arXiv subjects

Daniel Bonamy

Publications and source records attributed to Daniel Bonamy.

31 records · Page 2Linked to original sources

arXiv2013

Damage mechanisms in the dynamic fracture of nominally brittle polymers

Linear Elastic Fracture Mechanics (LEFM) provides a consistent framework to evaluate quantitatively the energy flux released to the tip of a growing crack. Still, the way in which the crack selects its velocity in response to this energy flux remains far from completely understood. To uncover the underlying mechanisms, we experimentally studied damage and dissipation processes that develop during the dynamic failure of polymethylmethacrylate (PMMA), classically considered as the archetype of brittle amorphous materials. We evidenced a well-defined critical velocity along which failure switches from nominally-brittle to quasi-brittle, where crack propagation goes hand in hand with the nucleation and growth of microcracks. Via post-mortem analysis of the fracture surfaces, we were able to reconstruct the complete spatiotemporal microcracking dynamics with micrometer/nanosecond resolution. We demonstrated that the true local propagation speed of individual crack fronts is limited to a fairly low value, which can be much smaller than the apparent speed measured at the continuum-level scale. By coalescing with the main front, microcracks boost the macroscale velocity through an acceleration factor of geometrical origin. We discuss the key role of damage-related internal variables in the selection of macroscale fracture dynamics.

cond-mat.mtrl-sci↗

arXiv2012

Understanding fast macroscale fracture from microcrack post mortem patterns

Dynamic crack propagation drives catastrophic solid failures. In many amorphous brittle materials, sufficiently fast crack growth involves small-scale, high-frequency microcracking damage localized near the crack tip. The ultra-fast dynamics of microcrack nucleation, growth and coalescence is inaccessible experimentally and fast crack propagation was therefore studied only as a macroscale average. Here, we overcome this limitation in polymethylmethacrylate, the archetype of brittle amorphous materials: We reconstruct the complete spatio-temporal microcracking dynamics, with micrometer / nanosecond resolution, through post mortem analysis of the fracture surfaces. We find that all individual microcracks propagate at the same low, load-independent, velocity. Collectively, the main effect of microcracks is not to slow down fracture by increasing the energy required for crack propagation, as commonly believed, but on the contrary to boost the macroscale velocity through an acceleration factor selected on geometric grounds. Our results emphasize the key role of damage-related internal variables in the selection of macroscale fracture dynamics.

cond-mat.mtrl-sci↗

arXiv2011

Origin and tailoring of the antiferromagnetic domain structure in $α$-Fe$_2$O$_3$ thin films unraveled by statistical analysis of dichroic spectro-microscopy (X-PEEM) images

The magnetic microstructure and domain wall distribution of antiferromagnetic $α$-Fe$_2$O$_3$ epitaxial layers is determined by statistical image analyses. Using dichroic spectro-microscopy images, we demonstrate that the domain structure is statistically invariant with thickness and that the antiferromagnetic domain structure of the thin films is inherited from the ferrimagnetic precursor layer one, even after complete transformation into antiferromagnetic $α$-Fe$_2$O$_3$. We show that modifying the magnetic domain structure of the precursor layer is a genuine way to tune the magnetic domain structure and domain walls of the antiferromagnetic layers.

cond-mat.mtrl-sci↗

arXiv2010

Scaling and universality in the kinetic smoothening of interfaces: Application to the analysis of the relaxation of rough vicinal steps of an oxide surface

Relaxation of initially out-of-equilibrium rough interfaces in presence of thermal noise is investigated using Langevin formalism. During thermal equilibration towards the well-known roughening regime, three scaling regimes observed over three successive ranges of length-scales are evidenced: thermal roughening (late stage) at small scales, transient smoothening at intermediate scales and remnant of the initial conditions at large scales. A generalization of the Family-Vicsek scaling is found for the smoothening regime. A distinctive feature of the transient smoothening regime resides in the existence of a super-universal exponent, i.e. independent of the considered model. This approach allows interpreting a series of AFM images of sapphire surfaces showing the thermal evolution of initially rough step edges.

cond-mat.stat-mech↗

arXiv2010

Brittle/quasi-brittle transition in dynamic fracture: An energetic signature

Dynamic fracture experiments were performed in PMMA over a wide range of velocities and reveal that the fracture energy exhibits an abrupt 3-folds increase from its value at crack initiation at a well-defined critical velocity, below the one associated to the onset of micro-branching instability. This transition is associated with the appearance of conics patterns on fracture surfaces that, in many materials, are the signature of damage spreading through the nucleation and growth of microcracks. A simple model allows to relate both the energetic and fractographic measurements. These results suggest that dynamic fracture at low velocities in amorphous materials is controlled by the brittle/quasi-brittle transition studied here.

physics.class-ph↗

arXiv2009

French Roadmap for complex Systems 2008-2009

This second issue of the French Complex Systems Roadmap is the outcome of the Entretiens de Cargese 2008, an interdisciplinary brainstorming session organized over one week in 2008, jointly by RNSC, ISC-PIF and IXXI. It capitalizes on the first roadmap and gathers contributions of more than 70 scientists from major French institutions. The aim of this roadmap is to foster the coordination of the complex systems community on focused topics and questions, as well as to present contributions and challenges in the complex systems sciences and complexity science to the public, political and industrial spheres.

nlin.AO↗

arXiv2008

Crackling dynamics in material failure as the signature of a self-organized dynamic phase transition

