arXiv subjects

Daniel Claudino

Publications and source records attributed to Daniel Claudino.

At least 19 recordsLinked to original sources

arXiv2026

Integrating Julia-ITensors into the Tensor Network Quantum Virtual Machine (TNQVM)

The Tensor Network Quantum Virtual Machine (TNQVM) is a high-performance classical circuit simulation backend for the eXtreme-scale ACCelerator (XACC) framework that leverages the Intelligent Tensor (ITensor) library for tensor network--based quantum circuit simulation. However, TNQVM's original C++ ITensor backend is tied to an older integrated release, limiting access to newer tensor network algorithms, diagnostics, and performance improvements available in the actively developed Julia-based ITensors ecosystem. We introduce JuliaITensorTNQVM, an interoperability layer that bridges TNQVM's C++ visitor infrastructure and the Julia-ITensors runtime through a C-compatible application binary interface. This design preserves the existing XACC/TNQVM programming model while enabling access to modern tensor network capabilities, including entanglement entropy diagnostics exposed directly to XACC. We evaluate the implementation through two studies: a Page-curve verification protocol using Haar-random states, and QAOA MaxCut simulations on 3-regular graphs. Within these tested regimes, results are consistent with expected entanglement behavior and established scaling trends, supporting JuliaITensorTNQVM as a practical modernization path for tensor network simulation in TNQVM.

quant-ph↗

arXiv2026

Scaling Sample-Based Quantum Diagonalization on GPU-Accelerated Systems using OpenMP Offload

Hybrid quantum-HPC algorithms advance research by delegating complex tasks to quantum processors and using HPC systems to orchestrate workflows and complementary computations. Sample-based quantum diagonalization (SQD) is a hybrid quantum-HPC method in which information from a molecular Hamiltonian is encoded into a quantum circuit for evaluation on a quantum computer. A set of measurements on the quantum computer yields electronic configurations that are filtered on the classical computer, which also performs diagonalization on the selected subspace and identifies configurations to be carried over to the next step in an iterative process. Diagonalization is the most demanding task for the classical computer. Previous studies used the Fugaku supercomputer and a highly scalable diagonalization code designed for CPUs. In this work, we describe our efforts to enable efficient scalable and portable diagonalization on heterogeneous systems using GPUs as the main compute engines based on the previous work. GPUs provide massive on-device thread-level parallelism that is well aligned with the algorithms used for diagonalization. We focus on the computation of ground-state energies and wavefunctions using the Davidson algorithm with a selected set of electron configurations. We describe the offload strategy, code transformations, and data-movement, with examples of measurements on the Frontier supercomputer and five other GPU accelerated systems. Our measurements show that GPUs provide an outstanding performance boost of order 100x on a per-node basis. This dramatically expedites the diagonalization step-essential for extracting ground and excited state energies-bringing the classical processing time down from hours to minutes.

cs.ET↗

arXiv2025

Analysis of fourth-, fifth-, and infinite-order triple excitations in unitary coupled cluster theory

In this work, we introduce a correction to the unitary coupled cluster method with single and double excitations (UCCSD) that incorporates the effects of missing triple excitations through a treatment that is correct through fifth-order in many-body perturbation theory (MBPT), which we refer to as UCCSD[T-5]. We then benchmark the performance of UCCSD[T-5] alongside the previously developed fourth-order UCCSD[T], comparing both against the infinite-order treatment of triples in UCCSDT as well as full configuration interaction (FCI). Two key findings emerge from this analysis. First, the fourth-order correction in UCCSD[T] consistently provides the closest agreement with FCI in estimating ground state energies, outperforming both UCCSD[T-5] and UCCSDT. Second, the inclusion of fifth-order corrections as in UCCSD[T-5] largely recovers the infinite-order triples limit in UCCSDT. With the growing interest in UCC ans\"atze for quantum computing and the constraints imposed by current quantum hardware, these results underscore the potential of using classically computed perturbative corrections within UCC theory to salient triple excitation effects without requiring the additional quantum resources as would be demanded by the UCCSDT ansatz.

physics.chem-ph↗

arXiv2025

The Role of Quantum Computing in Advancing Scientific High-Performance Computing: A perspective from the ADAC Institute

