arXiv subjects

Daniel Assumpcao

Publications and source records attributed to Daniel Assumpcao.

6 recordsLinked to original sources

arXiv2025

A sub-volt near-IR lithium tantalate electro-optic modulator

We demonstrate a low-loss integrated electro-optic Mach-Zehnder modulator in thin-film lithium tantalate at 737 nm, featuring a low half-wave voltage-length product of 0.65 V$\cdot$cm, an extinction ratio of 30 dB, low optical loss of 5.3 dB, and a detector-limited bandwidth of 20 GHz. A small $<2$ dB DC bias drift relative to quadrature bias is measured over 16 minutes using 4.3 dBm of on-chip power in ambient conditions, which outperforms the 8 dB measured using a counterpart thin-film lithium niobate modulator. Finally, an optical loss coefficient of 0.5 dB/cm for a thin-film lithium tantalate waveguide is estimated at 638 nm using a fabricated ring resonator.

physics.optics↗

arXiv2024

Integrated lithium niobate photonic computing circuit based on efficient and high-speed electro-optic conversion

Here we show a photonic computing accelerator utilizing a system-level thin-film lithium niobate circuit which overcomes this limitation. Leveraging the strong electro-optic (Pockels) effect and the scalability of this platform, we demonstrate photonic computation at speeds up to 1.36 TOPS while consuming 0.057 pJ/OP. Our system features more than 100 thin-film lithium niobate high-performance components working synergistically, surpassing state-of-the-art systems on this platform. We further demonstrate binary-classification, handwritten-digit classification, and image classification with remarkable accuracy, showcasing our system's capability of executing real algorithms. Finally, we investigate the opportunities offered by combining our system with a hybrid-integrated distributed feedback laser source and a heterogeneous-integrated modified uni-traveling carrier photodiode. Our results illustrate the promise of thin-film lithium niobate as a computational platform, addressing current bottlenecks in both electronic and photonic computation. Its unique properties of high-performance electro-optic weight encoding and conversion, wafer-scale scalability, and compatibility with integrated lasers and detectors, position thin-film lithium niobate photonics as a valuable complement to silicon photonics, with extensions to applications in ultrafast and power-efficient signal processing and ranging.

physics.optics↗

arXiv2024

Stable electro-optic modulators using thin-film lithium tantalate

We demonstrate electro-optic modulators realized in low-loss thin-film lithium tantalate with superior DC-stability (<1 dB power fluctuation from quadrature with 12.1 dBm input) compared to equivalent thin-film lithium niobate modulators (5 dB fluctuation) over 46 hours.

physics.optics↗

arXiv2024

A Thin Film Lithium Niobate Near-Infrared Platform for Multiplexing Quantum Nodes

Practical quantum networks will require quantum nodes consisting of many memory qubits. This in turn will increase the complexity of the photonic circuits needed to control each qubit and will require strategies to multiplex memories and overcome the inhomogeneous distribution of their transition frequencies. Integrated photonics operating at visible to near-infrared (VNIR) wavelength range, compatible with the transition frequencies of leading quantum memory systems, can provide solutions to these needs. In this work, we realize a VNIR thin-film lithium niobate (TFLN) integrated photonics platform with the key components to meet these requirements. These include low-loss couplers ($<$ 1 dB/facet), switches ($>$ 20 dB extinction), and high-bandwidth electro-optic modulators ($>$ 50 GHz). With these devices we demonstrate high-efficiency and CW-compatible frequency shifting ($>$ 50 $\%$ efficiency at 15 GHz), as well as simultaneous laser amplitude and frequency control through a nested modulator structure. Finally, we highlight an architecture for multiplexing quantum memories using the demonstrated TFLN components, and outline how this platform can enable a 2-order of magnitude improvement in entanglement rates over single memory nodes. Our results demonstrate that TFLN can meet the necessary performance and scalability benchmarks to enable large-scale quantum nodes.

physics.optics↗

arXiv2024

Integrated electro-optics on thin-film lithium niobate

Electro-optics serves as the crucial bridge between electronics and photonics, unlocking a wide array of applications ranging from communications and computing to sensing and quantum information. Integrated electro-optics approaches in particular enable essential electronic high-speed control for photonics while offering substantial photonic parallelism for electronics. Recent strides in thin-film lithium niobate photonics have ushered revolutionary advancements in electro-optics. This technology not only offers the requisite strong electro-optic coupling but also boasts ultra-low optical loss and high microwave bandwidth. Further, its tight confinement and compatibility with nanofabrication allow for unprecedented reconfigurability and scalability, facilitating the creation of novel and intricate devices and systems that were once deemed nearly impossible in bulk systems. Building upon this platform, the field has witnessed the emergence of various groundbreaking electro-optic devices surpassing the current state of the art, and introducing functionalities that were previously non-existent. This technological leap forward provides a unique framework to explore various realms of physics as well, including photonic non-Hermitian synthetic dimensions, active topological physics, and quantum electro-optics. In this review, we present the fundamental principles of electro-optics, drawing connections between fundamental science and the forefront of technology. We discuss the accomplishments and future prospects of integrated electro-optics, enabled by thin-film lithium niobate platform.

physics.optics↗

arXiv2023

Cryogenic packaging of nanophotonic devices with a low coupling loss < 1 dB

Robust, low-loss photonic packaging of on-chip nanophotonic circuits is a key enabling technology for the deployment of integrated photonics in a variety of classical and quantum technologies including optical communications and quantum communications, sensing, and transduction. To date, no process has been established that enables permanent, broadband, and cryogenically-compatible coupling with sub-dB losses from optical fibers to nanophotonic circuits. Here we report a technique for reproducibly generating a permanently packaged interface between a tapered optical fiber and nanophotonic devices with a record-low coupling loss < 1 dB per facet at near-infrared wavelengths (~730 nm) that remains stable from 300 K to 30 mK. We further demonstrate the compatibility of this technique with etched lithium niobate on insulator waveguides. The technique lifts performance limitations imposed by scattering as light transfers between photonic devices and optical fibers, paving the way for scalable integration of photonic technologies at both room and cryogenic temperatures.

physics.optics↗