arXiv subjects

Daniel D. Brown

Publications and source records attributed to Daniel D. Brown.

13 recordsLinked to original sources

arXiv2026

GNSS-free quantum gravity-aided navigation and fine-scale marine surveying with a strapdown quantum gravimeter

Global navigation satellite systems (GNSS) are often disrupted or unavailable at sea, and unaided inertial navigation systems (INS) drift without correction. Quantum-sensing-based gravity map matching offers a passive, infrastructure-free aid, but field demonstrations of GNSS-free quantum gravimetric navigation have not been reported. Here we perform gravity map matching and fine-resolution gravity survey with a mobile quantum gravimeter aboard a 29 m surface vessel. We hybridize an atomic sensor with a classical accelerometer for bias stabilization and independently mechanize a navigation-grade IMU, all installed in an uncontrolled cabin with no environmental stabilization or calibration. Operated in both gimbaled and strapdown configurations over identical traversals, the hybrid sensor corrected the inertial solution over an 83 km maritime trajectory by referencing locally measured gravity to a satellite-derived anomaly map. Gravity-aiding constrains INS drift and delivers bounded positioning at nautical-mile-level accuracy, with GNSS excluded throughout the measurement chain. In a separate GNSS-referenced mode, the same system surveyed coastal routes up to Sea State 4, achieving mGal-level agreement with gravimetric maps and sub-mGal repeatability and stability, with gimbaled and strapdown operation performing comparably. Resolved anomalies reach an along-track scale of ~300 m, 50X finer than the satellite map's half-power wavelength. A 56 h stationary test shows atom referencing lowers long-term drift ~70X versus the classical channel alone. These results provide the first same-instrument comparison of gimbaled and strapdown mobile quantum gravimetry and the first fully GNSS-independent gravity-map-matching navigation demonstration using a quantum gravimeter, pointing toward compact, autonomous-platform-ready quantum sensing for GNSS-denied maritime navigation and survey.

quant-ph↗

arXiv2025

A matter of perspective: how nanoscale optical defects limit cosmic-scale gravitational wave observations

Ground-based gravitational-wave (GW) detectors, such as LIGO, Virgo, and KAGRA, have revolutionised as- tronomy. Now, future detectors like the Einstein Telescope and Cosmic Explorer aim to achieve even greater sensitivity. Advanced optical simulations are crucial to overcoming the challenges faced by these complex in- terferometers. Finesse, the leading interferometer simulation tool in the GW community, supports the design and commissioning of these detectors by modeling optical, quantum, and mechanical effects. A key focus is understanding optical defects that distort the shape of the laser light and limit detector performance. This work explores how nanoscale defects affect GW observations and presents recent advancements in modeling their effects to guide the development of next-generation detector optics.

physics.optics↗

arXiv2023

Transverse Mode Control in Quantum Enhanced Interferometers: A Review and Recommendations for a New Generation

Adaptive optics has made significant advancement over the past decade, becoming the essential technology in a wide variety of applications, particularly in the realm of quantum optics. One key area of impact is gravitational-wave detection, where quantum correlations are distributed over kilometer-long distances by beams with hundreds of kilowatts of optical power. Decades of development were required to develop robust and stable techniques to sense mismatches between the Gaussian beams and the resonators, all while maintaining the quantum correlations. Here we summarize the crucial advancements in transverse mode control required for gravitational-wave detection. As we look towards the advanced designs of future detectors, we highlight key challenges and offer recommendations for the design of these instruments. We conclude the review with a discussion of the broader application of adaptive optics in quantum technologies: communication, computation, imaging and sensing.

physics.optics↗

arXiv2023

Single and coupled cavity mode sensing schemes using a diagnostic field

Precise optical mode matching is of critical importance in experiments using squeezed-vacuum states. Automatic spatial-mode matching schemes have the potential to reduce losses and improve loss stability. However, in quantum-enhanced coupled-cavity experiments, such as gravitational-wave detectors, one must also ensure that the sub-cavities are also mode matched. We propose a new mode sensing scheme, which works for simple and coupled cavities. The scheme requires no moving parts, nor tuning of Gouy phases. Instead a diagnostic field tuned to the HG20/LG10 mode frequency is used. The error signals are derived to be proportional to the difference in waist position, and difference in Rayleigh ranges, between the sub-cavity eigenmodes. The two error signals are separable by 90 degrees of demodulation phase. We demonstrate reasonable error signals for a simplified Einstein Telescope optical design. This work will facilitate routine use of extremely high levels of squeezing in current and future gravitational-wave detectors.

physics.optics↗

arXiv2021

Modal decomposition of complex optical fields using convolutional neural networks

Recent studies have shown convolutional neural networks (CNNs) can be trained to perform modal decomposition using intensity images of optical fields. A fundamental limitation of these techniques is that the modal phases can not be uniquely calculated using a single intensity image. The knowledge of modal phases is crucial for wavefront sensing, alignment and mode matching applications. Heterodyne imaging techniques can provide images of the transverse complex amplitude & phase profile of laser beams at high resolutions and frame rates. In this work we train a CNN to perform modal decomposition using simulated heterodyne images, allowing the complete modal phases to be predicted. This is to our knowledge the first machine learning decomposition scheme to utilize complex phase information to perform modal decomposition. We compare our network with a traditional overlap integral & center-of-mass centering algorithm and show that it is both less sensitive to beam centering and on average more accurate.

