arXiv subjects

Dan Raviv

Publications and source records attributed to Dan Raviv.

At least 19 recordsLinked to original sources

arXiv2026

Catastrophic Forgetting is Low-Rank: A Function-Space Theory for Continual Adaptation

Catastrophic forgetting in continual adaptation is usually studied through parameter drift, replay, or distillation, but these views do not identify which output-space directions are vulnerable. We give a function-space account in the NTK regime: new-task training induces old-task prediction drift through the cross-task kernel, yielding a closed-form predictor for the forgetting vector before any new-task gradient step. In frozen-backbone linear-head PEFT-CL, where the model is linear in the trainable parameters, the predictor is exact up to numerical precision; for nonlinear adapters/full fine-tuning, it is a local NTK approximation. The same expression reveals that forgetting concentrates in a small number of old-task NTK eigenmodes and under frozen linear heads gives a Kronecker scaling rule for the vulnerable rank. These results clarify the relation to prior NTK-overlap theory, explain why parameter-space regularizers can miss output-space interference, and motivate a targeted spectral regularizer.

cs.LG↗

arXiv2026

Harnessing Selective State Space Models to Enhance Semianalytical Design of Fabrication-Ready Multilayered Huygens' Metasurfaces: Part I - Field-based Semianalytical Synthesis

Planar metasurfaces can profoundly control electromagnetic scattering. At microwave frequencies, such devices are typically implemented using multilayer cascades of patterned metallic sheets, whose design often requires time-consuming full-wave optimization. Here, we extend analytical models originally developed for sparse loaded-wire metagratings to accurately describe densely packed Jerusalem-cross meta-atoms embedded in standard printed circuit board (PCB) dielectric stacks. The model captures both near- and far-field coupling within and between layers, enabling efficient prediction of the dual-polarized response. Using this framework, we identify highly transmissive meta-atoms whose phase is controlled by the leg lengths of the Jerusalem crosses (microscopic design stage). This (phase)-(leg-length) "lookup table" allows rapid synthesis of Huygens' metasurfaces (macroscopic design stage), demonstrated through a full-wave-validated metalens exhibiting low-reflection beam manipulation. Notably, we implement a judicious scaling method to further extend the model to predict wideband meta-atom responses. In the companion paper (Part II), a hybrid machine-learning approach leverages this semianalytical framework to enhance accuracy without requiring the conventional exhaustive full-wave training, enabling ultrafast inverse design across the full parameter space. Overall, the presented methodology -- the standalone semianlytical scheme (Part I) and the machine-learning enhanced version (Part II) -- establishes an effective open-source toolkit for versatile, rapid, and highly accurate synthesis of fabrication-ready dual-polarized transmissive Huygens' meta-atoms and metasurfaces.

physics.app-ph↗

arXiv2026

Harnessing Selective State Space Models to Enhance Semianalytical Design of Fabrication-Ready Multilayered Huygens' Metasurfaces: Part II - Generative Inverse Design (MetaMamba)

We present a generative framework for inverse design of five-layer transmissive Huygens' metasurfaces (HMSs), addressing a longstanding challenge in achieving full-phase, high-efficiency unit cell designs with minimal full-wave simulations. The key to achieving this is our reliance on the field-based semianalytical (SA) scheme developed in Part I of this paper, which allows rapid and highly effective synthesis of such multilayer composites, however with limited accuracy. To overcome the prohibitive data demands of traditional pipelines, we employ Mamba, a selective state space model well suited for long-range sequence modeling as the backbone of our learning framework. A bidirectional Mamba (Bi-Mamba) forward surrogate is first trained on SA-generated data and subsequently fine-tuned with full-wave CST samples. An ablation over a 1080-sample CST pool shows that as few as 270 full-wave calibration samples suffice to reach near-CST-level agreement at a fraction of the simulation cost. An autoregressive Mamba inverse generator is subsequently trained on surrogate-augmented data, treating unit-cell synthesis as a sequential generation task. The resulting one-to-many generative model produces diverse unit cell geometries conditioned on target scattering responses. It achieves CST-validated designs with field transmission magnitude 0.9 across the full 0-$2\pi$ phase range at 20 GHz. Moreover, a CST-calibrated surrogate trained to accurately predict frequency responses (18-22 GHz) enables functional post-selection of inverse generated designs. Together, the hybrid SA-generative methodology in this two-part compilation establishes a scalable and data-efficient solution for multilayer HMS synthesis, with natural extensions toward broadband, oblique-incidence, and higher-dimensional electromagnetic inverse-design problems.