Quantum computing (QC) has gained significant attention over the past two decades due to its potential for speeding up classically demanding tasks. This transition from an academic focus to a thriving commercial sector is reflected in substantial global investments. While advancements in qubit counts and functionalities continues at a rapid pace, current quantum systems still lack the scalability for practical applications, facing challenges such as too high error rates and limited coherence times. This perspective paper examines the relationship between QC and high-performance computing (HPC), highlighting their complementary roles in enhancing computational efficiency. It is widely acknowledged that even fully error-corrected QCs will not be suited for all computational task. Rather, future compute infrastructures are anticipated to employ quantum acceleration within hybrid systems that integrate HPC and QC. While QCs can enhance classical computing, traditional HPC remains essential for maximizing quantum acceleration. This integration is a priority for supercomputing centers and companies, sparking innovation to address the challenges of merging these technologies. The Accelerated Data Analytics and Computing Institute (ADAC) is comprised of globally leading HPC centers. ADAC has established a Quantum Computing Working Group to promote and catalyze collaboration among its members. This paper synthesizes insights from the QC Working Group, supplemented by findings from a member survey detailing ongoing projects and strategic directions. By outlining the current landscape and challenges of QC integration into HPC ecosystems, this work aims to provide HPC specialists with a deeper understanding of QC and its future implications for computationally intensive endeavors.

quant-ph↗

arXiv2025

Toward the "platinum standard" of quantum chemistry on quantum computers: perturbative quadruple corrections in unitary coupled cluster theory

We propose a non-iterative, post hoc correction to the unitary coupled cluster theory with single, double, and triple excitations (UCCSDT) ansatz, which considers the leading-order effects of neglected quadruple excitations. We present two ways to derive this quadruples correction to UCCSDT, henceforth referred to as [Q-6], which leads to an improvement in the correlation energy shown to be correct through sixth-order in many-body perturbation theory (MBPT). A comparison between the UCC-based [Q-6] correction proposed in this work and analogous, "platinum" standard quadruples corrections proposed in conventional coupled cluster (CC) theory recognizes that [Q-6] is distinct from prior corrections since it is constructed entirely from internally connected components. Although Trotterized (t) and full operator variants of UCCSDT exhibit errors in scans of small molecule potential energy surfaces (PESs) that routinely exceed 1.6 mH, we find that t/UCCSDT[Q-6] is nevertheless able to achieve chemical accuracy as measured by the mean-unsigned error (MUE).

physics.chem-ph↗

arXiv2025

A Perspective on Quantum Computing Applications in Quantum Chemistry using 25--100 Logical Qubits

The intersection of quantum computing and quantum chemistry represents a promising frontier for achieving quantum utility in domains of both scientific and societal relevance. Owing to the exponential growth of classical resource requirements for simulating quantum systems, quantum chemistry has long been recognized as a natural candidate for quantum computation. This perspective focuses on identifying scientifically meaningful use cases where early fault-tolerant quantum computers, which are considered to be equipped with approximately 25--100 logical qubits, could deliver tangible impact. While recent advances in classical computing have pushed the boundaries of tractable simulations to unprecedented scales, this logical-qubit regime represents the first window where quantum devices can pursue qualitatively distinct strategies, such as polynomial-scaling phase estimation, direct simulation of quantum dynamics, and active-space embedding, that remain challenging for classical solvers, for instance, multireference charge-transfer and conical-intersection states central to photochemistry and materials design. We highlight near-term opportunities in algorithm and software design, discuss representative chemical problems suited for quantum acceleration, and propose strategic roadmaps and collaborative pathways for advancing practical quantum utility in quantum chemistry.

quant-ph↗

arXiv2025

Qubit-efficient quantum chemistry with the ADAPT variational quantum eigensolver and double unitary downfolding

In this work, we combine the recently developed double unitary coupled cluster (DUCC) theory with the adaptive, problem-tailored variational quantum eigensolver (ADAPT-VQE) to explore accuracy of unitary downfolded Hamiltonians for quantum simulation of chemistry. We benchmark the ability of DUCC effective Hamiltonians to recover dynamical correlation energy outside of an active space. We consider the effects of strong correlation, commutator truncation, higher-body terms, and approximate external amplitudes on the accuracy of these effective Hamiltonians. When combining these DUCC Hamiltonians with ADAPT-VQE, we observe similar convergence of the ground state as compared to bare active space Hamiltonians, demonstrating that DUCC Hamiltonians provide increased accuracy without increasing the load on the quantum processor.

