arXiv subjects

Damian A. Scherlis

Publications and source records attributed to Damian A. Scherlis.

12 recordsLinked to original sources

arXiv2025

Bias, length, or coupling? What controls the quantum efficiency of electroluminescent single-polymers

Since the first evidence of luminescence of organic polymers in STM junctions, efforts have been invested in elucidating how to leverage the voltage, anchoring chemistry, and molecular structure to optimize emission power and efficiency. Understanding the fundamentals underlying current-driven molecular emission is important not only for OLED engineering, but also to control luminescence at the atomic scale toward the mastering of single or localized photon sources. However, the difficulty in isolating the separate roles of the variables at play in molecular junction experiments, has precluded a general comprehension of their distinctive effects on the emitted power and the quantum yield. In the present report, we use time-dependent electronic structure simulations based on quantum electrodynamics to disentangle the incidence of bias, electronic coupling and molecular length on device performance, with polyphenylene-vinylene as a case study. A careful validation demonstrates that our approach can achieve quantitative agreement with available experimental data. Through its application we identify the applied bias as the main factor determining emission power. The quantum efficiency, however, is influenced only minimally by bias and electronic coupling, and is instead dominated by polymer length, on which it depends exponentially. Thus, using longer polymer chains emerges as the primary strategy for achieving higher efficiencies. Our results thereby provide key prescriptions for designing single-molecule electroluminescent platforms.

cond-mat.mtrl-sci↗

arXiv2023

Water Self-Dissociation is Insensitive to Nanoscale Environments

Nanoconfinement effects on water dissociation and reactivity remain controversial, despite their importance to understand the aqueous chemistry at interfaces, pores, or aerosols. The pKw in confined environments has been assessed from experiments and simulations in a few specific cases, leading to dissimilar conclusions. Here, with the use of carefully designed \textit{ab-initio} simulations, we demonstrate that the energetics of bulk water dissociation is conserved intact to unexpectedly small length-scales, down to aggregates of only a dozen molecules or pores of widths below 2 nm. The reason is that most of the free-energy involved in water autoionization comes from breaking the O-H covalent bond, which has a comparable barrier in the bulk liquid, in a small droplet of nanometer size, or in a nanopore in the absence of strong interfacial interactions. Thus, dissociation free-energy profiles in nanoscopic aggregates or in 2D slabs of 1 nm width reproduce the behavior corresponding to the bulk liquid, regardless of whether the corresponding nanophase is delimited by a solid or a gas interface. The present work provides a definite and fundamental description of the mechanism and thermodynamics of water dissociation at different scales with broader implications on reactivity and self-ionization at the air-liquid interface.

cond-mat.soft↗

arXiv2019

Driven Liouville-von Neumann Equation for Quantum Transport and Multiple-Probe Green's Functions

The so called Driven Liouville-von Neumann equation is a dynamical formulation to simulate a voltage bias across a molecular system and to model a time-dependent current in a grand-canonical framework. This approach introduces a damping term in the equation of motion that drives the charge to a reference, out of equilibrium density. Originally proposed by Horsfield and co-workers, further work on this scheme has led to different coexisting versions of this equation. On the other hand, the multiple-probe scheme devised by Todorov and collaborators, known as the hairy-probes method, is a formal treatment based on Green's functions that allows to fix the electrochemical potentials in two regions of an open quantum system. In this article, the equations of motion of the hairy probes formalism are rewritten to show that, under certain conditions, they can assume the same algebraic structure as the Driven Liouville-von Neumann equation in the form proposed by Morzan et al. [J. Chem. Phys. 2017, 146, 044110]. In this way, a new formal ground is provided for the latter, identifying the origin of every term. The performance of the different methods are explored using tight-binding time-dependent simulations in three trial structures, designated as ballistic, disordered, and resonant models. In the context of first-principles Hamiltonians the Driven Liouville-von Neumann approach is of special interest, because it does not require the calculation of Green's functions. Hence, the effects of replacing the reference density based on the Green's function by one obtained from an applied field are investigated, to gain a deeper understanding of the limitations and the range of applicability of the Driven Liouville-von Neumann equation.