physics.app-ph↗

arXiv2025

SONAR: Spectral-Contrastive Audio Residuals for Generalizable Deepfake Detection

Deepfake (DF) audio detectors still struggle to generalize to out of distribution inputs. A central reason is spectral bias, the tendency of neural networks to learn low-frequency structure before high-frequency (HF) details, which both causes DF generators to leave HF artifacts and leaves those same artifacts under-exploited by common detectors. To address this gap, we propose Spectral-cONtrastive Audio Residuals (SONAR), a frequency-guided framework that explicitly disentangles an audio signal into complementary representations. An XLSR encoder captures the dominant low-frequency content, while the same cloned path, preceded by learnable SRM, value-constrained high-pass filters, distills faint HF residuals. Frequency cross-attention reunites the two views for long- and short-range frequency dependencies, and a frequency-aware Jensen-Shannon contrastive loss pulls real content-noise pairs together while pushing fake embeddings apart, accelerating optimization and sharpening decision boundaries. Evaluated on the ASVspoof 2021 and in-the-wild benchmarks, SONAR attains state-of-the-art performance and converges four times faster than strong baselines. By elevating faint high-frequency residuals to first-class learning signals, SONAR unveils a fully data-driven, frequency-guided contrastive framework that splits the latent space into two disjoint manifolds: natural-HF for genuine audio and distorted-HF for synthetic audio, thereby sharpening decision boundaries. Because the scheme operates purely at the representation level, it is architecture-agnostic and, in future work, can be seamlessly integrated into any model or modality where subtle high-frequency cues are decisive.

cs.SD↗

arXiv2025

L-SR1: Learned Symmetric-Rank-One Preconditioning

End-to-end deep learning has achieved impressive results but often relies on large labeled datasets, exhibits limited generalization to unseen scenarios, and incurs substantial computational cost. Classical optimization methods, in contrast, are more data-efficient and lightweight but frequently suffer from slow convergence. Learned optimizers aim to bridge this gap, yet existing approaches have focused primarily on first-order methods, while learned second-order optimization has received much less attention. We introduce L-SR1, a learned second-order optimizer inspired by the classical Symmetric Rank-One (SR1) method. At its core, L-SR1 employs a Projection-Guided Secant Mechanism (PGSM) that generates positive semi-definite preconditioners and biases meta-training toward the quasi-Newton secant relation. Through controlled analytic benchmarks, we study stability, generalization across problem dimensions, and search direction quality, and further evaluate L-SR1 on Monocular Human Mesh Recovery (HMR), where it outperforms both classical and learned optimization-based baselines. With a compact model and no reliance on task-specific fine-tuning or annotated data, L-SR1 demonstrates strong generalization and can be integrated into a broad range of iterative optimization problems to accelerate convergence and reduce the required number of iterations.

cs.LG↗

arXiv2025

Systole-Conditioned Generative Cardiac Motion

Accurate motion estimation in cardiac computed tomography (CT) imaging is critical for assessing cardiac function and surgical planning. Data-driven methods have become the standard approach for dense motion estimation, but they rely on vast amounts of labeled data with dense ground-truth (GT) motion annotations, which are often unfeasible to obtain. To address this limitation, we present a novel approach that synthesizes realistically looking pairs of cardiac CT frames enriched with dense 3D flow field annotations. Our method leverages a conditional Variational Autoencoder (CVAE), which incorporates a novel multi-scale feature conditioning mechanism and is trained to generate 3D flow fields conditioned on a single CT frame. By applying the generated flow field to warp the given frame, we create pairs of frames that simulate realistic myocardium deformations across the cardiac cycle. These pairs serve as fully annotated data samples, providing optical flow GT annotations. Our data generation pipeline could enable the training and validation of more complex and accurate myocardium motion models, allowing for substantially reducing reliance on manual annotations. Our code, along with animated generated samples and additional material, is available on our project page: https://shaharzuler.github.io/GenerativeCardiacMotion_Page.

