arXiv subjects

Daniel Bonn

Publications and source records attributed to Daniel Bonn.

At least 37 records · Page 2Linked to original sources

arXiv2024

Beware of CaBER: Filament thinning rheometry does not always give `the' relaxation time of polymer solutions

The viscoelastic relaxation time of a polymer solution is often measured using Capillary Breakup Extensional Rheometry (CaBER) where a droplet is placed between two plates which are pulled apart to form a thinning filament. For a slow plate retraction protocol, required to avoid inertio-capillary oscillations for low-viscosity liquids, we show experimentally that the CaBER relaxation time $τ_e$ inferred from the exponential thinning regime is in fact an apparent relaxation time that may increase significantly when increasing the plate diameter and the droplet volume. Similarly, we observe that $τ_e$ increases with the plate diameter for the classical step-strain plate separation protocol of a commercial (Haake) CaBER device and increases with the nozzle diameter for a Dripping-onto-Substrate (DoS) method. This dependence on the flow history before the formation of the viscoelastic filament is in contradiction with polymer models such as Oldroyd-B that predict a filament thinning rate $1/3τ$ ($τ$ being the model's relaxation time) which is a material property independent of geometrical factors. We show that this is not due to artefacts such as solvent evaporation or polymer degradation and that it can only be rationalised by finite extensibility effects (FENE-P model) for a dilute polymer solution in a viscous solvent, but not for semi-dilute solutions in a low-viscosity solvent.

cond-mat.soft↗

arXiv2024

Thermal properties of athermal granular materials

Dry granular materials consist of a vast ensemble of discrete solid particles, interacting through complex frictional forces at the contact points. The particles are so large that these systems are believed to be completely athermal. Here, we arrest the dynamics of a flowing granular material in a steady-state flow configuration, enabling an isolated examination of aging at the particle contacts without granular rearrangements. Our findings reveal that the evolution of interparticle forces within the arrested athermal granular network results in the spontaneous increase of the system's yield stress. This strengthening process is logarithmic in time with a rate that depends on temperature. We demonstrate that the material's stress relaxation exhibits similar time- and temperature-dependent behavior, suggesting a shared origin for aging and stress relaxation in these systems governed by thermal molecular processes at the scale of the grain contacts.

cond-mat.soft↗

arXiv2023

Ductile-to-brittle transition and yielding in soft amorphous materials: perspectives and open questions

Soft amorphous materials are viscoelastic solids ubiquitously found around us, from clays and cementitious pastes to emulsions and physical gels encountered in food or biomedical engineering. Under an external deformation, these materials undergo a noteworthy transition from a solid to a liquid state that reshapes the material microstructure. This yielding transition was the main theme of a workshop held from January 9 to 13, 2023 at the Lorentz Center in Leiden. The manuscript presented here offers a critical perspective on the subject, synthesizing insights from the various brainstorming sessions and informal discussions that unfolded during this week of vibrant exchange of ideas. The result of these exchanges takes the form of a series of open questions that represent outstanding experimental, numerical, and theoretical challenges to be tackled in the near future.

cond-mat.soft↗

arXiv2023

Droplet Size Distribution in Emulsions

The droplet size in emulsions is known to affect the rheological properties and plays a crucial role in the many applications of emulsions. Despite its importance, the underlying mechanisms governing droplet size in emulsification remain poorly understood. We investigate the average drop size and size distribution upon emulsification with a high-shear mixer for model oil-in-water emulsions stabilized by a surfactant. The size distribution is found to be a log-normal distribution, resulting from the repetitive random breakup of drops. High-shear emulsification, the usual way of making emulsions, is therefore found to be very different from turbulent emulsification given by the Kolmogorov-Hinze theory for which power-law distributions of the drop size are expected. In agreement with this, the mean droplet size does not follow a scaling with the Reynolds number of the emulsification flow, but rather a capillary number scaling based on the viscosity of the continuous phase.