quant-ph↗

arXiv2025

Bridging Paradigms: Designing for HPC-Quantum Convergence

This paper presents a comprehensive software stack architecture for integrating quantum computing (QC) capabilities with High-Performance Computing (HPC) environments. While quantum computers show promise as specialized accelerators for scientific computing, their effective integration with classical HPC systems presents significant technical challenges. We propose a hardware-agnostic software framework that supports both current noisy intermediate-scale quantum devices and future fault-tolerant quantum computers, while maintaining compatibility with existing HPC workflows. The architecture includes a quantum gateway interface, standardized APIs for resource management, and robust scheduling mechanisms to handle both simultaneous and interleaved quantum-classical workloads. Key innovations include: (1) a unified resource management system that efficiently coordinates quantum and classical resources, (2) a flexible quantum programming interface that abstracts hardware-specific details, (3) A Quantum Platform Manager API that simplifies the integration of various quantum hardware systems, and (4) a comprehensive tool chain for quantum circuit optimization and execution. We demonstrate our architecture through implementation of quantum-classical algorithms, including the variational quantum linear solver, showcasing the framework's ability to handle complex hybrid workflows while maximizing resource utilization. This work provides a foundational blueprint for integrating QC capabilities into existing HPC infrastructures, addressing critical challenges in resource management, job scheduling, and efficient data movement between classical and quantum resources.

quant-ph↗

arXiv2025

Quantum-Centric Algorithm for Sample-Based Krylov Diagonalization

Approximating the ground state of many-body systems is a key computational bottleneck underlying important applications in physics and chemistry. The most widely known quantum algorithm for ground state approximation, quantum phase estimation, is out of reach of current quantum processors due to its high circuit-depths. Subspace-based quantum diagonalization methods offer a viable alternative for pre- and early-fault-tolerant quantum computers. Here, we introduce a quantum diagonalization algorithm which combines two key ideas on quantum subspaces: a classical diagonalization based on quantum samples, and subspaces constructed with quantum Krylov states. We prove that our algorithm converges in polynomial time under the working assumptions of Krylov quantum diagonalization and sparseness of the ground state. We then demonstrate the scalability of our approach by performing the largest ground-state quantum simulation of impurity models using a Heron quantum processors and the Frontier supercomputer. We consider both the single-impurity Anderson model with 41 bath sites, and a system with 4 impurities and 7 bath sites per impurity. Our results are in excellent agreement with Density Matrix Renormalization Group calculations.

quant-ph↗

arXiv2024

Ancillary entangling Floquet kicks for accelerating quantum algorithms

Quantum simulation with adiabatic annealing can provide insight into difficult problems that are impossible to study with classical computers. However, it deteriorates when the systems scale up due to the shrinkage of the excitation gap and thus places an annealing rate bottleneck for high success probability. Here, we accelerate quantum simulation using digital multi-qubit gates that entangle primary system qubits with the ancillary qubits. The practical benefits originate from tuning the ancillary gauge degrees of freedom to enhance the quantum algorithm's original functionality in the system subspace. For simple but nontrivial short-ranged, infinite long-ranged transverse-field Ising models, and the hydrogen molecule model after qubit encoding, we show improvement in the time to solution by one hundred percent but with higher accuracy through exact state-vector numerical simulation in a digital-analog setting. The findings are further supported by time-averaged Hamiltonian theory.

quant-ph↗

arXiv2024

An attractive way to correct for missing singles excitations in unitary coupled cluster doubles theory

Coupled cluster methods based exclusively on double excitations are comparatively "cheap" and interesting model chemistries, as they are typically able to capture the bulk of the dynamical electron correlation effects. The trade-off in such approximations is that the effect of neglected excitations, particularly single excitations, can be considerable. Using standard and electron pair-restricted $T_2$ operators to define two flavors of unitary coupled cluster doubles (UCCD) methods, we investigate the extent in which missing single excitations can be recovered from low-order corrections in many-body perturbation theory (MBPT) within the unitary coupled cluster (UCC) formalism. Our analysis includes the derivations of finite-order, UCC energy functionals which are used as a basis to define perturbative estimates of missed single excitations. This leads to the novel UCCD[4S] and UCCD[6S] methods, which consider energy corrections for missing singles excitations through fourth- and sixth-order in MBPT, respectively. We also apply the same methodology to the electron pair-restricted ansatz, but the improvements are only marginal. Our findings show that augmenting UCCD with these post hoc perturbative corrections can lead to UCCSD-quality results.