cond-mat.mes-hall↗

arXiv2016

A Quantum-Mechanics Molecular-Mechanics scheme for extended systems

We introduce and discuss a hybrid quantum-mechanics molecular-mechanics (QM-MM) approach for Car-Parrinello DFT simulations with pseudopotentials and planewaves basis, designed for the treatment of periodic systems. In this implementation the MM atoms are considered as additional QM ions having fractional charges of either sign, which provides conceptual and computational simplicity by exploiting the machinery already existing in planewave codes to deal with electrostatics in periodic boundary conditions. With this strategy, both the QM and MM regions are contained in the same supercell, which determines the periodicity for the whole system. Thus, while this method is not meant to compete with non-periodic QM-MM schemes able to handle extremely large but finite MM regions, it is shown that for periodic systems of a few hundred atoms, our approach provides substantial savings in computational times by treating classically a fraction of the particles. The performance and accuracy of the method is assessed through the study of energetic, structural, and dynamical aspects of the water dimer and of the aqueous bulk phase. Finally, the QM-MM scheme is applied to the computation of the vibrational spectra of water layers adsorbed at the TiO$_2$ anatase (101) solid-liquid interface. This investigation suggests that the inclusion of a second monolayer of H$_2$O molecules is sufficient to induce on the first adsorbed layer, a vibrational dynamics similar to that taking place in the presence of an aqueous environment. The present QM-MM scheme appears as a very interesting tool to efficiently perform molecular dynamics simulations of complex condensed matter systems, from solutions to nanoconfined fluids to different kind of interfaces.

cond-mat.mtrl-sci↗

arXiv2016

Electron transport in real time from first-principles

While the vast majority of calculations reported on molecular conductance have been based on the static non-equilibrium Green's function formalism combined with density functional theory, in recent years a few time-depedent approaches to transport have started to emerge. Among these, the driven Liouville-von Neumann equation (J. Chem. Phys. 124, 214708 (2006)) is a simple and appealing route relying on a tunable rate parameter, which has been explored in the context of semi-empirical methods. In the present study, we adapt this formulation to a density functional theory framework and analyze its performance. In particular, it is implemented in an efficient all-electron DFT code with Gaussian basis functions, suitable for quantum-dynamics simulations of large molecular systems. At variance with the case of the tight-binding calculations reported in the literature, we find that now the initial perturbation to drive the system out of equilibrium plays a fundamental role in the stability of the electron dynamics, and that the equation of motion used in previous tight-binding implementations has to be modified to conserve the total number of particles during time propagation. Moreover, we propose a procedure to get rid of the dependence of the current-voltage curves on the rate parameter. This method is employed to obtain the current-voltage characteristic of saturated and unsaturated hydrocarbons of different lenghts, with very promising prospects.

cond-mat.mtrl-sci↗

arXiv2009

First-principles molecular dynamics simulations at solid-liquid interfaces with a continuum solvent

Continuum solvent models have become a standard technique in the context of electronic structure calculations, yet, no implementations have been reported capable to perform molecular dynamics at solid-liquid interfaces. We propose here such a continuum approach in a DFT framework, using plane-waves basis sets and periodic boundary conditions. Our work stems from a recent model designed for Car-Parrinello simulations of quantum solutes in a dielectric medium [J. Chem. Phys. 124, 74103 (2006)], for which the permittivity of the solvent is defined as a function of the electronic density of the solute. This strategy turns out to be inadequate for systems extended in two dimensions, by introducing new term in the Kohn-Sham potential which becomes unphysically large at the interfacial region, seriously affecting the convergence. If the dielectric medium is properly redefined as a function of the atomic coordinates, a good convergence is obtained and the constant of motion is conserved during the molecular dynamics simulations. Moreover, a significant gain in efficiency can be achieved if the simulation box is partitioned in two, solving the Poisson problem separately for the "dry" region using fast Fourier transforms, and for the solvated or "wet" region using a multigrid method. Eventually both solutions are combined in a self-consistent procedure, and in this way Car-Parrinello molecular dynamics simulations of solid-liquid interfaces can be performed at a very moderate computational cost. This scheme is employed to investigate the acid-base equilibrium at the TiO2-water interface.