cond-mat.soft↗

arXiv2023

Perturbation-induced granular fluidization as a model for remote earthquake triggering

Studying the effect of mechanical perturbations on granular systems is crucial for understanding soil stability, avalanches, and earthquakes. We investigate a granular system as a laboratory proxy for fault gouge. When subjected to a slow shear, granular materials typically exhibit a stress overshoot before reaching a steady state. We find that short seismic pulses can reset a granular system flowing in steady state so that the stress overshoot is regenerated. This new feature is shown to determine the stability of the granular system under different applied stresses in the wake of a perturbation pulse and the resulting dynamics when it fails. Using an analytical aging-rejuvenation model for describing the overshoot response, we show that our laboratory-derived theoretical framework, can quantitatively explain data from two fault slip events triggered by seismic waves.

cond-mat.soft↗

arXiv2023

Surface-Mediated Molecular Transport of a Lipophilic Fluorescent Probe in Polydisperse Oil-in-Water Emulsions

Emulsions often act as carriers for water-insoluble solutes that are delivered to a specific target. The molecular transport of solutes in emulsions can be facilitated by surfactants and is often limited by diffusion through the continuous phase. We here investigate this transport on a molecular scale by using a lipophilic molecular rotor as a proxy for solutes. Using fluorescence lifetime microscopy we track the transport of these molecules from the continuous phase towards the dispersed phase in polydisperse oil-in-water emulsions. We show that this transport comprises two timescales, which vary significantly with droplet size and surfactant concentration, and, depending on the type of surfactant used, can be limited either by transport across the oil-water interface, or by diffusion through the continuous phase. By studying the time-resolved fluorescence of the fluorophore, accompanied by molecular dynamics simulations, we demonstrate how the rate of transport observed on a macroscopic scale can be explained in terms of the local environment that the probe molecules are exposed to.

cond-mat.soft↗

arXiv2023

Reconciling airborne disease transmission concerns with energy saving requirements: the potential of UV-C pathogen deactivation and air distribution optimization

The COVID-19 pandemic caused a paradigm shift in our way of using heating, ventilation, and air-conditioning (HVAC) systems in buildings. In the early stages of the pandemic, it was indeed advised to reduce the reuse and thus the recirculation of indoor air to minimize the risk of contamination through inhalation of virus-laden aerosol particles emitted by humans when coughing, sneezing, speaking or breathing. However, such recommendations are not compatible with energy saving requirements stemming from climate change and energy price increase concerns, especially in winter and summer when the fraction of outdoor air supplied to the building needs to be significantly heated or cooled down. In this experimental study, we aim at providing low-cost and low-energy solutions to modify the ventilation strategies currently used in many buildings to reduce the risk of respiratory disease transmission. We find that ultraviolet germicidal irradiation (UVGI) modules added to the HVAC system are very efficient at inactivating pathogens present in aerosols, leading to good indoor air quality even with significant indoor air recirculation. Moreover, we show that an optimal placement of the air exhaust vents relative to air supply vents can improve the ventilation efficiency, with significant consequences in terms of energy savings.

physics.soc-ph↗

arXiv2022

Quantitative understanding of the onset of dense granular flows

The question when and how dense granular materials start to flow under stress, despite many industrial and geophysical applications, remains largely unresolved. We develop and test a simple equation for the onset of quasi-static flows of granular materials which is based on the frictional aging of the granular packing. The result is a non-monotonic stress-strain relation which - akin to classical friction - is independent of the shear rate. This relation suffices to understand the below-threshold deformations of aging granular media, and its solid-to-liquid transition. Our results also elucidate the (flow) history dependence of the mechanical properties, and the sensitivity to initial preparation of granular media.