quant-ph↗

arXiv2024

Parallel Quantum Computing Simulations via Quantum Accelerator Platform Virtualization

Quantum circuit execution is the central task in quantum computation. Due to inherent quantum-mechanical constraints, quantum computing workflows often involve a considerable number of independent measurements over a large set of slightly different quantum circuits. Here we discuss a simple model for parallelizing simulation of such quantum circuit executions that is based on introducing a large array of virtual quantum processing units, mapped to classical HPC nodes, as a parallel quantum computing platform. Implemented within the XACC framework, the model can readily take advantage of its backend-agnostic features, enabling parallel quantum circuit execution over any target backend supported by XACC. We illustrate the performance of this approach by demonstrating strong scaling in two pertinent domain science problems, namely in computing the gradients for the multi-contracted variational quantum eigensolver and in data-driven quantum circuit learning, where we vary the number of qubits and the number of circuit layers. The latter (classical) simulation leverages the cuQuantum SDK library to run efficiently on GPU-accelerated HPC platforms.

quant-ph↗

arXiv2024

Rethinking Programming Paradigms in the QC-HPC Context

Programming for today's quantum computers is making significant strides toward modern workflows compatible with high performance computing (HPC), but fundamental challenges still remain in the integration of these vastly different technologies. Quantum computing (QC) programming languages share some common ground, as well as their emerging runtimes and algorithmic modalities. In this short paper, we explore avenues of refinement for the quantum processing unit (QPU) in the context of many-tasks management, asynchronous or otherwise, in order to understand the value it can play in linking QC with HPC. Through examples, we illustrate how its potential for scientific discovery might be realized.

quant-ph↗

arXiv2024

Logical Error Rates for a [[4,2,2]]-Encoded Variational Quantum Eigensolver Ansatz

Quantum computing offers a potential for algorithmic speedups for applications, such as large-scale simulations in chemistry and physics. However, these speedups must yield results that are sufficiently accurate to predict realistic outcomes of experiments precisely. Delivering on the promise of high accuracy and precision requires methods to evaluate the computational accuracy of the quantum computing devices. We develop a framework to estimate the computational accuracy of near-term noisy, intermediate scale quantum (NISQ) computing devices using a quantum chemistry application. Application benchmarks that run on NISQ devices require techniques for mitigating errors to improve accuracy and precision. We use device agnostic error-mitigation schemes, quantum error detection and readout error detection, with post-selection to mitigate the dominant sources of noise. We evaluate the framework by simulating the ground state of molecular hydrogen with the variational quantum eigensolver (VQE) algorithm, estimating the energy and calculating the precision of the estimate using numerical simulations with realistic noise models. We first quantify the improvement in the logical error rate and state fidelity of the VQE application when encoded with the [[4,2,2]] quantum error detection code. When additionally encoded with readout error detection, we show that compared to the unencoded simulation, the encoded simulation yields a more accurate estimate by more than 1 mHa (0.027 eV) with comparable precision and higher state fidelity. Additionally, unlike the best estimate from the unencoded simulations, the results from the encoded simulation fall within the chemical accuracy threshold of 1.6 mHa of the exact energy. The estimated accuracy and precision indicate that current quantum computers can achieve error rates that yield useful outcomes for chemical applications.

quant-ph↗

arXiv2024

A Cross-Platform Execution Engine for the Quantum Intermediate Representation

Hybrid languages like the quantum intermediate representation (QIR) are essential for programming systems that mix quantum and conventional computing models, while execution of these programs is often deferred to a system-specific implementation. Here, we develop the QIR Execution Engine (QIR-EE) for parsing, interpreting, and executing QIR across multiple hardware platforms. QIR-EE uses LLVM to execute hybrid instructions specifying quantum programs and, by design, presents extension points that support customized runtime and hardware environments. We demonstrate an implementation that uses the XACC quantum hardware-accelerator library to dispatch prototypical quantum programs on different commercial quantum platforms and numerical simulators, and we validate execution of QIR-EE on IonQ, Quantinuum, and IBM hardware. Our results highlight the efficiency of hybrid executable architectures for handling mixed instructions, managing mixed data, and integrating with quantum computing frameworks to realize cross-platform execution.