physics.chem-ph↗

arXiv2007

Simulation of Heme using DFT+U: a step toward accurate spin-state energetics

We investigate the DFT+U approach as a viable solution to describe the low-lying states of ligated and unligated iron heme complexes. Besides their central role in organometallic chemistry, these compounds represent a paradigmatic case where LDA, GGA, and common hybrid functionals fail to reproduce the experimental magnetic splittings. In particular, the imidazole pentacoordinated heme is incorrectly described as a triplet by all usual DFT flavors. In this study we show that a U parameter close to 4 eV leads to spin transitions and molecular geometries in quantitative agreement with experiments, and that DFT+U represents an appealing tool in the description of iron porphyrin complexes, at a much reduced cost compared to correlated quantum-chemistry methods. The possibility of obtaining the U parameter from first-principles is explored through a self-consistent linear-response formulation. We find that this approach, which proved to be successful in other iron systems, produces in this case some overestimation with respect to the optimal values of U.

cond-mat.soft↗

arXiv2006

The Effect of Counterions on the Interactions of Charged Oligothiophenes

The functionality of conjugated polymer systems often relies on oxidations or reductions, in most cases mediated by the presence of counterions. The effect that the common counterion hexafluorophosphate (PF6-) has on the intermolecular interactions between charged oligothiophenes is investigated here using ab initio quantum chemistry methods. Counterions are explicitly included in the simulations of oxidized oligothiophenes and in the dimerization process. Our calculations provide quantitative and qualitative insight into the intermolecular interactions in oligothiophene-counterion systems and show that the intermolecular pi-stacking of oligothiophenes is not adversely affected by the presence of counterions, and that in fact oligothiophene dimerization is further stabilized by their presence.

cond-mat.mtrl-sci↗

arXiv2006

Density functional theory in transition-metal chemistry: a self-consistent Hubbard U approach

Transition-metal centers are the active sites for many biological and inorganic chemical reactions. Notwithstanding this central importance, density-functional theory calculations based on generalized-gradient approximations often fail to describe energetics, multiplet structures, reaction barriers, and geometries around the active sites. We suggest here an alternative approach, derived from the Hubbard U correction to solid-state problems, that provides an excellent agreement with correlated-electron quantum chemistry calculations in test cases that range from the ground state of Fe$_2$ and Fe$_2^-$ to the addition-elimination of molecular hydrogen on FeO$^+$. The Hubbard U is determined with a novel self-consistent procedure based on a linear-response approach.

cond-mat.soft↗

arXiv2005

Stacking of oligo and polythiophenes cations in solution: surface tension and dielectric saturation

The stacking of positively charged (or doped) terthiophene oligomers and quaterthiophene polymers in solution is investigated applying a recently developed unified electrostatic and cavitation model for first-principles calculations in a continuum solvent. The thermodynamic and structural patterns of the dimerization are explored in different solvents, and the distinctive roles of polarity and surface tension are characterized and analyzed. Interestingly, we discover a saturation in the stabilization effect of the dielectric screening that takes place at rather small values of $ε_0$. Moreover, we address the interactions in trimers of terthiophene cations, with the aim of generalizing the results obtained for the dimers to the case of higher-order stacks and nanoaggregates.

cond-mat.mtrl-sci↗

arXiv2005

A unified electrostatic and cavitation model for first-principles molecular dynamics in solution

The electrostatic continuum solvent model developed by Fattebert and Gygi is combined with a first-principles formulation of the cavitation energy based on a natural quantum-mechanical definition for the surface of a solute. Despite its simplicity, the cavitation contribution calculated by this approach is found to be in remarkable agreement with that obtained by more complex algorithms relying on a large set of parameters. Our model allows for very efficient Car-Parrinello simulations of finite or extended systems in solution, and demonstrates a level of accuracy as good as that of established quantum-chemistry continuum solvent methods. We apply this approach to the study of tetracyanoethylene dimers in dichloromethane, providing valuable structural and dynamical insights on the dimerization phenomenon.

cond-mat.mtrl-sci↗

arXiv2004

Pi-stacking in charged thiophene oligomers

The pi-stacking of oxidized thiophene oligomers is investigated using ab-initio quantum chemistry methods. Dimers of singly-charged oligothiophenes are found to be unstable in the gas phase, but can be stabilized as bound dications in the singlet state by a polarizable solvent such as acetonitrile. Our calculations provide a detailed description of the mechanisms and the energetics involved in the dimerization phenomenon, and highlight the role and importance of the environment in the stabilization of the stacks. The need for accurate treatments of electronic correlations and of solvation effects for a realistic description of these materials is underscored.

cond-mat.mtrl-sci↗