cond-mat.soft↗

arXiv2022

Floppy hydrated salt microcrystals

The crystalline structure of minerals due to the highly ordered assembly of its constituent atoms, ions or molecules confers a considerable hardness and brittleness to the materials. As a result, they are generally subject to fracture. Here we report that microcrystals of natural inorganic salt hydrates such as sodium sulfate decahydrate (Na2SO4.10H2O) and magnesium sulfate hexahydrate (MgSO4.6H2O) can behave remarkably differently: instead of having a defined faceted geometrical shape and being hard or brittle, they lose their facets and become soft and deformable when in contact with their saturated salt solution at their deliquescence point. As a result, the hydrated crystals simultaneously behaves as crystalline and liquid-like. We show that the observed elasticity is a consequence of a trade-off between the excess capillary energy introduced by the deformation from the equilibrium shape and viscous flow over the surface of the microcrystals. This surprising, unusual mechanical properties reported here reveals the role of the water molecules present in the crystalline structure. Although many compounds can incorporate water molecules in their crystalline frameworks, the relationship between the different hydrates and anhydrate crystal forms are still poorly investigated. Our results on the floppy behaviour of such crystalline structure reveals some unexplored properties of water molecules entrapped in the crystalline structure and can open novel routes for their application in various fields such as pharmaceutical sciences, thermal energy storage and even the traceability of water on Mars.

cond-mat.soft↗

arXiv2022

Molecular rotors to probe the local viscosity of a polymer glass

We investigate the local viscosity of a polymer glass around its glass transition temperature using environment-sensitive fluorescent molecular rotors embedded in the polymer matrix. The rotors' fluorescence depends on the local viscosity, and measuring the fluorescence intensity and lifetime of the probe therefore allows to measure the local free volume in the polymer glass when going through the glass transition. This also allows us to study the local viscosity and free volume when the polymer film is put under an external stress. We find that the film does not flow homogeneously, but undergoes shear banding that is visible as a spatially varying free volume and viscosity.

cond-mat.soft↗

arXiv2022

Predicting frictional ageing from bulk relaxation measurements

The coefficient of static friction between solids generally depends on the time they have remained in static contact before the measurement. Such frictional aging is at the origin of the difference between static and dynamic friction coefficients, but has remained difficult to understand. It is usually attributed to a slow increase in the area of atomic contact as the interface changes under pressure. This is however very difficult to quantify as surfaces have roughness at all length scales, and friction is not always proportional to the contact area. Here, we show that plastic flow of surface irregularities within a polymer-on-glass frictional interface exhibits identical relaxation dynamics as that of the bulk, allowing to predict the rate of frictional aging.

cond-mat.soft↗

arXiv2022

Universal aspects of droplet spreading dynamics in Newtonian and non-Newtonian Fluids

Droplet impacts are common in many applications such as coating, spraying, or printing; understanding how droplets spread after impact is thus of utmost importance. Such impacts may occur with different velocities on a variety of substrates. The fluids may also be non-Newtonian and thus possess different rheological properties. How the different properties such as surface roughness and wettability, droplet viscosity and rheology as well as interfacial properties affect the spreading dynamics of the droplets and the eventual drop size after impact are unresolved questions. Most recent work focuses on the maximum spreading diameter after impact and uses scaling laws to predict this. In this paper we show that a proper rescaling of the spreading dynamics with the maximum radius attained by the drop, and the impact velocity leads to a unique single and thus universal curve for the variation of diameter versus time. The validity of this universal functional shape is validated for different liquids with different rheological properties as well as substrates with different wettabilities. This universal function agrees with a recent model that proposes a closed set of differential equations for the spreading dynamics of droplets.

physics.flu-dyn↗

arXiv2022

Transition from viscoelastic to fracture-like peeling of pressure-sensitive adhesives

We investigate the process of the slow unrolling of a roll of typical pressure-sensitive adhesive, Scotch tape, under its own weight. Probing the peeling velocities down to nm/s resolution, which is three orders of magnitudes lower than earlier measurements, we find that the speed is still non-zero. Moreover, the velocity is correlated to the relative humidity. A humidity increase leads to water uptake, making the adhesive weaker and easier to peel. At very low humidity, the adhesive becomes so stiff that it mainly responds elastically, leading to a peeling process akin to interfacial fracture. We provide a quantitative understanding of the peeling velocity in the two regimes.