eess.IV↗

arXiv2025

Inverse Design of Diffractive Metasurfaces Using Diffusion Models

Metasurfaces are ultra-thin optical elements composed of engineered sub-wavelength structures that enable precise control of light. Their inverse design - determining a geometry that yields a desired optical response - is challenging due to the complex, nonlinear relationship between structure and optical properties. This often requires expert tuning, is prone to local minima, and involves significant computational overhead. In this work, we address these challenges by integrating the generative capabilities of diffusion models into computational design workflows. Using an RCWA simulator, we generate training data consisting of metasurface geometries and their corresponding far-field scattering patterns. We then train a conditional diffusion model to predict meta-atom geometry and height from a target spatial power distribution at a specified wavelength, sampled from a continuous supported band. Once trained, the model can generate metasurfaces with low error, either directly using RCWA-guided posterior sampling or by serving as an initializer for traditional optimization methods. We demonstrate our approach on the design of a spatially uniform intensity splitter and a polarization beam splitter, both produced with low error in under 30 minutes. To support further research in data-driven metasurface design, we publicly release our code and datasets.

physics.optics↗

arXiv2025

A measurement noise scaling law for cellular representation learning

Large genomic and imaging datasets can be used to train models that learn meaningful representations of cellular systems. Across domains, model performance improves predictably with dataset size and compute budget, providing a basis for allocating data and computation. Scientific data, however, is also limited by noise arising from factors such as molecular undersampling, sequencing errors, and image resolution. By fitting 1,670 representation learning models across three data modalities (gene expression, sequence, and image data), we show that noise defines a distinct axis along which performance improves. Noise scaling follows a logarithmic law. We derive the law from a model of noise propagation, and use it to define noise sensitivity and model capacity as benchmarking metrics. We show that protein sequence representations are noise-robust while single cell transcriptomics models are not, with a Transformer-based model showing greater noise robustness but lower saturating performance than a variational autoencoder model. Noise scaling metrics may support future model evaluation and experimental design.

q-bio.QM↗

arXiv2024

CardioSpectrum: Comprehensive Myocardium Motion Analysis with 3D Deep Learning and Geometric Insights

The ability to map left ventricle (LV) myocardial motion using computed tomography angiography (CTA) is essential to diagnosing cardiovascular conditions and guiding interventional procedures. Due to their inherent locality, conventional neural networks typically have difficulty predicting subtle tangential movements, which considerably lessens the level of precision at which myocardium three-dimensional (3D) mapping can be performed. Using 3D optical flow techniques and Functional Maps (FMs), we present a comprehensive approach to address this problem. FMs are known for their capacity to capture global geometric features, thus providing a fuller understanding of 3D geometry. As an alternative to traditional segmentation-based priors, we employ surface-based two-dimensional (2D) constraints derived from spectral correspondence methods. Our 3D deep learning architecture, based on the ARFlow model, is optimized to handle complex 3D motion analysis tasks. By incorporating FMs, we can capture the subtle tangential movements of the myocardium surface precisely, hence significantly improving the accuracy of 3D mapping of the myocardium. The experimental results confirm the effectiveness of this method in enhancing myocardium motion analysis. This approach can contribute to improving cardiovascular diagnosis and treatment. Our code and additional resources are available at: https://shaharzuler.github.io/CardioSpectrumPage