quant-ph↗

arXiv2024

Quantum Computing: Vision and Challenges

The recent development of quantum computing, which uses entanglement, superposition, and other quantum fundamental concepts, can provide substantial processing advantages over traditional computing. These quantum features help solve many complex problems that cannot be solved otherwise with conventional computing methods. These problems include modeling quantum mechanics, logistics, chemical-based advances, drug design, statistical science, sustainable energy, banking, reliable communication, and quantum chemical engineering. The last few years have witnessed remarkable progress in quantum software and algorithm creation and quantum hardware research, which has significantly advanced the prospect of realizing quantum computers. It would be helpful to have comprehensive literature research on this area to grasp the current status and find outstanding problems that require considerable attention from the research community working in the quantum computing industry. To better understand quantum computing, this paper examines the foundations and vision based on current research in this area. We discuss cutting-edge developments in quantum computer hardware advancement and subsequent advances in quantum cryptography, quantum software, and high-scalability quantum computers. Many potential challenges and exciting new trends for quantum technology research and development are highlighted in this paper for a broader debate.

cs.DC↗

arXiv2024

A new "gold standard": perturbative triples corrections in unitary coupled cluster theory and prospects for quantum computing

A major difficulty in quantum simulation is the adequate treatment of a large collection of entangled particles, synonymous with electron correlation in electronic structure theory, with coupled cluster (CC) theory being the leading framework in dealing with this problem. Augmenting computationally affordable low-rank approximations in CC theory with a perturbative account of higher-rank excitations is a tractable and effective way of accounting for the missing electron correlation in those approximations. This is perhaps best exemplified by the "gold standard" CCSD(T) method, which bolsters the baseline CCSD with effects of triple excitations using considerations from many-body perturbation theory (MBPT). Despite this established success, such a synergy between MBPT and the unitary analog of CC theory (UCC) has not been explored. In this work, we propose a similar approach wherein converged UCCSD amplitudes, which can be obtained on a quantum computer, are leveraged by a classical computer to evaluate energy corrections associated with triple excitations - leading to the UCCSD[T] and UCCSD(T*) methods. The rationale behind these choices is shown to be rigorous by studying the properties of finite-order UCC energy functionals. Although our efforts do not support the addition of the fifth-order contribution as in the (T) correction, comparisons are nevertheless made using a hybrid UCCSD(T) approach. We assess the performance of these approaches on a collection of small molecules, and demonstrate the benefits of harnessing the inherent synergy between MBPT and UCC theories.

physics.chem-ph↗

arXiv2023

Quantum Simulation of Boson-Related Hamiltonians: Techniques, Effective Hamiltonian Construction, and Error Analysis

A broad spectrum of physical systems in condensed-matter and high-energy physics, vibrational spectroscopy, and circuit and cavity QED necessitates the incorporation of bosonic degrees of freedom, such as phonons, photons, and gluons, into optimized fermion algorithms for near-future quantum simulations. In particular, when a quantum system is surrounded by an external environment, its basic physics can usually be simplified to a spin or fermionic system interacting with bosonic modes. Nevertheless, troublesome factors such as the magnitude of the bosonic degrees of freedom typically complicate the direct quantum simulation of these interacting models, necessitating the consideration of a comprehensive plan. This strategy should specifically include a suitable fermion/boson-to-qubit mapping scheme to encode sufficiently large yet manageable bosonic modes, and a method for truncating and/or downfolding the Hamiltonian to the defined subspace for performing an approximate but highly accurate simulation, guided by rigorous error analysis. In this pedagogical tutorial review, we aim to provide such an exhaustive strategy, focusing on encoding and simulating certain bosonic-related model Hamiltonians, inclusive of their static properties and time evolutions. Specifically, we emphasize two aspects: (1) the discussion of recently developed quantum algorithms for these interacting models and the construction of effective Hamiltonians, and (2) a detailed analysis regarding a tightened error bound for truncating the bosonic modes for a class of fermion-boson interacting Hamiltonians.

quant-ph↗