physics.optics↗

arXiv2021

Point absorbers in Advanced LIGO

Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nano-meter scale thermo-elastic deformations and substrate lenses from these micron-scale absorbers significantly reduces the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback control system. We review the expected surface deformation from point absorbers and provide a pedagogical description of the impact on power build-up in second generation gravitational wave detectors (dual-recycled Fabry-Perot Michelson interferometers). This analysis predicts that the power-dependent reduction in interferometer performance will significantly degrade maximum stored power by up to 50% and hence, limit GW sensitivity, but suggests system wide corrections that can be implemented in current and future GW detectors. This is particularly pressing given that future GW detectors call for an order of magnitude more stored power than currently used in Advanced LIGO in Observing Run 3. We briefly review strategies to mitigate the effects of point absorbers in current and future GW wave detectors to maximize the success of these enterprises.

physics.ins-det↗

arXiv2021

Differential wavefront sensing and control using radio-frequency optical demodulation

Differential wavefront sensing is an essential technique for optimising the performance of many precision interferometric experiments. Perhaps the most extensive application of this is for alignment sensing using radio-frequency beats measured with quadrant photodiodes. Here we present a new technique that uses optical demodulation to measure such optical beats at significantly higher resolutions using commercial laboratory equipment. We experimentally demonstrate that the images captured can be digitally processed to generate wavefront error signals and use these in a closed loop control system for correct wavefront errors for alignment and mode-matching a beam into an optical cavity to 99.9\%. This experiment paves the way for the correction of even higher order errors when paired with higher order wavefront actuators. Such a sensing scheme could find use in optimizing complex interferometers consisting of coupled cavities, such as those found in gravitational wave detectors, or simply just for sensing higher order wavefront errors in heterodyne interferometric table-top experiments.

physics.ins-det↗

arXiv2020

Pykat: Python package for modelling precision optical interferometers

\textsc{Pykat} is a Python package which extends the popular optical interferometer modelling software \textsc{Finesse}. It provides a more modern and efficient user interface for conducting complex numerical simulations, as well as enabling the use of Python's extensive scientific software ecosystem. In this paper we highlight the relationship between \textsc{Pykat} and \textsc{Finesse}, how it is used, and provide an illustrative example of how it has helped to better understand the characteristics of the current generation of gravitational wave interferometers.

astro-ph.IM↗

arXiv2019

Simplified optical configuration for a sloshing-speedmeter-enhanced gravitational wave detector

We propose a new optical configuration for an interferometric gravitational wave detector based on the speedmeter concept using a sloshing cavity. Speedmeters provide an inherently better quantum-noise limited sensitivity at low frequencies than the currently used Michelson interferometers. We show that a practical sloshing cavity can be added relatively simply to an existing dual-recycled Michelson interferometer such as Advanced LIGO.

gr-qc↗

arXiv2019

An optical lock-in camera for advanced gravitational wave interferometers

Knowledge of the intensity and phase profiles of spectral components in a coherent optical field is critical for a wide range of high-precision optical applications. One of these is interferometric gravitational wave detectors, which rely on such fields for precise control of the experiment. Here we demonstrate a new device, an \textit{optical lock-in camera}, and highlight how they can be used within a gravitational wave interferometer to directly image fields at a higher spatial and temporal resolution than previously possible. This improvement is achieved using a Pockels cell as a fast optical switch which transforms each pixel on a sCMOS array into an optical lock-in amplifier. We demonstrate that the optical lock-in camera can image fields with 2~Mpx resolution at 10~Hz with a sensitivity of -62~dBc when averaged over 2s.

astro-ph.IM↗

arXiv2017

Broadband sensitivity enhancement of detuned dual-recycled Michelson interferometers with EPR entanglement

We demonstrate the applicability of the EPR entanglement squeezing scheme for enhancing the shot-noise-limited sensitivity of a detuned dual-recycled Michelson interferometers. In particular, this scheme is applied to the GEO\,600 interferometer. The effect of losses throughout the interferometer, arm length asymmetries, and imperfect separation of the signal and idler beams are considered.

quant-ph↗

arXiv2017

Multi-spatial-mode effects in squeezed-light-enhanced interferometric gravitational wave detectors

Proposed near-future upgrades of the current advanced interferometric gravitational wave detectors include the usage of frequency dependent squeezed light to reduce the current sensitivity-limiting quantum noise. We quantify and describe the degradation effects that spatial mode-mismatches between optical resonators have on the squeezed field. These mode-mismatches can to first order be described by scattering of light into second-order Gaussian modes. As a demonstration of principle, we also show that squeezing the second-order Hermite-Gaussian modes $\mathrm{HG}_{02}$ and $\mathrm{HG}_{20}$, in addition to the fundamental mode, has the potential to increase the robustness to spatial mode-mismatches. This scheme, however, requires independently optimized squeeze angles for each squeezed spatial mode, which would be challenging to realise in practise.

physics.optics↗

arXiv2016

Phase shift in atom interferometry due to spacetime curvature

We present a single-source dual atom interferometer and utilize it as a gradiometer for precise gravitational measurements. The macroscopic separation between interfering atomic wave packets (as large as 16 cm) reveals the interplay of recoil effects and gravitational curvature from a nearby Pb source mass. The gradiometer baseline is set by the laser wavelength and pulse timings, which can be measured to high precision. Using a long drift time and large momentum transfer atom optics, the gradiometer reaches a resolution of $3 \times 10^{-9}$ s$^{-2}$ per shot and measures a 1 rad phase shift induced by the source mass.

physics.atom-ph↗