eess.IV↗

arXiv2024

Synthetic Data Generation for 3D Myocardium Deformation Analysis

Accurate analysis of 3D myocardium deformation using high-resolution computerized tomography (CT) datasets with ground truth (GT) annotations is crucial for advancing cardiovascular imaging research. However, the scarcity of such datasets poses a significant challenge for developing robust myocardium deformation analysis models. To address this, we propose a novel approach to synthetic data generation for enriching cardiovascular imaging datasets. We introduce a synthetic data generation method, enriched with crucial GT 3D optical flow annotations. We outline the data preparation from a cardiac four-dimensional (4D) CT scan, selection of parameters, and the subsequent creation of synthetic data from the same or other sources of 3D cardiac CT data for training. Our work contributes to overcoming the limitations imposed by the scarcity of high-resolution CT datasets with precise annotations, thereby facilitating the development of accurate and reliable myocardium deformation analysis algorithms for clinical applications and diagnostics. Our code is available at: http://www.github.com/shaharzuler/cardio_volume_skewer

cs.CV↗

arXiv2024

Cost Function Unrolling in Unsupervised Optical Flow

Steepest descent algorithms, which are commonly used in deep learning, use the gradient as the descent direction, either as-is or after a direction shift using preconditioning. In many scenarios calculating the gradient is numerically hard due to complex or non-differentiable cost functions, specifically next to singular points. In this work we focus on the derivation of the Total Variation semi-norm commonly used in unsupervised cost functions. Specifically, we derive a differentiable proxy to the hard L1 smoothness constraint in a novel iterative scheme which we refer to as Cost Unrolling. Producing more accurate gradients during training, our method enables finer predictions of a given DNN model through improved convergence, without modifying its architecture or increasing computational complexity. We demonstrate our method in the unsupervised optical flow task. Replacing the L1 smoothness constraint with our unrolled cost during the training of a well known baseline, we report improved results on both MPI Sintel and KITTI 2015 unsupervised optical flow benchmarks. Particularly, we report EPE reduced by up to 15.82% on occluded pixels, where the smoothness constraint is dominant, enabling the detection of much sharper motion edges.

cs.CV↗

arXiv2022

Temporal Super-Resolution using Multi-Channel Illumination Source

While sensing in high temporal resolution is necessary for wide range of application, it is still limited nowadays due to cameras sampling rate. In this work we try to increase the temporal resolution beyond the Nyquist frequency, which is limited by the sampling rate of the sensor. This work establishes a novel approach for Temporal-Super-Resolution that uses the object reflecting properties from an active illumination source to go beyond this limit. Following theoretical derivation, we demonstrate how we can increase the temporal spectral detected range by a factor of 6 and possibly even more. Our method is supported by simulations and experiments and we demonstrate as an application, how we use our method to improve in about factor two the accuracy of object motion estimation.

eess.SP↗

arXiv2022

Illumination-Based Color Reconstruction for the Dynamic Vision Sensor

This work demonstrates a novel, state of the art method to reconstruct colored images via the Dynamic Vision Sensor (DVS). The DVS is an image sensor that indicates only a binary change in brightness, with no information about the captured wavelength (color), or intensity level. We present a novel method to reconstruct a full spatial resolution colored image with the DVS and an active colored light source. We analyze the DVS response and present two reconstruction algorithms: Linear based and Convolutional Neural Network Based. In addition, we demonstrate our algorithm robustness to changes in environmental conditions such as illumination and distance. Finally, comparing with previous works, we show how we reach the state of the art results.

eess.IV↗

arXiv2022

Learn2Reg: comprehensive multi-task medical image registration challenge, dataset and evaluation in the era of deep learning