cond-mat.soft↗

arXiv2021

Self-Healing Behavior of Ice

We show that the surface of ice is self-healing: micrometer deep scratches in the ice surface spontaneously disappear by relaxation on a time scale of roughly an hour. Following the dynamics and comparing it to different mass transfer mechanisms, we find that sublimation from and condensation onto the ice surface is the dominant self-healing mechanism. The self-healing kinetics shows a strong temperature dependence, following an Arrhenius behavior with an activation energy of $ΔE = 58.6 \pm 4.6$ kJ/mole, agreeing with the proposed sublimation mechanism, and at odds with surface diffusion or fluid flow or evaporation-condensation from a quasi-liquid layer.

physics.chem-ph↗

arXiv2021

Non-monotonic dynamics in the onset of frictional slip

The transition from static to dynamic friction is often described as a fracture-like instantaneous slip. However, studies on slow sliding processes aimed at understanding frictional instabilities and earthquakes report slow friction transients that are usually explained by empirical rate-and-state formulations. We perform very slow ($\sim nm/s$) macroscopic-scale sliding experiments and show that the onset of frictional slip is governed by continuous non-monotonic dynamics originating from a competition between contact aging and shear-induced rejuvenation. This allows to describe both our non-monotonic dynamics and the simpler rate-and-state transients with a single evolution equation.

cond-mat.soft↗

arXiv2021

Emulsion Destabilization by Squeeze Flow

There is a large debate on the destabilization mechanism of emulsions. We present a simple technique using mechanical compression to destabilize oil-in-water emulsions. Upon compression of the emulsion, the continuous aqueous phase is squeezed out, while the dispersed oil phase progressively deforms from circular to honeycomb-like shapes. The films that separate the oil droplets are observed to thin and break at a critical oil/water ratio, leading to coalescence events. Electrostatic interactions and local droplet rearrangements do not determine film rupture. Instead, the destabilization occurs like an avalanche propagating through the system, starting at areas where the film thickness is smallest.

cond-mat.soft↗

arXiv2021

Creep and drainage in the fast destabilization of emulsions Creep and drainage in the fast destabilization of emulsions

The destabilization of emulsions is important for many applications but remains incompletely understood. We perform squeeze flow measurements on oil-in-water emulsions, finding that the spontaneous destabilization of emulsions is generally very slow under normal conditions, with a characteristic time scale given by the drainage of the continuous phase and the coalescence of the dispersed phase. We show that if the emulsion is compressed between two plates, the destabilization can be sped up significantly; on the one hand, the drainage is faster due to the application of the squeezing force. On the other hand, creep processes lead to rearrangements that also contribute to the destabilization.

cond-mat.soft↗

arXiv2021

Inverted and programmable Poynting effects in metamaterials

The Poynting effect generically manifests itself as the extension of the material in the direction perpendicular to an applied shear deformation (torsion) and is a material parameter hard to design. Unlike isotropic solids, in designed structures, peculiar couplings between shear and normal deformations can be achieved and exploited for practical applications. Here, we engineer a metamaterial that can be programmed to contract or extend under torsion and undergo nonlinear twist under compression. First, we show that our system exhibits a novel type of inverted Poynting effect, where axial compression induces a nonlinear torsion. Then the Poynting modulus of the structure is programmed from initial negative values to zero and positive values via a pre-compression applied prior to torsion. Our work opens avenues for programming nonlinear elastic moduli of materials and tuning the couplings between shear and normal responses by rational design. Obtaining inverted and programmable Poynting effects in metamaterials inspires diverse applications from designing machine materials, soft robots and actuators to engineering biological tissues, implants and prosthetic devices functioning under compression and torsion.

cond-mat.soft↗