Experiment (CHIME). The field is now entering a new era where data is abundant, allowing studies in how to overcome systematics to be tackled in an empirical, head-on fashion. In the next few years, this will produce the first detection of the 21cm auto power spectrum, which will pave the way towards a large suite of scientific possibilities. These potentially include precision measurements on the dark energy equation of state and other LCDM parameters, constraints on how HI mass traces dark matter, a detection of neutrino effects on large-scale structure, and the use of 21cm lensing to further constrain cosmology. To turn these promising directions into reality, we recommend a sustained program of investment in 21cm cosmology, starting with funding for the Canadian Hydrogen Observatory and Radio transient Detector (CHORD), followed by small-scale development efforts targeting next-generation hardware and sustained support for theory and technical staff support. Additionally, Canada should invest in complementary line-intensity mapping efforts (such as with CO or [CII] lines) and maintain participation in next-generation international efforts such as the Packed Ultra-wideband Mapping Array (PUMA) and the Square Kilometre Array (SKA).

astro-ph.CO↗

arXiv2019

A High Spectral Resolution Study of the Soft X-ray Background with the X-ray Quantum Calorimeter

We present here a combined analysis of four high spectral resolution observations of the Diffuse X-ray Background (DXRB), made using the University of Wisconsin-Madison/Goddard Space Flight Center X-ray Quantum Calorimeter (XQC) sounding rocket payload. The observed spectra support the existence of a $\sim0.1~$keV Local Hot Bubble and a $\sim0.2~$keV Hot Halo, with discrepancies between repeated observations compatible with expected contributions of time-variable emission from Solar Wind Charge Exchange (SWCX). An additional component of $\sim0.9~$keV emission observed only at low galactic latitudes can be consistently explained by unresolved dM stars.

astro-ph.GA↗

arXiv2019

Research and Development for HI Intensity Mapping

Development of the hardware, data analysis, and simulation techniques for large compact radio arrays dedicated to mapping the 21 cm line of neutral hydrogen gas has proven to be more difficult than imagined twenty years ago when such telescopes were first proposed. Despite tremendous technical and methodological advances, there are several outstanding questions on how to optimally calibrate and analyze such data. On the positive side, it has become clear that the outstanding issues are purely technical in nature and can be solved with sufficient development activity. Such activity will enable science across redshifts, from early galaxy evolution in the pre-reionization era to dark energy evolution at low redshift.

astro-ph.IM↗