We derive here a linear elastic stochastic description for slow crack growth in heterogeneous materials. This approach succeeds in reproducing quantitatively the intermittent crackling dynamics observed recently during the slow propagation of a crack along a weak heterogeneous plane of a transparent Plexiglas block [Måløy {\it et al.}, PRL {\bf 96} 045501]. In this description, the quasi-static failure of heterogeneous media appears as a self-organized critical phase transition. As such, it exhibits universal and to some extent predictable scaling laws, analogue to that of other systems like for example magnetization noise in ferromagnets.

cond-mat.stat-mech↗

arXiv2006

Cleaved surface of i-AlPdMn quasicrystals: Influence of the local temperature elevation at the crack tip on the fracture surface roughness

Roughness of i-AlPdMn cleaved surfaces are presently analysed. From the atomic scale to 2-3 nm, they are shown to exhibit scaling properties hiding the cluster (0.45 nm) aperiodic structure. These properties are quantitatively similar to those observed on various disordered materials, albeit on other ranges of length scales. These properties are interpreted as the signature of damage mechanisms occurring within a 2-3 nm wide zone at the crack tip. The size of this process zone finds its origin in the local temperature elevation at the crack tip. For the very first time, this effect is reported to be responsible for a transition from a perfectly brittle behavior to a nanoductile one.

cond-mat.stat-mech↗

arXiv2006

Nanoscale damage during fracture in silica glass

We report here atomic force microscopy experiments designed to uncover the nature of failure mechanisms occuring within the process zone at the tip of a crack propagating into a silica glass specimen under stress corrosion. The crack propagates through the growth and coalescence of nanoscale damage spots. This cavitation process is shown to be the key mechanism responsible for damage spreading within the process zone. The possible origin of the nucleation of cavities, as well as the implications on the selection of both the cavity size at coalescence and the process zone extension are finally discussed.

cond-mat.stat-mech↗

arXiv2006

Scaling exponents for fracture surfaces in homogenous glass and glassy ceramics

We investigate the scaling properties of post-mortem fracture surfaces in silica glass and glassy ceramics. In both cases, the 2D height-height correlation function is found to obey Family-Viseck scaling properties, but with two sets of critical exponents, in particular a roughness exponent $ζ\simeq 0.75$ in homogeneous glass and $ζ\simeq 0.4$ in glassy ceramics. The ranges of length-scales over which these two scalings are observed are shown to be below and above the size of process zone respectively. A model derived from Linear Elastic Fracture Mechanics (LEFM) in the quasistatic approximation succeeds to reproduce the scaling exponents observed in glassy ceramics. The critical exponents observed in homogeneous glass are conjectured to reflect damage screening occurring for length-scales below the size of the process zone.

cond-mat.stat-mech↗

arXiv2006

Anisotropic self-affine properties of experimental fracture surfaces

The scaling properties of post-mortem fracture surfaces of brittle (silica glass), ductile (aluminum alloy) and quasi-brittle (mortar and wood) materials have been investigated. These surfaces, studied far from the initiation, were shown to be self-affine. However, the Hurst exponent measured along the crack direction is found to be different from the one measured along the propagation direction. More generally, a complete description of the scaling properties of these surfaces call for the use of the 2D height-height correlation function that involves three exponents zeta = 0.75, beta = 0.6 and z = 1.25 independent of the material considered as well as of the crack growth velocity. These exponents are shown to correspond to the roughness, growth and dynamic exponents respectively, as introduced in interface growth models. They are conjectured to be universal.

cond-mat.stat-mech↗

arXiv2006

Two-dimensional scaling properties of experimental fracture surfaces

The morphology of fracture surfaces encodes the various complex damage and fracture processes occurring at the microstructure scale that have lead to the failure of a given heterogeneous material. Understanding how to decipher this morphology is therefore of fundamental interest. This has been extensively investigated over these two last decades. It has been established that 1D profiles of these fracture surfaces exhibit properties of scaling invariance. In this paper, we present deeper analysis and investigate the 2D scaling properties of these fracture surfaces. We showed that the properties of scaling invariance are anisotropic and evidenced the existence of two peculiar directions on the post-mortem fracture surface caracterized by two different scaling exponents: the direction of the crack growth and the direction of the crack front. These two exponents were found to be universal, independent of the crack growth velocity, in both silica glass and aluminum alloy, archetype of brittle and ductile material respectively. Moreover, the 2D structure function that fully characterizes the scaling properties of the fracture surface was shown to take a peculiar form similar to the one predicted by some models issued from out-of-equilibrium statistical physics. This suggest some promising analogies between dynamic phase transition models and the stability of a crack front pinned/unpinned by the heterogenities of the material.

cond-mat.stat-mech↗

arXiv2005

Numerical simulation of 2D steady granular flows in rotating drum: On surface flows rheology

The rheology of 2D steady surface flow of cohesionless cylinders in a rotating drum is investigated through {\em Non Smooth Contact Dynamics} simulations. Profile of volume fraction, translational and angular velocity, rms velocity, strain rate and stress tensor were measured at the midpoint along the length of the surface flowing layer where the flow is generally considered as steady and homogeneous. Analysis of these data and their inter-relations suggest the local inertial number - defined as the ratio between local inertial forces and local confinement forces - to be the relevant dimensionless parameter to describe the transition from the quasi-static part of the packing to the flowing part at the surface of the heap. Variations of the components of the stress tensor as well as the ones of rms velocity as a function of the inertial number are analysed within both the quasi-static and the flowing phases. Their implications are discussed.

cond-mat.soft↗