Image registration is a fundamental medical image analysis task, and a wide variety of approaches have been proposed. However, only a few studies have comprehensively compared medical image registration approaches on a wide range of clinically relevant tasks. This limits the development of registration methods, the adoption of research advances into practice, and a fair benchmark across competing approaches. The Learn2Reg challenge addresses these limitations by providing a multi-task medical image registration data set for comprehensive characterisation of deformable registration algorithms. A continuous evaluation will be possible at https://learn2reg.grand-challenge.org. Learn2Reg covers a wide range of anatomies (brain, abdomen, and thorax), modalities (ultrasound, CT, MR), availability of annotations, as well as intra- and inter-patient registration evaluation. We established an easily accessible framework for training and validation of 3D registration methods, which enabled the compilation of results of over 65 individual method submissions from more than 20 unique teams. We used a complementary set of metrics, including robustness, accuracy, plausibility, and runtime, enabling unique insight into the current state-of-the-art of medical image registration. This paper describes datasets, tasks, evaluation methods and results of the challenge, as well as results of further analysis of transferability to new datasets, the importance of label supervision, and resulting bias. While no single approach worked best across all tasks, many methodological aspects could be identified that push the performance of medical image registration to new state-of-the-art performance. Furthermore, we demystified the common belief that conventional registration methods have to be much slower than deep-learning-based methods.

eess.IV↗

arXiv2022

Unsupervised Scale-Invariant Multispectral Shape Matching

Alignment between non-rigid stretchable structures is one of the most challenging tasks in computer vision, as the invariant properties are hard to define, and there is no labeled data for real datasets. We present unsupervised neural network architecture based upon the spectral domain of scale-invariant geometry. We build on top of the functional maps architecture, but show that learning local features, as done until now, is not enough once the isometry assumption breaks. We demonstrate the use of multiple scale-invariant geometries for solving this problem. Our method is agnostic to local-scale deformations and shows superior performance for matching shapes from different domains when compared to existing spectral state-of-the-art solutions.

cs.CV↗

arXiv2022

Geometry Enhancements from Visual Content: Going Beyond Ground Truth

This work presents a new cyclic architecture that extracts high-frequency patterns from images and re-insert them as geometric features. This procedure allows us to enhance the resolution of low-cost depth sensors capturing fine details on the one hand and being loyal to the scanned ground truth on the other. We present state-of-the-art results for depth super-resolution tasks and as well as visually attractive, enhanced generated 3D models.

cs.CV↗

arXiv2022

Shape-consistent Generative Adversarial Networks for multi-modal Medical segmentation maps

Image translation across domains for unpaired datasets has gained interest and great improvement lately. In medical imaging, there are multiple imaging modalities, with very different characteristics. Our goal is to use cross-modality adaptation between CT and MRI whole cardiac scans for semantic segmentation. We present a segmentation network using synthesised cardiac volumes for extremely limited datasets. Our solution is based on a 3D cross-modality generative adversarial network to share information between modalities and generate synthesized data using unpaired datasets. Our network utilizes semantic segmentation to improve generator shape consistency, thus creating more realistic synthesised volumes to be used when re-training the segmentation network. We show that improved segmentation can be achieved on small datasets when using spatial augmentations to improve a generative adversarial network. These augmentations improve the generator capabilities, thus enhancing the performance of the Segmentor. Using only 16 CT and 16 MRI cardiovascular volumes, improved results are shown over other segmentation methods while using the suggested architecture.

eess.IV↗

arXiv2022

Deep Confidence Guided Distance for 3D Partial Shape Registration

We present a novel non-iterative learnable method for partial-to-partial 3D shape registration. The partial alignment task is extremely complex, as it jointly tries to match between points and identify which points do not appear in the corresponding shape, causing the solution to be non-unique and ill-posed in most cases. Until now, two principal methodologies have been suggested to solve this problem: sample a subset of points that are likely to have correspondences or perform soft alignment between the point clouds and try to avoid a match to an occluded part. These heuristics work when the partiality is mild or when the transformation is small but fails for severe occlusions or when outliers are present. We present a unique approach named Confidence Guided Distance Network (CGD-net), where we fuse learnable similarity between point embeddings and spatial distance between point clouds, inducing an optimized solution for the overlapping points while ignoring parts that only appear in one of the shapes. The point feature generation is done by a self-supervised architecture that repels far points to have different embeddings, therefore succeeds to align partial views of shapes, even with excessive internal symmetries or acute rotations. We compare our network to recently presented learning-based and axiomatic methods and report a fundamental boost in performance.

cs.CV↗